This method is proven over many decades (probably as long as telescopic forks existed) and used by many motorcycle mechanics. Good video.
@Moonfleet418 жыл бұрын
+Ob Fuscated Thanks buddy, learned it when i was 16, so yeah.. decades...lol
@allrockzcarlo5 жыл бұрын
its just who did not know this method by the way i bought my first motorcyle last 2016 thanks for the tutorial
@Moonfleet4111 жыл бұрын
Thanks Anthony, coming from a paid mechanic that is praise indeed, appreciate you watching! Del
@INDYSOULPREPPER8 жыл бұрын
if any one that is following Delboy's helpful advice and doesn't have a piece of sheet metal for front tire, Use a folded trash bag, heavy duty leaf bag is best, and your tire will turn like butter, thanks again Delboy, keep the advice coming, Your a Gentlemen and a shade tree mechanic scholar.
@ZygmuntKletterstein8 жыл бұрын
Top tip, like it!
@Elmojomo3 жыл бұрын
Oh man, this nearly decade-old video has saved me from possible replacing a perfectly good fork! Thanks so much Del! :)
@Moonfleet413 жыл бұрын
Glad It could help mate! thanks for watching.
@sixdsix50288 жыл бұрын
Using the nut for an Allen key to loosen the axle is really clever.
@Moonfleet418 жыл бұрын
Simple ideas aye mate!
@locomojo04856 жыл бұрын
I bought a nut and bolt that was same. ran nut on all the way and the cut off the excess. Then no fidgeting trying to get the nut to be half and half
@thomasmarchese28085 жыл бұрын
Throw in a thick spacer with a smaller diameter or 2 in front of the nut it will prevent the nut from sinking all the way into the allen wrench slot
@minimuggin4 жыл бұрын
Only thing I had was the end of a tap, stuck in a chainsaw type wrench with a screwdriver in the holes to hold it.
@nadmenny4 жыл бұрын
If you jam some T.P. in there before the nut it'll keep the nut from falling in too...
@ddin0ranqe9 жыл бұрын
This just saved me $$$ ! I had no idea on how easy it is to re allign my forks . Had a fall due to oil spill on the road . Thanks mate ! All the way from Singapore !
@Moonfleet419 жыл бұрын
Hi mate, glad to hear the video helped, that's what it's all about... !
@MacBegbie7 жыл бұрын
Hi Del, thanks for this tutorial. I came back to this after I low-sided my bike on black ice just before Xmas. This video tutorial is what has got my bike back in the road. Thanks once again for another lesson that has got my bike back on the road & thanks for keeping me riding. Patreonage worthy every penny 👍🏻👍🏻👍🏻
@Moonfleet417 жыл бұрын
Thanks buddy, am glad it can help you, this is a simple little trick aye?? And not difficult to do, even a decent pot hole will through your fork alignment out... really glad you enjoy the videos and thanks so much for you constant support, we are what we are cos of you, our Patrons!
@Moonfleet4112 жыл бұрын
Thanks Robert, it's nice to know you're out there watching. It's videos like this that the Discovery team want the most so just paying the bills, mate (well not actually because they don't pay anything but fulfilling the obligation all the same!), take care and keep it real, Del (hi from Penny P too!)
@brucekuwik38966 жыл бұрын
This man know his stuff and again.. Thank you for posting I’ve learned a lot
@justingreen44502 жыл бұрын
Thank you so much for the video. It got my bike back on the road. Now my wind therapy can continue.
@Moonfleet412 жыл бұрын
Great news Justin, ride safe!
@Garryvision10 жыл бұрын
Perfect advice, will do in the morning :) Another handy tip - when using a nut as a large hex bit, screw it tightly onto a bolt. The nut never lines up perfectly with the bolt head and prevents you pushing the nut in with the socket. You can always pop a weld on it to make a useful tool for future use - also stops the nut coming undone if the thing you are loosening was done up strongman style - I can't be the only one to loosen and re-tighten everything I've had done by someone else!
@Moonfleet4110 жыл бұрын
Good luck with the job mate! Hope it all works out !
@andrewwallis328Ай бұрын
Cheers Delboy. Just dropped my v strom in a field camping in Germany. Test rode it and my forks are misaligned. Managed to twist the front wheel and handlebars back so it’s ok to ride home. At least I know how to do a proper job when I get back now. Great vids mate
@danieldrage82310 жыл бұрын
Thanks for taking the time to make these videos. This was a job that concerned me and I have left the job for about a year and then followed your instructions and fixed it in less than an hour. Thanks and keep up the great work.
@Mr.-Mando8 жыл бұрын
Awesome. Just got a new motorcycle that was out of alignment, followed your directions and now they're straight. Thanks again...
@delboydereuck60318 жыл бұрын
Good stuff buddy, glad we could help !
@euro11117 жыл бұрын
Thanks for making this video, been having issues with my fz6 not 'riding straight' since I got the bike, throwing my right hand corners and most importantly my braking completely off. I'd just about had it till someone mentioned the front forks, they looked straight by eye, but I thought I'd give it a go following your video.. feels like a brand new bike.. actually turns and brakes as it should, found joy in riding once again.
@Moonfleet417 жыл бұрын
Cheers buddy, glad it helped you, this is a good little maintenance tip to do once a year, today's rotten roads, pot holes, and bumping kerbs can throw your forks out dead easy!
@Moonfleet4111 жыл бұрын
hi mate, well done for getting it sorted out, they need a tweek every year or so, pot hols and bumps can knock them out of alignment with no trouble... ride safe. Del.
@minibikedude049 жыл бұрын
STUPID EASY. I did this on my 1981 Honda CM400C in 5 min. it was really jacked up so I had to kick the wheel to break it free, but after that, push push push push and boom... straight as an arrow. Thank you so much!
@Moonfleet419 жыл бұрын
I DONT CARE Glad it worked for you buddy, simple little trick, old as the hills aye?!
@phorce169 жыл бұрын
After being involved in an accident with my 04 hornet. Found my handlebars weren't inline when riding straight. With some help from my dad holding the rear grab rail, and me jumping up and down on the bike, got everything straight and back to normal. Have watched a lot of your videos and have been very helpful. Thanks delboys garage!
@Moonfleet419 жыл бұрын
Nice one mate, thats excellent news, we love to hear that the videos have been of use... good on you... and ride safe aye.. Del.
@rmtw137 жыл бұрын
Perfect! I was so worried my forks were bent. I followed here instructions and they're totally straight!
@marcostrange43319 жыл бұрын
WHENEVER I HAVE A JOB TO DO ON MY MOTORCYCLE,AND AM UNSURE,YOU ARE ALWAYS THE FIRST STOP,WELL EXPLAINED AND ALWAYS DOES THE JOB,MANY THANKS FOR THE TIME AND EFFORT YOU PUT INTO VIDEOS VERY MUCH APPRECIATED,KEEP UP THE GOOD WORK SIR AND RIDE SAFE
@Moonfleet4111 жыл бұрын
That's great news buddy,....and exactly why we load them... well done getting to it yourself.... Del.
@rockbay7911 жыл бұрын
Hey Del, since I purchased my 883 Iron, I've been very reserved to do anything but ride it. I emailed you about a video on installing a pigtail to the battery. Then, I thought to myself, "What would Del do?" I know, he would say, "Mate, time to get your hands dirty and go for it!" Today, I did just that, and installed my pigtail by myself! Your videos gave me the confidence to do my own work! For this, I thank you from the bottom of my heart! My offer still stands on a video. Thank you!
@TheMadHatter133011 жыл бұрын
This is pay per view stuff man !! Thank you so much for the relentless priceless information !! keep up the good work !
@rickmoore92468 ай бұрын
Thanks mate . Putting my ST1300 forks back on after an overhaul. I was thinking about lining the front wheel back up . Now I can. Thanks again !
@Moonfleet418 ай бұрын
No problem 👍
@jezzamarkham52858 жыл бұрын
For people with a wonky sense of level,straight and angles there is a trick you can use called "Boning" (no not that sort) It's a joiners method of checking parallel.You need two straight pieces of wood, metal bar or similar. With two people get one person to hold a straight edge across the lower end of the forks (the lower the better). Now take the second straight edge and place it at the top of the forks, Across the handlebars or some other place you can check it is not angled. Now stand on the pegs and lean forward and look out at both ends of both straight edges if they line up at the tips the forks are true. If the ends are looking a bit like a very flattened x in comparison to each other then the forks are out and the flattened x will show you which way they are out. If the left bottom tip of the straight edge is in front of the top left tip then your bars need to turn to the right while the wheel stays straight ahead. If it's the other way (bottom right tip is in front of top right tip and the other end the bottom tip is behind the top right tip) then the bars need to turn left while the wheel stays straight ahead. It sounds complicated but print this off and practice with your bike to find the best place to put the straight edges (through the front wheel spokes or above but the further apart the better) then you will get it fairly quickly. Ride Safe and keep it shiny side up.
@bizzmotovlogs68 жыл бұрын
+Jeremy Markham that's simple and good bro,thanks for sharing
@The74nebo7 жыл бұрын
Jeremy Markham awesome thanks for info
@SuperiorKnightZ7 жыл бұрын
This actually helped clear some paranoia doing it alone. Thx ^_^
@DTMiglin10 жыл бұрын
My bike was in a local shop for three weeks and they couldn't figure out (or didn't bother to) how to get my alignment right again. This did the trick. I wish I had consulted trusty old KZbin before going to a "professional" first. Thanks for the help!
@Moonfleet4110 жыл бұрын
Hi mate, glad you got it sorted out and the bike is now right for you. i have also found that many garages cant seem to get this simple adjustment right....like you say, maybe they just cant be bothered...lol
@CyberPsyLen8 жыл бұрын
excellent tutorial - thanks! You have real skill at teaching.
@Moonfleet418 жыл бұрын
+CyberPsyLen Thanks, glad you enjoy !
@Moonfleet4112 жыл бұрын
Hi CJ.. check them if they feel out...i have always been a fan of the old mantra "if the cart aint broke, dont fix it"..ride them next time and look down at the bars as you cruise in a flat straight line,, if they are a bit left or right, then do this adjustment....but if they are bang on, leave well along.. you can make work for yourself for no reason.... good going buddy... cheers, gel.
@davidmarberry55655 жыл бұрын
try taking two nuts and lock them together on a bolt now you have a axle tool! thanks good video
@MARE9519 жыл бұрын
Thanks so much for this "how to". I had a lay down the other day in the rain. Tire pointing straight, bars pointing right. With this information, I will be able to get it all back to normal. Thanks again.
@Moonfleet419 жыл бұрын
Thats great Michael, glad we could help, hope it goes ok... Del. P.S. hope you weren't hurt buddy..!
@Box545x398 жыл бұрын
It's like giving cpr to your bike, lovely method.
@Moonfleet418 жыл бұрын
+Earth Inc. Thanks buddy, simple but effective aye?!
@Box545x398 жыл бұрын
Moonfleet41 Indeed, sadly I found a bend in my fork, so i'll be replacing it, THEN I can use this trick lol.
@colinm13254 жыл бұрын
@@Box545x39 Hey bf, glad u found the bend in ur fork, and l hope u kept it... They/U can rebend them back to straight and hav a spare on the shelf. Ride safe.🛵🖖👍🌈🌏💜
@cescarb4 жыл бұрын
They are chest compressions, not CPR.
@jfv6511 жыл бұрын
Followed your instructions in this vid today on my Zephyr. And i also lowered the fork by pushing the tubes 12mm through the yokes. It worked surprisingly well. I also raised the back using the excenters in the swingarm. The bike steers *much* sharper now!
@okhan88058 жыл бұрын
How is possible to differentiate whether the forks have a bend or whether they are just twisted resulting in a mal-alignment?
@jeevanjena6665 жыл бұрын
Bend can be seen
@mclovin5838 жыл бұрын
This worked an absolute treat. I knew my forks weren't bent, just a bit twisted. I was trying to figure out how to mark and measure the fork legs, but I didn't need to because this cured them completely. Cheers.
@Moonfleet418 жыл бұрын
Nice one buddy, there are cleverly designed by the factory to self centre in the yokes, just need to loosen it all off and plunge them up and down a bit - they will soon find centre again ! Thanks for taking the time to let us know !
@wafflexcopter9310 жыл бұрын
did you loosen that big silver bolt in the center of the handlebars?
@Moonfleet4110 жыл бұрын
Sure did Oscar, just forgot to mention it in the video....its important to back it off so the two clamps can move independently of each other and re-align.
@elliotfricker46315 жыл бұрын
@@Moonfleet41 when do you re tighten this?
@LatinDanceVideos3 жыл бұрын
@@elliotfricker4631 at 11:31 he says to tighten from top down.
@echanos10 жыл бұрын
Wanted to say thanks a bunch for the the video! Did this with my old VFR 750 and it worked great. Really happy with the result.
@Moonfleet4110 жыл бұрын
Well done mate, glad it worked for you. take care..
@Boyracer29836 жыл бұрын
Hey Delboy, just want to say a big thank you, this video saved me so much money and hassle, I have a moped and honestly thought my frame was bent following a small crash (not my fault), I googled and this video came up. I tried what you said in the video and hell, the difference, my bike is back to perfect ride again. Thank you so so much. You are a lifesaver. Rich United kingdom.
@Moonfleet416 жыл бұрын
Hi Rich.. good to hear from you matey, and glad the video could help you out.. the forks are only gripped by the yokes using friction, so they can be easily knocked out of alignment.. even a bad pot hole or bumping up curbs can cause the, to be knocked out a bit... just do this any tome it happens again... and it'll usually be fine.. Hope you weren't hurt in the "small crash".. ride safe mate.. Del.
@ez75419 жыл бұрын
Laid my ladie'a cbr600rr down, forks were misaligned. I was one moment from taking over to my mechanic to get them fixed but decided to see what Google had to say on this. Uber happy that I found your video, worked out perfectly for me. Thank you and cheers from California!
@Moonfleet419 жыл бұрын
Thanks Ezzy...thats great news, and you saved the money at the garage...top class buddy... thanks for getting in touch.. ride safe, all the best.. Del.
@Moonfleet4111 жыл бұрын
You're most welcome Michael, it's a simple trick and I'm glad it worked for you mate...!
@ajaydalal49958 жыл бұрын
Hi Mate....thanks a lot for this tutorial....I was on the verge of selling my ride which had this problem since I tried everything but wasn't able to rectify the issue.....your vedio was god sent .....asked a friendly mechanic to help me out and voila it worked like magic ....thanks again friend you are doing a great job stay blessed
@Moonfleet418 жыл бұрын
+Ajay Dalal Thanks Ajay, glad it worked for you sir, and sometimes its juysr a simple fix that can make all the difference.. ride safe.. Del.
@Moonfleet4112 жыл бұрын
Ok mate, clever thinking, but I don't have a 24mm bolt and I will be welding the nut to a piece of bar as soon as I get to it, it's never 'tight' as the axle is held by the pinch bolts, but it will be yet another handy improvised tool for the box. Thanks for taking the time, it's a great suggestion, it always amazes me how much ingenuity we bikers have, take care & keep safe, Del
@E85-M54-Power10 жыл бұрын
Thanks for the vid, someone didn't clean up an oil spill in the middle of the road, so I ended up low siding my bike. My alignment is a bit off, but this video helped me understand how to set the forks back straight. Thanks.
@Moonfleet4110 жыл бұрын
Well done mate, goad it could help you, and hope you weren't hurt in the drop... good luck.. Del.
@E85-M54-Power10 жыл бұрын
Moonfleet41 I found out that my right fork was a bit higher after the drop, so I had to loosen up the top tree to set the height back to OEM specs. After that, I did the same process in this video,which is to pump on the bars and tank to help settle the bottom forks.It took a while, I had to hold the wheel and tweak the bar with my hands, and pump the front end down again.However,the job is done and it worked out well....many thanks.
@spyuggy7 жыл бұрын
Excellent tutorial on how to straighten up the front end, I used to struggle with this and I am going back to the 60s, I now have a Honda DN01 shaft drive, which makes axle stands a little more difficult, so it is statues for my wife. Thanks.
@Moonfleet417 жыл бұрын
Ha ha, "Statues", i like that...lol
@Moonfleet4111 жыл бұрын
Thank you kindly sir, its a pleasure to have such nice comments..take care, Del
@alexxxark4 жыл бұрын
I do a lot of services on my bikes and I can tell you got very good hands, how you show all little things that important, very good touch and feel when you hold a tool. You're videos give me a lot of tips how to improve and do stuff easier. Keep it up, and many thanks to you.
@Moonfleet414 жыл бұрын
I appreciate that Alex, thank you for your feedback mate!
@correobasura397 жыл бұрын
I took a hard spill off road on my Africa Twin yesterday, enough to bend the bars and twist a riser in its mount. Luckily, I was able to limp to a Honda deal 35 miles away where they put on a bar that'll work temporarily and the riser corrected itself on the installation. Driving home, though, I saw the bars still didn't seem square with the wheel (they should've checked that, I think). I came across your well-taught video today and did the process just as you describe. Problem solved. You have a great teaching style and nothing was left unsaid that needed said. Thanks for this.
@Moonfleet4111 жыл бұрын
Yes you do mate, as this allows the two clamps to move independently of each other as that is essential for re-aligning the forks... good luck with it, Del
@opengl12 жыл бұрын
THANK YOU! MY forks were misaligned after a parking lot spill, this had me perfectly back in alignment in less than 15 minutes.
@Moonfleet412 жыл бұрын
You're welcome, glad it helped you.
@DomeDweller11 жыл бұрын
Yes thanks. I am going to use your front caliper rebuild video to rebuild my front calipers. Woul have cost me 200 dollars to do it at the local repair shop. Thanks again.
@TheNobbynoonar9 жыл бұрын
Cheers Delboy! I was not looking forward to crawling around the bike after the front end was put out. It was parked up and managed to get hit by a fence panel blowing around in a storm!!! (knocked the bike over) Anyway, after watching yet another one of your excellent videos i took my time,followed your advice and now the front end is spot on. THANK YOU.
@Moonfleet419 жыл бұрын
sid snot Nice one Sid.. and what a cool story for the pub..."Got hit by a flying fence panel"..lol
@TheDarkGTAPlayer9 жыл бұрын
Thanks for the video! My yz250 took a nasty spill and I could never find any video that explained this so well! Thank you!!!
@Moonfleet4112 жыл бұрын
Cheers mate, just remember don't over-tighten anything, they're hard steel bolts into soft alloy threads, just nip them up hand-tight and 'dot' the heads with Tippex or nail varnish to keep an eye on them for a day or two afterwards, good luck with it, Del
@richardwallinger16839 жыл бұрын
Wow the most practical presentation ever . 70 year old ex Donnington GT champion in 1980.. You are the man . My Suzuki 650Burgman I have just bought steered like a dog .. weaving along happily. The steering head bearings were almost dry.and there was quite a lot of preload . (not noticeable through the handlebars .) Yet to test ride it .still awaiting the refurbished wheels .
@Moonfleet419 жыл бұрын
Hi Richard, how kind of you to make such generous comments Sir, and coming from a true veteran of the track too... you know how it is, these things aren't difficult, they just need laying out in basic terms without all the stuffy mechanic jargon... we all own bikes, we all like to keep them safe and working right, and we none of us have the money to pass them to the main dealer with their comedy hourly rates... not least for simple things like this anyway! Thank you most kindly for watching, and again, for your amazing comments, many thanks, ride safe, Del & Penny!
@fornile9 жыл бұрын
I really appreciate this video. I lowsided my CBR250R after my front tire took on a clump of mud at 10 mph in a slight corner and bent my handlebars out of alignment. This really helped. It took about an hour of me fiddling around before I got it aligned to my liking, but I later realize that I never loosened the top center bolt. I went back and loosened it and tightened it back up in case there was some tension that needed to be released after the adjustment had been done without loosening it. Thanks Del.
@Moonfleet419 жыл бұрын
Soviet Tiger Nice mate, glad you got it sorted... next time, now watch out for those mud clumps lol! RSMF
@EliteGroupInternational11 жыл бұрын
WOW . . . just WOW, ive been trying to sort mine out for bloody weeks, even took an angle grinder to my front tyre cause it was wearing unevenly!! I'll be following this video on friday afternoon!
@BeachBum88m7 жыл бұрын
I've just got a new set of forks due to an off I had last week and was puzzling about how to realign my forks and came across this video which did the trick quite nicely. Much appreciated, I've been a fair shadetree car mechanic the last ten years, but am new to bikes, and learning all the new tricks is rather fun!
@Moonfleet417 жыл бұрын
Nice one buddy, glad the video could help you - welcome to the darkside !
@lr9376 жыл бұрын
Best motorcycle maintenance channel in you tube👏👏👏thanks for making the maintenance so much easier when working on our bikes, greetings from Florida USA😎
@Moonfleet416 жыл бұрын
Thank you most kindly sir, we're glad you enjoy the videos, it's an honour to be able to inspire you.. take care.. D&Px
@agnzalez19 жыл бұрын
I want to thank you for making this video, I had changed the top clamp to lower the my hayabusa an inch and I hit a pothole and my alignment went out bad. After watching this video it's riding straight, thanks.
@Moonfleet419 жыл бұрын
agnzalez1 Nice one buddy, glsd it helped you out... ride safe aye.. Del.
@AdityaUpadhyaya7 жыл бұрын
I had doubts coming into this video. Then i saw it.... DUDE, YOU ARE FREAKING AMAZING! THANK YOU SO MUCH! You just solved a problem I had for a year!! I can't even thank you enough!! Amazing!
@Moonfleet417 жыл бұрын
Ha ha, you are most welcome Aditya, we love it when a video can help someone.... good luck with it.. Del.
@samuelgamble77093 ай бұрын
A decade on and Del is still helping me work on by bike!
@Moonfleet413 ай бұрын
Most welcome mate, thanks for the support.
@Moonfleet4111 жыл бұрын
You are most welcome mate, im glad it worked for you, that's what its there for... ride safe in the crap weather... cheers. Del.
@VintageMXStore11 жыл бұрын
Thanks for the reply Del - I've already swapped out the handlebar riser bolts - one was bent. I'm going to work on the re-alignment tomorrow. Cheers. Jon
@colinm13254 жыл бұрын
Hey Del, Thanks for the step by step, bought a bike that had been dropped. It got a head shake when u let the bars go, tried your/the realign method and it fixed it. Thanks for sharing and taking the time to so. Simple stuff, but, if u don't know, u don't know. Cheers. 🛵🖖👍🌈🌏💜
@Moonfleet414 жыл бұрын
Nice one mate, am glad it worked for you!
@Moonfleet4111 жыл бұрын
Cheers mate, good luck with it! Set the back alignment first by measuring off the swing arm pivot for absolute accuracy... then do this to the front, if it's still tracing after that you could have deeper troubles - good luck, Del
@Scotty_K8 жыл бұрын
Absolutely brilliant trick mate just done my crf 450 with it was about 10 degrees out now its straight as an arrow
@Moonfleet418 жыл бұрын
Great news Scotty, glad it could help you out - ride safe, Del
@zer0thegreat5 жыл бұрын
this was perfect, my bike hit a deer and the forks weren't aligned anymore, this was before I owned it though, I know the guy who hit the deer he was fine after, but the bike had minor damage and is now being repaired by me as it is mine, anyway thanks for this it saved a lot of time that I would have spent on trying to figure this out myself.
@tittyrino3 жыл бұрын
I’m going to do this tomorrow on my 85 Yamaha Vmax 1200. It is dark red metallic and looks brand new with 11,000 original miles however living in Pennsylvania I hit some potholes during road construction and I developed a bit of front end wobble so I am excited to do this.Thanks for the video and stay safe
@Moonfleet413 жыл бұрын
Good luck with it Jimbo, great bike and sounds like a beautiful example...
@Tadapocus9 жыл бұрын
Thanks, Moonfleet! Tumped my KLR 650 over on an East Texas log road and misaligned the forks. You've saved me a lot of money!
@Moonfleet419 жыл бұрын
Thanks Tad...glad you could use the video, no need to pay garages for this kind of basic stuff...and sounds like you use your KLR like you're meant to... top stuff sir.. ride safe aye... Del.
@TheMasterOfTheU9 жыл бұрын
I nailed a deer back in November, didn't really notice anything at first because the weather kept me in until now. This video really helped a lot! Took me about an hour or so and she rides as good as new. Thanks!!
@Moonfleet419 жыл бұрын
Good stuff Jerry, glad to hear it mate... and obviously glad you weren't hurt either.... ride safe buddy, all the best, Del
@iansians67033 жыл бұрын
Magic, thanks for that. Very informative. I rebuild a crashed Gen 1 in 2004. It had bent forks so I replaced them and never did the alignment thing. Never had a problem but wish I'd seen this video prior, would have been able to check it easily. My local mechanic berated me for tightening the forks up to much for the same reason's you say. Delboy's Hayabusa is a world of knowledge - love it.
@thejester75ful11 жыл бұрын
hit a big pot hole the other day and managed to up right the bike mid corner..but it knocked the forks out a fair bit!!..your vid Just brill... so easy to do.. I had no idea it was that easy to do. Sod the garage from now on.. thanks again & ride safe.
@GuzziHeroV508 жыл бұрын
Cheers for this! I just followed your method. Lowsided my R6 trackbike yesterday and I was told "Yeah you got a bent fork mate". I followed your tips and I'm as sure as anything it was just turned in the yokes!
@Moonfleet418 жыл бұрын
+GuzziHeroV50 Thats usually what it is mate, the fact that the yokes only hold with friction if designed to let the legs twist in thier holes and prevent damage.... USD forks dont bend unless you hit a wall hard..! Hope you've sorted it chap... all the best. Del.
@claudiumoldovan1871 Жыл бұрын
I just did this alignment on my gsxr😮 dude I finally feel the rear wheel and what is doing and actually feels like I got a new tire and even leaning in both side feels equal and more stable 😍
@Moonfleet41 Жыл бұрын
Glad it worked for you buddy.. ride safe aye.
@arbearusn2 жыл бұрын
This worked like a charm on my vstrom 1000 after I had a hard curb hit. It solved about 95% of the twist and I did the last 5% the old fashioned bicycle way. Dead straight now. Use what you got, center stand no paddock stand and patience. Thanks!
@Moonfleet412 жыл бұрын
Glad it worked for you mate, feels good to get it back to normal I bet!
@adrianmorris755510 жыл бұрын
Thanks for the reply, I didn't skip through it I just heard you say these bolts here as you were pointing to the yolks , I watched it again and yes you did mean the bottom yolk bolts . I wasn't trying to say you didn't make clear , cheers buddy.
@Moonfleet4110 жыл бұрын
Cheers mate, thought maybe i hadn't made it clear... its hard to cover everything in a video... hope it helps you fellah... all the best, Del.
@doczygergely49459 жыл бұрын
Thanks mate! I bought my 05 Hornet with missaligned forks. It took about half an hour to set it right after I watched your video!
@Moonfleet419 жыл бұрын
Dóczy Gergely Thanks Doczy, im glad it helped you my friend..
@dragracerwinky12 жыл бұрын
Ah yes, I did delete the other one because I composed it before watching the full video and when I went back and viewed it I realized you went a different direction than I anticipated. Thanks for putting out your videos ... they are great!
@johnDukemaster9 жыл бұрын
I must say, you really do teach me Things I already should know about! I've been riding bikes since -83 and I've never thought about fork alignment! Well, taking the fork apart for some Black paintjob and progressive springs will be finished off with some fork alignment, fur sure! Splendid! Thanks Del for sharing! ("Del" Means "share" or "part" in Scandinavia! Suitable name for you, indeed!)
@Moonfleet419 жыл бұрын
HI Jon, Thanks amazing, i had no idea of the 'share' meaning....how spooky is that?..lol Thanks for your kind comments my friend, im glad the videos can help you, its just basic stuff we can all benefit from.. take care, have a great Christmas and ride safe in the new year... Del.
@nikkidobbs98569 жыл бұрын
Delboy. You say in a way I understand. I trust that in a mechanic. Thank you.
@Moonfleet419 жыл бұрын
Cheers Andy, just say it like it is aye?....fancy terms are only to make people look important aye..lol
@EliteGroupInternational11 жыл бұрын
Just followed this procedure on my ZX6R Del and we're running perfectly straight and true, if i ever bump into you one day i'll make damn sure i buy you a pint mate, thanks a million! Jack
@JacksonAces10 жыл бұрын
Thanks for this! I had a bit of an off on my Honda VFR, noticed that the forks were twisted when I was bringing it home from the shop. Never thought the fix would be this easy!
@Moonfleet4110 жыл бұрын
Nice one Jackson, it truly is as easy as that mate! The fork legs are only gripped by the yokes with friction and actually allowing them to move this way in an impact prevents them getting bent... well done buddy, take care and ride safe, Del
@morianmed20029 жыл бұрын
Great job mate, thanks for sharing we need more videos like this simple with the knowledge in doing it , greeting from algeria ..
@Moonfleet419 жыл бұрын
H Mass....good to hear from you and from so far away....Thank you for your kind comments, im glad the videos can help you sir... all the best.. take care. Del.
@sporsterini9 жыл бұрын
I went out earlier this evening and tried your procedure on my 2006 Kawasaki Vulcan 900 cruiser bike. The machine had been in a crash with the previous owner. The wheel was cocked to the left making me steer to the right a bit. It worked perfectly. Thanks my friend for posting this.
@Moonfleet419 жыл бұрын
sporsterini You're most welcome buddy, im glad it worked for you... ride safe chap.. all the best... Del.
@shaneoneill19493 жыл бұрын
Great video, i was panicking when I noticed my wheel out of alignment and this is exactly the fix i was hoping for. I love watching your videos thanks a million
@Moonfleet413 жыл бұрын
Glad it helped
@SkidmoreRacing11 жыл бұрын
glad i found this video. i've only been riding for about 3 months so i was freaking out, thought i had really messed something up lol quick realignment and life is good
@harrykuntz8789 жыл бұрын
another well made helpful video thank you your trick with the fork seal driver made from exhaust clamps and waste water pipe works a treat . I bought my clamps in a tractor and farm machinery garage . I recently changed fork gaiters on a bike I will go back and make sure the forks are straight now . I will also check the headstock bearings for play and swing arm bearings
@Moonfleet419 жыл бұрын
Bob Marley Hi Bob, glad the videos could help you mate, good on you got getting stuck in.. Del;.
@Moonfleet4111 жыл бұрын
Hi mate, the re-alignment will be easily detected because your bars will sit twisted to one side as you ride along... so if they are straight it's not alignment - if you have a wobble over 70 it's more likely to be wheel balancing, maybe get them checked at your local tyre shop. But first have a look to see if a wheel weight has come off by seeing if there is a sticky patch where one is missing... hope that helps, good luck, Del
@Moonfleet4112 жыл бұрын
Hi Sam..ok, just looked at Penny's bike, At the back of the caliper there's a small pin that goes through both pads (the pin has a 'flat blade screw head' so fit a good quality screw driver in that pin head, back it right out and remove it, the pads will now slot out of the back of the caliper, if you back off the front bolt a bit it will give you some 'jiggle room' to help free them off, and if you lever the pistons back you'll be able to drop them out, let me know how you get on, Del.
@AlmightyMetalHead8 жыл бұрын
thanks once again for another great video i had a crash in january nothing bad, my first in 2 years of riding and it threw the alignment off this worked a treat 20 mins of CPR and perfect cheers :)
@Moonfleet418 жыл бұрын
+Robert De Cort Nice one mate, glad it worked for ya!
@michaelgorrell3040 Жыл бұрын
Thank u for making this video! Looks like it’s been ten years since u made it and it just helped me out drastically
@Moonfleet41 Жыл бұрын
Most welcome Michael, glad to help.
@poisonforlunch9 жыл бұрын
i appreciate you going through this trouble ( one hand camera,,,,one hand allen key )..thanks very helpful
@Moonfleet419 жыл бұрын
You're welcome buddy, glad it could help!
@troydiamond11 жыл бұрын
thx a bunch, will re-align my fork on sunday. i wouldn't even have noticed that it's off if it wasn't for your superb channel. keep it up mate, you are helping me (and obviously a whole lot of others, too) a lot. i will keep spreading the word about your channel.
@TheoLubbe9 жыл бұрын
Thanks to the step of loosening that axle bolt of yours I got the idea of using some paper towel as a spacer to make use of a 14mm nut to get the cap off my ickle Yamaha SR250's one fork. I was previously trying to use a bolt with a series of the nuts on the end hoping they'd clamp each other down, but I needed to apply so much torque to the damn thing I was making the two 'clamping' nuts turn along with the one I was applying the torque to. With this I could use my torque wrench with its nice and long handle instead and finally get the thing cracked.
@dowse737610 жыл бұрын
Me again Del another great vid sorted out my fear of getting the steering all wrong after i did the fork seals your a star thank you
@Moonfleet4110 жыл бұрын
You're welcome mate, glad it worked for you, simple things work the best aye.. cheers, Del.
@Moonfleet4111 жыл бұрын
Hi Christian, sadly you wont get a good alignment if the bike is on the stand...but if you get it all released from the top down as shown, then sit on the bike and push it off the stand...do the lunge up and down thing....and have the spanner in your back pocket....hold the bike at exact balance point...get the spanner and reach down carefully to nip the bolts up tight on the bottom yoke....then back on the stand, and do up the rest.....easy..hope that helps..good luck, Del.
@etepsnewo8 жыл бұрын
Thanks for explaining this procedure. I have my forks off my bike now while I replace the oil seals, guides and o rings so I will make sure to do this as part of the reassembly.
@Ryzen_56X8 жыл бұрын
I did the same on my Blackbird thanks to your video, and it made a world of difference now is perfect, thank you !!!
@Moonfleet418 жыл бұрын
Glad it helped buddy and you got it sorted - ride safe, Del
@dalejustice92074 жыл бұрын
We always used a spark plug socket head that will fit in the wheel bolt. Just turn it backwards n put a extension in the socket backwards n it works like a charm. But you have to have the big headed ones not the lil 5/8 ones. Hope this helps. Great video!!
@Moonfleet414 жыл бұрын
Great idea Dale.. thanks for the tip.
@kjelderg11 жыл бұрын
I've been watching piles of your videos. Thank you so much for your tips and insight! As you have shared so many tips with us, I thought I would share back a bit. You used a 24mm nut for the axle. When doing that, you can either space it off with a few washers or "make a tool" with a 24mm bolt that is tightened on and cut to length. That will make your 2-hand job a 1-hander.
@herbertXX3 жыл бұрын
You are now my teacher maintenance motorcicle here from brazil