If I was doing this myself on my car, would have been happy around the 8 or 9 min mark. But I love watching a professional who takes pride in their work.
@PATWENTY8RКүн бұрын
Awesome skill and patience.
@miken8720Күн бұрын
Cheap a__ cars today
@craigc1101Күн бұрын
Need to learn PDR !
@coreybishop376822 сағат бұрын
Think he already knows it quite well lol
@craigc110122 сағат бұрын
I mean me 😂
@PaulReynolds-qn6riКүн бұрын
Boy i had to sell ny gold chain to help out my daughter and grandkids i take any one of then and work for it❤
@dentremover01Күн бұрын
Thanks for your comment
@gillianallan8852Күн бұрын
When if feels so good lol
@dentremover01Күн бұрын
When it works- it does!!
@markcliffe7Күн бұрын
Wow, great to see a proper craftsman at work, great vid
@dentremover01Күн бұрын
Thank you kindly 🙌🏼
@broccolihart1Күн бұрын
Nice technique
@dentremover01Күн бұрын
Thank you !
@broccolihart1Күн бұрын
I wish they all worked that way 🤨😀
@broccolihart1Күн бұрын
Love your hammer technique
@allenwilson65852 күн бұрын
Bigger wheels, longer ramp needed.
@stevedunshea42612 күн бұрын
When you put the glue pullers at the top I was yelling at the screen, Don't do it! The paint will crack! I was glad to be proven wrong.
@dentremover012 күн бұрын
Amazing! I’m very happy I showed you how it’s possible to save a panel from the bodyshop and I hope you enjoyed it
@edwardhermann48462 күн бұрын
How much does this repair cost?
@dentremover012 күн бұрын
From 300 +
@bother18442 күн бұрын
How long did the repair take?
@dentremover012 күн бұрын
This took a day to fix from memory
@JOHNABLANK2 күн бұрын
Great job! It is amazing how this can be done without filler or paint.
@dentremover012 күн бұрын
Thank you! With time, patience, the correct tools and skill. These repairs are possible
@andyjohnson14682 күн бұрын
WOW awesome Nice work!!!😊
@dentremover012 күн бұрын
Thank you so much
@oldgitsknowstuff2 күн бұрын
I thought that Teslas are so advanced they pull thier own dents out. Or simply reverse the film.
@dentremover012 күн бұрын
Not quite. It’s still metal
@Brownwaffles2 күн бұрын
How much US dollars would a repair like this cost I’d like to know
@dentremover012 күн бұрын
I couldn’t say for sure. But I’ve seen repairs similar and smaller than this priced up for a couple of grand. They have carfax over there which makes PDR great for cars. Keeping cars off the carfax register so the PDR industry can charge a lot more and also insurance too. In the uk there’s no such register so if I say 300-400 then a small bodyshop may charge 250 to fill and repaint the side. So uk PDR have to price reasonably
@irfandemirhan59382 күн бұрын
Oooohhhh 😄😄Adam sanatkâr yaptığı işten sevk alıyor kolay gelsin. Biz de o sesi kahve içerken yapalım.
@andyhedges57053 күн бұрын
If only Father Ted had access to your services. m.kzbin.info/www/bejne/r2KsoXiCeLmLa9k&pp=ygUOZmF0aGVyIHRlZCBjYXI%3D
@safetyworld64543 күн бұрын
Can I get your contact details
@kennycochran92633 күн бұрын
The tool works. I had a small dent in my door. Bodyman had similar but smaller tool, dropped it down inside the glass, and pushed the dent out of my door. Took 45-60 minutes and he slowly fixed the dent.
@dentremover012 күн бұрын
Amazing thank you for your great comment!
@joelkoonce85593 күн бұрын
Thanks again Martin. I've been doing PDR for 25 years. Your an inspiration.
@dentremover012 күн бұрын
Hi Joel. Thank you so much for watching my videos and enjoying them. Congrats for your 25yrs magic in dents out it’s some skill we have. We inspire each other 🙌🏼
@darrelneidiffer67773 күн бұрын
Wow, lots of info... Blocked
@toddjenest32123 күн бұрын
My tabs never come off that clean and they usually fall off after the first pool. Then I spend about five minutes getting the glue off the car.
@dentremover012 күн бұрын
Ok. The glue needs slightly warming to help it come off in most cases. I use Glexo hot glue or Brazilian ninja glue (dark green) as this peels off in one go. The reason why the tabs falling off could be a few things. Firstly you need to correctly degreaser the panel and get rid of all contaminants. Use paper roll and 99% isopropyl and warm the area up with a heat gun and let settle to an ambient temp. Pulling the tab at 29°C is the best temp and the tab will pull well. If the glue goes all bitty when the tab has come off, either warm it up slightly with a heat gun, or put new glue onto the same tab and stick onto the bitty glue. Spray with iso immediately and carefully peel off. It will all come off in one go Hope this helps
@jasonlabanowski60113 күн бұрын
Nice work mate ❤
@dentremover012 күн бұрын
Thanks Jason & Chrissie
@channex81793 күн бұрын
Just spotted this Martin, cracking video and thanks again ❤ If anybody watching this needs a difficult dent removing you are definitely the man for the job!!
@dentremover013 күн бұрын
Thank you 🙏
@SherxujaUroqov4 күн бұрын
Oymasan kiykushunkai osss
@dentremover013 күн бұрын
Thanks
@dentremover013 күн бұрын
Thanks
@ShemayaWalker-Owen4 күн бұрын
I dont understand...
@cringelord10862 күн бұрын
It’s a car dent remover
@dentremover012 күн бұрын
Thanks 🙏
@ShemayaWalker-OwenКүн бұрын
K thanks 😊
@Hardship-and-Succes4 күн бұрын
What is that black rubber you use
@antonio82714 күн бұрын
Spiega spiega ,, e non si vede un cazzo
@AD-hs4cw4 күн бұрын
that tool will wreck the crap out of that dent....there are other guys ..professionals that will take that out from the front
@dentremover014 күн бұрын
Dude. Did you click on the full repair video that’s linked to this shorts clip! I think know what I’m doing! Maybe watch it right the way through and you might learn something ☺️🙌🏼
@paulskivington464 күн бұрын
Hi where are you based in the uk
@dentremover014 күн бұрын
Hi Paul. We’re in Beverley. East Yorkshire
@paulskivington464 күн бұрын
Hi mate thank you for the reply back to me 👍🏻
@mubzadz95384 күн бұрын
What's was the cost for the repair?
@dentremover014 күн бұрын
From 300+vat
@ColinWoodpeckerUK5 күн бұрын
Get some Brandy in that coffee lad, you've earned it. Excellent result! 💪🫡😎😂
@dentremover015 күн бұрын
Mmmm Brandy
@michaelkitchen60005 күн бұрын
What do you pay yourself per hour doing these dent removals?
@dentremover015 күн бұрын
Not enough
@michaelbabatunde39155 күн бұрын
Good Note, only if the sheet metal deformation is not beyond elastic limit
@dentremover014 күн бұрын
We can repair stretched dents too using electronic tools which heat small areas up without damaging the paint
@mozed58325 күн бұрын
Well done matey, thank you for sharing your skills 👍
@dentremover014 күн бұрын
Thanks so much
@Ryan-vj9bl5 күн бұрын
Nice
@dudrchichiev78725 күн бұрын
👍🏻👍🏻👍🏻👍🏻
@NigeUK0075 күн бұрын
Amazing! An absolute labour of love to get those panels back to that shape.
@dentremover015 күн бұрын
Thanks Nigel! Yes it took a day to get that panel looking straight again! Thanks for commenting 😊
@DentBaron5 күн бұрын
Definitely nice too see the tool help.
@dentremover015 күн бұрын
Thanks mate
@samg16675 күн бұрын
Best in the business
@dentremover015 күн бұрын
Thanks Sam very kind of you 🙌🏼
@E.v.g.e.n.5 күн бұрын
🧑🤘🔥🔥🔥
@lexus2845 күн бұрын
Hi friend...how much time you need for this demage?
@dentremover015 күн бұрын
Thanks, this 1/4 tool 1 day to fix
@lexus2845 күн бұрын
Hi friend...a sisyphean job...🥵 thanks for the reply! Best regards
@shopsmile93365 күн бұрын
Amazing work 💯
@dentremover015 күн бұрын
Thank you! Cheers!
@scrapper6665 күн бұрын
It’s iso-pro-PILL, not iso-pro-PRILL.
@dentremover015 күн бұрын
Thanks dad
@grantssmartrepairs5 күн бұрын
👍👍👍
@dentremover015 күн бұрын
Thanks Grant
@ralphhunt52256 күн бұрын
Lame, show the receipts, or go home.
@dentremover015 күн бұрын
I’m home. What next
@craigbrett6726 күн бұрын
Maximum respect Martin, great job!
@dentremover016 күн бұрын
Thanks Craig! Glad it didn’t happen to your Tesla door. Hope it still looks great and have a great weekend too
@craigbrett6726 күн бұрын
@@dentremover01 Still looks perfect Martin, happy everytime I look at it and always try to recommend you to anyone needing PDR