IPHONE 6 Touch Ic Replacement

[@JessaJones]

I love that you don't answer the equipment and flux questions. It makes me feel better :) ~Jessa

[@VoiceSriLanka]

True. But he doesn't use Advance and expensive gadgets like you use.

[@JessaJones]

What, replacing touch ics? Yes, every good microsolderer does nothing but replace touch ics all day every day now for iPhone 6+ It is an epidemic.

[@ibjessa]

+Laptop Repair Shop water complicates everything. It could be connector or chestnut or touch ics

[@JessaJones]

Touch ics are on the screen in the 6s

[@johnfl21]

capacitors have positive and negative direction? Does it matter the way that capacitor look? what if i remove a capacitor and install in wrong direction?

[@andysingh039]

If the restore doesn't help, than its the IC chip. I found the problem after searching online. There are thousands of iPhone's 6 & 6+ with this issue. The root of the problem lies with the touch ic chips on the motherboard. These touch ic chips are located on the back of the board, u2401 (Cumulus) and U2402 (Meson). This can be caused by even with the slight flexing of the board during normal uses of such a large phone. This causes the solder balls to partially separate from the chip. That is why thousands of people are being affected and apple is well aware of it. The intermittent unresponsive gets worse with time as chip oxidizes. The permanent solution is to replace these chips. Apple keeps deleting any comments on the forum that give this information out. It has deleted this comment of mine and of other people. They are trying to hide the problem so there isn't a class action lawsuit. Try copy and paste it yourself on the link provided and see the result for yourself, they will delete your comment after a day or two for no apparent reason. discussions.apple.com/thread/7028290?start=720&tstart=0

[@OfficialMarkieB]

*_Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here._*

[@chino123224]

Andy Singh fuck apple i had the same problem took the phone to the authorized dealer now they say its the multi-touch and want to charge me 300 dollars sorry for my English

[@alekshernandez2]

Yeah, fuck apple. Just don't keep on buying their shit.

[@hamed27749]

اقسم بالله انت فناااااااااااان يرجى تحميل المزيد من الفديوهات كل يوم ...طلب لا اكثر

[@azza2507]

My friend, all I have to say is you have a skill.

[@pravinkansara965]

Hi this is fantastic i loved the way you fixed the problem, i have a problem i have iPhone 6 which is completely dead i have checked the battery its perfect any ideas

[@tsvetelinp]

damn, you are the iphone guru! respect!

[@marzbandehnugara3496]

Dude - Thank you for the video - you have some mad skills desoldering and resoldering a BGA like that! The issue seems to be driven primarily by design. How do you propose the unit is fixed to ensure the issue does not recur a few months later?

[@theestrada2879]

This guy never answer

[@crm9274]

Hi deepfix. I have a water damaged iphone that has the flashlight torch permanently stuck on. Could you recommend what I should go about replacing first?

[@Schenki89]

Just fixed my touch by just resoldering the IC :) Let´s see how long it will last :D Thanks for the tutorial!

[@Lucas-nn6mc]

Hi Christopher, does your iPhone 6 still work since your resoldering?

[@Schenki89]

Radiom 19/12/16 Hi. Sadly not. Only worked for a day.

[@Lucas-nn6mc]

Really sorry about that, thanks for your answer

[@Lucas-nn6mc]

Schenk Christopher I thought I had answered, sry for your phone man and thanks for your reply, I will pay Apple to fix it, Im pretty sure they will propose me to replace it by a refurb one at the end because it's not repairable and I hope not having the same disease...

[@TOPHATVAMP]

wow amazing work keep it up .. you really help out allot!

[@Gunzee]

I needed to do this a few months ago, I just got iron really hot. Covered the touch ic with foil, don't let it overhang & use Flux to adhere it. I touched it for 15 seconds just once. It's still going, if it messes up again I might follow this.

[@artman102]

Wow wow wow. Nicely done!

[@diiz5268]

You don't have to place back these little capacitors? Why? Will it work without it?

[@knightphox]

+1

[@TolerantSpirit]

DiiZ same question..!!!

[@waseembashir2289]

Yes no problem thease capacitors or not important

[@MsRx7]

Someone pls answer this question

[@okadajiiko8773]

becuse both of them are connected to ground. so even if didnt put it back, it will work nomally.

[@Faborites1]

Hi I love your work! Can you please tell me what liquid do you use to clean up the Ic on the video? And also what other liquid glue do u use to stick the new Ic with the gun heat? Where can I buy it? ( also what king of gun is it? ) thank you👍🏻😊

[@ALBaTa-xr7gb]

hi there!thanks for the video..what type of liquid flux you used?

[@berki681]

Great Job, thanks for uploading

[@ryrelessguy4911]

deep fix what heat gun is that you are using ?

[@faisal-rashid-apollo]

Salam. Im new in fixing electronics, love to watch your videos. I have got hold of an iPhone 6 which i guess have the same issue. Now im going to attempt to replace the touch IC which i have never done before. Would appreciate if you could give me some advice plz. 1. I went on ebay and found IC in various different color (black,silver and white). does these color really matter?if it does which one or brand do you recommend me to buy for my space grey iPhone 6? 2. The pest you used to stick the new IC, what is it called and which brand is better? Thank you so much in advance.

[@aliabdelamir3979]

Hello,What kind of solder do you use. I'm new to this. Do you use rosin core? Is it lead or less free sodder? What metal do you use

[@wimalarathnabowatta724]

Sir your great ... very talant full

[@976shark]

hello thank you for this awesome video I have one question though, I have iphone 6 plus with a broken motherboard and i want to buy a locked one from ebay and change the chips from my old one to the new one. my question is what chips i need to replace???? i really appreciate the help

[@LeonardoRodrigues-wp6xk]

Good Morning! What is the temperature you use in hot air blower? Thank you!

[@msjessieyang]

Hey, just subscribed for your chanel , it is amazing video, but seems i cant get the temperature right, always end up overheating CPU. can you let me know what temperature is your heat gun set for this work?

[@theestrada2879]

Hello, question what heatgun you use and how I buy the soldering?? Thank you

[@vincentmuindi78]

HI I HAVE DEEN EXPERIENCING THE SAME PROBLEM. THANKS FOR THE SOLUTION

[@JinInAU]

hi, I am just wondering why didnt you put the two capacitors back to the board after replacing the ic? why doesnt it matter? thanks.

[@antoniojimenez1522]

Good work, what temperature and flow level you used?

[@genmaxpain]

can you do a replacement home button(touch id) video that you can update the phone normally if you replace the home button(touch id) the phone becomes a brick(fully useless) if you try to update it if you can solve this apple issue then that would help out hundreds of thousands of people with the error 53(touch id replacement issue) love your videos

[@paulmendoza8130]

its very basic to you sir" nice job sir...

[@angelkid1972]

nice and very educational, do you have any video or photo that can help to deal with dim light problem in ipad 2 wifi motherboard

[@Vylkeer]

The "touch disease" is the reason why I'm upgrading my 6 Plus to an 8 Plus, even if I didn't want to do it right now. I've already repaired it for a hefty price, but after only two months it stopped working again. Apple screwed up badly on this. They never really acknowledged their mistake and were aware of the structural defects it had even before it launched. Also, they never offered a free repair either, they charged customers $149 for it. If the 8 Plus will give me any kind of headache with similar problems, I'm never choosing Apple again.

[@BilalKhan_-bj4bu]

How is your 8 plus holding up after these years?

[@Mr-Usa]

Vip dear super and fast 🙏

[@AlexMaureira]

Friend , in your video minute 1:30 you are using a tool , what is that ? And what it is used for ? Thank you for your answer

[@blaser80]

It's a soldering iron, he's using it to apply solder across the pads that connect to the chip place on top of it.

[@heatrongaming6127]

+DEEP FIX what are the tools and flux you used to to this? thanks

[@yektabaysan9346]

hey bro, can you tell me which equipment you use ? Thank you .. i want to buy it for me ... thank you

[@felipecaetano6628]

deep fix how do you know what IC is responsible for that fuction? do you have electrical esquematic or service manual? plz help me I want improve on the my work 😊

[@DEEPFIX]

I use to follow schematic and previous experience....

[@felipecaetano6628]

+DEEP FIX I'll look for esquematic again... but I don't find yet. I'm fan your work..waiting the next video ☺☺

[@Methnerjacob]

+DEEP FIX If you remove the memory modules and replace them can you remove an iCloud lock from a phone or would it not boot?

[@mazureq6751]

i have just one question, are you using only solder flux?

[@sergeimarkelov3444]

Hello! What is the temperature of the air flow to be set when replace the charge controller? Thank you!

[@mechyzee]

350 almost

[@Bruno2002r]

directly from Brazil DX thank for the support and assistance ... we would like to know the temperature is 350 degree used if the blower .... Thanks in advance

[@angelsmock]

Bruno do iphone 55 7191105165

[@pinglin2410]

what is that u put on the board before u remove the ic chip??? plz let me know ! i have the materials and im waiting to change it ! THANK YOU

[@Toxic_Muk]

Flux

[@pinglin2410]

thank you

[@greengolfkid]

Great Vid, Thank you

[@adayinowr]

What's a good flux for these things and good soldering wire?

[@johnfl21]

capacitors have positive and negative direction? Does it matter the way that capacitor look?

[@786jayali]

what temp do you use on the heat gun, for taking it out and for putting is back in? and also what temp was your solder iron for cleaning solder? thank you buddy

[@DEEPFIX]

I have told in my video you can lesson.its 400 c or 380c

[@786jayali]

+DEEP FIX Thank you buddy for reply

[@javids606]

what type of liquid flux you used when removing chips from logic board

[@v2cell992]

and the flow?

[@v2cell992]

And the leakage of air?

[@benjaminsawyer8418]

What is that liquid u used to pour around the components of the logic board ?

[@q8shield]

Where is your shop exactly in kuwait?

[@jkj0417]

I watched the work video well. What does it twist with tweezers in the middle of the work?

[@Morjesta]

what brand of hot air station are you using? thanks

[@BU3000F]

Excellent boss. Where I can find and How much is the ic?

[@ion.mardari]

So how that stuff is called that you put on the chip before using the heat gun, on minute 1:00. Thanks!

[@ExSiegfried]

organic flux

[@rezajavid1680]

what kind of SMD rework are you use please? thanks

[@976shark]

hello thank you for this video, but can you tell us where we can buy the IC ???

[@geheim3757]

What is with touch ID? If you change the IC for touch, the Touch ID with a New homebutton works, too? Or which IC I have to change that the Touch ID will works with a New Homebutton I buy for example at ebay? Thanks for help!!!!

[@i-celldeepfix8310]

I have one word for you superß

[@sum14uin]

can you please be particular abt the online store or site which has parts available

[@pavloivchenko2435]

You can buy this ic here. Free international delivery btw. ali.pub/s07jb

[@jorgepina8858]

hello! what temperature do you use for that? and the air flow?, maybe 370º and air flow 6?? thanks

[@Ricky.Ricardo]

I use 325C and 45out of 99 air power and it comes off after about 5-10 seconds, but it depends on your nozzle and heat machine, experiment!

[@MarioBro111999]

what temperature should my hot air gun be?

[@d7oo435]

" using with quick 857D 380c "

[@BryantAvant]

abdurahman alahmadi that's over 700 F. That would destroyed everything

[@gideonking2617]

Hi, I have an iPhone 7 with touch problem. Can you do a video of how it's fixed? I'll be grateful. Thanks

[@Monyneverdie]

I love your work, do u have solution for iphone 6 error 53, i checked the fingerprint and replaced the cable but still can't fix it

[@muhammedzubairsaeed5987]

very nice brother

[@freshsnake7222]

hi please tell me which hotair gun u use and which flux u use... please tell.......bhai...please

[@mjd9813]

what temp you used to remove the ic?? i melt down the whole board and the ic wont come out

[@aliabdelamir3979]

You have to use soddering paste

[@mjd9813]

i used jyd zj-18, and ct-61b,, everything melt before the ic come out. im using 371 degree. i used to remove nokia and blackberry ics so easy but this stupid iphone wont come out with me. i will be thankful if you helped me

[@MsRx7]

Mahmoud j. For iphone 380 degree

[@ShaunXXstafford]

I can change any chip the problem I have is working out which to change. good flux makes the job easy

[@GriimReaber]

hey can i ask where u from because the iphone was in arabic laung + i have a problem now with the IC they told me to replace it how much does it cost ?

[@paulzaim7900]

5$

[@kennedymensah1234]

Hi there where do you located? want to change my ic. Thx

[@ttkoh123]

Does the new IC came reballed? Please show reball video.

[@TheRiverShen]

What equipment will I need to do this please.

[@geshapinol9542]

what was that wax thing you melted in? where can i buy it?

[@khangahraman5891]

gesha pinol ebay, amazon

[@trevisscotter8776]

Can I use touch ic form working phone or only I need new one??

[@03znav]

im wondering.. in redmi4x is. it. the same.touch ic? because my redmi4x touch has a problem like that

[@santiagotorres2874]

friend what country are you? I have this same problem and I can not solution

[@fresh55n9ne]

I finally found the problem with my phone

[@roydisc8413]

salaam alykom,. what could be the sollution for iphone 6 black screen after changing the sceen module

[@MarwaBarraj]

Hello. What is that liquid thing you are using?

[@jamesjobe9255]

It's called solider paste you can find it on amazon for cheap any brand will get the job done. Hope this helps

[@edimarkinho]

Can be removed from another used or new board

[@MevMan]

Hi Deep fix. I would like you to repair my phone if possible. I have to same problem but dont know where to purchase the IC. Please let me know if you repair phones. Thank you

[@buzzinginmyear]

Why does Apple use two touch ic chips? Can you explain? Thanks

[@MTS_IT]

hi, to what temperature is the blower set?

[@bartovines2219]

Whats the liquid thing you used?

[@exe6831]

?Can you tell me from anywhere Buy these pieces ic touch+ic connector

[@pavloivchenko2435]

You can buy this ic here. Free international delivery btw. ali.pub/s07jb

[@ZulfiqarAli-sp5gs]

nice video

[@13swagger]

I replaced mi digitizer and LCD but some letters don't work and part of the screen. does this mean I need this part plz help? For mi iPhone six

[@DSports074U]

hii sir im facing with same issue whats the price for this kind of ic problemm and how can i ship my cellphone for u guys to repair

[@eslampath]

👍🏻👍🏻👍🏻

[@kingblockhead1867]

Do you not use a microscope for this?

[@valentinofavetta3523]

What us the product tuo apple after saldature? Soldant paste?

[@yasirbacha9538]

how to repair apple ipad air 2 its good working pad but we place to charge after charging didnot work so what is the solution how to repair it thankyou

[@sum14uin]

can u pls tell me where i can buy ic or spare parts of phone

[@DEEPFIX]

Online

[@DEEPFIX]

Online

[@pavloivchenko2435]

You can buy this ic here. Free international delivery btw. ali.pub/s07jb

[@devichettri4603]

Do u have idea to unlock icloud for iphone 6+

[@Waldz24]

2:21 what is that liquid sir?

[@jorgepina8858]

Hello! I change bouth ic of touch on iphone 6 and now the phone not turn on, i put a battery with charge, but nothing, after that I see the battery and it is 0 Volts, i already changed other chips and never had any problems, can you help me?

[@21345luiz]

What is the liquid you are useing??

[@mostafamohamed4997]

What is this liquid that you use

[@abangjanjiabangdelete2156]

Is that oil or gris

[@TheGhhggify]

where are u from ? < are u in ksa ?

[@lakshmichetty4130]

Hi bro I facing a same issue but I couldn’t attend the incoming call touch is not working but rest all is working, pls do sure what need to be done ..

[@ntuthuzelopakade2583]

Im in South Africa Where would I buy this IC?

[@sj2000ful]

nice vid

[@lesceneedwards1789]

Yoo what that liquid thing u used?

[@keraki3616]

what is that liquid you use?