This Repair Is AMAZING | We Show You The Full Process | By Dent-Remover

[@prebaned]

It's not the tools, its the man behind them that makes the magic.

[@dentremover01]

Thank you so much for your kind words

[@dangerclose5400]

I gained IQ just by watching this video. Again, superb technical repair! The explanation of aluminium vs metal repair is spot on and the way you explain it is perfect. Great job good sir.

[@dentremover01]

Wow thanks! Your really liking my videos it’s a pleasure to read your nice feedback I try my best with all the videos I make to show as much as possible. I hope you can take something away from the vids Thanks Martin

[@noahschaefer428]

Thats a beautiful finish. Closest thing ive seen to 100 percent. No cheating with the camera no bs. Great quality work

[@dentremover01]

Thank you so much Noah

[@marekkalinowski6370]

Best, I’m mean the best detailed pdr video I have ever watched! Well done for showing every stage of repair on this difficult part of aluminium panel. No drilling, no fake after repair shots, all done with proper way of PDR. Martin you’re doing fantastic work showing the public all secrets of paintless dent repair, and also very nice to see how Your KZbin channel is growing! My hat is off for you 👌

[@dentremover01]

Hi Marek thanks!! I tried my best to show all the main areas of the repair and explain the best I could! Was hard work! If you look closely you’ll see my watch flick up the time throughout the vid! Take care and see you in near future hopefully at a meet/show Thanks Martin

[@1st_track_dents]

Amazing Job Martin, those types of jobs I think are always a gamble as you just never know how the Aluminium is going to react. Having years of experience and lots of skill help on these jobs and you have plenty of both, well done, super clean repair, customer must have been over the moon! 🌜🌜🌜

[@dentremover01]

Hi Jake thanks! Yea I get a lot of jobs where it’s a “see how it goes” I knew it was going to be tough but to be fair it went very well..... just took a lot to flatten it out 😂 Managed to get it sub 30mins too 😂👍🏻 Thanks for commenting and watching Jake... Martin

[@BilalBilal-gy6dg]

I spent long time watching PDR techs on youtube, and by far you are the best among them. Great work, great explanation, great filming, and great personality. Love you man and thanks for teaching us ❤️

[@dentremover01]

Hi Bilal thank you so much I really appreciate your feedback. My aim is to show anyone what I’m repairing without all the whistles and bangs, il continue to add as much content and value to my future videos and very happy I can help you and others Take care, Martin

[@ozakarisozacra6499]

GREAT VIDEO...LOTS OF SKILLS AT PLAY ALONG WITH GENEROSITY SHARING HIS KNOWLEDGE....ALL BEST MATE..!!!

[@dingking7577]

Great job bud! Yeah they felt that for a few days. Love the Dent Cam.

[@dentremover01]

Haha I bet

[@superkev2000]

Another excellent repair and great video too! Very nice job on both Martin! You are highly skilled! People have no idea how tough these repairs can be to make look this nice. Take care!

[@dentremover01]

Thanks Kevin. This dent was quite tough but I was amazed with the end result. I really appreciate your feedback on it. Are you going to the MTE in January?

[@superkev2000]

@@dentremover01 I'm not sure about MTE yet but that sure would be a lot of fun!

[@dentremover01]

Ah ok. Hopefully things change and you can go 😊

[@johnintelisano887]

Beautiful repair Martin! Any one that has never worked aluminum could not begin to understand how difficult that repair was and you glassed it ! 👍👊

[@dentremover01]

Hi John thanks for watching and commenting..... yes it’s a lot harder to work on than steel for sure! Just need time and patience and it will be sorted!! Take care Martin

[@fabioalvarez6139]

De lo mejor que hay en el mercado! Aprendo mucho de usted para trabajarlo aquí en 🇨🇷 Le felicito

[@Kylesweeting]

Holy cow that came out PERFECT. Even with two full days i don’t think i could have gotten it THAT clean. Absolutely no distortion! You set the bar INCREDIBLY high lol

[@dentremover01]

Thank you Kyle I really appreciate your comment and yes it was a tough one to do! Thanks Martin

[@dannylee9138]

Learn more on each video great talent and work keep them coming

[@dentremover01]

Thank you Danny 🙌🏼

[@terrysmith6562]

Hi Martin. Hot glue a large washer over the access hole and remove with alcohol after the repair. Fantastic video as usual thanks.

[@adamhoneybun1166]

Martin absolute perfection thanks for your videos been a pdr tech for 15 years still learning so much.

[@dentremover01]

Hi Adam thank you! Great to hear from other techs and I hope your busy, safe and well Thanks martin

[@zeuszerzura8542]

impressive !! You are a real artist!!

[@dentremover01]

Thank you Zeus merry Christmas

[@emmettcoen]

Genuinely.. Your material is really really good.. Excellent upload.. Seriously good breakdown.. Really nice and refreshing.. No loud music.. Fancy graphics and bull... Just a genuine tradesman 👍 much respect from Galway 👌

[@dentremover01]

Thank you Emy Bear really appreciate your comment. I don’t like putting music on my vids as it’s difficult to find decent tracks and also in the past I haven’t been very vocal so needed to bulk the vid out. I take all comments on board and hopefully my next repair you’ll also like Thanks Martin

[@delare4]

great job i learned something, be patient, and patient, and patient take your time, thanks for the video

[@dentremover01]

Wonderful thank you Delmar I’m glad you enjoyed it

[@billgwilliam1263]

Watched a few videos by this man recently and found them to be very informative. I was amazed some years ago by a successful PDR repair on my car & intrigued ever since. Recently after the misfortune to have a minor door ding on the panel crease I attempted this myself by the push method he demonstrates & achieved a most successful result. Thank you for the well presented information on technique.👍

[@Ray50d]

Well deserved thumbs up. Always a joy to watch you repairing these nasty dents and making people happy. 👍🏻

[@dentremover01]

Thank you Ray50d my pleasure

[@davedefehr7477]

Very impressive work. Well done!

[@dentremover01]

Thank you Dave 🙌🏼

[@fedakgabor5787]

Gratulálok! Nagyon szép munka! Üdvözlettel Magyarországról!

[@dentremover01]

Hi Fedák Gábor Děkuji moc, jsem velmi rád, že se vám to líbilo

[@ArchieversKingdom]

Brilliant work Martin , well done 👍👍

[@mikeclifton7778]

Absolutely superb results and all fully explained, the lined card gives an excellent view of the recovery process, now a subscriber.

[@massimo6770]

You are absolutely amazing! You also took into account the orange peel. An artist!

[@dentremover01]

Thanks for your comment, yes the paint texture is very important and using a fog board is usually better to maintain the texture, but with time and patience you can achieve amazing results with a line board More vids coming soon and I’m my next repair videos I make il look at explaining texture a bit more Thanks Martin

[@massimo6770]

@@dentremover01 thanks. Wait for the next vids!

[@dentremover01]

My next video does infact mention the orange peel so I hop you enjoy the vid

[@jasabasenara8124]

Awesome work. Very professional. 👍 I think yourself and Jake should do a big repair together. That would make a great video.

[@dentremover01]

Thanks again Jasaba I will ask Jake and see what he says! Although he’s about 4 hours from me!

[@jasabasenara8124]

@@dentremover01 oh is he. Might be difficult that one lol.

[@franciscoramos226]

A BIG Thumb for you, Martin. An outstanding repair on aluminium bodyline and a great explanation about it. Well done!! 👏👏👍💯

[@dentremover01]

Thank you Francisco really appreciate your feedback. Very happy you enjoyed the repair vid 😊

[@alasag877]

You are the best learned a lot watching you work.

[@davedowner3802]

Hello Martin,I just spent some time watching 2 of your repairs useing the PDR Method.Both Repairs were very well done.Its Truly an Art.Its all about the Ability to Read the Metal or Aluminum Panel and to Reverse the Damadges by studying how the damage affected the panel, looking to see if the workhardened areas like body lines were affected,and allways work from the good to the bad.Followed as you Started by reversing the Lowest damadge or dents by use of your plastic pull tabs and glue and then reversing the smaller damadge and then getting the pull tabs and straight ingredients the body lines followed by massaging the eyebrows (high areas back down) Proceeding to finalizing the smallest dimples and dings and then to machine buffing the clearcoat which also creates small amount of heat to and kinda blends out the finish to what I would consider an Exelcent Suburb Repair.Great Job Martin.I had 35 years experience in Automotive Body Repair and after 17 yr became Collision Center Owner,Operator and I enjoyed my career so much that I worked 16 hr day,6 and 7 days a week until becoming disabled and unable to work.

[@dentremover01]

Hi Dave. Thanks for watching my videos and commenting. Yes that’s pretty much it. Just very controlled pushes and seeing how the panel reacts, basically trying to level up the panel without making push marks so by using certain tips and glue systems amazing results can be achieved. I started as a panel beater, then learnt pdr. It is tough on the body sometimes- like today my hands where killing! I hope you find my other videos to keep you entertained, and take care of yourself Kind regards Martin

[@julianfisher6373]

Great work Martin really shows your skill & perfection with aluminium, enjoyed the video & keep them coming !

[@dentremover01]

Thank you Julian really appreciate your comment and for taking the time to watch the video

[@geoffcole3533]

Well delivered video , like the way you explain your procedures. Real tester for any tech.

[@dentremover01]

Hi Geoff thank you for watching and commenting. Yes it was a really tough dent to repair but worth showing the process so people can see that they don’t “just” pop out Thanks Martin

[@geoffcole3533]

@@dentremover01 Martin do you put actual time of repair also a cost to the client , that sort of damage app $700 in Aus

[@dentremover01]

Hi Geoff good question, throughout the repair video you can see my watch ping up the time. I think I started at 9:30 and finished at 2ish... price ranges can vary for these kinds of repairs. You can only earn if the customer is willing to pay for the job too

[@Hammondt88]

Thanks for taking the time and effort making these video's, the finished repair was incredible. P.s thanks for the glue and tabs :)

[@dentremover01]

Hi Tom thanks!! My pleasure are you finding the stuff good to use? Thanks Martin

[@Hammondt88]

@@dentremover01 great to use buddy :)

[@paulinmazurek2769]

Fantastic job never seen it done before you must be in great demand.

[@andrewboggis3174]

Nice repair Martin that looked a tight little bugger.. nice quality Repair..

[@dentremover01]

Hi Andrew thank you, very happy you enjoyed the video 😊👍🏻

[@johnnymastor]

Great job full of details.

[@dentremover01]

Thank you John Merry Christmas

[@GreyscaleCharles]

Nice job, thanks for fixing my brothers car. 🤘

[@steveguest8028]

This is fascinating to watch Martin

[@stephencroft6481]

Great craftsmanship

[@dentremover01]

Thanks Stephen

[@Thenoobity1]

Another mint video Martin 😁 amazing how you are able to read the metal and anticipate how it will react!

[@dentremover01]

Hi Lee thanks for watching, yes it takes a lot of experience and a bit of luck (I think) to repair some of these dents I fix.... this one came out great that’s why I’m proud to show people it! Take care, Martin

[@Thenoobity1]

Dent-Remover 100%! Same to you Martin 😀

[@dents-b-gonedarwinnt8355]

Another high quality repair mate. Great work...look forward to the next one😉👍

[@dentremover01]

Thanks Adam very happy you enjoyed it 👍🏻

[@paorarokino]

You Are very skilled really enjoyed the vid

[@dentremover01]

Thank you Paul really appreciate your comment and for watching

[@engineer17151]

Awesome panel repair skills ... make it look easy but I'd bet my shirt it's definately not, unless of course you're properly trained. Brilliant

[@bother1844]

Wow, amazing, as a body man I must say this is excellent work. Thank you for your sharing and awesome tips. Greetings from USA Cleveland.

[@dentremover01]

Hi Raymond thanks! You’ll be able to relate to it then..... super hard with it being Aluminium, I’m glad you enjoyed it...... actually had a BMW in yesterday with a similar dent but the price was high and I advised a repair and paint just to be safe Take care and stay safe Martin

[@bother1844]

@@dentremover01 Thanks and you be safe as well. Just curious, how long did it take you to do this awesome repair?

[@dentremover01]

Thanks, I’d say the majority of a day... with the filming Aswell. I could probably have done it in 4 hours or so?

[@bother1844]

@@dentremover01 I tip my hat to you mate. It would take me a day's work prepping for paint and $$$ in materials plus drying sanding and polishing time. Not to mention a color match blending. I understand perfectly the method you are teaching being I have 44 years of experience working with metal nevertheless the biggest problem I have is choosing what tools to use for certain PDR jobs. I spent ten grand at ding king institute to learn this method of dent repair two weeks training. Honestly what I got out of it was the theory. They rent cars that are easy to access for dent repairs for the students to practice on. They knock dents in them and have the students fix them after one week of theory. I left very unhappily with the hope that with what I learned I would build on it and practice. I am getting pretty good at it but honestly, your videos would have saved me a lot of money. If I had the funds I would train all over again but with someone like you that shares honest teaching knowledge. I find glue pulling amazing, and I am getting pretty good at it.

[@dentremover01]

Hi Raymond thanks for your message. I’ve heard a few stories about Ding Kings training. I haven’t looked into the training side of things but I try to explain the repair procedure on my vids so that beginner or advanced techs can watch and maybe take away a tip, skill etc or make the mind think and ultimately help others out. I don’t know everything but my methods may be different to other techs. Keep at it. Learn your way and tweek your repair method. As long as you can get the dent out your doing it right 🙌🏼🔥

[@greetingsbox4229]

Smoothing out the dents and the stubble nice work.

[@dentremover01]

Thanks Daniel 👍🏻😊

[@billramsey800]

Hi Martin what can I say absolutely amazing thank you sir. 🇬🇧

[@dentremover01]

Hey Bill thank you very much! I try my best! Hope your well?

[@aristidescastillo8089]

Wonderful repair excellent detailed job

[@dentremover01]

Thank you Aristides

[@mrgrumpy5116]

nice job, not an easy one to get rid of, thank you for the video,

[@dentremover01]

Hi Mr Grumpy, thank you very much for your comment and very happy you enjoyed it. Yes it was a bad one to do but it came out great I suprised myself! Take care, Martin

[@MrGarywells]

Thanku 4 this upload...i hope it helps your business as much as it helps me!!

[@dentremover01]

Hi Gary my pleasure thanks for your kind words

[@gergemall]

Thank you. Love your channel.

[@dentremover01]

Thank you JON

[@nikpatel16]

Excellent clean repair!

[@dentremover01]

Thanks Nik!

[@shakeelshaft6714]

Very nice work and impressive job.

[@dentremover01]

Hi Shakeel thank you for your comment and for watching 👍🏻

[@eltongoddard4710]

Stunning repair 👍

[@dentremover01]

Thanks Elton

[@andysdentrepairs5148]

Great video mate and perfect repair as always 👌

[@dentremover01]

Thank you very much Andy !

[@jonskjefte7870]

Amazing job...fascinating to watch. Jon from Minneapolis, MN

[@dentremover01]

Thank you Jon! Really pleased you enjoyed the video repair

[@davidholzbaugh652]

Great repair. Great job!

[@rimfixer]

Outstanding work Martin saving this one to my pdr play list its that good .

[@dentremover01]

That’s great ha thanks!! Very happy I could entertain! Take care Martin

[@kamilkobel1051]

Outstanding job!

[@dentremover01]

Thank you Kobel 👍🏻

[@wmccourtney2814]

Great work!

[@dentremover01]

Thank you 🙏

[@victorbarranca2910]

Outstanding job, thanks for sharing,

[@dentremover01]

No problem at all thanks for watching

[@tridentpdrltd1506]

As always, smashing it out the park on skill & content. 🙌

[@dentremover01]

Thanks Ben @TriDENT PDR 🇬🇧

[@paulwoods5195]

Amazing work matewell done💪🏼💪🏼👍🏻

[@ferpa771]

it was top, congratulations 🙂👏👏

[@dentremover01]

Thank you Fernando 👍🏻

[@brianakers9606]

Excellent work, Man. Very impressive. Loved the final result but I couldn't help but be bothered by the poor condition of the paint. Hopefully the car owner kept their appointment with you and had the car detailed. I'm sure that was a tedious job.

[@bigfoottoo2841]

Awesome job, good work..

[@osamaalmustafa3405]

Great job buddy 👌💪

[@dentremover01]

Thank you Osama 😊

[@salahelahmar6151]

Awesome repair

[@bobthesnobscotland2821]

great work and thanks for the good detail much appreciated cheers

[@dentremover01]

Thank you very much Bob 👍🏻

[@sajidmahmood3668]

Wonderful job

[@gastonmarcelo3648]

Muy buen trabajo 👍!

[@dentremover01]

Thanks Gaston!

[@andyrazzell1080]

1st class 👌

[@dentremover01]

Thanks Andy!

[@gjebox]

Well done video... the question when your using the pushing tool in the video how do protect the hole from paint damage or bending the hole as you creating levage at the hole opening

[@timwest9300]

Great job I love it

[@vgotishan3234]

Great job!

[@evojay76]

Great job mate

[@dentremover01]

Thanks Jay 😊👍🏻

[@guilhermeferreira1392]

Guilherme de São Paulo Brasil acompanho todos os seus vídeos meus parabéns

[@Normalhowaboutyou]

Pretty cool. I like the tool. Have to remove some dents. Including a simple in a Downtube where the seat post fits in

[@dentremover01]

I wish you good luck with your repair

[@dent-clublondon]

Great video 🙋

[@cooper1114]

Wow.. great!! I had same experience this body line of bonnet but failed because the dentl didn't pull out any more with glue pulling..so, I used rod.through underneath hole but make high mark because of strong area. Anyway you are really great for PDR technician. One question.. how long do you take a time to fix it perfectly? I geuss you spent over 5 hours.. isn't it? Thank you

[@dentremover01]

Hi Cooper Jeon thank you for your message and glad you liked the vid! Yes it took about 5 hours! Every dent is different though so don’t let it put you off trying another repair like this..... I agree those bonnets are super tough! Thanks for watching and take care Martin

[@ianbaker3819]

Absolutely fantastic video, you are amazing the best pdr instructional video I have watched. Do you offer courses if so I would book for sure

[@mvasquez6667]

Nice job.

[@dentremover01]

Thank you 🙏

[@raymonddignon399]

great job!!!!!

[@dentremover01]

Thanks Raymond

[@bruffy69kb]

Amazing repair, can't believe you managed that especially being aluminium?? Stunning result 👌, can I ask what you are using too release glue is it acetone based?

[@pinplume]

Très propre !! Bravo monsieur ! Combien de temps avez-vous passé dans cette bosse ? Amicalement

[@harunozdogan8023]

great work thanks

[@allenwilson6585]

Great job as usual. Thanks for the video! Do you think this could have gone faster or worse with a collision glue with a long ice tab right on the body line with a bridge puller? Its a lot to pull, but with access to the sides to work the crowns, I was wondering how that would work out. Aluminum is so difficult to work. Thanks again!!!

[@dentremover01]

Thanks Allen and great question. I’m sure that would also be a great repair option, possible add a crease tab and som cam auto flex glue right on the bodyline under constant tension, then repair both sides of the bodyline? I’m sure that would work

[@allenwilson6585]

@@dentremover01 thanks. if I get one of those on aluminum I will try it. Aluminum is sooooo difficult.

[@dentremover01]

Certainly is

[@markgoscinski3509]

yet again an unbelievable great repair ,but with the years of skill and experience you have ,i do not see how a 1 week PDR course can possibly teach you what you need in the circumstances you find yourself in with some very complex dents , i don't think i'll bother trying to do this via intensive training as i just don't see how you can gain the skills in a week .Another great skillful video ,brilliant :-)

[@dentremover01]

Hi Mark thanks for your comment. Yes this dent is a tricky one to do and you need all the experience to do these successfully Look at online trainers like Real World PDR, dent trainer and Learn PDR online... all these will give you the basics to practice and progress from there Thanks for watching Take care, martin

[@INAGODAVIDA]

Thank you very much for sharing your expertise. My question is, when using the Heat Gun, at what temperature is good to be able to make the Aluminium pliable to work with ? And should it be maintained at that temperature also ?

[@calogerotravail6749]

thank you very much, respect

[@dentremover01]

Thank you I really appreciate your comment

[@enderbalkan]

Amazing 🙏

[@dentremover01]

Thanks Ender 👍🏻😊

[@user-oe1zd4qy5l]

Can you please tell me what type of glue sticks you use and also what spray for removing the glue left on car , thanks

[@tonydownes7424]

Amazing work did you fabricate hat inspection light or do you sell them

[@deanmacheenify]

Amazing finished product sir. How long did that repair take you?

[@tonythomas2094]

Respect.

[@dentremover01]

Hi Everyone, Im proud to show you my next repair video… If your a new Technician or interested in how PDR works then you need to watch this! If your a potential customer wanting to see how I operate then you need to watch this video! I really hope you enjoy this 30 minute how to! Thank You Martin

[@EugenMutabor]

Really Nece Repair

[@dentremover01]

Thank you Zybin

[@thomascooper193]

Approximately how much was that repair thank you

[@Дениснефтерев-л1х]

good job 👍

[@dentremover01]

Thank you 👍🏻😊

[@josejose2678]

Good job thx ...

[@dentremover01]

Thank you too!

[@hajarali9330]

Thank you so much ❤️

[@ArtDaBarber619]

Amazing job Martin. Thank you for the tool break down. I will be making purchases soon. What is the cost for a repair like this?