HOT GLUE DENT REPAIR | STEP-BY-STEP By Dent-Remover | PDR UK

How To Repair A Dent With Hot Glue?
Watch me repair this medium sized bodyline dent with the Glue Repair System (GPR) from the estimating stage, tool choice and the way I tackle the repair from start to finish. No hiding anything I explain the procedure so that YOU can easily watch the PDR process unfold
This dent was accessible from inside if the fuel filler assembly and light where removed, but our customer opted for the GPR method as it was cost effective.
Join this channel to get access to perks:
/ @dentremover01
To all the viewers asking about "How much was the job" and "you are a rip off" and " id never pay that for a pdr"
The price for this repair was around £300+ and all this money doesn't just go into my pocket to buy burgers & beer with! we have a business to run and many outgoings such as wages, PAYE insurances, rent, gas and electric, tools, stock, fuel, taxes, vat etc the list of all the bills we need to pay to operate goes on and THEN hopefully... make a bit of a PROFIT at the end of it! there are techs who'd do a repair like this for 50-100 and spend it on beer. Our business isn't for everyone but we really appreciate the support from out past clients and the support from people who see the value we bring to the table
***Please note the estimate given on the video is based on the facts of the repair, this was NOT the price we charged but would be accepted and paid by the insurance if a claim was put in
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
Do you want to try Glue pulling yourself?, Here's some affiliate links for tools on Amazon.
Car Dent Glue Pull Repairing Tools. amzn.to/3ZoZUUP
99% Isopropryl for removing the glue. amzn.to/3kvKAHb
Circular inspection board for quality control. amzn.to/3Izzucg
We love using the Gangrene tabs from Black Plague PDR, The crease tabs are the toughest on the market that ive tried so far, especially the 38mm crease tabs!! Use "Dent-Remover" in the discount section at check out!
get yours by clicking this link and also spend over $100 for free shipping
www.blackplaguepdr.com/discou...
------ Chapters------
00:00 Welcome
00:10 Visual Intro
00:28 Inspect and price the damage using Mobile Tech RX
03:10 Prepare the damaged area for PDR
03:59 What PDR glue do i use?
04:30 Using HOT Glue to repair a dent
05:44 How to fix crown, Releasing tension
07:32 Straighten the arch using force
09:39 Blending work, Highs & Lows
10:50 HOT glue pulling a dent out
11:44 Secondary damage, how to repair a crease with glue
16:19 Fine tuning ripples with HOT glue
18:35 Look at the damage from the technicians POV
18:55 Polish and then the conclusion
19:33 Before & Afters of the repair
20:20 End screen
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
#GluePullRepair #youtube #HotGlueDentRepair #growwithvideo
#EastSide #pdr #ThoseDentGuys #DentRepair #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #MartinSadler #kecoUK #paintlessdentremoval #paintlessdentrepair #paintlessdentrepairtraining #denttime #dentlesstouch

[@peterbousfield1547]

This is the best dent removal video I have seen as everything was explained in plain English, I know body lines can be awkward but this was a pleasure to watch , thank you

[@dentremover01]

Wow thank you Peter! I really appreciate your kind feedback and reading this gives me a massive boost to continue showing my repairs to you guys I really appreciate it thanks again Martin 🙌🏼

[@michaellee2746]

I agree with you. Very comprehensive as well as information on where to source the tolls

[@manojdesai5820]

​@@dentremover01 op

[@pedroaguerrevere9118]

Excellent video. First time I see those incredible tools. Really good work

[@alangrant5278]

Bodyline? Don’t me think the cricket.

[@dongnippano156]

The best craftsman I’ve ever seen on you tube. 99% of workers would have been done half way through and told the customer “that’s the best I can do at that price. If you want it better, it will be more.” But not my mate. Absolute pride in work and sheer perfection is the only standard for this fine man. Just brilliant work.

[@dentremover01]

Thank you for your kind comment. It’s a pleasure to ready great comments and feedback like yours and it’s appreciated 🙌🏼

[@kevinclynick9238]

You're the type of perfectionist I'd want working on my car. True dedication to the customer.

[@dentremover01]

Thank you Kevin, very kind of you to say this. It’s unbelievable how many people just see cost as a main factor and would rather have a cheap and possibly substandard repair carried out. Your comment and others like yours inspires me to keep on pushing!! Thanks Martin

[@goldentrunnell7450]

I'm a 60 year old bricklayer, I've been doing it since I was a kid working with my Dad and brothers. I can't count the times I've heard, "you make it look so easy". You Sir, made it look easy which is a compliment to your craft. Exceptional work and a fine video as well.

[@dentremover01]

Thank you for your kind comment, I’ve tried brick laying and there’s a lot more to it than placing bricks on cement! We both have a great skillset and you should be proud of yourself 🙌🏼 Thanks for watching Martin

[@megapangolin1093]

Fascinating, intelligent video. You are a mixture of an artist, mechanic and engineer to create this visual perfection in the wing. I was awestruck at the intensity of the work needed to recreate the wheel arch. Impressed is an understatement.

[@dentremover01]

Thank you for your kind comment. Yes there’s a lot of very meticulous tweaking going on behind a panel to repair it to a good quality. I’m very happy you appreciated the work involved and even more so that you enjoyed my video I hope you find my other videos entertaining too when you have time Thanks Martin

[@jd4x4android]

I couldn't have said it better myself. I'm a retired CGMAT (US thing!) that apprenticed in a body shop for about 2 years in the 70's, and I was mesmerized by watching you. Brilliant. You are an artist for sure. 💯 👍👍

[@dentremover01]

Thank you JD4x4 and others who’ve liked this OP from Megapangolin I really appreciate your kind words. And yes I agree I do sometimes thing of my repairs like an artist would once they’d finished painting. I’m very OCD so some of these repairs take a long time to complete. Hope you all have a great Christmas and thanks for commending JD4x4 and others

[@13panda13]

What a waffle.

[@dentremover01]

Don’t like waffles- crumpets are better

[@dylanmenzies3973]

Should get an academy award in the category of dent removal ;)

[@dentremover01]

Thank you kindly 🙌🏼

[@jamesreaves5534]

I started painting with my Grandfather at age 9 in the Bahamas back in 1972. I have been a professional painter home restoration contractor since 1980. I've been a pretty decent mechanic and repairman as well. Being a perfectionist myself I can easily recognize one when I see one. This is hands-down bar none the highest-quality dent repair work I have ever seen in my life. This blows my mind that somebody could have this kind of talent to where they can repair a car to this level of quality. I'm giving you a pat on the back and you need to give yourself one as well you are a true professional which is something you don't see much anymore. You fixed this dent the way I fix houses and other things, with nothing but quality in mind making it the best that it can be. It is easily as good as and probably better than the day it rolled off the factory floor. Unbelievable!! I can't say enough good about it there are no words to describe it. The level of workmanship surpasses anything I've ever seen in my life!! On a scale from 1 to 100... I can't say because I can't fit enough zeroes on the page. You really know your shit when it comes to repairing dents and doing body work. Best Ever hands down - bar none Rolls-Royce needs to hire you as their top body man. Best Wishes, Love and Light. God Bless You and Your Family!! Jimmy in NC....

[@1414141x]

Totally agree - an excellent job. This guy made it look relatively easy but as well as the specific tools he is using something you don't see which is his knowledge of exactly what to do and when to do it. He obviously has years of experience. As an ex bodywork guy retired years ago the system he used is new to me but works very well on the paper thin metal they use these days. Not to have to damage the paint is a huge advantage. That glue is fantastic !

[@dentremover01]

Hey Jimmy thank you so much for your great comment and well done being in the industry for so long! Bahamas sounds better than Hull il tell you that now! I love to show as much detail as possible in my videos and also try to explain in normal man’s terms what I’m doing. In the hope to educate people who haven’t seen this method before, also for new technicians wanting to learn I hope That these videos help. I’d say I have good skills but I bet there’s people out there who eclipse me on repair quality!! I hope you enjoy my new videos and again thank you so much for your kind comment it’s great to hear other people’s views and life experiences and passion Thanks Martin 🙌🏼

[@dentremover01]

Hi Chris thanks for your comment and well done for being in the trade like Jimmy in the comment above. The glue method has been around for a few years and the tools have got better and better over time. It’s able to pull soft metal, thick metal and aluminium too Thanks for commenting and I’m very happy you enjoyed my content Thanks Martin

[@deniswauchope3788]

You, sir, are a magician. If I hadn't watched you do that I never would've believed it could be done! Much respect to a master craftsman.

[@dentremover01]

Amazing comment thanks so much

[@andynightingale7335]

Love to see a craftsman taking time and pride in his work. Nice work. 👍

[@dentremover01]

Thank you Andy Much appreciated 🙌🏼

[@terrythomas790]

Its probably his car! lol. Just kidding. How does someone find a good repairman for this? I have dents on a relatively perfect 22 yr old car. Then careless a-holes open their doors without thinking. and gave me a few dings

[@stevenshore6640]

Incredible workmanship! Hard to find words to express how impressed I am.

[@dentremover01]

Thank you Steven 🙌🏼

[@DiesUndDasOderDasDa]

Unbelievable! How carelessly is the term 'perfectionist' commonly used in everyday conversations. I'll be returning to this video whenever I need to remind myself what a real perfectionist looks like!

[@dentremover01]

Wow what a great comment thank you so much!! 😊

[@basesperanca]

Indeed, I've seen a lot of videos, but only now it became 100% clear how it works. If the lines are pinching, it needs to be tapped down, otherwise, it needs to be pulled up. Clear! Thanks so much!

[@dentremover01]

Basics of using a lined reflection to repair damage yes that’s correct 🤗

[@basesperanca]

@@dentremover01 oh great you are replying to comments! I am about to buy a 2008 BMW which has a few small dents and I'm planning on trying to fix them on their own, just because I also like working with my hands. I wanted to tell you, your videos are very enjoyable to watch, I'm assuming you are editing them yourself. Soothing voice, good quality recordings, very well edited. I sometimes watch them just for fun! But hey, you were clearly in a better shape a few years ago when you started, pay attention to your health man, I want you to live long and prosper, if I may be so bold 😅 cheers bud!

[@dentremover01]

@@basesperanca lol thank you!!! Wise words there and I agree il grown in a few ways haha I’m aware of this!! And I’ve gone grey too from all the stress! I do edit the videos myself and this takes a very long time sometimes. My BMW video took over 100hrs to edit Regards my health again I’m working on this already to get me down a few stone! It’s hard work! I wish you all the very best with your own repairs but please if you struggle- STOP and call a professional for help/guidance because you MAY make it worse and then it will need painting But any help you may need then your welcome to ask and il do my best to answer All the best Martin

[@basesperanca]

@@dentremover01 absolute legend mate, much appreciated, I will take this offer. I would not worry about the grey, the ladies love a George Clooney 😎 best wishes to you, cheers!

[@charlieruisseau2476]

You're a genius! the end result is stunning! I was scared all along the second part of the video because I was thinking "Please stop, don't overdo it, you're gonna ruin a perfectly acceptable and great result by the one hit too many..." and gosh was I wrong!? I find beauty and poetry in any mancraft perfectly mastered. You make the world a better place, Sir! i'm probably still a bit drunk from yesterday, but still, I mean it!

[@dentremover01]

Thanks Charlie!! Thanks for your great comment and hope you didn’t get a hang over from your drinking! I take a lot of pride in my work as you can see and it’s great that people see this Have a great Christmas Martin

[@davidbennett906]

Amazing. I'd never realised how meticulous and high tech the methods were to repair dents. It fills me with confidence that you can do this kind of work so professionally. A great watch, thank you.

[@dentremover01]

Thank you David i appreciate your comment. Yes it’s very involved and a lot of people don’t see this. They just see it pop out and then don’t like the price. They forget about the 20 years experience and all the outgoings to run a business! Thanks for watching 🙌🏼

[@mnmlbaez]

KZbin kept autoplaying for me and when I noticed this video was on. I dont even need body repair and I still watched this video. Thanks dude

[@dentremover01]

Amazing! Thanks again 😀

[@richardalexander8264]

I would call this an illusion if I hadn't seen it with my own eyes. What a skilled man !

[@dentremover01]

Thank you! That’s why I do an in-depth video on how it’s done! Or else people don’t believe it OR they can’t see the value in our method. People simply think dents can be popped out to 100% in seconds which doesn’t happen in real life unfortunately Thanks for watching, hope you subscribed! Thanks Martin

[@balloue1]

A true professional in all senses of the word. Excellent dialogue. You made it look so effortless. I take my hat off to you Sir.

[@grahamhall8249]

That was amazing to watch. Towards the end you can see the lines of your lamp straighten up. Absolutely brilliant!

[@dentremover01]

Wow thanks Graham! I have some other great videos on my channel if you have time to watch them

[@waitemc]

I had one of these guys over at my ship to get a big dent in a polished stainless steel heated tanker 18 gauge jacket sheeting .He dident think he could do it but 30 minutes later he nailed it.

[@dentremover01]

Amazing!!!

[@panchogonzales6409]

This gentleman is an artist! Amazing work and results.

[@surindersinghsidhamerimatt3433]

You are really really real dent repair guy. You know more than enough what you doing. Perfect

[@dentremover01]

Thank you Surinder for your kind comment. I’m very happy you enjoyed the repair and video

[@1st_track_dents]

Lovely job as always mate, glue pulling can be so time consuming on jobs like this, but you smashed it, also loving the funky tunes! 😎

[@dentremover01]

Hey Jake! Thank you sir I always await your verdict on my videos! The damage didn’t look much until I really evaluated it. That bottom edge could have gone 2 ways and it took me the right way this time! I eased off on the music from last videos and I think it flows great! It’s hard to keep finding music that goes! Take care matey and keep pushing 🙌🏼

[@louisengelbrecht4067]

@@dentremover01 7

[@heberslade3588]

My glue dosent stick well. . Too much glue??? Please help😢

[@dondol7214]

I just tried this myself and searched through KZbin and this is the best video I have found! This guy is a master, I'm still learning.

[@dentremover01]

Thank you that’s amazing! Very kind of you to say and this is the kind of comment which drives me to make more content 🙌🏼 thank you and good luck with your learning

[@BenZintank]

This is really fascinating, but your patience is especially impressive. Very well done.

[@jay.fromthebay]

Wow, I didn't think such intricate work could be applied to damage like that, beautiful job!!

[@dentremover01]

Thank you Jay. It’s very satisfying to repair damage like this

[@andrewbarker3210]

Oy mate .... you missed a bit! 😂 No, but really, fantastic skills demonstration from a master craftsman with the patience of a saint.

[@dentremover01]

Haha damn! Il get them back in to rectify it!! Thank you and glad you enjoyed the repair video 😊

[@danbondy7606]

This guy is very very good, he knows what he's doing.

[@dentremover01]

Thank you Dan very kind of you to leave great feedback

[@timschutte6924]

It's funny but I made a bet with my self that when I thought you were done. Well, you were not done by far. This is due to your OCD. !!!!!!!! I have it too. Everything has to be PERFECT. I also noticed that you take great pride in your work. Not just for the camera!!!!!!!!!!! Keep up the great work my friend. Big time.

[@dentremover01]

Thanks Tim. I got the ocd! I’m never happy with my repairs! But I keep going and try my best and it works out good in the end! Thanks for your great comment mate 🙌🏼

[@karlp.1096]

You are an artist with your tools! That is awesome work!

[@dentremover01]

Thank you Karl P appreciate your comment

[@orsoncart802]

Amazing! Superb craftsmanship and tools! I wouldn’t have thought what you did was possible. Well done. 👍👍👍

[@dentremover01]

Thank you Orson yes sometimes I amaze myself too!! Thanks for watching

[@lou704]

That was absolutely amazing! Very nice work sir.

[@paulwhellams8628]

brilliant job love seeing the time and care you put into getting the right finish ....

[@prje1324]

Brilliant job mate. Admire your patients and dedication to details. Perfectly done. Thanks for the video.

[@dentremover01]

Thank you Pr Je

[@sarfraz-ulhaque7022]

Amazing! Thanks for the insight, education and sharing the knowledge Martin. All the best.

[@dentremover01]

Thank you Sarfraz merry Christmas

[@sarfraz-ulhaque7022]

@@dentremover01 Thank you, likewise and wish you a happy and prosperous New Year!

[@channelsixtyeight068_]

Amazing job, Mate. No one would ever know there had been any damage. I could see that wasn't going to be an easy repair.

[@dentremover01]

Thank you very much for your comment. Yes it took some work to get right but turned out amazing!

[@channelsixtyeight068_]

@@dentremover01 You're welcome. I always marvel at the results with PDR.

[@2loco]

You are the cosmetic surgeon of the panel repair industry.

[@dentremover01]

Wow thank you AS

[@ryanbeppu]

Brilliant! Well done with great explanations on everything from tools to techniques...

[@dentremover01]

Thank you I really appreciate your kind words

[@timmcevoy7156]

Great to watch someone excelling in their craft, truly amazing, great video always wondered how this was done!

[@dentremover01]

Thanks Tim glad you enjoyed the repair video! And thanks for commenting

[@coveycc]

I'm blown away with your talent! Great job!

[@dentremover01]

Thank you Coveycc very kind of you 🙌🏼

[@hashtagjustadad5110]

Bro…..you’re like a surgeon!!! This was so satisfying to watch!!!!

[@dentremover01]

Thank you! It is satisfying!

[@ausnorman8050]

So much better than replacing everything. Fantastic new/old school technical skills on display. Love your work mate from all the way down in OZ.

[@dentremover01]

Thanks AusNorman really appreciate your comment and yes that’s right I use my panel beating sills and PDR skills to fix damage. And agree it saves time money and hassle not having to replace panels or repaint . Thanks Martin

[@mlgboy1]

That really was some impressive work and you attention to the fine detail is admirable. having the right tools for the job and having such a high level of skill with said tools has given a first class repair. Well done you.

[@dentremover01]

Hi Mark thank you, yes there’s some nice repair saves! It took a good few years to get to this standard and as you rightly say having the right tools certainly helps Thank you for watching and commenting Martin

[@mlgboy1]

@@Bounty-Hunter69 I would be very surprised if he can get dents out of Tanks!!!

[@MUHAMMEDSHIHAS-ce8xw]

Amazing PDR technique, the way you doing is really interesting

[@ronniedio7152]

excellent non of the body shops Ive ever encountered worked with this level of precision , good to see someone take pride in their work and not just looking to take someones money while taking the easy way out of the work . a real craftsman and thats a word you dont hear anymore in the US

[@dentremover01]

Thank you Ronnie I really appreciate your kind words. I do put my all into my repairs and to hear the feedback from my customers, and my viewers is satisfying and great to hear. There’s still a lot of guys out there in bodyshops doing this type of work…. You just gotta look! Thanks again and all the best 🙏

[@seanmccomas7880]

Wow. Great job! You know, I’ve just recently learned PDR is even a thing and I’m beyond impressed with the talent involved with this craft. Keep up the good work. You are truly a talented individual!

[@dentremover01]

Thank you Sean and well done learning PDR

[@heberslade3588]

My glue dosent stick well Too much glue...please help😢

[@Carl-pg8us]

I've been a panel beater for 35yrs and I always hated using filler, it is great how things have changed, I've always thought OCD and bodywork go hand in hand.KZbin videos like this are such a great source of knowledge, really looking forward to binge watch on your other videos.

[@dentremover01]

Hi Carl thank you for your great comment Yes your right when I was panel beating I always tried to do an extra bit here and there. While learning PDR I was able to metal finish a lot of repairs and file them up and polish the surface to a mirror then progressing onto not filing down the surface meaning I was doing PDR Again with PDR I can spend hours fine tuning that dent so it’s as good as possible There’s a lot of great PDR videos out there and my latest ones keep getting Better Thanks for watching and commenting and feel free to comment On the other vids if you like something Thanks Martin

[@estebanortegatippins7849]

A shear joy to see, no paint ,no mess just neat.

[@earthkeepr7591]

What a pro this guy is. The way he handles the hammer is impressive

[@dentremover01]

Thank you!!!

[@edwardkendall3905]

Beautiful job and it shows the importance of having the right kit and the skill to use it.

[@dentremover01]

Thanks Edward. All the skills where used on this repair! Certainly tested the brains!

[@chrisrosler9964]

Good work, as always!!

[@dentremover01]

Thank you Chris much appreciated 🙌🏼

[@markthompson2466]

Talk about pride in your work.....A joy to watch! Hell you make it an absolute art form.... Who wouldn't put their pride and joy into your safe hands

[@dentremover01]

Thank you Mark I really appreciate your comment and it’s refreshing to hear that someone sees the value in my work! It’s not always about price I repair every vehicle like it’s my own. Thanks for watching and have a great day 🙌🏼

[@rabc5959]

Im now 100% comfident i can do this after half the video. Your spot on, ordering my pulling kit n going to drive carelessly from now on 🤣🤣🤣🤣🤣🤣

[@dentremover01]

Haha I’m not even 100% repairing dents! Drive safe! At least you know what’s involved!!

[@michaelhuxley5172]

Terrific job, I have similar dents in my front wing just above the leading edge body line.it will be my first attempt at glue pulling I just hope to improve the dents but if I get it perfect then that will be a bonus. Thanks for your tips Martin, just waiting for the weather to improve. Best wishes to you for the future.

[@dentremover01]

Hi Michael, thanks for your comment, all I can say is take it very steady and get use to the way it all works. Front wings are usually accessible from inside so with the correct tools you may be able to ease the damage out? Good luck and I hope you can get a good finish 👍🏼 Martin

[@bozhang515]

awesome instruction, very helpful. Thank you!

[@dentremover01]

Thank you Bo 🙏

[@jbrown7403]

Really enjoy your videos! You explain your techniques really well and you are a true dent wizard!! I spent several hours today with a “deluxe” PDR kit from Amazon for $40. I removed 2 dents including one which was on the upper curved part behind the B-pillar on my BMW M4. It was nasty but I got it about 95% perfect. I couldn’t be happier and I hope to get it to near 100% next weekend! My biggest tip for novices like me with a cheap kit is be ready for a lot of repetition and don’t give up. The rewards are well worth the effort. Cheers from Texas! 🍻

[@tonymerlocco7664]

You're really amazing. A craftsman and artist. Thank you for this video.

[@francof7720]

What an amazing job. Thank you for sharing. I really like details and showing us how it looked with the lights is astonishing. Out of curiosity (and also newbie question), in this scenario, which items did you use to polish?

[@SmileyFaceGeorge]

Nicely done 👍 I was considering pulling a similar dent from my own vehicle (I’m not a dent repair guy by any means), but now that I’ve seen how much work and skill is involved I’ll leave it to the pro’s 😂 Thanks for the very informative video!

[@dentremover01]

Hi George thanks for your comment. It’s harder than it looks and it’s always best to seek advice from a professional first. Then you can decide if you want to tackle it or not yourself☺️🙏

[@SmileyFaceGeorge]

@@dentremover01 thank you for the reply. I completely agree and so it remains as it was, dented. 😂 Perfect timing as well since only a few hours ago I added a new dent 😪

[@paddymcgrath605]

Very impressed with that. I did a panel beating and spraying YTS many many years ago (showing my age) and we used to use tac welded pins and a slide. Im amazed at how the industry has come on.

[@dentremover01]

Well done. That’s still a common panel beating technique and the bodyshops are still in the dark ages. I often repair dents with PDR for them- they then buy the kit thinking they can do it themselves😱

[@ronb4633]

You are a repair artist. Thanks for sharing

[@ceramixdetailing29]

Best video I've seen on the subject. I've been paint correcting, paint restoring and ceramic coating vehicles for a number of years and under pressure from some of my customers to provide dent repair as well. Still a long way to go with the research but you've gained a new subscriber, great channel !!👍

[@dentremover01]

Thank you Ceramic Detailing for your kind words. Why don’t you speak to a good dent tech in your area? Are you in the UN?

[@dentremover01]

Uk

[@ceramixdetailing29]

@@dentremover01 Yes, Altrincham, Cheshire

[@dentremover01]

@@ceramixdetailing29 speak to Keith Venn at cheshire dent repair hes a great guy

[@billramsey800]

Excellent work again Martin. I think you should invest in some heating system for your work shop to keep a constant working temp this would aid the repairs and keep your body in healthy condition for the long term 🇬🇧👍

[@dentremover01]

Hi Bill, thanks for your kind words! And for joining us the other night on Those Dent Guys Yes I have a heater, but with it on you can’t hear so not so good for filming! I did have it on in between shooting I will hopefully have a suspended ceiling put in this year so this will really help keep the warmth in I hate been cold! Take care, Martin

[@nedracine5364]

I just tripped across this video, and I must say, you are a miracle worker! Being in California I obviously won't ever be able to use your services, but if I need someone to fix a dent here, I hope I can find one with your talent. I was impressed!

[@dentremover01]

Hi Ned thanks for taking time to watch my video! There’s a few great techs in your area if you google Paintless dent removal California then they should come up 🙌🏼

[@WillieBeard]

More like a sculptor than a body man. Brilliant.

[@dentremover01]

Thank you Phil 🙌🏼

[@firstmkb]

I was going to say you make it look easy, but getting those kind of results looks easy for someone with a lot of training (classroom or on the job), experience, and the right tools. You are doing some amazing work there! You have inspired me to see how far I can get towards making something look less bad with an hour of KZbin, no experience, and minimal set of tools. The key to my success will be keeping my expectations low for my first attempt. Thanks for the inspiration!

[@stephenandrews1965]

What is the glue u use?I am old blokeand try to repair any thing,generally find ordinary hot melt glue unsatisfactory compared to contact cement,epoxies,or super glue.I was intrigued by the video,having only heard of pointless dent removal,always thought it was done by using spoons cleverly. I WOULD LIKE TO LEARN MORE WHERE DO I GO,I AM IN COUNTRY AUSTRALIA THANKS FOR WHAT I LEARNT SO FAR. STEPHEN.I MIGRATED FROM UK IN 1949 TO THE WONDERFUL WORLD OF OZ,BEST COUNTRY IN WORLD.

[@firstmkb]

@@stephenandrews1965 there are glues sold specifically for this if you search “paintless dent removal” or “PDR”. What I don’t know is how different those glues are from some of the other hot melt glues available. The advantage of hot melt for this is that it does NOT form the same type of permanent bond that epoxy or superglue do. Those would tear the paint off of the car, but the PDR glues just come unstuck. If it were me, I would try it with cheaper hot melt glues first, because what do you have to lose?

[@dentremover01]

Hi Kevin, and Stephen. Apologies for the delay in replying. Glue pulling can be quick to learn but it’s the knocking down of the damage and blending it back to the original shape which takes time and skill. The glue sticks are formulated to give a great bond, but to peel off as one, the diy sticks can go brittle quick and be a pain to remove. Also there’s other factors to take into account. Panel temp, temp or your location. cleaned surface, the time in which you leave to set and make the pull etc. also some dents are not glue pull dents and are better repaired with bars and tools. Again experience will help. Hot glue will pull paint off if your not careful and practice will help you figure this out. There’s training centres in Australia, also online training like “Learn PDR online” dent trainer, real world PDR training etc Have a search and you can practice using online help Hope this all makes sense and helps both of you. Thanks Martin

[@ActivateMission2ThisTimeline]

@@stephenandrews1965 itwasUntil2020came...

[@mrjones9915]

So professional and a brilliant result. Well done on all counts - including the explanations and video editing 👍

[@dentremover01]

Thank you Mr Jones

[@GS-vn8vo]

Great job! The result is unbelievable perfect. It was exciting for me to watch your video 👍🏼

[@dentremover01]

Hi GS thank you for your kind comment and great feedback. There’s a lot that goes into making these videos so it’s nice to hear people enjoy them Thanks Martin

[@minimogmulah]

When you showed the price breakdown to begin with, I was shocked. But give you credit, seeing how much effort and skill goes into your repair, worth every penny

[@dentremover01]

Thank you David. At last someone can see the value in PDR. The prices and estimate given was an example to show what it could be say if it went through insurance. At the end of the day a repair like this, to “magic” a dent from a car should be invaluable to someone wanting their car back to factory condition. Thanks for your comment I really appreciate it 🙌🏼

[@user-zm2uw5ic6j]

Impressive dent removal video! How long did the process take from start to finish?

[@nadura55]

Very impressive and meticulous work. How long does a repair like that actually take you and what do you usually charge ?

[@audistik1199]

I’ve had a fair amount of this done on cars in the past and it’s saved me lots of money keeping my cars in tip-top shape. I’d love to have a good starter kit where I could learn it myself.

[@LDCreek]

I never knew that you could fix a dent like that without Bondo, Glad I got to see your video 😊

[@chaabannasro9675]

How do I communicate with you

[@dentremover01]

Hi Chaaban you can answer any questions regarding the videos on here 😊 or please visit our website dent-remover.co.uk Thanks Martin

[@chaabannasro9675]

@@dentremover01 Do you have a Facebook page or account?

[@jamesyday72]

Fantastic work 👏 yet again Martin 👏

[@dentremover01]

Thank you James 🙌🏼

[@howardlake6178]

That’s amazing. Across a crease line like that. I’m glad I watched this 😀

[@dentremover01]

Thanks Howard! It was a beast to fix!

[@levik12]

Enjoyed watching you repair that deep dent as if it never existed! Great job.👍🏻

[@dentremover01]

Thank you Levik!

[@danielsiffredi8403]

the best dent removal video by a million miles! well done man!

[@dentremover01]

Wow thank you so much! It’s comments like this that makes me continue to make great dent repair videos Thanks and have a great Easter 🙌🏼

[@gratefuldale117]

Another new Fan here. All around precision and a joy to behold. The calmness as you perform and teach is a Step Above. Thanks. Subscribed.

[@dentremover01]

Thank you GratefulDale I really appreciate it! Glad you enjoyed the video and great feedback 🙌🏼

[@gratefuldale117]

@@dentremover01 Now I'm hooked on your work, tools and Golden Touch! Starting PDR Methadone next year, maybe? In the meantime looking forward to more more more. :-))

[@knonemous7156]

Really nice demonstration with good explanation. It’s clear you take pride in a job well done. Thanks for putting this video up!

[@dentremover01]

Thanks for watching! Appreciate you watching and commenting and of course enjoying the repair video 🙌🏼

[@franciscoramos226]

Hey Martin, fantastic repair and video. This vid is a Masterclass on GPR method. Another super big thumb up 👍👍👍for you and your work. Take care 🍻🍻

[@dentremover01]

Thank you matey!! Are you going to the Keco meet?

[@franciscoramos226]

Hey Martin, ....I'd love to and to be there with you all but, at present, I don't know if I can go. I would have liked to have gone to the previous one but I couldn't to go either. 😢

[@harolddeyoung8642]

Soooooo amazing. That quality control was superb.

[@dentremover01]

Thank you Harold

[@maxnoble523]

Gutted, I’ve watched all your videos! Your the man!

[@dentremover01]

Hi Max I have more out now!! Thank you!

[@bradhaines5711]

You have the patients of a saint. A true craftsman.

[@dentremover01]

Hi Brad. Yes I do….. but only with dents! Should hear me in a traffic jam!!! Thank you 🙏

[@sem5397]

I was captivated with the process and a job well done brother 🤜🤛

[@dentremover01]

Wow thanks SEM 😜

[@ImranKhan-K11A17]

Absolutely outstanding demonstration. Hats off 👏

[@dentremover01]

Thank you 🙌🏼

[@dembydish]

Excellent understanding and execution. A real eye opener as to what is possible.

[@jefflundquist5771]

You are a true craftsman and artist sir!

[@dentremover01]

Thank you Jeff very kind of you to say. All the best Martin

[@richardwolske2015]

I couldn’t stop watching this video! What wonderful talent you have . I’m subscribed ! 👍

[@dentremover01]

Thanks Richard!! I love your feedback and Il make sure to produce similar content as soon as possible. I have a really good indepth glue pull video coming soon so I hope you’ll like it and if so please let me know your thoughts! Thanks Martin 🙌🏼

[@adamhoneybun1166]

Great repair as usual Martin👍

[@dentremover01]

Thanks Adam 🙌🏼

[@davidmusick1673]

Awesome work. From Texas to you

[@SanDiegoSail]

Thanks for putting this video together. You did a great job of showing how much work goes into an excellent dent repair.

[@dentremover01]

Thank you so much for your comment

[@DavidLee-cf5lw]

you made the body work an art.

[@MichaelLawrence-rc3cj]

Heck of a lot of patience required even just watching someone visually appraise feel and listen their way to complete this process. I would live with dent and just reply its developed character, Ha!

[@dentremover01]

Lol thanks Michael! It’s satisfying to do and watch I think?! Like picking wallpaper off but I’d rather leave that on the wall 🤣🤣🙌🏼 thanks for watching and commenting

[@user-dapeng661]

this video is an absolute delight ... no suspense as whether it would be a perfect job, but it had me glued to every second of the process because of the matriculate craftmanship , radiating with enthusiasm and charm all along !!! Salute !!!

[@dentremover01]

Amazing comment and thank you so much for your great feedback! Always hard to make something like this interesting!! New videos coming soon which I hope you’ll enjoy too

[@stever7638]

Awesome work, was quite fascinating to see the transformation.

[@dentremover01]

Thanks Steve!! Really happy you enjoyed the repair video

[@2003evodave]

You did better than I thought possible using the glue and pull technique.

[@AHEUTUBE]

Wow! I never know Russel Crowe has a Twin Brother who excels in Car Dent repair. Big thanks, with your superb video i feel confident now to proceed with my own DIY car dent repair.🎉

[@warrencumming2267]

Just came up in my suggestions.. Glad I watched it.. Very professional & great job👍🏻

[@dentremover01]

Thank you for watching Warren I really appreciate it and thanks for your feedback. I have a brand new video out now if you want to watch more! Take care Martin

[@bartekszul8940]

Great video, thank you, not many people wants to share their knowledge and experience. Thank you

[@dentremover01]

Thank you so much for your great feedback 😊🙌🏼

[@johnbeyer791]

You saved me $600! Thank you for a well done and informative video!

[@dentremover01]

Excellent!!! Thank you for watching!!