Day 2 Of Training With BASF Glasurit 100 Line

[@class5bodyworks]

Nice to see Patrick smiling today. He must have realized he's not training a rookie.😂

[@kandyman5315]

Lol

[@jimprovax6846]

Dude those panels look so slick. I know you’re a perfectionist. Patrick should be extremely pleased. Once again the Kandy Man hits it out of the park. Time for a cold one.

[@kandyman5315]

Thank you 👊

[@anttikorhonen4990]

Day 3 kandy man is teaching and Patrick is learning...nice work as always...

[@kandyman5315]

Lol👊

[@raymondrodriguez1158]

Hey brother thanks again am watching all the week of your training. Listen am hype and learning.

[@JR-ho5qm]

Looking great! I have to say I have been spraying Standox 1.5 coat waterborne since it was first introduced to North America. Everyone was against the 1.5 coat system then. Now both PPG and BASF offer it. Not sure on PPG but it looks like BASF did a really good job with the 100 line. 👍🏻 the 1.5 coat process is extremely nice to work with

[@kandyman5315]

This stuff is impressive 👏

[@judih.8754]

Impressive Kandy Man!

[@joescrewdriver9000]

That’s cool about the flash time. That was my curiosity. Appreciate all the detail.

[@roostercogburn8175]

WOW....Great Job bro..That black looks incredible

[@kandyman5315]

Thank you

[@steverude7386]

Love seeing the use of Festool sanding system. So little dust and paper does not gum up and glaze panel. Keeping it clean.

[@kandyman5315]

Great point!

[@scottstapel5889]

I really miss that clear! The Glamour Gloss clear was my favorite for sure. Great Vids!

[@kandyman5315]

Great product

[@noahjakresky7825]

I’m 19 but I inspire to be like you in the trade, you are insane brotha

[@kevinhekers2380]

Looks amazing kandyman , could you perhaps in the future give us a shop tour video i am new to your channel and i always like to see how different shops are organized and kitted out , keep up the great work 👍

[@Kustompaint2026]

Absolutely PHENOMENAL paint jobs!!

[@snaswedey]

Am not even a painter, am a rattle can warrior (for 30 years). However, i find this so intressting and addictive to watch. Even if it shouldnt be, there is always something i can learn

[@TorgeirFredriksen]

Damn, those panels really shined. Very well done.

[@goti36]

nice mirror finish on the panels. Best job ever

[@772777777777777]

You need to make video on dailing in your gun for glasse clears... how much reduce need vs to much vs psi issues do this on a old hood pls

[@lesglover6515]

I'm enjoying the hell out of these videos. I've been looking at the hundred line for 7 or 8 months now. And it looks like you've got it nailed down already!

[@kandyman5315]

It's 💪going well

[@joescrewdriver9000]

I agree on the chrome coat. It was wild to watch on the video seeing the stripes disappear on the control coat. Seems like you would use a lot more paint that way. Over all looks good. I love the card idea. Start your own library. 😂

[@juhis6969]

Wow, you are the master💯💯

[@michaelbyrnes7944]

Glasurit is the best to match and blend out

[@nickcrill7718]

I watch two other channels that spray the 100 line. The speed of piling all that base on in 1 coat looks nice to me like you said you’re not hanging over it causing more dirt. Seems overall faster

[@deanbrown7643]

👌way to go k man beautiful finish onwards and upwards bruh

[@kandyman5315]

Appreciate it

[@fraserthomson5766]

12:28 that's is right there! "You gotta get it wet, man!" 😎

[@JohnWD40TC02]

Well you've outdone yourself on this one Kandy Man the finish you got on both jobs here is superb they are flat as you like and the gloss is off the chart👌if you are getting jobs like this out after two days then a couple of weeks down the line you'll be able to do it in your sleep👏 fantastic progress💯🙏👍John UK

[@kandyman5315]

Thanks John 👊

[@vicforreal7503]

I wish my shop had this style booth we got a old cross draft booth but I get awesome result!!! lol I just get in my head like candy man gets no dirt!!! or nibs but im sure you do! minor stuff! nice booth!!!!! Im jealous! you got this brother!

[@HackMasterBlaster]

I love these videos. I’m jealous. Seems like really good quality product.

[@kandyman5315]

They are!

[@andypocs7061]

Looks excellent it would be hard for me to get myself to spray the base coat that wet

[@NDB390]

Looks great. Just had to trick the brain to slow down and learn a new muscle memory. You are nailing it.

[@kandyman5315]

Yes 👍

[@roymoxley2587]

I love Glasurit it’s the best I painted my s10 Chevy in 1992 it was my truck , and I wet sanded and buffed the whole damn truck, Guns I had were the worst so I had to buff it to get the mirror finish

[@V1CSTAA]

Beautiful. I’m hoping you guys have a 3 stage lined up want to see how your rep is going to have you do it

[@kandyman5315]

I hope so too!

[@lsbrushnpaint5847]

Very clean n good

[@stipq076]

Where I work we use glasurit 90 and 93 line which is a lil bit outdated, but we have spray cards and they match almost every time , You should ask Patrick. I would scan color with my scanner get the paint colour and check the spray card . Will make a video on my channel

[@ExFilHobbies]

Great video. When can I stop by and see it live? I live in Sarasota and would love to know if you do in person training classes?

[@gregoryjowers3629]

Looks great Kandy man treyster uses the 100 line he a good paint channel too

[@kandyman5315]

Right on

[@ntonytay]

Great one kandyman. Can you show us a closer look on the spray out with the panel? And if in the near future we can have a good look whether its blendable or panel match it with this 100line. Especially silver. Thanks

[@donproctor4480]

Wet seems to be the trick with this system, I remember when the trainers were here, we were spraying solvent (onyx hd) & he said, “spray it wetter”, cause I was spraying it the same way I did with dbc, he took the gun and wet it like you did, over 10 min old sealer, I cringe as I waited for it to blister, I didn’t. It’s the same way on the water version of it to. Crazy how this works. I will tell you, assuming 100 line is the same, the candy jobs become a 3 stage instead of the dye in the clear, makes life so much easier. Look forward to the rest of the week updates. Also, the camera is really good, I haven’t had a bad color match yet, and that includes a 70% match once. 😬 I did learn with the that the higher the adjustment on a camera shot, the lighter it can be, but also lean yesterday on how the red, blue and green lines work. Tell your thanks. 👍

[@donproctor4480]

Btw, yiu know how hard it is to find any training videos with basf/onyx or guys using it? I posted to hours of the stando blue channel😂😂😂

[@bodyshopsolutions695]

I’ve been trying to tell you for awhile! Everything else is sub par! They will be releasing their one coat glasurit clear soon! Just think about it.. a sealer coat, one coat of base, one coat of clear! All you need now to be on my level of production is the UV Fastlane 2k! You’d be shocked how much more you can get done lol! Nice work today! Those were easy jobs though.. can’t wait for tomorrow

[@kandyman5315]

I'm on it .you weren't kidding

[@bullypridekennels2165]

On the blends. did they want you to hold the gun at a 45 agree angle? I found it tricky at first to blend in the middle of a panel tight blends I tried wet bed in front and behind the area, and the pull back and effect behind the blend area worked well for me

[@kandyman5315]

Yes

[@Lawnfella]

Wet bed only in blend area and not the whole panel?

[@kandyman5315]

👍

[@772777777777777]

Question do you add any reducer to your clear coats whether it's the tack coat or the last coat... if so how much.

[@carloscardenas-fn1nx]

Nice brother, very good job. You are a great person and a really good painter ,there's not a difficult line for you. It's a very nice job .I know now is late for an answer, but what you suggest me to switch to NXT or Envirobase ,I had Deltron base right now. Thanks.

[@kandyman5315]

In ppg envirobase. But this stuff is nice

[@carloscardenas-fn1nx]

Thanks for taking the time to reply, brother. I know you are a busy guy really appreciate it. Like I mentioned on you first video with glasurit ,I love Diamond with is polyester base We still having it in the shop but we although have Deltron which is given me hard time to match so the want me to try NXT or Eviro base we Have an across draft booth without heaters they told me that is not a problem it should work with the magnetic air dryers on the wall ,let see how the Enviro works for me I use to used Standox water born 10 years ago and cover and match nice but I never try anything different on water let see what happens, thanks a lot my best wishes with the paint you are great painter.

[@carloscardenas-fn1nx]

Yeah, man, the result is visible it looks like a glass .

[@leonelribeiro3847]

Here in Australia, BASF technicians say not to take the wet bed to the edges because it changes the color

[@kandyman5315]

👍

[@kiranm25x]

What the measured paint micron thickness of BASF with paint depth gauge coming to on a fresh panel?

[@kandyman5315]

Base cost.05 clear minimum 2.0 mills

[@marklynsmith3510]

So what your personal views on the clear but if u want a slower clear ask for 923-255.which has a bigger window

[@kandyman5315]

Love it

[@guillermoreyes4236]

Nice job!! Like always. Hey brother I have a 2000 BMW z3 M Coupe that I would like to reespray (imola red ). I will need some advice.

[@roymoxley2587]

What is the wet bed coat Yes I’m way out of this technology never heard of it

[@kandyman5315]

It is a clear base for the color to land in

[@tonyny708]

It’s sprays the same way as Spies Heckler water born paint.

[@amtrindle]

Did you ever get a chance to try the t4900 one visit additive before you left PPG?

[@kandyman5315]

Did not sorry

[@chriskiley7207]

You mentioned a unforgettable odor to the clear, what does it smell like?

[@kandyman5315]

Sweet smell

[@dustinwolford8203]

Man you can’t beat those BASF clears! How long of a flash time do they recommend before clear?

[@kandyman5315]

I gave it 8 min flash

[@Stingyduce]

What was that clear plastic wrap ??

[@kandyman5315]

On what part of the video

[@Stingyduce]

@@kandyman53157:43

[@joe2.017]

Lets go!

[@Eazyscustoms]

question KM, it seems like you have a nice camera. Any reason for only uploading your videos in 720p? We want to see you in action in HD

[@kandyman5315]

Should be hd can't use my good camera when in booth don't want to OVERSPRAY it👊

[@ikipearl]

I guess his tip on hanging hose over shoulder when clearing not 4 u

[@ikipearl]

lovely, awesome to see you take pride in your work ... and any product that makes that easier🙏

[@FlyEaglesFly19111]

I'm not a paint guy. But is a harder paint or clear better? I would think harder is more brittle. Am I wrong? Enjoy the content. Thanks for sharing.

[@class5bodyworks]

Generally, the faster production clears are more brittle and more prone to chips.

[@kandyman5315]

Not hard like that, just meaning quicker to biff

[@simuncelic7420]

I have been spraying P-C 20 glasurit clear it's 2:1 and 10% reducer and It got me confused if I don't leave it like for 15 20 min it will have solvent pop but if I do like tds says 3 min flash off time it's too soon and i often get runs. If you have any advice for me i would appreciate it.

[@kandyman5315]

Not familiar with that number

[@simuncelic7420]

@@kandyman5315 Maybe it just for european market. It's like better quality clear.

[@rynorebuilds5653]

Where do you get your stands?

[@kandyman5315]

Innovative tools

[@scottherr642]

DAMN!

[@boblawson4950]

216 is your friend.

[@angelopatafio8347]

did you ask Pat if hes from spies ?

[@kandyman5315]

He's worked with spies in Rhode Island

[@angelopatafio8347]

@@kandyman5315 i think he was a class in connecticut for spies i went too.

[@javiermercado5221]

LFG!!! You are going to need to add some texture. It's too flat.

[@kandyman5315]

💪💯💯👊👊

[@juhis6969]

😂

[@premnathsamjahwan6616]

It looks like the clear is laying down flatter. 🤷🏾‍♂️

[@jayonbikes4271]

💯🔥🔥🔥

[@DSPAINTWORKZ]

I've been on BASF for over 10 years im on 90 line water . I promise after a month you won't ever look at chips . You will use 100% camera. I've maybe done 8-10 spray out cards in over 10 years.

[@kandyman5315]

Sounds good 👍

[@joshzimmer]

I agree I was on 90line for roughly the same time until 2 years ago and the camera was so accurate and reliable. Now I'm using sikkens and the camera is useless, it can say it's a good match on the system and you put it down and it's terrible. I think a big part of it being so unreliable is because it doesn't give you an option to choose adjusted or non adjusted

[@DSPAINTWORKZ]

@@joshzimmer we did demo with sikkens did ok definitely was BASF

[@JesusOrtiz-qp1so]

I don’t know if is just me but I can see a lot of orange peel with this new paint and clear when you were spraying with ppe jobs was coming out super shiny with minimum peel

[@kandyman5315]

Lol

[@JesusOrtiz-qp1so]

Yeah lol because you know is true

[@kandyman5315]

@JesusOrtiz-qp1so no your wrong

[@The-truth-is-valuable.]

Again.... There is no such thing as a perfectionist: Only people with high and good standards, and those with crap standards: I knew a camera can be misleading, but these panels turned out really, really well.

[@JR-ho5qm]

First!

[@joe2.017]

Seems like a downside to have to make your own spray out library

[@lotus.whisperer]