Power Tools Repairathon. Repairing bunch of faulty machines for customers.

Another Powertool repairathon video. This one is a few tools fixed this week for customers.
Not a job lot, each tool here belongs to different individuals.
#tools #repair #fix #howto #powertool #deandohertygreaser #powertools #diy #toolrestoration #toolrepair #toolfix

[@Justicesdad]

I feel like I have a better handle on my power tools because dean explaining how they work from the ground up is the means to understanding

[@LordInter]

and they are much more simple then I thought, which thinking about it is obvious 😂

[@HenryGoedeman-h5z]

Legalwise 😮😮qw​@@LordInter

[@Failsafeman100]

One of the most useful channels on KZbin

[@0rtmasta]

Just wonderful. Dean, you're like the uncle I wished I had in the tool shop. Patiently explaining and showing. Keep up the work, theres always something new to see and learn with your videos.

[@plunder1956]

It's very interesting to see and hear how you assess the cost of a repair in relation to the customer benefit for that tool. What you deliver is always a cost effective solution for each case - I suspect that is a rare quality in Toll servicing today.

[@zaxmaxlax]

The longer videos are always a bliss to watch

[@danellabarnes-penman1118]

Dean is the Master! So enjoy watching your content!

[@AnthonySmith-hr2kp]

Thanks on this one Dean, My pass load got dropped 4 years ago. With this video, I may have a go at it. Illinois,USA

[@ilfordjedi]

Dean's video's are one of the main reasons I like 'working from home'.

[@Dazob66]

The jigsaw fix was quite impressive looked a complicated strip and rebuild......👍🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@iandennis7836]

Cheers Dean, watched this and had a go at the variable speed trigger on my 35 year old B&D hammer drill. It's working again, yay!!! Thanks.

[@deandohertygreaser]

Fantastic!

[@Buckdeplorable]

Your memory is amazing. Outstanding Work.

[@chucknorris2952]

This. How he remeber where every part goes, every screw. I would be lost 😅

[@artman1968]

Such a pleasure watching your work, attention to detail and the honesty you present ❤

[@deandohertygreaser]

Thank you so much!

[@jasonbuckler190]

Excellent work and very educational. Thanks for the longer video.

[@samuelbartle7136]

fantastic videos mate and you are a machine in your knowledge for all the types of tools from all the different manufacturers literally blows my mind you have an amazing technical brain ❤ top man cant stop watching your stuff 💪👍

[@deandohertygreaser]

Thanks 👍

[@prasadvn524]

It was a feast.Learnt so many new things

[@paulmcgeoch2603]

Love the long videos. All the best Dean.

[@oddbodhobbies2840]

loved the jammed full jigsaw, it was jaw dropping good 👍👍

[@BigDawwwg101]

Huge fan of this guy and his videos. Our very own AvE

[@miikechloeliegh88880]

Thanks!

[@deandohertygreaser]

No problem!

[@patrickobrien5367]

Great video 📹 👍 thanks again for your help with this video all the way from the Philippines 🇵🇭 still living the dream 😊❤

[@georgepauselli769]

Learned a lot and enjoyed watching 👍👍

[@michaelwheeler4519]

Another fantastic long video, love the long ones keep up the great work Dean…

[@woodywoodpecker4039]

You sir are a wealth of knowledge.

[@Mechanicmckie]

You are spoiling us Deano

[@Molavi.abzar.tamerat]

You are great. I learned a lot from you. Thank you🙏🙏🙏

[@dannyhogi4953]

You make it look so easy

[@leonardpaciora5039]

Your the best!!!! Thanks Dean!!!!!!!

[@LoneStar1955]

Nice job Dean as always. 😊Greetings from Texas

[@ZerpsT]

Never thought I'd see an archeological dig on this channel

[@boberson83]

I'm genuinely amazed by the amount of sawdust in that saw, didn't expect that.

[@whitacrebespoke]

Remember servicing my 2003 im350 for first time and it smoking as it burnt the oil off. It did worry me I’d done something wrong. I got good at it and ended up doing loads of them for others

[@martinfreer3425]

Brilliant love your long video's keep up the fantastic work 👏 👍

[@jasonvandervalk3679]

I always look forward to seeing his videos

[@ffrwright]

Thank you for the video. Great inspiration for me.

[@ElMariachi1337]

90% of those types of Makita saws when there is no light after engaging the switch it's that controler. As for the broken bits, a bit of WD40 in the anvil and a couple of good hits with the head on my workbench works most of the time to get it moving to a point where some dentist tools can push it all the way out. Never tried the compressed air, will give it a go next time I get broken bit in one of those DTDs Thanks for the video again, always nice to learn some Dewalt tricks!

[@Patmc4377]

Great video 😊

[@sergeyyakimov9350]

Продолжай приятель. Ты для нас как гуру. Все по настоящему!!!!! Привет из России. Здесь тебя ценят!!!!!!!

[@dodgyjpt]

Great content looking forward to the next video drop

[@billgeorge7804]

It really bugs me when people don’t care for their power tools but then, if they did, we wouldn’t get to watch Dean doing his expert repairs.

[@michaelfairchild]

Tools fixed in this video and News about Milwaukee from USA: 0:22 Makita DCS552 Metal cutting saw | Fault: Not starting 8:15 (Dean's favourite brand) Milwaukee M18 BLPD2 Drill | Fault: TLDR according to owner "Sometimes working, sometimes not" 10:24 Hitachi G12SR3 Grinder | Fault: Jumps in powers/Too loose spindle 16:34 Makita DJV180 Jigsaw | Fault: Not running/Jammed 36:56 Makita DTD153 Impact Drill | Fault: Broken bit stuck in the chuck 43:51 (yet again, Dean's favourite brand) Milwaukee FNCS18GS Staple Gun | Fault: Fires every second time/Its a Milwaukee 59:03 Bosch GBH8-45D Hammer | Fault: Worn-out tool holder 1:12:24 DeWalt DCD999 Drill | Fault: Stuck trigger 1:23:53 Blue Ryobi EID-100-2RE SDS Drill (Took me quite the time to get the model) | Fault: Broken bit inside the chuck/Chuck not spinning 1:27:31 Paslode IM350/90CT Nailer | Fault: Broken screw (Bonus strip down, clean and rebuild) From USA news about Milwaukee: First is that there might be a lawsuit that Milwaukee used force labor prisoners in China to make their gloves. Other is that Milwaukee USA do not allow people to repair the tools, that included every repair shop that isnt working with them. Adding to that, opening the tool void the warranty too. That was stated to a guy who owned a repair shop, asked Milwaukee for blueprints to fix a broken item and they told him no and that opening the tool will void the warranty. For full video watch dude called "Rhine-labs" .

[@AndrejaKostic]

Sounds like someone at Milwaukee needs to read the Magnuson-Moss Warranty Act.

[@Justicesdad]

Pin this dean

[@bwzuell]

Great job.

[@linomoschin9521]

grazie molto dei tuoi video👍👍

[@jewellhirsch1694]

Hi Dean I was going. To tell you how much I have learn. About drills@ and saws I guest you are in London I live in Tallahassee Fl. My name is Fred from

[@nfi2nfi2]

That Milwaukee, I’ve found the Hall effect sensors can get gunked up with metal debris over time and just need a clean as the controller has a hard time determining position of the motor. I’ve cleaned a few and they kick back to life same issue.

[@shifty277]

Great long video! I love these marathons, especially when they feature tools i've not even handled before! Dean do you see a time where the battery nailers can get close to the gas nailers in terms of weight - not size, as I know that's too difficult due to the components needed, but just weight. Is it within the realms of 1 or more generation of tools from the Hikokis, Milwaukees, Dewalts (not flywheel) and of course Makita;s Battery nailer is due out Q4 of this year. I think they waited for Sencos patents to expire to not have to pay royalties - is that accurate? Thanks for the effort you take to explain your process and findings, a lot of other tool repair/restoration channels stay completely silent for the videos. Thumbs up.

[@AliGreer-p8z]

its education , watching this stuff is better than watching a film..............

[@jbusa6630]

You assemble that passload like there's a drill instructor timing you.

[@Steve765]

Would you look at all the compacted sawdust in that jigsaw, I'd never thought that could happen.

[@deandohertygreaser]

common for this model of makita

[@Johadart]

Just came across your channel and alls I can say is wow, your work is amazing not only to watch, but get hints and advice along the way, sub’d and liked, will be watching more of your content, keep up the great work 🤙🏼🇦🇺 Question: What are the long bits you use called or who sells them ? Joe from Australia 🤙🏼🇦🇺

[@deandohertygreaser]

Welcome aboard! they are wiha system 6 bits

[@Johadart]

@@deandohertygreaser Thankyou

[@UnCoolDad]

I think an ultrasonic cleaner would free you of some of the cleaning drudgery.

[@DavidHart-s6y]

Brillian👍👍

[@samanthawillis-w8k]

nitrogen is used as its not effected by outside temps and keeps a constant pressure wotever air temp is

[@Mee10792]

Your statutory rights are that the item should last a reasonable amount of time. That can be anywhere upto 6 years. The 1 year and 3 year guarantee manufacturers and retailers state means toffee. Obviously there's a difference between, say a £100 nail gun and a £800 nail gun. A letter accompanying the item from Trading Standards would soon get the item repaired. I never bother with the 3 year Makita warranty idea, I just use my statutory rights. I always recommend retailers to keep in touch with their local trading standards office to make sure they always have the latest guide on statutory rights.

[@ValgniTehki]

I actually enjoy watching the washing up process 😂 Great video as always, Dean. What brand of circlip pliers was the you were using?

[@jasonkentish]

With regassing Milwaukee guns have you ever thought of using a diving air bottle and the adaptor for filling PCP airguns or the dedicated PCP compressor. Diving air is moisture free and a charged bottle should last a good few refills.

[@osianmeilyr89]

I tried to do the same fix to my Makita impact last week. The retainer clip pinged off into the distance!

[@rvrt1829]

Hi Dean, love your video's and your in depth knowledge you share. What type of grease to you use in your syringe? Greetings fro NZ by the way. Thanks

[@pirox2720]

The original color here in the states was brown, my dad (45 yrs in construction) had a framing nailer that was a brick that gun probably weighed in at 15 lbs..

[@sergaljesus]

I wonder what that makita jigsaw sounded like before it completely locked up lol

[@jzrgrmm]

Bro disassembles stuff like Forrest Gump in the rifle assembly scene.

[@SamElesmore]

Man the way you strip things down gives me anxiety 😂 screws all over the place

[@sambrose1]

I really wish Makita would make one of those little metal cutting saws with the blade on the left. I use my wood saw all the time to cut metal and it works ok but the blade spins too fast and the chips go everywhere.

[@steveo4031]

That Makita jig saw was packed full of sawdust.

[@claudecharland5091]

the tools you fix are they given back to the owner or sold on the market

[@nathanguerin546]

New nail board needed 😂

[@emmetmyers]

I wonder about the feasibility of cutting that air chamber in half on that Milwaukee and installing a spring. Really curious why they don't use a spring.

[@deandohertygreaser]

Weight for one. It would be to heavy to hold. Not only the spring weight but also the housing would need bulked up a lot to contain that size a spring.

[@rcdogmanduh4440]

From the State's that's not a wee bit of sawdust, thats ship load!

[@se7enity648]

What’s inside the controller?

[@michaelhodge9902]

I want to see a teardown video about the Bosch cordless nail gun.

[@luthmhor]

That Milwaukee controller isn’t even potted, what a joke.

[@efektmurowany]

Milwaukeee😂😂😂❤❤❤❤❤❤🎉🎉🎉🎉

[@Kenny-8327]

The air you put in will have some water vapor in it yes which technically could cause corrosion would be my only argument but the amount your putting in I see a very slim chance of doing damage

[@adrian.adrianl6401]

The brown orings would normally just be Viton not NBR as the black ones .

[@711Bar]

1ч 46 минут счастья😇😇😇

[@Florin_Neagu]

Wouldn't it have been easier to drill into the center of the sheared bit and to put a screw in it so you can pull it out?

[@tazmeadows2925]

Your local air con use nitrogen to test ac

[@gregj7916]

I was trying to figure out the vat rate over there… north of 20%?

[@Auriflamme]

Doesn't Guinness use compressed nitrogen? Your local might have bottles of the stuff. Just a thought.

[@nfi2nfi2]

😂 use Argon if you want big molecules

[@tazmeadows2925]

1/8 to 1/4 npt

[@LordInter]

now wheres that power screw driver thats switch is intermitent

[@jewellhirsch1694]

Hey Mr. Dean, I think you should go for it and fix that drill. It’s really old but yet it’s in good shape and the guy probably had it for a long time. I know you could make him a deal and fix it. Why don’t you think it over and Decide differently I hope my name is Fred H I am from Tallahassee Florida and I watch every tape you put out I like I like your work and I like you thank you very much

[@dougburton1999]

Hey Dean. The Makita saw looked like the wires were pinched about 4” from the brush holder????

[@stanimir4197]

he tested the brush holders for continuity

[@dougburton1999]

I guess you never delt with pinch wires before. When thier pinched and you move them they connect and disconnect. Try it sometime before commenting….

[@stanimir4197]

@@dougburton1999 that's kind - the continuity sound was very solid. I don't have the same meter, though - still 'solid'. Given the LED was not on either, it's very unlikely it was just the power wire leading to the brush holders, anyways.

[@Mobin92]

Wouldn't it be an option to use 3rd party spares on old tools? E.g. those 20$ Hitachi brushes are infuriating! They costs CENTS to make, and are also available for under 1$.

[@miko007]

wouldnt it be feasable for those "cheap n cheerful" machines to just use cheap after market brushes and bearings?

[@gsroofs]

I know where to send my paslo )

[@patrickmcdonagh381]

The original paslode were black in colour

[@sauceless6666]

i'm starting to realize that miliwake as much as they can be quality aren't worth it if you want a tool you can repair yourself

[@deandohertygreaser]

They are not quality at all. They are actually one of the lowest quality brands on the market. Repair men simply call them red ryobi, because that's all they basically are. Good for mechanics, but that's it.

[@jbusa6630]

That gas stapler seems like a horrible design. It runs off that little tank and can't easily be refilled, needs to be stripped. Milwaukee is really trying to force people to buy new tools instead of fixing them. That's eventually gonna make their customers switch brands

[@GRamerDim]

very early video in the day 😅

[@michaelfairchild]

I would suspect he just edited it and left it to upload overnight.

[@GRamerDim]

​@michaelfairchild yeah that's what he did, just saying though it was very early

[@jzrgrmm]

Is everything in Europe is overpriced? Those parts in my poor devalued money country cost way less.

[@ommazen-ck4hx]

ز😮