HOW TO MAKE A GLUE PULL TOWER (Part 2) | PAINTLESS DENT REPAIR |Dent-Remover

  Рет қаралды 37,549

Dent-Remover

Dent-Remover

Күн бұрын

Пікірлер: 92
@1st_track_dents
@1st_track_dents 2 жыл бұрын
Absolutely amazing Martin, for a minute I thought I was watching the Colin Furze channel! I just need to build a mobile version for out on the road 👍👍👍
@dentremover01
@dentremover01 2 жыл бұрын
Hey Jake! Yes I thought the same too! With all the sparks etc! Colin Furze is a crazy guy!!
@billseay6399
@billseay6399 5 ай бұрын
Wow just great awesome videos and dent puller
@dentremover01
@dentremover01 5 ай бұрын
Thank you so much Bill
@frankpavan7865
@frankpavan7865 Жыл бұрын
Just amazing. You created this pulling tower like you have been doing it all your life. Great video. Thank You
@dentremover01
@dentremover01 Жыл бұрын
Thanks! i had the idea for a while! it works great
@adolfoguajardo549
@adolfoguajardo549 Жыл бұрын
Desde Argentina siempre veo tu canal muchas gracias por tu aporte para esta herramienta, tus trabajos son muy buenos. Gracias por todo.
@dentremover01
@dentremover01 Жыл бұрын
Oi Adolfo obrigado palavras muito gentis de você. Espero que gostem dos meus outros vídeos também. Atenciosamente m, Martin
@jamesward5721
@jamesward5721 Жыл бұрын
I changed the way I secure our diy pulling tower - we used chain it to one of the workshops uprights - the new version doesn't need any floor/wall/chain retention - and it works great day to day - you might be interested in how it secures, just a handy way to do it - I stuck up a short vid on my crappy little channel, you'll get the gist if you have a look. Would never have thought of building one without you showing your version - mine has since done a world of work, so thank you for the inspiration. :-) .
@dentremover01
@dentremover01 Жыл бұрын
Hi James! Thank you for a great comment and your feedback. I could have start making my towers but couldn’t be bothered and would rather help people out showing my tower build. It’s amazing that you built your own…. Welcome to send pics to me if you like dent08@yahoo.com Thanks Martin
@LuisHernandez-bz5en
@LuisHernandez-bz5en 2 жыл бұрын
Aawsom tower well done 👍🛠🛠🛠🛠🛠🛠🛠🛠 star making one thanks 🙏
@LxGL82
@LxGL82 Жыл бұрын
Привет Мартин! Отличный упор у тебя! Настоящий мастер и профессионал должен уметь не только работать с профессиональным инструментом, но и уметь его изготавливать. Я очень рад! У нас каждый второй инструмент в гаражной мастерской изготовлен самостоятельно )).
@dentremover01
@dentremover01 Жыл бұрын
Привет Алексей. Спасибо за ваш комментарий! Я пытался делать инструменты, но у меня нет подходящего оборудования для этого. Думаю, мне нужны тиски и ацетиленовая горелка. молодцы, что делаете инструменты для собственного бизнеса. Я надеюсь, что бизнес также хорошо для вас? спасибо Мартин
@dentremover01
@dentremover01 Жыл бұрын
Привет Алексей. Мне удалось добавить русские субтитры к моему новому видео, которое скоро выйдет. Я также добавил русские субтитры к своему последнему видео «Will The Dents POP Out». Я не знаю, есть ли у вас время, чтобы проверить это видео и посмотреть, работает ли перевод? вам не нужно смотреть все это, просто 5 минут были бы супер помощью. Тогда я всегда буду добавлять русские и другие субтитры к своим видео. спасибо Мартин
@LxGL82
@LxGL82 Жыл бұрын
@@dentremover01 Привет! Очень здорово, что появились русские субтитры. Я обязательно посмотрю это видео и в комментарии к нему отвечу. Что касается инструментов, то иногда приходится что-то изготавливать самостоятельно для своих конкретных задач. Для некоторых мастеров эта работа является основным доходом, а для кого-то хобби. Лично для меня кузовной ремонт - это хобби и поэтому я чаще всего инструмент изготавливаю сам.
@LxGL82
@LxGL82 Жыл бұрын
@@dentremover01 У тебя хорошая мастерская и да, тебе обязательно нужны тиски и ацетиленовая горелка. Если же речь о крючках для PDR, то здесь подойдёт индукционный нагреватель (induction heater).
@dentremover01
@dentremover01 Жыл бұрын
Привет Алексей. Большое спасибо, что сообщили мне. Я использовал автопереводчик KZbin, чтобы изменить английские субтитры на русские. Было несколько разных русских диалектов на выбор, поэтому я выбрал основной русский. Я не настолько умен, чтобы переводить самостоятельно, и я хотел бы быть мультиязычным! Также да, я согласен с тем, что другие языки откроют мои видео для тех, кто не понимает английский. Я также добавил другие языки в видео. касается изготовления инструментов. У меня есть несколько идей, но определенно нужны тиски. и для других работ моя страховка может вырасти, если я возьму газовую горелку! Еще раз спасибо Мартин
@theteadrinker-143
@theteadrinker-143 Ай бұрын
Great video Martin , I’m a new subscriber and will make one of these pulling points when I get some free time , thanks love your work from Spain
@franciscoramos226
@franciscoramos226 2 жыл бұрын
Superb job, Martin. I think that "another model" has come to the market 😉 Well done! 👌
@dentremover01
@dentremover01 2 жыл бұрын
Thank you Francisco!!
@1970broncoman
@1970broncoman 2 жыл бұрын
Great work, will definitely be building mine. I especially love the channel attached to the floor. That was the missing piece of the puzzle for me. and solves my problem of buying a traditional body shop pulling tower attached with floor pots. 👏👏👏
@dentremover01
@dentremover01 2 жыл бұрын
Hi Nelson PDR my pleasure if you need any pointers just get intouch. I’m sure all the measurements are on the videos. It’s a very sturdy puller and solid when anchored into the floor Thanks Martin
@thespankinmanc1650
@thespankinmanc1650 Жыл бұрын
Did you draw up plans Martin? Awesome bit of kit by the way 🤙🏻🤙🏻🤙🏻 loving your channel.
@karolalbin
@karolalbin 2 жыл бұрын
Great job as always!
@EdmarPDR
@EdmarPDR 2 жыл бұрын
Great tutorial of how to do it Martin. Now I need to make the same tower for my garage ;) 👍
@dentremover01
@dentremover01 2 жыл бұрын
Hi Edmar thank you! Yea get one made it’s definitely worth having one
@timwest9300
@timwest9300 2 жыл бұрын
I love your vids you are a great guy thank you for your time you spend sharing with us
@dentremover01
@dentremover01 2 жыл бұрын
Thank you Tim appreciate your kind words
@dentdetailpdr
@dentdetailpdr 2 жыл бұрын
Great vid Martin!
@dentremover01
@dentremover01 2 жыл бұрын
Thanks Graham!
@WisdomInExperience
@WisdomInExperience 2 жыл бұрын
its been on my mind to build 1 for myself. this is a great idea.
@dentremover01
@dentremover01 2 жыл бұрын
Hi Shivo go for it! Welcome to make one like mine as a few other techs have. If you have a workshop then it’s a must ! Good luck
@adamcinematic9499
@adamcinematic9499 2 жыл бұрын
Hey, Thank you a lot Martin! Great production guide. I really need this thing too :) .'ll do it in the spring! Thank you your sharing dude!
@dentremover01
@dentremover01 2 жыл бұрын
Hi AdamCinematic thank you! Get one made you’ll definitely use it if that’s the kind of repairs you do All the best for 2022
@steveguest8028
@steveguest8028 2 жыл бұрын
Thats class Martin
@superkev2000
@superkev2000 2 жыл бұрын
Thanks again for the info!
@geoffreyjoseph9569
@geoffreyjoseph9569 2 жыл бұрын
Martin you nailed it big time mate .Very well done on all levels .Have one hell of an amazing New Year.
@dentremover01
@dentremover01 2 жыл бұрын
Hey Geoffrey thank you! Always seem to smash it at Christmas/New year time lol Happy new year to you and your family mate cheers 🍻
@Enrique2k52
@Enrique2k52 2 жыл бұрын
Excellent, thank you!!!
@billcui7827
@billcui7827 2 жыл бұрын
like your cup. Love What You Do.
@dentremover01
@dentremover01 2 жыл бұрын
Hi Bill it’s good isn’t it! I was at a customers and he brought me a drink so I took a pic for Instagram! But it’s a great pic! All the best for 2022
@javanis5151
@javanis5151 2 жыл бұрын
Great job with the design and ingenuity of this project. I admit I am too lazy to do all that work, I would rather just buy one lol. As a safety precaution, I would throw a towel over the chain during use incase it decides to fly off at one point, don't want to get whipped by a chain.
@dentremover01
@dentremover01 2 жыл бұрын
Hi Javani thank you I really appreciate your comment and recommendation regards the safety. Yes your absolutely correct I use to do this when jigging vehicles and do have a blanket and bungee strap to limit any sudden shock or slap Thanks again and all the best for 2022
@alexandrmelichar
@alexandrmelichar 2 жыл бұрын
You are awesome, thanks for sharing with you your knolage :)
@ФедорЛоганов
@ФедорЛоганов 2 жыл бұрын
Мастер он вовсе мастер! Браво!
@arrowvsobject
@arrowvsobject 2 жыл бұрын
Fantastic!
@dentremover01
@dentremover01 2 жыл бұрын
Thank you! 🙏 I hope it comes in handy for anyone wanting a glue pull tower without spending thousands on one! Have a great new year Martin
@ColinWoodpeckerUK
@ColinWoodpeckerUK 2 жыл бұрын
Crackin job mate, looks awesome 👌
@dentremover01
@dentremover01 2 жыл бұрын
Hey hey you finally got 5 minutes to watch it!!
@ColinWoodpeckerUK
@ColinWoodpeckerUK 2 жыл бұрын
@@dentremover01 time is precious my friend, always busy doing something! 😉 hope you got a spare gas bottle in your shop this week, it's freezing out there! 🥶 🥶 🥶
@pepehernandez1232
@pepehernandez1232 2 жыл бұрын
Thanks good exelent. Job 👍👍👍👍👍🇺🇲🇺🇲🇺🇲🇺🇲
@amitnandal5074
@amitnandal5074 2 жыл бұрын
Hi mate, can you please elaborate what final changes you made towards the end of the video? And what porta power you used ? Good stuff mate. Thanks from down under.
@dentremover01
@dentremover01 2 жыл бұрын
Hi Amit. Yes sure do you mean the foot plate and over extension pin? Are you trying to make one yourself? The porta power is a “powerTec” one which is an off the shelf kit
@danielleekirkpatrick8579
@danielleekirkpatrick8579 2 жыл бұрын
Nice video 👌🏻 just subbed 👍🏻
@dentremover01
@dentremover01 2 жыл бұрын
Hey Daniel thank you much appreciated 🙌🏼
@train4905
@train4905 2 жыл бұрын
Brill job,
@dentremover01
@dentremover01 2 жыл бұрын
Thanks Stephen 🙌🏼
@huytranvan3145
@huytranvan3145 2 жыл бұрын
Hi Bro. Could you give the name of the glue did you use to apply to plastic flange ?
@dentremover01
@dentremover01 2 жыл бұрын
Hi Huy, it is Glexo hot glue
@billramsey800
@billramsey800 2 жыл бұрын
Nice work but I think you should name it the power tower much more appropriate haha 🇬🇧💪
@dentremover01
@dentremover01 2 жыл бұрын
Happy new year Bill to you and your family. Yes your right I need a better name! I was thinking something like HULK! Lol
@junior4246
@junior4246 2 жыл бұрын
great content and very informative, makes me want to dust off my old dollies and get back at it
@dentremover01
@dentremover01 2 жыл бұрын
Hi Junior4246 thank you! and Go for it!! aLL THE BEST FOR 2022
@jasabasenara8124
@jasabasenara8124 2 жыл бұрын
You clever sod. 🙏
@karolalbin
@karolalbin 2 жыл бұрын
You' ve been lucky You didn't fall into that mazda with You feet :D Normally is just paint left with no metal behind :D
@dentremover01
@dentremover01 2 жыл бұрын
Haha that Mazda panel flattened like paper!!
@bkszarama2983
@bkszarama2983 2 жыл бұрын
👏👏👍
@dentremover01
@dentremover01 2 жыл бұрын
Thank you BK szarama
@bkszarama2983
@bkszarama2983 2 жыл бұрын
Thank from Poland 😀
@eaglebaldonetough4074
@eaglebaldonetough4074 2 жыл бұрын
Hi buddy!Am sorry am a real body shop repairer since 37 years!Never seen so weak chain to pull off fenders ok but not a girder!Same for the size of your hydraulic ram too light...
@dentremover01
@dentremover01 2 жыл бұрын
Hi EagleBaldone Tough thanks for your comments and thoughts. Yes I know the chain is a weak one compared to a body repair shop but there’s a big difference in what repairs we carry out, I’m a panel beater too and use to use the dozers, clamps and big chains for pulling chassis legs out, boot floors, sills etc and this chain wouldnt last a second Use if the above on a glue pull repair where we are sticking glue tabs to the panel I’d say it’s a little excessive and a lighter set up would work much better. I’d be extremely suprised if the chain snaps on one of my repairs and il be the first to hold my hand up if it does. As for the karabiners, yes they won’t last long so the screw type are to be used. The ram is rated to 4 tonne and from the repairs I’ve carried out upto now there hasn’t been an Issue In performance I can pump a dent out with one hand no problem. I think only time will tell with this. I put a lot of thought into the tower and I’m confident it will work without any problems for quite a while All the best for 2022 let’s hope it’s better than last year Martin
@toandy2280
@toandy2280 2 жыл бұрын
good morning
@dentremover01
@dentremover01 2 жыл бұрын
Afternoon Andy!😁
@jamesyday72
@jamesyday72 2 жыл бұрын
I still think you should market the tower Martin. Lol
@dentremover01
@dentremover01 2 жыл бұрын
Hi James! Oh if I get a break in work I may make one or 2 See what happens! Thanks for watching and commenting and all the best for 2022
@jamesyday72
@jamesyday72 2 жыл бұрын
@@dentremover01 well I reckon You'll make a killing if ya do lol same to you and the family buddy it
@dentremover01
@dentremover01 2 жыл бұрын
Money money! I like money!
@jamesyday72
@jamesyday72 2 жыл бұрын
@@dentremover01 hahaha its a rich man's world
@mattamongkun3493
@mattamongkun3493 Жыл бұрын
👍👍👍👍
@dentremover01
@dentremover01 Жыл бұрын
Thanks again
@scottpratson7766
@scottpratson7766 2 жыл бұрын
You should sell plans. Or give.
@dentremover01
@dentremover01 2 жыл бұрын
Hi Scott thanks for your message. I made the vids and added all the sizes for the project so viewers can make their own. Hope this helps? Thanks Martin
@paulpaintshop103
@paulpaintshop103 2 жыл бұрын
What's the best glue Martin?
@dentremover01
@dentremover01 2 жыл бұрын
Hi Paul. My favs are Glexo hot in the winter and Hawg (orange) in the summer (uk climate)
@paulpaintshop103
@paulpaintshop103 2 жыл бұрын
Where's the best place to get them? The stuff I've bought online has been very poor, could you recommend a seller. Thanks very much for replying 👍👍👍
@dentremover01
@dentremover01 2 жыл бұрын
@@paulpaintshop103 where do you live? Uk?
@paulpaintshop103
@paulpaintshop103 2 жыл бұрын
Yes Wigan, I have a small restoration shop and I'm interested in pdr to fill the gaps, I'm a Panelbeater by trade.
@dentremover01
@dentremover01 2 жыл бұрын
Please contact Kevin Andrews at Keco Uk in Peterborough. Mention I sent you and you want to ask about glue pulling. He’s a really nice chap and will talk you through everything for sure
@davidwgreen2403
@davidwgreen2403 6 ай бұрын
fix your sound
@dentremover01
@dentremover01 6 ай бұрын
Thanks. What part of it?
@dentremover01
@dentremover01 6 ай бұрын
Thanks. What part of it?
Players push long pins through a cardboard box attempting to pop the balloon!
00:31
If people acted like cats 🙀😹 LeoNata family #shorts
00:22
LeoNata Family
Рет қаралды 21 МЛН
1, 2, 3, 4, 5, 6, 7, 8, 9 🙈⚽️
00:46
Celine Dept
Рет қаралды 116 МЛН
H&S Pull-Pro Portable Dent Pulling Tower
3:46
H&S Autoshot
Рет қаралды 14 М.
DENT TOOLS CHALLENGE! | Can I Do It?
14:18
1st Track Dents
Рет қаралды 1,1 МЛН
HOT GLUE DENT REPAIR | STEP-BY-STEP By Dent-Remover | PDR UK
20:31
Dent-Remover
Рет қаралды 974 М.
EARN 360k - PDR Training Class
7:57
Dent Discount - PDR Training
Рет қаралды 62 М.
Glue Pulling Hail Damage - Beginner Glue Pulling Lesson
12:55
Real World PDR Training
Рет қаралды 92 М.
how to make a patch panel | fix rust
17:22
B.A.M.F
Рет қаралды 1,3 МЛН
Removing CREASES with PDR TIPS! | No Filler & No Paint
14:40
1st Track Dents
Рет қаралды 297 М.
ремонт кузова вытяжной башни
3:53
Саша ли кузовной авторемонт Ли
Рет қаралды 125 М.
Amazing Car Hacks and Tips for Fixing Dents!
9:24
Dent Discount - PDR Training
Рет қаралды 2,5 МЛН
Players push long pins through a cardboard box attempting to pop the balloon!
00:31