DeepCool AK400 Installation in AMD AM4 socket and Performance | Review

[@farlonmuentes6004]

i bought this and it is super worth it. I came from stock cooling fan on my i5 11400 and I was playing a CPU intensive game which brings my temps to 70c-80c and sometimes pushes to 90c and I was skeptical at first on buying this because it might just knockout 3-5c I thought but holy hell, it does its job great. I put in cinebench immediately after i installed it and my temps won't even go above 50c on full load and the game i was playing can't even push it above that temp as well and I scored it for just $30 in my region

[@gadunboxing]

Truly, this is one of the best budget cpu cooler .

[@franciscoramirezgallego5098]

Got it yesterday as well (my previous one was the intel one), I was quite surprised to see it is sooo good.

[@PerfectEn3my]

3700x got almost the same temp on box cooler, the only advantage is an air flow direction. Both coolers look good though, but the box one has RGB

[@VashhStamped]

Im getting 42 on idle and 72 degrees at 100% usage on my ryzen 5 5500 cpu. Is that ok?

[@gadunboxing]

It's normal

[@RAHULRAJ-nd6vc]

hi bro. would installation be harder to do with the mobo already set inside the case or is it better to install fan first and then put it in the case?

[@gadunboxing]

Installation is quite simple so i hope it won't be any issue if mobo already in the case.... Mine was also in the case and i didn't face any difficulties. Fan should be installed last.... Because there is a screw which will be below the fan

[@RAHULRAJ-nd6vc]

@@gadunboxing thanks for replying bro. im bulding for the first time. wont we have to remove the mobo from the case to install the backplate?

[@gadunboxing]

@@RAHULRAJ-nd6vc if the backplate needs to be changed then you can change it without removing the mobo from the casing. If you remove the casing panel then you will find that there is a space for removing the backplate ...

[@drbroan]

@@RAHULRAJ-nd6vc im also building my first pc

[@exotischevis1051]

@@drbroan how is it going?

[@iczberkay47]

Can this cooler would be able to cool 5800X3D? I'm planning to upgrade my 1600AF.

[@gadunboxing]

Yeah it will be able to cool 5800x3d... But if your budget allows then recommend to use ak620

[@iczberkay47]

@@gadunboxing Thank you so much

[@dmist24]

is the pre-applied thermal paste okay already? i actually bought a deepcool z5 paste, as an extra but I wonder if the existing pre-applied paste is okay.

[@gadunboxing]

Pre-applied thermal paste is okay. Have been using it for 3 months. Not problem found

[@gomresthameur]

Thank you for this vidéo 👍👏👏

[@a4455.]

It's quite a well-sized cooler, I need it for my R5 3600 since it's been heating up to 85 degrees in a lot of triple A games with the stock cooler and reapplied thermal paste.

[@gadunboxing]

It will be able to bring the temperature way lower than the stock cooler

[@michaelfalabella6296]

@@gadunboxing what CPU are you using?

[@gadunboxing]

@@michaelfalabella6296 ryzen 5 3500

[@michaelfalabella6296]

@@gadunboxing think it would be the same temps on the 3600? Or probably about 5 degrees hotter

[@gadunboxing]

@@michaelfalabella6296 maybe same ....if you don't overclock .......

[@aavarickn9625]

hi are you doing PBO curve with this or just default bios?

[@gadunboxing]

Default settings.

[@aavarickn9625]

@@gadunboxing do i have to hold backplate before install ak400?

[@gadunboxing]

@@aavarickn9625 maybe it needed

[@najirabegum4074]

Will it support zebronics h61 lga 1155 motherboard Please tell me sir

[@Woesel-i9p]

Can this cooler handle the Ryzen 7 7700X?

[@gadunboxing]

Yes ... But you should use ak620 for better performance....

[@BadWeatherfreak]

Can I use it with a ryzen 5950x

[@gadunboxing]

Recommended to use more powerful cooler......

[@BadWeatherfreak]

@@gadunboxing like the 600 version of this cooper?

[@gadunboxing]

@@BadWeatherfreak yes ak600 can be good. Try to look out review of ak600 with Ryzen 5950X

[@bandaralluhaybi1549]

Not good for high temp cpu

[@josephrashed5884]

Hello po sir! Pasok po ba ito sa a320m mother board ko?

[@ayushtt3649]

Can it be use in b450m?

[@gadunboxing]

Yes... I installed it on the MSI B450M MORTAR MAX

[@ForzaGN]

Will it work on amd ryzen 5 5600

[@gadunboxing]

It will work but for getting better performance you should use deepcool ak620

[@prateeksingh5641]

this Used in processor i5 13600k

[@GerritJames]

please review Scythe Kotetsu Mark 3 as well

[@AlokRanjan-dc4rd]

Will it fit in antec ax20 cabinet?

[@gadunboxing]

Yes it should be

[@prateeksingh5641]

​@@gadunboxingwill it fit in antec p20c cabinet

[@yawsx7]

what is you CPU?

[@hackerjacker3390]

planning to buy this instead of aio

[@gadunboxing]

If you have a 65w CPU then it will work good.

[@hackerjacker3390]

@@gadunboxing its it good for r5 3600?

[@yusrilramadhan]

​@@hackerjacker3390dude... he's literally using a ryzen 5 3600, watch the rest of the video 😂

[@najirabegum4074]

It is RGB or ARGB or no RGB lights

[@gadunboxing]

Jrgb

[@sheikh3605]

what is the cpu model ??

[@gadunboxing]

Ryzen R5 3500

[@SheepOverClock]

It's a great cooler but the Kotetsu Mark 3 should be able to stand in the same category.

[@shaise]

it's 20$ more though, for 30$ more you could get AK620 so ... dunno how it's the same category

[@paoooooooooooooo]

Can I use this for a ryzen 7 5700g?

[@gadunboxing]

Yes...you can use

[@paoooooooooooooo]

@@gadunboxing Thanks

[@NFRYouTube]

Buy a 5600 non x,g g is Gimped

[@ozan6120]

am5 support ?

[@gadunboxing]

According to website it will support am5

[@bandaralluhaybi1549]

It is not good for high frequncy cpu , like 4500 hz , it will stuggle