DELUGE AUTOMATION MODE PART 1 - EXPERIMENTATION // SYNTHSTROM DELUGE TUTORIAL

[@RonCavagnaro]

Whoa don't miss meowt on all the other feature tutorials on this playlist!!! kzbin.info/aero/PLQvVnhG7o2ySxBxYQ6usQhLUgr445sEb2&si=m4s27hau2vZqz6BP

[@mrclaytron]

Awesome, Ron! Deluge would be my desert island synth/groovebox if I had to choose. No competition! To think - you could use the Deluge live record/sample feature to capture all the glitchy madness to SD card, then load it back as a sliced sample in a drum rack, or as a tuned instrument and process even further... So many possibilities!

[@mijaba]

YAY!! This is a key to the mystical door! it's ZANY! it's WHACKY! It's CRAZY! the sound design possibilities just increased by orders of magnitude. SO MUCH CONTROL!!!!

[@RSKT_music]

Been playing around with this the last couple of days. Absolutely amazing feature! Great demonstration as always Ron ❤

[@brutallyremastered4255]

"I have no idea what that is, let's..." Lol Great stuff, thanks. All v exciting - hats off to those who worked on all this!

[@Loomiedarko]

And now let's resample this and replace this basic synth note with this sample 🤪 Thank you so much for these videos about community features, this helps so much to understand them one by one, clearly.

[@postsolarpunk]

One note! Hahaha the possibilities are endless, it's so great for drum processing

[@IndividualName]

I thought of getting a pulsar 23 for some weird sounds. I might think again.

[@RonCavagnaro]

I own one and it's very very different than what I'm doing here. Equally as awesome imo

[@IndividualName]

@@RonCavagnaro I am sure it is totally different while possibly equally awesome. I was just surprised by the sound range you got from the deluge. Regarding synth sounds I mostly use the deluge for midi sketches I run through my peak and tweak there. So (ab)using the effects section from the deluge is not something I am used to or expected to sound this crazy.

[@adamoliver82]

It's very cool and tons of fun. The fact that all this can be done over midi as well is even cooler.

[@RonCavagnaro]

Thanks yes I will be doing more practical automation and midi eventually deep dives!

[@VperVendetta1992]

It can?? 😮

[@RonCavagnaro]

@@VperVendetta1992 yes there's a video on it :)

[@thesurgingmass]

Have been enjoying the automation in the beta since I bought the Deluge. Really appreciate your video!

[@MelonSprout]

wonderful explanation of this experimental automation process. straightforward and beautiful

[@RonCavagnaro]

Ah but this is just part 1!!!! ;) stay tuned!!!

[@desdoeseverything2366]

Wow! Excited to go melt my ears! Thanks for the vid!

[@jaxobophiuchi676]

These are the best, Ron. Thanks for staying dedicated to the community! Your vids have been instrumental in my use of the deluge. Can’t wait to see whats next!

[@willswitchcraft]

wow..................this is so incredibly powerful................great vid.......so much capability for exploration and creativity

[@RonCavagnaro]

Eventually I will show this applied to Line In!!!!

[@willswitchcraft]

the possibilities seem endless..............

[@RonCavagnaro]

@@willswitchcraft yes. This is just 1 synth init clip 1 kit clip

[@KatherineAftrDentist]

This sounded SO AWESOME!!

[@The-word-I-does-not-exist]

Fantastic Ron! Sounds really cool and as usual your no nonsense explanations and demonstrations make everything clear. Great job🤘🔥

[@volsteh]

Wow!

[@luvinfunvan]

This feature is amazing. So much easier to build all kinds of risers! Do all automation parameters support the variable grid? Some parameters seem to react as either all or nothing (all rows lighted at the same time level).

[@RonCavagnaro]

Not sure what you mean? What parameters are all or nothing ? I will see after your answer. Thanks!

[@seangoodvibes]

All params support the variable grid (being able to do long presses, risers, etc). He was just showing that in automation view you can increase or decrease a parameters value without automation and it just shows the entire grid rise and fall. When a parameter has been automated that doesn’t happen.

[@mrfork]

Great video. The community firmware updates are really impressive but man….not sure how I’m going to remember all the new key combos. This was a great showcase of the new automation. This would probably do great for rhythmic vocal gating too.

[@RonCavagnaro]

Will be showing more, the shortcuts are pretty basic if you watch this, I'm just turning select knob and drawing

[@TheFreeRadikal]

Very cool, I know what I'm doing for the holidays😃

[@laurencehayes2061]

Crikey- that is amazing!

[@bigbadrobbo]

Mad beats!

[@ElFlow66]

Great video again, thanks Ron! Automation view is amazing. Quick question: why do you turn up the master compressor in the beginning? So you can hear all the little changes and low sounds better?

[@RonCavagnaro]

So it doesn't clip!

[@dzaxys4643]

Awesome was already playing with the automation but you just gave me some more ideas thanks Also be careful with the resonance as well as the delay I nearly exploded my ears the other day 🙉💥💨☠️

[@Landman_sounds]

Thank you for the helpful videos!! Realizing this was the community firmware made me switch over. Also, where can I get a display like you have on the left side? Looks awesome!

[@akissparaskevopoulos]

Sounds so interesting. Thanx Mr Cavagnaro.

[@JackAcid]

I don't know what you're doing but it looks complicated! Haha! Me after watching all the video: Oohhh...those drums....😮😮😮❤❤

[@MyReasonToPlay]

wow! it's blip-blopping like a $10,000 modular system

[@crimsonfancy]

lol. "Whoah!" Yes....this is exactly what I'll do on day one of receiving mine....and I agree.

[@larsolesimonsen]

Cool stuff! Consider me inspired

[@WillKistler]

So good, thanks! Question for you: i tried to follow along and make the pad selection mode work, but it's not doing it for me like it does on your vid. Can you tell me exactly what presses you're doing? I have the old non-oled display, I'm running community forward 1.1.1, if that makes any difference.

[@WillKistler]

Nvm, did some more digging and done the shortcut for pad selection mode is shift+waveform now 😊

[@volsteh]

so this is how autechre did those tunes!

[@Sandelec-gm2cl]

I like the classic synths look.. but this machine is very powerful..✌🏻🤖

[@RonCavagnaro]

You can control with midi cc ;)

[@Sandelec-gm2cl]

@@RonCavagnaro ok..but you can program it with the display. Very nice but depend how does it cost.

[@edoardoblandamura9324]

it's crazy how you manipulated a basic drone + beat into this madness!

[@RonCavagnaro]

Well I'm just getting started... More to come!

[@HairyCaveMan]

What's that in the top left corner?

[@RonCavagnaro]

Eye candy :) A pixel surface called pixoo, company divoom

[@Dekalboy]

Does this open source firmware also exist for the deluge original screen ?

[@RonCavagnaro]

Yes for more info check link in description

[@mrpzak]

Can you use this to automate midi cc?

[@RonCavagnaro]

Yes as shown in part 2 i believe

[@mrpzak]

@@RonCavagnaro sweet! I’ll check it out. Want to automate some filter modulation on my 303.

[@RonCavagnaro]

@@mrpzak kzbin.info/www/bejne/gYOWqYd5mradZrssi=uTiEUelDLzch7tqB

[@RonCavagnaro]

@@mrpzak then send it audio in and glitch from line in osc? :)

[@mrpzak]

@@RonCavagnaro this is perfect, thanks bud!

[@melokit-music]

❤

[@andrewmorse7912]

Bloody hell!

[@neach-brathaidh-fala]

DELuge

[@RonCavagnaro]

I mispronounce it on purpose because I have a weird accent thanks