I Repaired This BIG Dent Using A "Homemade" Glue Pulling Tower With PDR

I Repaired This BIG Dent Using A "Homemade" Glue Pulling Tower With PDR
Thank you for tuning in for my latest video repair where i show you how i repaired this massive dent on a Hyundai Tucson rear quarter panel!
This dent isn't for the faint-hearted and upon initial estimates by email i didn't think the damage would repair, but on an inspection there was hope and our customer wanted us to try the Paintless Dent Repair method to see if i could reduce the damage to a satisfactory standard so he could then have the area painted in due course.
Join this channel to get access to perks:
/ @dentremover01
This repair was the IDEAL candidate to try my NEW Homemade Glue Pulling Tower out and WOW it works fantastic..... Make sure you've subscribed already and have the notification bell clicked because theres new "How to build a glue pull tower" video(s) in the next few weeks!!
For more information on how to glue pull professionally here’s a guide from Keco Tabs. It’s really useful and if you master the 6 “C”s you’ll have no trouble glue pulling!
www.kecotabs.com/pages/pull-t...
This repair did take alot of hours to complete, in this video i try to explain all the different methods as best possible.
I hope you enjoy!
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 The dent
00:19 Intro
00:40 Estimation process
03:02 Stripping for access
03:22 Did i find any access?
04:03 THE PULLING TOWER
04:50 Starting the repair
06:04 Changing glue tabs
09:41 Using hand tools to fix the dent
11:25 Close up, so far
12:03 Get cracking on
13:26 Final words
14:00 The finished repair
15:08 End screen
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
#GluePullingTower #youtuber #DentRemoverBeverley #PaintlessDentRemoval #EastSide #pdr #ThoseDentGuys #DentRepair #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler #kecoUK

[@ljedson]

Well done it’s a great skill you have and you are a credit to your profession well done

[@climate_change_vaccine]

Wow I have worked in car body repair for 25 year and never would of thought that would of turned out so well amazing skill set you have

[@briantitchener4829]

Just watched this out of pure curiosity. Never realised glue could be that strong! Great work and very professionally done.

[@dentremover01]

Hi Brian thank you for watching! Yes hot glue is really strong some claim the pulling force can be upto 1.5 tonnes Let’s just hope the paint holds on! Thank you for finding my channel I hope you subscribed Thanks Martin

[@loubakker5000]

Wow. Takes some time but well done ?!

[@dentremover01]

Thank you Lou

[@krisknowlton5935]

I know you said it isn't 100% but the average person would never see what you see. Back many moons ago I repaired fiberglass sailplanes so to see what you do, I am truly impressed.

[@dentremover01]

Thank you Kris! I have high standards and I can always see that imperfection that just won’t come out!! But your right to the “average” person the transformation from the damage to the repaired state is a million times better and my customers are always super happy with their repairs. Sailplanes sounds interesting…. Il give that a google! Thanks for commenting and really appreciate your kind words Martin

[@krisknowlton5935]

@@dentremover01 repairing sailplanes is interesting because you not only have the cosmetic aspect but the structural repair as well. When you make a landing in a field and you don't see the tree stump coming up quickly and there is that sickening sound of snapping spars and fiberglass and you get out and look at your once beautiful bird and do a bit of crying, and then bring it to us. The last memory of their bird is a wing spar ripped up through the top of the fuselage and big gapping holes through the leading edge of the wings.(You get the picture, nasty piece of work). Then when they come back their beloved sailplane looks brand new again. If you don't take pride in your work you shouldn't be in that line of work. I ground out delaminated fiberglass and layered in new and made new wing roots and sanded and sanded and sanded some more. But you removed a dent in metal without grinding and using bondo and having to repaint! To me that is pure talent and a man with a helluva an eye. I wish you had repaired my car.

[@andyl6962]

Great job fella. You certainly are skilled.

[@stejac51]

... Very nice ... some wicked skills displayed ..

[@gavinoliver8074]

Love seeing new uploads mate. Hope you're well and have a great Christmas 🎄.

[@dentremover01]

Hi Gavin thank you I really appreciate you like my videos….. there’s 10s of hours which goes into editing these! I’m looking forward to sharing the videos with you all. All the best and have a great Christmas with your family

[@davidwebb8877]

Spot on…..👍

[@1889viking]

Fantastic job fella 👏 👍 👌

[@phillipkeenan6092]

Great work, amazing end result.

[@dentremover01]

Thank you Phillip 🙌🏼

[@janobelo]

Such a Great tutorial, amazing end result…well done

[@dentremover01]

Thank you Jano! Thanks for watching and commenting, All the best for 2022

[@spencerwvcmoon]

Persistence and patience pays off! Again incredible repair.

[@dentremover01]

Thanks Spencer! Hope your well

[@dentremover01]

Thanks Spencer! Hope your well

[@spencerwvcmoon]

@@dentremover01 yes thank you Martin just recovering from a catteracts operation WOW ! Amaaaazing difference it's great.have a great day bud.

[@chewie3397]

One word fantastic work. 👍

[@dentremover01]

Thank you Chewie! 🙌🏼

[@markpiercy133]

Amazing work😎

[@ilbandzprettymoneygangprod6595]

A cheat code😏I like it.

[@dentremover01]

Thanks! Cheat codes only sometimes! Other times it’s a long slog!

[@wildcard2668]

Awsome job 👏

[@scottcrawford4148]

Amazing engineering effort on your puller tool!

[@dentremover01]

Wow thank you Scott I really appreciate your kind comment 🙌🏼

[@gersonjesusdelreygutierrez3700]

Felicidades un trabajo súper limpio

[@dentremover01]

Hola Gerson Muchísimas gracias. feliz Año Nuevo para usted

[@balloney2175]

Awesome!

[@ozakarisozacra6499]

Amazing skils..!!

[@dentremover01]

Thank you 🙏

[@ronwebster4764]

Good job very well done👍👍👍

[@dentremover01]

Thank you 🙌🏼

[@RichieAustinMagician]

such a shame your not nearer to me you seem to be more skilled than most PDR companies taking on more complex dents like i have on my door !

[@dentremover01]

Hi Richie thank you for your kind words and sorry we’re too far away for you. Where are you located? Thanks Martin

[@billramsey800]

Lovely, have a great Xmas and a happy new year thank you 🇬🇧🦘

[@dentremover01]

Hi Bill thanks! Merry Christmas to you and your family

[@cJ-cr8gp]

Magic happening right there!!!! Wish you were in Spain..!!

[@thrustmeister]

Good work fella, its come up like new!

[@johnhanson4795]

love your tower thats pretty cool!

[@dentremover01]

Thank you! I used it again yesterday on a job! It’s super!

[@SalvageMasterEssex]

Top quality work mate. Hope you and your family have a Merry Christmas and a Happy New Year 👍👍

[@dentremover01]

Hi Corey thank you! And merry Christmas and a happy new year to you and family

[@rodneybooth4069]

Impressive. WTG!!

[@andrewt7735]

Great repair and huge kudos for not drilling any holes in the arch!! Have a great Xmas and new year 👍

[@dentremover01]

Hi Andrew thank you, yes I don’t like to drill unless I have to with customer consent I could have got a bar in there behind the light or through the holes but wanted to glue pull this as much as possible. It turned out well and was happy considering the bottom part was really tough to fix! Merry Christmas Andrew to you and your family and all the best for 2022

[@nikpatel16]

Good work ! Have a good Christmas! and all the best for 2022!!

[@dentremover01]

Thanks Nik all the best to you and your family and see you soon

[@dominikk3677]

Nice work.

[@dentremover01]

Thank you Dominik 🙌🏼

[@paulfalconer3598]

Good work mate 👍

[@dentremover01]

Thanks Paul!

[@PDR1985]

I'm with you bro, keep it up!

[@dentremover01]

Thank you PDR Doc! 🙌🏼

[@user-rh1lz3tl1s]

Отличная работа!

[@dentremover01]

Thank you!

[@aminsajawal3935]

Just describe to your channel as a x pannel beater I’m l well impressed with your work and love the home made jig. Keep it up and happy new year 🥳

[@dentremover01]

Hi Amin thank you so much. If your from a panel beating back ground you’ll know how it all works and it’s amazing what can be repaired! The jig is awesome too it saves a lot of work (on the body) happy new year to you and your family 🙌🏼

[@davecooke914]

Great job just subscribed look forward seeing more videos keep up great work 👍 👍

[@dentremover01]

Thanks again Dave appreciate you subscribing 😊🙏

[@franciscoramos226]

Excellent video and superb repair, as usual, Martin. I really love your homemade glue pulling tower, it's an awesome tool that seems to work like a charm, as Jake said to you. .....I wish you and your family a Merry Christmas and a Happy, Healthy, and Prosperous New Year!! 🍾🥂🥂

[@dentremover01]

Hey Francisco thank you! It’s a great video it took an age to make but it’s really entertaining How was the music? My next videos coming up are how to make this pulling tower. I hope you and your family have a great Christmas and a happy new year 🔔 🎄 🍻

[@franciscoramos226]

For me, the music of the vid is perfect and it is perfectly edited in it. I love it! As I make some of my tools, ...you hit the nail on the head with your next video 😉 I'm sure it will be super interesting. Take care and see you soon🍻

[@dentremover01]

Thanks! Yes they are really informative and entertaining to watch! Passed the time anyway!

[@mandymoo7406]

Brilliant tower and repair,can I suggest you put an old bit of wilton carpet on the chain in case something fails and the chain tries to hit you,the carpet takes the hurtness out

[@dentremover01]

Hi Mandy Moo thank you! Yes this is something I’m doing as you say those chains can do alot of damage, I’ve also got an elastic bungee to catch the connector to stop it whipping around Thank you for your thoughts and Part 2 of this build will be ready to watch tomorrow evening Take care, Martin

[@andrewboggis3174]

Nice tower 👍🏼

[@dentremover01]

Thank you Andrew! Yea I’ve wanted one for ages but couldn’t find the one which I liked and they are a ton of money- so I made my own! Thanks for watching and commenting

[@StE_sufc_1889]

Nice mate 👍👍

[@dentremover01]

Thanks Steve

[@jasabasenara8124]

Be nice to see customers reactions if possible. 👍

[@masterofnaji9440]

تسلم ايدك بجد

[@Johnx961]

I dont know how you did that mate, amazing skill.

[@dentremover01]

Thank you John really appreciate you watching the vid and enjoying it 🙌🏼

[@superkev2000]

Great work Martin! I would love to see a detailed video of your tower design and how it was constructed. Merry Christmas!

[@dentremover01]

Hi Kevin thanks for your kind words, yes there’s 2 videos coming out soon showing a very detailed build process so anyone can copy and make their own. Part 1 will be out soon! Merry Christmas to you and your family have a wonderful day today 🎁 🎄

[@superkev2000]

​@@dentremover01 looking forward to it!

[@dentremover01]

Hi Kevin, part 1 is now live on my channel and I posted it on your group Hope it helps folk and thanks

[@ozgurgorpuz]

Bravo bro

[@dentremover01]

Thank you 🙌🏼

[@luismontano1270]

Hello Martin.. Great video.. I like the tower.. Thank you.. What is the cost of that repair?..

[@boosthit811]

What was the total time spent doing this repair? Excellent work.

[@mvasquez6667]

Thanks for the vids. Can you give us price comparison between PDR and paintshop costs please. Cheers.

[@LearnPDROnline]

Awesome repair, you're an inspiration! Definitely earned yourself a christmas drink or two there buddy

[@dentremover01]

Hi Tom! Thanks really appreciate your kind words and straight back at you. My new video (part 1) glue tower build is going live today at 12 lunchtime! That’s about beer o clock I think

[@LearnPDROnline]

@@dentremover01 beer o clock on the hour every hour 🍺 🎅

[@dentremover01]

Beer! I had a beer watching a short arse fix a BMW foot long crease

[@alfonsocastellano1993]

best compliments...

[@dentremover01]

Thank you Alfronso merry Christmas to you and family

[@dentremover01]

Alfonso 🙌🏼

[@jamesyday72]

Have a good one buddy see ya in the new year

[@dentremover01]

Hi James thanks for catching the video while you was working I hope you enjoyed it. Merry Christmas to you and family

[@jamesyday72]

@@dentremover01 I wouldn't have missed it buddy it was very informative 👍same to you and your family

[@markconnors3269]

Maté amazing can’t believe no paint !😮 very very patient mate sick job Sort my Vivaro for me please lol

[@dentremover01]

Thank you Mark! I can look if your local

[@markconnors3269]

@@dentremover01 where are you located please?

[@dentremover01]

@markconnors3269 beverley, East Yorkshire 😀

[@markconnors3269]

@@dentremover01 ohh blimey 😦 bit far away

[@Wisdom_maroc]

God Job

[@djlord9189]

Nice. How many hrs? I’m a car restorer. Am interested to start incorporating this method to our restorations. Do not currently use glue pulling.

[@terrysmith6562]

Hi Martin. Happy New Year to all. You mentioned that you didn't want to damage the holes. Would you hot glue a washer over a hole so that you can lever off it and not do damage? Remove the washer with alcohol as usual afterwards. All the best. Terry.

[@dentremover01]

Hi Terry happy new year to you. Yes I think that maybe a good idea and I can certainly give it a try and let you know. I’d imagine I’d need a strong holding hot glue for this, and use lots to smother the full washer but yes that’s a great idea to try Thanks Martin

[@WhitneyStephenGater]

Top job! Video on the puller would be good! 👍

[@dentremover01]

Hi Whitney Stephen thanks for your comment, there’s a couple of videos coming soon showing the full build process for the glue tower. Your welcome to copy and build one yourself!

[@WhitneyStephenGater]

@@dentremover01 Excellent! I have something similar that I built a while ago (they're really expensive and I'm a tight git 😂) but your appears to operate in a different manner, hence the interest to see it in detail. I look forward to the videos! Hope you have a good Christmas👍

[@Jazzhog]

Pretty sharp work. I noticed that you peeling off the bumper cover @ 3:17 but then it was still attached to the quarter. Looks to me that you would've had ideal access to reach the dent from behind the bumper cover. I'm not a PDR tech but I've been a collision tech for many years. Removing the bumper cover for access would've been the better approach. Better leverage with a sturdy rod instead of the ol hook rod. Also noticed that you cut the final clip showing the end result with the ol hook. I was very anxious to see that and you duped me ! SUP With that Martin ? 🤔🙄 No pun intended, just my 2. 😁

[@dentremover01]

Hi Jazz thanks for your comment and I’m too curious to see exactly what your on about do I will go through my original edits and see if there’s anything of interest! I absolutely hate watching my videos back lol but I will!!! Speak soon Martin

[@maheshvalmiki]

Grade video, may know the glue specifications.. glue make , type and buy guide

[@dentremover01]

Thank you Maheshkumar the glue I was using was Keco’s CamAuto collision glue. You can find this on Keco Uk or Anson (USA) website Thanks Martin

[@Robcatist]

Nothing short of incredible I’ve heard of the paint-less dent removal but never took it seriously until now. How successful is it on say small car park dents?

[@dentremover01]

Wow thank you for your kind words- pdr is a really effective method of repair g dents without painting- it’s not well known so it’s great to show off the method and skill and show that it’s not only a repair.paint and we can actually magic dents out! Thanks Martin

[@EdmarPDR]

great tower Martin. did you mount it to the ground or wall for more safe of repair? I like that kind of repairs. big nasty dents give You bigger satisfying of your work. Great video 👍

[@dentremover01]

Thank you Edmar, yes I have now as it was the first time I’d used the tower on this repair. I’ve since made an anchor system I have the new video going live today (part 1) of the glue tower build

[@terrysmith3281]

Thanks Martin and I'll look forward to your comments.

[@dentremover01]

Thanks Terry 😊🙌🏼

[@JoaoSilva-fy9hf]

Quamto tempo para fazer um amassado desse amigo .... ficou bom parabens...

[@dentremover01]

Hi Joao thanks for your message, the damage took about 6-7 hours to complete… that’s without any filming time. It took 10 hours that day to complete Thanks Martin

[@mnmike59]

Awesome instructional video!!!! PLEASE STOP turning the annoying music volume up between speaking.

[@dentremover01]

Sorry Mike, gotta try these things but glad you enjoyed the practical bit. I’ve eased the soundtrack on newer vids 🙌🏼

[@michaelbublitz8855]

Awesome job mate, how do you remove the glue from the body?

[@dentremover01]

Hi Michael, we use alcohol or panelwipe

[@johnhanson4795]

ive noticed when i do that when i start tapping the crown down the tab lets loose which is annoying seems to hold good till i start tapping highs down dunno if its the vibration or what but everytime bang it pops off ive used cam auto collision glue ect gets pretty annoying i clean everything real good even torch panel and tab before

[@dentremover01]

Hi John. I know what you mean. All I can say is to double up on cleaning the tabs and surface. Keep the correct temp and play with the timings. Sometimes I don’t get on with my set up and have to adjust to suit As an example yesterday I had to polish the panel as it had a ceramic coating and the glue wouldn’t stick. Once I polished up and panel wiped it and used heat- it stuck like super glue I had my pulling tower with a lot of pressure on the tab, while knocking the high spots down and it wasn’t letting go. Also try to use more glue? You’ll get there I’m sure, just a bit frustrating when your working against the clock

[@1st_track_dents]

Great Video Martin, loving the homemade tower, looks like it worked a treat! wishing you and the family the best Christmas and lots of success in 2022!!! 🎅 🍺

[@dentremover01]

Hi Jake! Thank you very much for watching and commenting! Yea it’s good isn’t it! I wanted a tower but couldn’t find the one I liked and they are a load of money (Tight Yorkshireman) so I made my own! I have a 2 part video ready to launch soon on how to make this tower from start to finish! See how those vids turn out on here ! Merry Christmas and a happy new year to you and family and hope your health improves and you can jump back into it for 2022 🙌🏼 🍻

[@carsformersofficial]

You making a really high quality video but you did that repair wrong way. If you ever will traveling to Russia please welcome to Saint-Petersburg 🙌🏻 We have a lot of things to talk about together and if we showing to people professional PDR we have no chance for mistakes and must teach them right way. No mater how difficult repairs we have the principles are doesn’t change. I really love your style and passion Martin! With much respect! (Stanislav)

[@dentremover01]

Hi Stanislav thank you for your comments, the repair on the 1/4 I could have repaired a few different ways but wanted to use the glue pull tower to show it working. Realistically I should have also used the bars aswell. I’d love to know how you would repair this kind of dent as that’s how we all learn and master the skill. I’d love to come over one day, il admit I don’t know when that may be but when the various shows are on then one day we could meet up and have a good chat about pdr over a beer or three! I’ve found your channel and subscribed, will catch up on your videos and see how you work. Looks like your videos are getting great views already so we’ll do e to you. Thanks again and take care Martin

[@carsformersofficial]

@@dentremover01 Thanks that you don’t angry about my comment mate🙌🏻 About beer or three - that’s very good idea and I believe we’ll meet one day! About that kind of damage - using the tower is absolutely correct (if you have it) But! First thing is that kind of damage have a compression nature and exactly lower body line and a part under the plastic fender hold all that system. It’s a main target. Second one is a crown on the top! We must try to pull the lower part of the damage then we should glued to the upper body line but just to create a tension and tap down the crown directly to the body line. If we don’t do that like you do the crown and lower part locks the middle part so strong and you just stretched the metal but basically all system don’t move out. Please try to imagine that process like a sectional diagram (I hope that’s correct words) Unlock the crown and part under the fender with lower body line and you win easy! And last thing. That was a deepest fragment of the dent by your right hand if you looking on it. You glued the Black Plague green tab but the core of that part was right above lower body line. Any tab will pull better by the center it’s axiom. Crease tabs works correctly if you glued to the equal part. In your situation the tension on the deeper fragment was much stronger than top part and your pull comes irregular - top part came out much easier and just pinches the deep part. So we should to glue so that the center of tab coincides with the center of the deep part. I always focused on two things: how to create a original form (not the some shape looks like original) and how I can build it with no stretching a metal. Just pull and push it in right direction and with a right strategy and sequence. Better do it by small steps because a small step it’s a small mistake probability! Big step like a hard pull can bring us a lot of problems if we going wrong. It’s just a puzzle. And that simply things very important TODAY because the metal of modern cars is shit! So we right on the minefield. We need to heal it don’t stretch. Looking for the stress points, contrast parts of the damage and unlock it. Let the metal flow in the original shape. Often it’s only one right way to each damage and main task is finding that way. We have all tools to win! Good luck Martin! Sadly my channel on Russian language but it’s a pleasure that you are the one of my followers 🤙🏻☺️

[@carsformersofficial]

I hope you will understand what I want to say! My English is not so good 🤓 Thank you!

[@jesustorres1543]

Can it remove a crease dent on a tailgate between the letters?

[@ryansteenvoorden8323]

Hi mate, can I ask what glue you use please?

[@kevinlong8517]

Hi how much did it cost thanks

[@tridentpdrltd1506]

Ser gut mein frund. Das ist de betse repairung vom ein technica. Dunbist ein Got All the best. 2nd in command 🤟🏻🎅🏻🤟🏻

[@dentremover01]

Danke mein Freund für deine netten Worte! Alles Gute und frohe Weihnachten ol Bean

[@tridentpdrltd1506]

@@dentremover01 well Google translated mucka !!! 😂🤣😂🤣

[@dentremover01]

Haha

[@johnhanson4795]

i live in a cold climate to and most dents like that the paint is cracked from impact from the cold so glue pulling works but still needs painting

[@dentremover01]

Hi John, thanks for your comment, do you warm the panel up before repairing? Or is it that the paint has become brittle from the constant cold climate? Must be difficult to trust a glue pull if so

[@johnhanson4795]

@@dentremover01 its usually when the panel is hit and cold and cracks the paint

[@adreenryan2901]

What is the glue called and how do you remove it from paint on the car.

[@mindaugasvaicekauskas9377]

I like your red T4. Is it waiting for the summer?

[@dentremover01]

Hi Mindaugas thanks for your message, yes it is! It’s still waiting for last summer too 😂 it’s a 1998 model with 60k and it’s been resprayed, so it’s in excellent condition!

[@robertlee4172]

***MAKE A VIDEO OF THE PULLING TOWER!!!*** (yes, I just subscribed)

[@robertlee4172]

OK, never mind. I found your link.

[@dentremover01]

Hi Robert Lee! Thanks for your comments and glad you found the links/videos I hope you enjoyed them? Thanks for subscribing also I really appreciate it Thanks Martin

[@robertlee4172]

@@dentremover01 I found a retailer selling a dent pull tower online, $1500.00 usd. Yours is a much better alternative to buying what's available. Thanks for sharing the design.

[@dentremover01]

Thank you @@robertlee4172 I really appreciate your feedback. I had the same issue, most of them are simple L shape towers where you need to use a Jack to secure (clamp) it to the chassis of the car Or made from mechano a 5 year old could put together- that thing is gonna bend and wobble like mad. Also the rachet strap idea I don’t like as your adding in needed pressure to the tab when ratcheting - wobbling the strap I thought a lot about this tower and kept adding to it and re designing it. I could have made a batch and tried going to market with them or going in with a Pdr company but cannot be bothered- too much hassle I’d rather help the techs out and show that you can make one yourself for no money at all and it’s better Il be adding a few extras to it soon so il bring out a quick vid on that too Thanks Martin

[@flippingcars101]

Great work mate I’m definitely going to use you going forward. Just sub to the channel as well.

[@dentremover01]

Hi Thanks for your kind words, please give me a link to your channel or spell it for me as I can only partially see your name Thanks Martin

[@user-pj4vl3kg3i]

That's amazing. How many hours did it take to work?

[@dentremover01]

Thank you, it took about 6-7 hours for the dent repair to be completed

[@user-pj4vl3kg3i]

@@dentremover01 You're such a great technician in the world.

[@dentremover01]

Thank you I really appreciate your kind words

[@mrlondon963]

Could you have used more heat (100⁰C) and use suction pads?

[@dentremover01]

Hi Mate. I do t think that would work- realistically it’s either bars or hot glue/ or luck Hot water, plungers ets are not going to work or maybe partially work. It’s easy to lift the majority of the damage up- the skill is making it 98%- 99% where we save it from a paint shop

[@waltradcliffe4482]

At my shop in Ohio US. I don’t see dents like this, the ones I work on are usually cut to the metal or ripped completely off I use the paint less repair to keep me from having to get into an adjacent panel for color blending onto the next panel, thank you for the videos I have learned a lot from watching them

[@dentremover01]

Hi Walt thanks for your comment, yes I know that type of damage you mention, I use to repair that when I was in the bodyshop and used pdr to minimise the painting like you do. This damage takes a while to repair but is totally worth it and when the customer comes to pick their vehicle up the satisfaction is great Thanks for watching and glad you can take bits away to help with your work Merry Christmas and a happy new year

[@MaximMdUSA]

👍👍👍

[@dentremover01]

Thank you

[@clebsondosreisrego3391]

👏👏👏👏👏👏

[@johndegraaff59]

Beautiful work buddy but the music sucks

[@dentremover01]

Thanks John. Yes I think the music is Marmite. But I’ve toned it down in my newer videos. Got to try these things

[@jimruthem6587]

When I turn down the music I miss some of the comments you're making as you work. As I appreciate the running commentary my suggestion is to lose the music. Great Instructional video.

[@dentremover01]

Hi Jim thanks for your comment, yes I’m aware that some of my videos have loud music and I apologise When editing it’s good to try different ways to make a video and I tried the loud music and it wasn’t so popular. I can’t get rid of this music I don’t think and I’d be surprised if I still have an edit-able copy where I can delete the soundtracks. But il take a look for you Thanks Martin

[@LuisHernandez-bz5en]

Well done 👍 send me the picture of pulling tower thanks 🙏

[@dentremover01]

Hi Luis thank you for your comment, there will be a couple of videos coming soon on how to build your own glue tower. They will be live to view in the next few days Thanks Martin

[@TanjuAydin528]

Is the pump tool special? is it sold?

[@dentremover01]

Hi, thanks for your comment, I made this pulling tower and I also made a video on how to make your own, your welcome to copy the design and all the measurements are on the video Good luck

[@TanjuAydin528]

@@dentremover01 Thank you so much for watching.

[@vehiclesprayerssociety]

😍😍😍😍😍

[@neilfinch8331]

How much would you charge for something like this to be done

[@dentremover01]

Every dent and repair is different and also circumstances I think this was around 5-600 on the basis it was a push to paint. In the USA this would be thousands to fix

[@user-ys2en2fq3v]

👌🏼👍

[@dentremover01]

Thank you

[@omarf2406]

Great video, but that loud music is really nerve-racking.

[@dentremover01]

Hi Omar, yes I’ve had a few viewers not like the music and I apologies. It’s very 50/50 and I have to try different things in order to get that perfect balance of video My accent is very boring! And I can’t talk about the job all the way through as I may upset other viewers! Point taken and Il try to tone down in future vids. Actually my latest video was toned down if you want to check it out

[@user-xn5gc1ih1f]

👋👍

[@peverill64]

Can you pull dents out of a Land Rover discovery one?

[@dentremover01]

Yes I can take dents out of any vehicle if the damage is repairable ☺️

[@peverill64]

@@dentremover01 I am in North Borneo and nobody does that here...Was wondering how to do it to a 1991 Land Rover Discovery I have inherited .

[@dentremover01]

Ah got you, well you can learn with simple tools, there’s lots of online training aswell It may help you?

[@AMindInOverdrive]

Cracks me up when I see guys tapping on the car with that little hammer - Just reminds me of the Father Ted episode: kzbin.info/www/bejne/r2KsoXiCeLmLa9k

[@dentremover01]

Hahahaha me too sometimes!! Great episode that was !!

[@clebsondosreisrego3391]

🚀👏👏👏

[@zabirdokrat363]

Where are you based? Would like prices

[@dentremover01]

Thanks Zabir, we are in Beverley (East Yorkshire)

[@mlrocky1]

Interested in the process and results, but the noise for music really was annoying and add nothing to the video!

[@dentremover01]

Sorry about the music

[@dannyvien6329]

Where you located

[@dentremover01]

Hi Danny we’re on Beverley, East Yorkshire

[@harrynewbrook5103]

Tidy job is that

[@E.v.g.e.n.]

👦👌🔥

[@mirceabotea3647]

Muzic is very loud .

[@dentremover01]

Hi Micea thanks for your comment and yes a few people have already said, I apologies and will double check the volume in future Hope you still enjoyed the video(s) Take care, martin

[@dharmenkumar9323]

What is the name of first tab

[@SalvageMasterEssex]

He said in video Keco Centerpide crease tab 👍

[@dentremover01]

Hi Dharmen thank you for your question, it’s called a Keco tab. If you was to go on Kecotabs.co.uk you’ll see the full range of these tabs under Glue pull/tabs Thanks Martin

[@dentremover01]

Thanks Corey

[@nikpatel16]

@@dentremover01 Corey lol

[@dentremover01]

Hi Nik how are you