Unbelievable Paintless Dent Repair On A Jaguar F Pace With Zero Filler!

[@ІванФаринюк-о6ф]

Чудова робота,дуже гарний мастерклас,результат перевершує всі очікування!

[@dentremover01]

Thank you so much

[@w66269300]

Finally new video upload! A big fan here from Taiwan , I’m also learning PDR skill and I will open a shop like yours your video always help me a lot

[@dentremover01]

I’m sorry to keep you waiting! This would have been out sooner but I lost the edit! Then I found it a week later!

[@dentremover01]

Good luck with your PDR journey 🙌🏼

[@jaiminor]

Excellent Repair Martin. 🍻 👏👏

[@dentremover01]

Thanks Jaiminor !

[@autobodytrainingsolutions838]

As always, I’m impressed. Nice job. By the way, I thought I was the only one that spins my hammers in my hand but I see you do it too. Greg

[@dentremover01]

Thank you! Nooo I always spin the hammer! I do lots of twizzly things with not! My hammer has a great feel and weight to it! It’s a Shane jacks hammer

[@LearnPDROnline]

Awesome repair and video Martin, great explanation and tons of good info here

[@dentremover01]

Thanks Tom! Nearly didn’t happen but I think you sent me a good vibe and I found the missing vid edit!!

[@andyrazzell1080]

Absolutely first class Martin, great video and tool explanation, Cheers!

[@dentremover01]

Thanks Andy!! You made this video happen!

[@spencerwvcmoon]

Yet another masterclass ❤

[@dentremover01]

Thanks Spencer!

[@inversioneselexodo2360]

Excelente trabajo y muy buena explicación Saludos Ruben Ibañez Guatemala

[@dentremover01]

Thank you Ruben’s happy new year to you and family

[@paulwhite4931]

That is some top quality workmanship, amazing job mate

[@mrgrumpy5116]

very good result, as usual I'm impressed

[@dentremover01]

If I can make Mr Grumpt happy- then I’m happy

[@davidoldacre]

an amazing skill . this guy is a genius .

[@dentremover01]

Thanks David!

[@Francedsp.]

incredible repair for an incredible technician congratulations for this aluminum work Martin

[@dentremover01]

Thank you FranceDSP !

[@dentremover01]

This was a steel door sorry! But still a great save 😊

[@Francedsp.]

@ ohhhh a steel jaguar door 🤐 in any case very nice repair and as usual a source of inspiration and very educational 🔥🔥

[@dentremover01]

Thank you! Yea Jaguar and Range Rover swap and change panel materials! I can’t keep up! I just use a magnet to check every time!! Happy new year mate

[@NavdeepSingh-x8f]

Amazing work Martin. As always your talent is priceless. New techs like me learn so much by just watching you. I think we all need to appreciate the effort of making these videos let alone trying to fix a dent of that size, post editing and time needed is certainly not easy. It was also good to see you really didn't use any rods......unless I missed something. lol this was certainly eye opening as I would I have gone in with the rods after about about 1 hrs of reducing work and caused all sorts of push marks. (I guess that's why they call you big daddy of PDR world) LOL Jokes aside Martin....thank you and happy new year my brother. Nav

[@mikeogrady5299]

You do a great job with these!

[@dentremover01]

Thank you!

[@georgemorrison6689]

Great job your a very good tradesmen, its always nice when it comes together, look forward to the next upload, have a great new year

[@kevinferguson2325]

Great repair on the Jag Martin 👏👏👏👏👍

[@richardsedorski1206]

Very skilled operator well done.👍👍👍

[@SalvageMasterEssex]

Top quality repair. The owner got an early Christmas treat getting that dent repaired by PDR as it would have cost a fortune for a new door and the hassle of trying to get the paint matched to the existing panels. You deserve a pat on the back for that one mate 👍👍

[@dentremover01]

Thanks for your great comment! Yea I’d say so, plenty of folk think a replacement door and repaint is 3-400 but realistically it’s a lot more for a professional bodyshop job. PDR saved a lot of hassle and kept the OG paint as you say 🙌🏼

[@echassin]

That was an amazing repair! Maybe glue a strap above the heavier LTS beam to hold it up if it pops loose? One strap in the middle might be enough because one glue joint will always pop first leaving the other joint and the strap to hold the beam up.

[@dentremover01]

Thanks for your comment. Yes I normally do add a strap above as I don’t fully trust heavy tools on doors. I wasn’t expecting it to jump off like it did. I should have stopped when I saw the glue start to come away

[@julesmatthews2178]

@@dentremover01brilliant work that Martin well done 🥳💯

[@BackboneNF]

Wow👍 great work

[@dentremover01]

Thank you!!

[@dentdetailpdr]

Great repair and video mate

[@dentremover01]

Thanks boss PDR master blaster

[@joaquinruz4505]

He disfrutado mucho el vídeo ya que lo he podido escuchar en Español muy buen trabajo cómo siempre

[@Kapustkin_Stavr]

HI Martin. GREAT JOB!!!

[@jehlesmartrepair5980]

Always a pleasure to watch, great job👊🤙🫶

[@LaneStevens]

Awesome repair. Would love to see some videos over the use of lateral tension. Just ordered my first bars from metal medic

[@dentremover01]

Thank you! I have a few other videos using lateral tension. The white Mokka door has LTS on it

[@LaneStevens]

@ awesome, I’ll check it out!

[@jvftools]

Great repair Martin ! cheers Jonathan

[@dentremover01]

Thanks Jonathan! The JVF system is the best imo 🙌🏼

[@AlexAlex-y8c8c]

Top Man Martin 😎🤩

[@dentremover01]

Thanks Alex!

[@mapstardamo1624]

What a magician 🎉

[@ragnarironspear1791]

Always interesting videos 👍🏻👍🏻🇬🇧

[@allenwilson6585]

great job!!!!!!!

[@dentremover01]

Thanks Allen

[@BTO_86]

Genial en español master❤ saludos

[@dentremover01]

Thank you!!

[@claudioandersonribeiro6763]

Trabalho profissional, parabéns!

[@petefletcher]

I'm very impressed with your wizardry! Question; Do you do motorcycle tanks? I'm actually just up the road from you.

[@atlanticpaintlessdentrepai6781]

Hey Martin, Where can I get that stand that is holding your elimadent light?

[@dentremover01]

Hi! I attach the Elim a dent to a pole stand using an adapter called a Medusa ansonpdr.com/en-gb/products/elim-a-dent-medusa-adapter-for-dewalt-battery The stand I got a few years ago and it was from Ukraine so I don’t know if it’s still available. But if you got the Medusa then you can buy a pole to fit the diameter and then make the base? If you look at the link I gave you, there’s other options too Hope this helps and HNY

[@gmbodyshop3322]

Great videos. How do you like the JVF tension bar? Do you think it is worth it for my first investment in tension tool? I’m watching all your videos and love your channel. Great work

[@dentremover01]

Thanks. Yes I love it, it’s 100% worth the investment. The glue coming away on the tab is user error or complacency my fault

[@danielrobinson6719]

I think you mentioned it earlier but arn’t these later jag doors not aluminium?

[@dentremover01]

No this was steel- jag and RR like to swap and change panel material with each model- I get confused too!

[@danielrobinson6719]

@@dentremover01 wow that’s interesting, personally I think the jag looked harder to do than the white Vauxhall, but you did miracles on both. I enjoyed watching see you on your next mission and Happy New year pal.

[@declanmceleney2263]

How much did you charge to fix that?

[@dentremover01]

Thanks I think this was around 1200

[@marcelorosa2698]

Acho que se você remover a porta e por em um cavalete ia facilitar bastante.

[@Mercedes-Benz606]

Сколько сантиметров штанга re tension system?

[@dentremover01]

Hi, the kit comes with both 2ft and 4ft beams. There are 2m beams available from JVFtools.com

[@JohnSadler-f4z]

Obviously a 'Domestic' !

[@eco796]

$$ ???

[@jge5419]

I.A horrible je coupe

[@yanowski5645]

we have a guy comes to our car lot . he charges £25 a dent top man

[@eazyd1983]

Where are you based?