Dealing With My Canaan Avalon Nano 3 Issues

[@chrishabgood8900]

I have 3 and all 3 have stopped working at around 23 or so days. i reboot and it works fine.

[@wtxbucc]

Thank You! I haven't been able to get my 3 Nano's working and am not "tec" enough to figure it out! Hopefully this will help me get them up and running! Also going to be mining BTH

[@electricbloke]

You should really start by going on the website "mining pool stats", and click on BCH, and you'll see a choice of mining pools, then click on whichever choice you like the look of, and follow the instructions. It's just a case of adding a mining pool address, and your BCH wallet address to mine to, either in the Avalon phone app, or by entering your Nano I.P address into your Web browser, which will reveal a dashboard (called a GUI) where you can input your details there.

[@RainBitcoins]

Why....what issues are you having? We need to get you up and running.

[@dnog1999]

I haven't either. After a month of trying all sorts of pools and settings I gave up. Can't recommend buying these at all. I'm no expert but am running other miners just fine. It just does not connect to any pool on both of my Nanos.

[@RainBitcoins]

@@dnog1999 because your entering the wrong pool information or your trying to mine a non sha256 coin.... What coin you trying to mine?

[@anthonyverhaegen2297]

my nano3 won't even connect to my internet and yes i have 2.4G... No mining for me damn

[@bASICMiner]

to save the settings you have to put in the password.. I was having the same problem.. having the pools reset to default... put the password.

[@jasonkidwell1767]

I seen some pools the minimum difficulty is 10k so that means the nano 3 would never find a share correct if your nano can only do 9614

[@BlueBearCrypto]

@@jasonkidwell1767 yep, this seems to be the case for the 2miners pool

[@TheFutureisTheFuture]

anyway to connect to the web interface when you are not on your home network?

[@doomnotron]

So the difficulty is 4th so i do 4000 * 2.3 =9,200 = d ?

[@josepmartinez9026]

Mmmmmmmm. Interesting what you say about the difficulty. I have a question. If the pool needs a password, do I put it below? Thank you very much for your time.

[@BlueBearCrypto]

Most pools don't require a password, they just tell you to put "x" so something is in that section. Not sure how you would input a a password as well but I'm sure there's a way to put both in and break up the password and command

[@josepmartinez9026]

@@BlueBearCrypto I have tested the difficulty parameters that you show in the video and it works perfectly. I have learned more from 2 videos of yours than all the ones I have seen in 3 months. Eternally grateful.

[@BlueBearCrypto]

@@josepmartinez9026 glad it's worked out for you! I'm just as happy with mine too lol

[@PaulLittlefield]

Where was that link to the calculator page for the d number please?

[@BlueBearCrypto]

@@PaulLittlefield sorry I've just added it to the description now

[@jstyl3z]

First time I have seen this. Nice find....But do the hashrate setting only work on specific pools I wonder? I mean the pools would have to be setup specifically to understand the d=xyx syntax right? On a side note, wonder if this works for other miners like old KS0s on Kaspa.

[@BlueBearCrypto]

I'm fairly certain it would work on all pools. But it would definitely need testing. You can do this with kaspa as well as I found sources talking about setting static difficulties on Kaspa miners too!

[@Andynrw-gx2pz]

Thanks for your interesting videos ☺️ subscribed right away. Do you have any links for us where the miner is not so expensive? I can only find fakeshops or insane prices of 250$ the miner actually costs 99$?

[@BlueBearCrypto]

@@Andynrw-gx2pz I got mine from their official Indiegogo Canaan page www.indiegogo.com/projects/avalon-nano-3-blockchain-smart-home#/ Think you can buy from their actual website now too at shop.canaan.io/products/avalon-nano-3?VariantsId=10282

[@propeldragon]

100 for the unit and you need a psu. Shipping is also $40

[@SKYRIPPEL-SKPlSandra]

Can mr please give the value for the luckyminer v7 with 1TH d=xxx? Thank you!

[@BlueBearCrypto]

That would be d=2300

[@SKYRIPPEL-SKPlSandra]

@@BlueBearCrypto thank you

[@SKYRIPPEL-SKPlSandra]

I now have the Avalon, is that correct to use the D=6900 instead of 4090? Medium 3 TH?

[@BlueBearCrypto]

@@SKYRIPPEL-SKPlSandra that's correct

[@redskin6146]

How much does running one of these cost per day in the UK (for electricity)? Thanks.

[@electricbloke]

Around 75p every 24hrs at a 23p per kwh rate, but that's on high power (4TH) around 135w. There is also some medium an low mode, the low mode runs at around 60 watts for around 2TH, so you can more than half the 75p, maybe 35p ish per 24hrs on low. Your electric may be more or less than the 23p per kwh I calculated it with, but you can get a good idea of a rough price.

[@redskin6146]

@@electricbloke Appreciate the reply. I've kept mine in the box, but at 75p a day, that's not going to break the bank as I had feared.

[@Crypto_Junkyard_Miner]

I'll stick with that old reliable S9 then nano3

[@BlueBearCrypto]

Surprisingly a similar price for a used one right now!

[@Crypto_Junkyard_Miner]

@@BlueBearCrypto I paid $60 on eBay for both of mine. With a PSU and brainns OS. No issues and running strong.

[@BlueBearCrypto]

@@Crypto_Junkyard_Miner tempting 😏

[@jeffnieb9840]

Try mining-Dutch pool and set it up with multiport on sha-256 you can mine solo or pool mine on that and you’ll mine all multiport sha-256 coins you just gotta pick pps or solo

[@hauxx1245]

My miner does this command 4096 even without entering it there. You can find out in the system log. PS: you can also enter the command after the password. x d=4096 also works, you haven't changed anything with it (Useless Video ...)

[@jasonkidwell1767]

How has the nano been running on lucky monster pool?

[@BlueBearCrypto]

@@jasonkidwell1767 perfectly. No issues since!

[@jasonkidwell1767]

@@BlueBearCrypto nice that's awesome,good to hear hopefully your problems are gone I got mine on lucky monster as well with a couple bitaxes the only thing I'm confused about is do the miners chain link to the wallet or do they all mine individually but just report to my wallet as one cuz I can see all my minors on the pool it just doesn't show individual hashrate is just a total

[@electricbloke]

What did I say that got my comment deleted? Was it the app I mentioned?

[@BlueBearCrypto]

I don't remember deleting any comments. What was your comment?

[@electricbloke]

​@@BlueBearCrypto It was about the Minerbox app, I use it to monitor solopool.

[@electricbloke]

I also explained to the other guy how to get up and running with his Nanos, and that post also disappeared after around 2 minutes 🤷🏻‍♂️

[@electricbloke]

It just happened again, I don't understand why I can't post about the app without my post going AWOL?

[@BlueBearCrypto]

@@electricbloke I'm not sure mate! I'm definitely not deleting any. I can see your previous posts are helpful!

[@jasonkidwell1767]

So d=9614 right?

[@BlueBearCrypto]

For me yes, what's your hashrate on the nano display?

[@jasonkidwell1767]

@@BlueBearCrypto it flickers between 4.05 and 4.1 on high on medium it's max is 3.35

[@BlueBearCrypto]

@@jasonkidwell1767 I'd recommend d=9315 for high mode and d=7705 for medium

[@jasonkidwell1767]

@@BlueBearCrypto no what exactly is that gonna do will it help find blocks easier?

[@BlueBearCrypto]

@@jasonkidwell1767 it will give your miner the correct difficulty for each share it tries to solve meaning you don't get the big dropouts you may experience when you check the pool. The pool does try to work out roughly what difficulty your miner should be running at so it isn't needed if your pool hashrate is stable