Debunking Jewelry Myths: Goldsmithing a Manly Craft, Fake Gems, Exploding Torch?!

  Рет қаралды 4,613

The Art of Metalsmithing

The Art of Metalsmithing

Күн бұрын

Пікірлер: 44
@silvertinesjewelry
@silvertinesjewelry 9 ай бұрын
100% guilty with the mask issue of “this will be quick I don’t need a mask”. I am putting forth more effort to not be so lazy and wear a mask more even on quick tasks. I am not perfect at it yet but I am trying to build the habit. So happy to see you back on KZbin! I miss your videos and watched every single one in the last six months 😂 it was like a nightly routine to watch a couple of your videos
@SageRichardson
@SageRichardson 9 ай бұрын
I would love it if you did a video going over all the safety measures used throughout your work. I'm looking to expand on the techniques i use (and convert my spare room to a workspace), but i want to be careful and i've found that these points are often overlooked or are lacking the amount of detail i need to fully understand them.
@abbywebster8343
@abbywebster8343 9 ай бұрын
Thanks for another great video, so sorry you have had sad things happening, congratulations on your course launch!
@rowepjr
@rowepjr 9 ай бұрын
Thanks for the informative video. I am a a beginner and silversmithing is slowly getter better. I bought a couple of lab created rubbles and sapphires for while I am learning. I was impressed with how good they look. Have to be careful who you buy from or you could wind up with glass etc. I come from a technical background so am big on safety so make sure I use mask and eye protection.
@wellhello6
@wellhello6 9 ай бұрын
Very good advice all around.I have been following you for over a few years now and have learned alot from you ...thank you.
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 9 ай бұрын
That's great to hear! Thank you so much 🥰
@emmawales5913
@emmawales5913 9 ай бұрын
Thank you for this video! I was aware of everything in it, YET thank you soooo much for the reminder about the mask! I'm so often like "this will be very very quick, let's avoid the mask", and I shouldn't! I already had a few headaches after doing such thing, and obviously had particles in my nose too. Luckily, I've only be making jewelry for 2 years and not full time (and actually wearing my mask from time to time ehe), so I think it didn't have major effects on my health. But from now on, trust me, I will wear it EVERY TIME, even for small jobs! You kinda scared me aha, let's protect our healths! (I hoped that my headaches were not linked to my silversmith activities, but you confirmed that they probably were... if it starts like this, I don't want to know how it could end if I keep on not wearing mask everytime). Sometimes you know, but you're lazy, and it may have very bad results. So thank you, thank you again. Reminder to myself and to however wanting it: never think you already know, and just watch Basia's videos. You might learn something, or you might realized something, or you might remember something. Always watch and listen. Have a good day!
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 9 ай бұрын
That's very kind, thank you so much for your thoughtful comment and kind words! Gosh, totally, wearing a mask needs to be non negotiable and protecting our health always has to come first 👍
@MeerkatHandmadeJewelry-yw8ud
@MeerkatHandmadeJewelry-yw8ud 9 ай бұрын
Very interesting facts. Thanks Basia, great video as always❤
@gisella1350
@gisella1350 6 ай бұрын
You are on fire, love your enthusiasm. I will be a follower. Go Girls.
@Paullebbon
@Paullebbon 9 ай бұрын
Great video as always and I am happy to see you back again.
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 9 ай бұрын
So good to be back! I'm excited to make new content and videos 😀 thank you for tuning in today!
@skymmm31
@skymmm31 9 ай бұрын
Excellent!! I hope ur online course goes well! Good topic on misconceptions, real art is hard work, but fun work! ...we as artists are adding value that CNC jewelry making can't add, nor can Artificial intell ever replace us; the true Artisians who craft paintings, drawings, photographs, and beautiful jewelry, for resale. Prices are negotiable always! However, a thought of mine is sometimes folks want something of value for nothing! I occasionally donate my paintings to worthy people and causes. Yet, at the same time I will not compromise on price, especially on one of a kind piece, for Art work always goes up in value upon the Artist death. Thanks! For ur reply! Stay Positive! Fm TX... Love your videos, always! Bjp, American fine art painter
@luannmarie9015
@luannmarie9015 9 ай бұрын
I love your content. Very informative. Do you have online courses?
@netcreativedesigns
@netcreativedesigns 9 ай бұрын
Love the thumbnail! It really drew me in!
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 8 ай бұрын
That's great to hear! Thank you so much 🥰❤️
@hummingbird828
@hummingbird828 8 ай бұрын
I am a firm believer that handmade, no matter what it is and in what profession, is always worth more then machine made stuff because behind every handmade item there is a person who poured their time, passion and love in to that item and that alone is worth much more then any machine could achieve. When it comes to arts and crafts I very often feel that handmade items have much more caracter where as machine made ones offen seem to lack caracter and even seem dull in a way I can’t seem to be able to explain. It’s just not the same.
@askoseppanen3779
@askoseppanen3779 9 ай бұрын
Good video👍🏻, I'm so impulsive I should tape the mask on my face😂.. find myself often spray painting, grinding metals, soldering silver and lead. I realy need to take this more seriously,thank you for sharing this video 😎
@milouschmidt
@milouschmidt 22 күн бұрын
Very interesting! Thank you Basia! Notably about the mask 😅❤❤❤
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 15 күн бұрын
You're very welcome! Oh yeah, the mask is super important. I've been grilling my smithy friends about it until they got themselves proper masks too haha
@Heidi-Beth
@Heidi-Beth 5 ай бұрын
Thank you! I learned a lot:)
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 5 ай бұрын
I'm happy it was helpful and I hope that my other videos will be useful too 🙏❤️ Thank you for watching!
@PBCreation96
@PBCreation96 9 ай бұрын
“That butane torch is dangerous!” Yeah…..dangerous to my wallet 😂 I’m glad my old one crapped out right when Christmas came around
@johnabbotts1706
@johnabbotts1706 9 ай бұрын
l agree totally with your comments about Handmade jewellery. l consider every piece l make to be Unique unlike the mass produced products sold in shops. The public have so many misconceptions that they believe to be true. You should write a book :). Thanks for another informative video and Congrats on your first online Tutorial. John
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 9 ай бұрын
Thank you so much for watching and for your comment, John! ❤️ I completely agree, handmade is unique and much more special, the value is much higher without a doubt
@elishabird3721
@elishabird3721 9 ай бұрын
Basia, I don’t know what to say… just this evening I thought my torch can explode really. Later days it had problems igniting a spark, but this evening it got worse, so I had 1 from 5 successful start. And then it’s tank began to heating very fast, so I literally burned my fingers. So I just sit very sad and watch it from a distance. It is absolutely new, I just bought it a week ago
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 9 ай бұрын
While it's true that a hand torch won't just randomly explode in your hand out of the blue, it is just a product, that sometimes can be faulty and can totally malfunction. In this case, be safe and take it back to the seller! What you're describing is definitely not normal, so I'd definitely consult with the seller. It would be best to not use this torch until you know what's going on, be safe! And good luck ❤️
@elishabird3721
@elishabird3721 9 ай бұрын
@@TheArtOfMetalsmithing Thank you, Basia, I bought today Dremel Versaflame) As about my “wrong” torch - I will try to give it back to seller
@annalevina1375
@annalevina1375 9 ай бұрын
Thank you for taking care)
@catherinemartina6469
@catherinemartina6469 7 ай бұрын
Here is a question...When you solder, do you use shaded soldering glasses the way welders use welding glasses
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 6 ай бұрын
I don't actually, but I tend to use protective glasses. But shaded ones aren't necessary when soldering, like they are in welding.
@tdelitha
@tdelitha 8 ай бұрын
This was awesome!
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 8 ай бұрын
I'm glad you enjoyed it 😊 Thank you!
@jeannettesalazar6442
@jeannettesalazar6442 9 ай бұрын
Thanks for this great video. 😊❤
@catherinemartina6469
@catherinemartina6469 7 ай бұрын
I'm on the same page as you 100%.
@64t120r
@64t120r 4 ай бұрын
Those small torches are going to explode. I've melted them and they still didn't explode. Acetylene, on the other hand, is a bit dangerous. So, use the proper safety measures and always use flashback arrestors.
@catherinemartina6469
@catherinemartina6469 7 ай бұрын
Honestly, I will always prefer hand made jewellery before I purchase a machine made jewellery. And Pretty much everyone in my family feels the same way...
@akgoldbear7669
@akgoldbear7669 9 ай бұрын
Wife : Honey before we got married , you used to give me gifts and expensive jewelry. Husband : Yes…so ? Wife : How come you don't do it anymore ? Husband : Have you ever seen a fisherman give worms to the fish after catching it? 🤪
@pirazyoko
@pirazyoko 9 ай бұрын
O jaaaaaa, a jakby taki Crème brûlée zrobić? 🤔🤔 chociaż w sumie chyba nigdy nie jadłam :D
@TheArtOfMetalsmithing
@TheArtOfMetalsmithing 9 ай бұрын
NIGDY NIE JADŁAŚ??? Pyszny jest! Trochę overhyped, ale nadal dość dobry haha 😆 Ale tak, do gotowania taki palniczek jest super 👍
@johnhowton6339
@johnhowton6339 6 ай бұрын
wonderful ++++++
@kravazuta5594
@kravazuta5594 8 ай бұрын
TIPS for running small jewelry business! How I started and grow. Q&A
24:59
The Art of Metalsmithing
Рет қаралды 9 М.
I tricked MrBeast into giving me his channel
00:58
Jesser
Рет қаралды 27 МЛН
The Singing Challenge #joker #Harriet Quinn
00:35
佐助与鸣人
Рет қаралды 8 МЛН
Disrespect or Respect 💔❤️
00:27
Thiago Productions
Рет қаралды 18 МЛН
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 275 #shorts
00:29
My TOP 25 tools for jewelry metalsmithing at home!
11:44
The Art of Metalsmithing
Рет қаралды 31 М.
JEWELLERY TUTORIAL | Make Silver Clay Necklaces with Flowers
7:14
Cognac Jewellery School
Рет қаралды 7 М.
SAWING BASICS! How to use jeweler's saw frame. Metalsmithing for beginners
12:59
The Art of Metalsmithing
Рет қаралды 8 М.
Repair Jewelry Making Tools Instead of Replacing Them
9:30
Huiyi Tan
Рет қаралды 1,3 М.
HOW MUCH to get started metalsmithing jewelry?? What TOOLS to get & where?
12:31
The Art of Metalsmithing
Рет қаралды 8 М.
400 carat rough opal transformed into a pair of stunning earrings
9:07
Black Opal Direct
Рет қаралды 67 М.
Ikea Trolleys, DIY Desk, Smith's Bench: Jeweler's Craft Space Transformation!
8:36
Cool Gadgets for Jewelry Biz & Makers! Organization hacks
14:38
The Art of Metalsmithing
Рет қаралды 6 М.
I tricked MrBeast into giving me his channel
00:58
Jesser
Рет қаралды 27 МЛН