Delboy's Garage..."MOVING AGAIN"..! (and Triumph Exhaust Polished)

[@garybrown4854]

Top tip : When I polish stainless allen heads ect I put them in a drill and spin them against the rotation of the mop , 1 it's a lot safer because you have more control there is no heat to your fingers and no chance of the mop grabbing the work out of your hand and flinging it across the room 2 it gives a better finish because you can polish for longer ,, the drill chuck doesn't damage the treads either as long as you're sensible with the tightening , hope this helps .

[@marcdavis2840]

Your one of very few presenters who can run a 10-15min video with few words, yet leave your viewers in no doubt as to what you are doing. 👍 Great job as usual. Good luck with your new unit, although lucky people tend to make their own 😀

[@Moonfleet41]

Thank you kindly Marc, I really appreciate that, I think minimal chat is the way to go, I watch 46 Works, he's one of my favourite channels to follow, and he's Japanese, doesn't speak English, but no words needed! We really appreciate your kind feedback.

[@willwye410]

@@Moonfleet41 You shouldn't have introduced me to 46Works. I could be stuck watching him for months!

[@Moonfleet41]

@@willwye410 ha ha.. they will not be wasted months..!

[@nightster6378]

Hi, when putting pipes on like you did while leaving the nuts on the studs, I sometimes put stainless domed nuts on the end of the stud's covering the exposed thread, it can save a lot of heartache in the future for either yourself or an other. On your move good luck with it, at the moment I am building a shed at the rear of my house for some of the bikes I have 23'x13' housing about 12 bikes it will leave my garage as my workshop. I also have a 24'x8' container bunged with projects the next being my 78 CBX I hope I will live long enough to complete. It's a way of life and keeps me penniless but content. Not Penny as in Penny.

[@Moonfleet41]

Good call on the dome nuts, i can order some M8's for that once this is all taken care of, but the studs themselves being stainless it shouldn't be as much of an issue as it was with the factory fittings. I love containers, they make awesome garages, i saw the Jamie Robinson made a great bike barn from two 40ft boxes, placed 8ft apart, cut the opposing sides out, and made a roof between the two from the left over steel.. then just a gate on the front.. the benefits of having land to make all those cool dreams come true, not so easy when you live in an apartment.! And you're right, motorcycle addictions will keep you broke and happy all your life.!

[@handsfree1000]

Delboy is a real hard worker deserving of a great workshop plenty of room and great equipment. I’m not jealous honestly 😅

[@abeltriumph5057]

Can’t believe it’s been a year!! Good luck with the move. Defo reconstruct that wooden bench you made. Great solid workspace

[@Moonfleet41]

Thanks buddy, i will be ripping out my bench, but only to use the wood for the new furniture.. we have some reclaimed heavy cupboards and will be making them into two big benches, much beefier then now, and lost of storage in them too.. it's gonna be an adventure, really looking forward to it!

[@martindavies8326]

Pipes look great, Wise words, safe move, see you in your new work shop, cheers Del ⚙️🔩🔧🇬🇧👍

[@Moonfleet41]

Thanks buddy 👍 it'll be a few weeks and we'll see you along the way for every step, it's gonna be an adventure!

[@RenegadesGarage]

Del.. Nice job polishing the exhaust.. It sucks that you have to move but at least you are getting a bigger unit. And we get to set how you set the space up. Bonus!!

[@Moonfleet41]

Thanks buddy, I've got the sset up planned in my head, just basic and simple with everrything in it's place, the central wall will be gone this time, which makes everything so much easier!

[@LS-uv9gg]

"Shiny!" -Captain Malcolm Reynolds, of the Firefly-class space transport vessel Serenity. Best of luck with a trouble free move, and great to hear of the new, better accommodations.

[@Moonfleet41]

Thank you Sir, it's a great adventure and really looking forward to getting stuck in!

[@GregSmith-me4ot]

G'day from Oz Del, great to see the Legend taking shape. Don't lose those handlebars in the move, I'm still keen to take them off your hands. cheers Greg

[@Moonfleet41]

Thanks Greg, really appreciate that mate, lets get all moved in and settled and ill drop you a line..

[@f.e.1952]

Matt Black and shiny pipes, gorgeous combination Delboy. Brilliant work as usual. Stay Safe mate. 👍🏍😊

[@Moonfleet41]

Thanks buddy, you too, have a great weekend.

[@Krizla4]

Dude, I still remember you building the garage and stuff ...

[@damikedaevil4582]

Guys and shiny stuff, it's so satisfying to see those pipes get the mirror finish very cool!

[@beans4491]

Wow that’s great news Del, a bigger more open space for perhaps bigger projects. Also great advice and method for polishing pipes there, looks kinda straight forward albeit maybe time consuming. Great Sunday watch for me, thanks a lot and kind regards.

[@Moonfleet41]

Hi buddy, yes a little more space to work and we can lay things out in a more convenient way. and yes, maybe some more adventurous projects in the future. Thanks for your kind support and keep safe.. D&Px

[@petebird7171]

Great job on the pipes, good luck with the move, 👍👍👍👍

[@Moonfleet41]

Thanks Pete 👍

[@michaelevans1658]

Good luck with the move ,look forward to seeing the new premises.

[@Moonfleet41]

Thanks Michael, hoping it all goes smoothly.. Fingers crossed!

[@TheJmebe]

That exhaust is a piece of art - with the added benefit of being part of a motorcycle! Lovely work

[@Moonfleet41]

Cheers Jamie, apprecaite your kind words, very happy how it turned out too!

[@bubbles1863]

Exhaust looks awesome...looking forward to seeing the new workshop del 👍

[@Moonfleet41]

Thanks 👍

[@allenhuling598]

Headers look awesome, Del, seems that this bike is gonna come out something special in the end! Happy for you to end up in a better shop space, but my word, what a busy month for you two!! Good to see you positive about it all...steady as she goes!!

[@Moonfleet41]

Thanks Allen, a busy month indeed, everything happening at once, but rather it this way, get it all over with, and a fresh new start in February! Hope you're all ok there, and keeping safe... chat soon, D&Px

[@leighmarshman5575]

Oooo nice shinny pipes now you have had a practice and passed the test I will let you do mine 😂😂 Good luck with the move and building another bench 😀👍

[@Moonfleet41]

Thanks mate, lots of fun to come!

[@loddude5706]

Having borrowed the largest tracked vehicle South of Ann Widdecombe to assist with the coming move, Del now pauses for a moment - reflecting on a time when 'workspace' meant having almost enough elbow room, but not quite, & Penny holding a plastic sheet over to keep things dry. So much 'heavy progress' in just 10 yrs . . . why? - 'because you're worth it' Have fun : ) xx

[@Moonfleet41]

Large tracked vehicle...? Strangely, you're not far wrong there brother, it's certainly large, and it would quite probably lift Ann Widdecombe, so we should have a little rest for the backs and knees this time but still taking care... all will be revealed!

[@loddude5706]

Ye Gods, they've put the Duke in harness! How to turn sliced Battenburg into raw power eh? Wondered where he'd been : )

[@richardpearson4248]

Great video they look fantastic i didn't think you was old enough del to remember stig of the dump 😄 stay safe looking forward to the new garage stay safe 🇬🇧👍

[@Moonfleet41]

haha child of the 70's mate, Worzel Gummidge, Catweazle, and Jon Pertwee was Dr Who... oh and Mr Ben, Charlie Says..., and Mary Mungo & Midge... and did you know the voice of Charlie the Cat was actually voiced by Kenny Everett, how random is that?!!

[@richardpearson4248]

@@Moonfleet41 you mist pipkins and play away 😆 stay safe mate

[@Moonfleet41]

@@richardpearson4248 Yay, Brian Cant !

[@colinburnside4425]

Fantastic work Del. Cheers and thank you.

[@Moonfleet41]

Thanks Colin, great to hear from you, have a wonderful weekend mate!

[@ludwigeilers429]

Good luck with the move. Can't wait to see the new place and the vids from there. Enjoy.

[@karlgrewcock8161]

Hope the move goes well dell and the new premises are great and that you might to modify them to suit your needs. Great video on the down pipes here to the future build and your new premises. 👍👍👍👍👍. Stay safe pal...

[@Moonfleet41]

Thanks Karl, appreciate the kind support... yes, lots to do, but we grab opportunities as they come along, and a bigger space, means Penny will have her work space too... handy for making my tea lol 👍

[@Hui9697]

Hi Del'n'Pen, Nice job as usual, pipes are great. Decent electrics will open up many new doors for you and more room will always be better. I wonder when we were young if anyone knew how famous 'Stig' of the dump would become? ;)

[@Moonfleet41]

Hi Hughie, good to hear from you! Am sharing the space with our Penny, she's closing her high street shop and gonna take her jewellery design business online, so she'll need a 'maker space' and we'll have a lot more covenient layout as well without the central wall!... and luckily, we have a great electrician who will help us wire in any 3Phase machines!

[@paulharast1958]

Awesome Job Del and Congratulations on the new place 👏 😀 👍👏👍🤝

[@Moonfleet41]

Thanks Paul, it's going to be a great adventure and we'll take the cameras along to share it all..

[@bilbo208]

Good luck with the move Del. Looking forwards to see the new place

[@Moonfleet41]

Cheers mate, long journey ahead of us, but really looking forward to it!

[@pjb5757]

Another great job Del, Stay safe and best wishes to you from NZ and good luck with the move.

[@Moonfleet41]

Thanks mate, we're really looking forward to it.. it's gonna be an adventure.

[@mdmotorcycles10]

Good luck with the move Del those headers look amazing you would probably be able to shave in them their that shiny 😀

[@Moonfleet41]

Thanks buddy, they're not quite chrome perfect, but really happy with the result!

[@wishmaster-productions]

Good luck with the move! bike is looking great.

[@Moonfleet41]

Thanks buddy 👍 we can't wait!

[@Beetlefan]

Lovely work Del, good luck with the move mate👍

[@Moonfleet41]

Thanks Jerry 👍 lots to do, but what an adventure!

[@dpryce9801]

Lovely vid as usual Del. Looking forward to the move and what ingenious furniture you come up with. Quick question as a non-biker, what’s the purpose of those bolts near the top of the exhaust pipes? Cheers, Dan

[@daveinwla6360]

Earlier on (see below) Del said he didn't know for sure but that they could've been for tuning.

[@rsbharley4766]

Very nice job Del, looks sweet. If it was not such a long way to walk around the pond I would offer to give you a hand to move lol. Hope Penny and you are keeping safe over there, as on the news it looks pretty bad. Cheers

[@Moonfleet41]

Thanks mate.. yeah, maybe a bit too far to come and help.. but thank you for the sentiment, it means a lot.. Snowed over night here, and minus 3 degrees coming over night, and more snow tomorrow.. so happy it's Sunday and we can stay inside and deal with some admin and stay safe.. Hope things are ok with you, i think we all just wanna get back to normal aye. !

[@myz06rocks]

Wow Del, can't imagine the amount of work that's going to be involved moving Del. Best wishes for the move and congrats on the upgrade. Now, to more relevant topic, I'm going to have to resist the urge to shiny up the exhaust on my bike HAHA. Lucky me though, i'm really the only person that sees them thanks to the fairings

[@Moonfleet41]

It's a mammoth task, and it's actually a three-way move, because we're closing Penny's shop down, and amalgamating it in the new garage, which we aren't in yet :-0 Thanks for your kind words, catch up soon! D&Px

[@christophermcreynolds6001]

Hi del , hope the move goes well. I am sure it will make life easier in the future ,especially with a three phase supply

[@Moonfleet41]

Sure thing mate, really looking forward to it, it's gonna be an adventure!

[@DJ-jp6xc]

As usual. Great video. Looking forward to see the new garage.

[@Moonfleet41]

Thanks 👍

[@davidcort2857]

You know, if there is a Merlin of motorcycle service and repair, it's got to be you, thanks for the vid's.

[@Moonfleet41]

Thank you Sir, that's very kind!

[@Antonio-im7yz]

Congratulations for the garage upgrade. Keep the wonderful work you do. 👌🏼👌🏼👌🏼

[@Moonfleet41]

Thank you Sir, much appreciate your support... 👍

[@duchman99backup51]

👍👍👍🏍🏍🏍🍺🍺🍺🍺 Not to bad,,,,,from an ex metal polisher,,,,👌nice del.

[@Moonfleet41]

Thanks buddy 👍 it's an honour to get approval from the trade, if I'd had healthier steel that didn't have the pockmarks left by the rusty chrome, I could have ground a little deeper and got them mirror smooth... but being a lot of work to have made them this far, I didn't wanna burn through anything or make them too thin!

[@adrianbegbie1556]

Very nice finish on exhaust . looks real good.. 😎

[@arnybarmy]

Fantastic looking system - nice work!

[@Moonfleet41]

Many thanks Sir, one step at a time, we're getting there, and enjoying every day in the garage!

[@adamburton919]

Great looking project! I just started watching this Canadian guy Ecrn Garage, he's a bit rough but does some cool stuff. Cheers!

[@Moonfleet41]

Cool, thanks, I'll check him out!

[@robertadams4415]

Good one thanks for the info

[@EdgeDynamicsEnglishRazors]

I was a little nervous watching that, those buffers can be deadly.. Good luck with the move, onwards and upwards :)

[@Moonfleet41]

Sure thing mate, you do need a bit of care and 100% attention to what you're doing!

[@haroldwiser2641]

The pipes look great, I'm a shiny chrome lover myself. Good luck on the move(s). I would help if I could, but I can't, so I won't! All the best...

[@Moonfleet41]

Thanks Harold, appreciate the sentiment, but might be expensive for you! Glad you're enjoying the videos, and thanks as ever for your kind support of us 👍

[@ObsessiveCarDetailer]

what a result, the bike is really starting to look the business. Im going to really enjoy seeing you dismantle and kit out the new workshop👍

[@Moonfleet41]

Thanks mate, big moves ahead and lots to do, but really looking forward to it!

[@timothykelley4495]

Minute 6:13 AHHHH MY EYES MY EYES... I'M BLIND!!!!!

[@Moonfleet41]

Bling!

[@bobstevens9040]

Best of luck in your new digs Del. Great job on the pipes...as ever

[@Moonfleet41]

Thanks Bob, much to do, but we'll keep the videos rolling as we go! 👍

[@softailfun]

Words of wisdom at the end man. Good to hear about the move, well done with that...... now you can find all the bits that you forgot you had 😂. RSMB.

[@Moonfleet41]

Yeah, and half a dozen 10mm spanners too hopefully..! have a great weekend brother.. kaap safe. D&Pxx

[@ninoellison7793]

Looking great, Del. All the best with prepping for the move. Exciting!

[@Moonfleet41]

Thanks mate 👍 it's gonna be an adventure and we can't wait to get started!

[@markwitham6784]

Well i hope ya got plenty of mates to help move all that kit. Pipes looking killer mate. 👍👍

[@Moonfleet41]

That's the thing mate, I have got plenty of mates all gagging to help and get involved, but with lockdown we're not allowed... but we do have a cunning plan, I've enlisted a little mechanical help ;-)

[@andrewonmyway8184]

Great job, Perfect finish. You’re right about the grinding. Quite liked Stig of the dump.

[@walcrow7319]

Been a year already? Man does time fly. Looking forward to the new place which is well deserved. Happy New Year to you both!

[@Moonfleet41]

Thank you kindly Sir, it's going to be an adventure, we didn't plan to move, it was actually a year last September, can you believe it, but we've got to have the place completely re-wired which would mean a couple of months without a garage, or take the offer of moving in to a new one... it's al little more rent, but it's bigger and everything's new inside, so well worth it... hope you're keeping safe and well there during these difficult times, always good to hear from you, all the very best, D&Px

[@Goldwing1500rider]

Your heaters burn those elec wires up?? Wink! Funny I just bought the buffering grinder for $20.. shined u few things in my garage. That’s pretty big compound you got... I got tiny ones! Shine them up!!

[@aljotock]

Good luck with the move... literally drooling over those pipes!👍🏼🆒

[@Moonfleet41]

Thanks buddy for your support, glad to hear you enjoy what we do! 👍

[@bikerdad1479]

Good luck on the move hope it goes well

[@Moonfleet41]

Thank you buddy, it's gonna be a long winded move, bit by bit, but one step at a time and we'll get through it!

[@garya3056]

Hi Del- the pipes sure came out great. I sure don’t know how you do it! Fantastic news on the move and upgraded electrical... hope it’s just wheeling stuff down a hallway or similar and doesn’t involve a truck/lorry! Have a great weekend there- (bathroom remodel now done here and on to the laundry room closet shelving!). Hi to Penny! 🏍👍🏍

[@Moonfleet41]

Hi Gary, Thankfully yes, it is just wheeling stuff next door, but that stuff is all the heavy items, two bike lifts that are 500lbs each, the lathe, press, sand booth, tool boxes and that huge shelving unit... but i have a secret weapon to help us with that, we can;t hire a gang of buddies to help with the current covid rules, but i think we'll be ok and get it all done.. Glad your projects are coming along, it's good to get the home jobs knocked off, then when this is all over we'll have time ot go play on the bikes again.. Take care and enjoy your weekend both.. Penny say's Hi.. D&Pxx

[@garya3056]

@@Moonfleet41 hi Del- the move sounds like a challenge with those heavy items. (BTW- My mother in law is available for heavy lifting if you have some back straps. You’d just need to feed her a proper English breakfast and just hose her off at the end of the day.). Hope you get to film the move! Stay safe! 😎

[@Moonfleet41]

@@garya3056 I bet your M-in-L never reads your comments... I know if I wrote that and mine read it, I'd be soooo dead! But thanks for the offer, am quite lucky to have a Penny and with a full English, she's good to go! Just need to fire up her fork lift truck and get her a hard hat... beep, beep, beep...!

[@garya3056]

@@Moonfleet41 nah, I don’t think she does. She has her own account and her interest lies mostly on how to meet single Peruvian plumbers who like to collect stamps and make their own sausages and also some vintage Benny Hill. So, she stays pretty busy. 😂

[@Moonfleet41]

@@garya3056 Sir, you are a comic genius, and I can't believe how we share the same sense of humour, I'll be you even like Monty Python... or maybe I've just blown it!!

[@garymccaughey691]

So that's why you skipped over the question when I asked it a few episodes back. Lol. Onwards and upwards mate. Good to see 2021 is starting very positively.

[@Moonfleet41]

Sorry if it seemed evasive, we didn't wanna jinx anything, and we have so much to deal with as we're also moving Penny out of her high street shop and in to a 'maker space' in the new unit, so it's a three-way move! Lots of plates spinning, so just gotta blow through it!

[@garymccaughey691]

@@Moonfleet41 nah all good bro. I had a notion it was Intentional but not in a bad way. Just keep those plates spinning and best of luck with all moves.

[@tonygriffiths2485]

Loads of elbow grease to come. Can't wait. Doing a lovely job on the exhaust, great to watch TY :)

[@Moonfleet41]

Thanks buddy, elbow grease indeed, plus WD40 for my knees and back, it's gonna be a heavy lifting time!

[@stephenbardgett847]

All the best for the new place to you and penny🏍👍

[@ian_morg]

Nice job! Shiny! Good luck with the move....again 😂😂😎👍🏼

[@Moonfleet41]

Thanks Ian, lots of plates spinning, but looking forward to a fresh start!

[@tonymartin3780]

Congratulations on the Move Del 👍🥳

[@Moonfleet41]

Cheers buddy, when all this is over, kettle's on next time you're down!

[@jamesmich4973]

Congrats on the new place man

[@Moonfleet41]

Appreciate your kind words mate.

[@datadogie]

I was just wondering about that cordless ratchet. I just bought a cheapo one. After seeing many reviews I discovered not to worry about the Nm as you break the tension as you would with a normal ratchet then spin it out with the motor. If tightening nip it up snug then use your torque. PS will you have to fill all the pin holes for the registration plates.

[@thewiltshirerider01]

Lovely job makes me want to do mine on my veradero. Good luck to you both on the move

[@wobblysauce]

Ahhh polishing, let the compound do the work, not the wheel. The pipes came out great, then comes the heat cycling and some color.

[@stevie5141]

Great stuff as usual Del, they look great and good luck with the move👍🏻

[@Moonfleet41]

Thanks 👍

[@renegade1987]

excited to see the new garage space.

[@daniellowebusiness]

Exciting news about the move Del! Love that for you

[@Moonfleet41]

Thanks mate, it's been over a year and the time's flown, but we're really looking forward to it!

[@stuartbrown7432]

Nice dell can’t wait till the move

[@Moonfleet41]

Cheers Stuart, me too!

[@motorhead7407]

good luck with the move guys. lovin the content

[@jonathanevans1305]

Stig of the Dump - one of my favourite books as a child...😂

[@fader2701]

Thanks for the video. My wife i wish you the best!

[@Moonfleet41]

Thank you Richard, it's going to be an adventure, and we're really looking forward to it. Have a good weekend both of you, and keep safe.. D&Pxx

[@brianthorpe9872]

How time flies !!

[@adallen3]

I liked the moving videos...always nice when it is an upgrade! 👍

[@Moonfleet41]

Thanks buddy👍... keeps us fit that's for sure lol

[@oleksandr_melanych]

Looks gorgeous! Thank you, Sir! :)

[@n22pdf]

Looking very nice Del.. great job

[@Moonfleet41]

Thanks Pete, good to hear from you.

[@n22pdf]

@@Moonfleet41 always been watching the new vids mate look forward to them 👍👍😎 keep up the good work

[@jedigeekbiker]

looks bloody awesome

[@Moonfleet41]

Thanks buddy..

[@andyjrichie6709]

The headers look absolutely spanking , wow moving again , well you have an awful lot to do. Hopefully everything goes well . Happy days , cheers Andy

[@Moonfleet41]

Thanks Andy, can't believe how much stuff we've accumulated, just glad it's only next door as if I needed to rent a van, this time I'd need an artic!

[@andyjrichie6709]

@@Moonfleet41 can't wait for that , luckily your new place is painted I take it , thanks for all your hard work , and sharing your thoughts and content. Stay safe

[@Moonfleet41]

@@andyjrichie6709 Thank you buddy, and no, not painted this time, and we're not going to be painting it this time either!... a friend of mine who has a bikes part company, has both his garages lined with sterling board, and I absolutely love the look!... the landlord did offer to paint the board, but I asked them to leave it bare, after all it's waterproof, way easier to screw anything to than plasterboard, and a lot warmer looking and functional!

[@joepie221]

Nice job on the pipes Del. What are the 3 button head screws for up by the first bend? Good luck with your move and best of luck for success in the new spot. Stay well Bud.

[@Moonfleet41]

Hey Joe, Those bolts plug up a hole in each pipe that was there initially for the factory to set up the carb mixture settings, they're of no real use after then, we don't have that kind of equipment in a home garage, so i just swapped out the ugly rusted hex bolts for a some tidy stainless button heads to look a little less obtrusive. Looking forward to the move and the next adventure.. Take care my friend ,and keep safe. Del

[@kevinharhat2687]

Good luck on move

[@Moonfleet41]

Thank you Kevin!

[@Gaulien]

I could almost see my reflection in those :-p

[@leeedsonetwo]

Always wondered how that sort of polishing was done, not sure my dremel will cut the mustard.

[@PaydayGabeBCNV]

😲 Wow,, 5 moves in 10yrs. I hope its the last until you get your own building🙏. The extra space and updated electric is great. Same rent?? I'd gladly help out if I were a bit closer 😁. Good luck 👍. Eagerly 👀 watching. G.

[@Moonfleet41]

Cheers buddy, we're hoping for a 10yr lease on this place, we live in an apartment, so will never have the land to build our own place, making this the best option, and it's more rent, yes, but it's a trade off as Penny now gets a 'maker space' for her design business!

[@PaydayGabeBCNV]

@@Moonfleet41 ,, Hey Del,, if it works out,, then no worries.. Just the hassle of packing and the shift to the new spot. Keep up the great work. Cheers 🍻, also. G.

[@flaviobianchessi3528]

have good moving job !!!

[@Moonfleet41]

Thank you Flavio!

[@paulosergiomelchertmarques9886]

As usual, nice job! Wish you always the best!

[@Moonfleet41]

Thank you very much Paulo!

[@djstumpy31]

Awesome job del, sorry for my absence over the last 7 months. After 26 yrs of marriage I'm now going solo. Picked myself back up and see what the rest of my life can achieve. Looking to get a new garage for my bikes and tools. I got a lot of your videos to catch up on 👍🏻

[@Moonfleet41]

Hey Gary, welcome back brother, and we're so sorry for your trouble, what a difficult time you've had then, on top of a global pandemic that's interrupted just about everything, love your positive attitude, that's what will get us all through it... so keep smiling brother, and more than anything, keep in touch and let us know how you get on, all the best, Del

[@philreadman1412]

Keep moving on, that bike gets better every time.

[@Moonfleet41]

Thank you Sir, ong way to go, but enjoying the progress!

[@jedibiker600]

Lovely job Delboy, pipes look cracking. Good luck with the move mate.:-)

[@Moonfleet41]

Thanks mate, fun days ahead! 👍

[@vmrksa]

Great job Del😃💪

[@Moonfleet41]

Glad you enjoyed it

[@khr1960]

good luck with the move hope it goes smoothly. DONT DROP THE BIKE LOL

[@Moonfleet41]

Cheers buddy, appreciate the good advice, never take anything for granted aye... we have a plan for all the lifting... and nope, it ain't Penny!

[@tinks43]

(P) And there I was thinking you built yourself a stool to sit on 🤣 pipes came up a treat. Good luck with the move.

[@Moonfleet41]

Thans mate, it's gonna be an adventure for sure... have a great weekend!

[@richardwhittle2302]

Nice pipes. Someone's a gluten for punishment but sounds like it was in the plan - onwards and upwards. Good luck 👍

[@Moonfleet41]

yeah, in the plan.. just not our plan.. we only got a single one year lease here, and it seems that was why.. they always had a long term plan for development of the estate, and as long as we benefit in the right way, im really happy it's happening..

[@richardwhittle2302]

@@Moonfleet41 Hope it goes ok will be keen so see your new place 👍

[@willwye410]

I find polishing strangely therapeutic & rewarding but I need to up my skills. It would help if I knew the differences between various compounds & mops instead of trying to learn by trial & error (lots of errors!). It would great if you did an idiots guide to this dark but eventually shiny art. Or can you recommend anything on KZbin?

[@Matt-ob3sn]

Very nice mate great job ,good luck with the move will you be taking you hand crafted bespoke custom made one of a kind chipindale inspired benches you made with you to your new venue

[@Moonfleet41]

I will indeed Sir, but probably in kit form as it was built in place, and the screws holding it to the wall and floor and buried under many pieces of wood and many screws!... but some great new bench cabinets coming from a shop fit to upcycle, and this wood will give the extra wood I need to get it fitted!

[@Matt-ob3sn]

@@Moonfleet41 looking forward to see it del

[@grosbeakmc]

Nice job on the pipes, Del. Say, when you move are you going to be able to bring the bench you built with you? Good luck with everything!

[@Moonfleet41]

Hey buddy, we'll be building new benches, this time with cupboards underneath them, we've salvaged some from a shop fit, so we'll be using the wood from the big bad bench as part of the new construction... up-cycling at it's best!

[@fredriksalmen5159]

Lovely job mate! I think we are all curious about the color! Please do a Copper/Bronze metallic 🤣

[@Moonfleet41]

Copper and bronze? A great colour scheme, but pretty much what I did on the Harley, but nothing excluded at the moment!

[@fredriksalmen5159]

@@Moonfleet41 Ohh yes, saw it now, maybe too redundant then, I think it would match all the black great though :) If you wanna keep it in the "Triump classic triple" colors, the Adventurer (horrible rear end on that bike though 🤣) came in a nice color like that one year, like this one: kzbin.info/www/bejne/foutpJ9jmsyenMk

[@Moonfleet41]

@@fredriksalmen5159 Yeah, very similar to the Harley, specially viewed with that rear duck tail fender, the biggest inspiration at the moment is the silver, grey and black union flag on the new Trident, that would be a real challenge to pull off, which makes it quite appealing!

[@fredriksalmen5159]

@@Moonfleet41 That will look really cool! I think you can do it!

[@Moonfleet41]

@@fredriksalmen5159 Yes indeed, have done it before, it's a pretty complex process but that makes is all the more fun!

[@frankt.3891]

Congratulations for the new garage. Fantastic the headed polish... I'll have to do the same on my bandit... A few days ago a plastic bag stuck over them

[@Moonfleet41]

Hey buddy, ain't that a nightmare... get in there with the Harpic X10 first, it'll clean the plastic bag off and any of the browning that Bandit pipes suffer from, should leave them a nice grey finish, and make them 10x easier to polish! Good luck...

[@frankt.3891]

@@Moonfleet41 thanks for your advice!!! ... I'll try to remove it. 💪🏼💪🏼💪🏼 The smell when the motorcycle is hot is a delicious

[@Moonfleet41]

@@frankt.3891 Nothing like a bit of hydrogen cyanide to focus your attention!

[@frankt.3891]

@@Moonfleet41 tse2.mm.bing.net/th?id=OGC.c637fb07fc0ab39acbaed2d3a8a34c5d&pid=Api&rurl=https%3a%2f%2fmedia.tenor.co%2fimages%2fc637fb07fc0ab39acbaed2d3a8a34c5d%2ftenor.gif&ehk=sTV1SKuQ4Pj6%2fMfTP%2bJV0x%2f18z1tQrsWJe4PxlItrGY%3d

[@cliffmatthews6577]

Another Great Video !

[@Broken_Arrow58]

Shiny pipes look nice. Not a fan of blacked-out bikes. The more bling the better on them since cars now are pretty much devoid af any chrome. Question: what's the purpose of those three screws towards the tops of the headers whose heads you polished?

[@Moonfleet41]

From what i can gather they're for tuning and balancing purposes, not seen them on any other exhausts, so maybe a Triumph foible back in the day.! this is a 20 year old carbed bike.!