HOW TO GLUE PULL VEHICLE DENTS? | See How Its Done! | By Martin Sadler

HOW TO FIX CAR DENTS WITH GLUE.
I hope you enjoy this "step by step" style video...
The damage was caused by a roadside collision as the Golf was parked up, another vehicle had driven too close to it and impacted the rear side creating this very noticeable crease damage.
Our customer really didn’t want to have any paint removed from the damaged area to pull the damage out, any filler or paintwork and had done research on other repair methods such as Paintless Dent Removal and found us online.
He contacted us online and through a number of calls and emails a date was set for the repair. The repair was going to be a “best possible” or a “push to paint” meaning I’d repair it as far as I could but there maybe ripples, areas which wouldn’t fully repair or the paint may come away due to glue pulling this hard!
The repair took around 16 hours to complete starting off with some strong glue pulls along the middle of the main dent, working towards the front of the car, then working back from the other direction to the rear, the rear dent took a good few hours to straighten! And then working towards the front the rest of the damage was carefully lifted out.
This repair was done only by using Hot glue methods or GPR (Glue Pull Repair) using various tools and accessories, and a lot of coffee and patience. I’d say the end results look amazing and as we’d sold this repair as a possible “push to paint” our customer is very happy not to have the side painted at all now…..
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 Introduction
01:03 The damage explained
03:22 Set up for glue pulling
04:51 The first pull
07:37 Let's take a look at the progress so far
10:39 Picking out the tight creases
13:33 Repairing the second dent
19:32 Repairing the top bodyline dent
22:45 Repairing the third dent
24:15 Repairing the forth dent
27:35 Wrapping up the video
28:00 Before and after shots
29:03 End screen
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
#GluePullingTower #DentRemoverBeverley #PaintlessDentRemoval #camautopro #camautoprouk #EastSide #pdr #ThoseDentGuys #DentRepair #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler #kecoUK

[@lionelmouries1984]

Hi Martin, I'm a beginner dent removal in France. I came across your videos, and I think they're all great. I like the bump analysis you always do at the beginning of the video. And your work is top notch, Continue if you can, to make us great videos. And hello from France

[@dentremover01]

Hi Lionel thank you for your great comment and congratulations on your PDR journey. I really hope you’re enjoying learning and I hope my videos help if you get stuck. I appreciate your feedback on the dent Analysis and I do try to explain every repair I do for you all to understand it Best of luck Martin

[@dentremover01]

Wow I’m really looking forward to showing you this repair, and hear your thoughts. I hope you enjoy it and if your a new dent technician it would be great to hear your feedback

[@andrewboggis3174]

Came out, that’s talent not just tools..👍🏼

[@dentremover01]

Thank you Andrew

[@1st_track_dents]

Top job Martin! Super clean result. I used the Cam Auto glue sticks for the first time yesterday on that deep dented Polo rear arch we spoke about and was super impressed with how well they stuck! I reckon I could have pulled the arch off the car! 😂Joking aside it pulled it out perfectly, so a very happy customer. 😎

[@dentremover01]

Hey Jake thanks for commenting and that’s super! You got to use that CamAuto glue it really sticks like the preverbal! Are you going to be seeing this VW repair on KZbin soon? Take care and looking forward to your next video 🙌🏼

[@1st_track_dents]

@@dentremover01 Hey Martin, I didn't film this one enough to make a video from it as it was a bit of a test, will hopefully film the next one, all the best! 👍

[@dentremover01]

Hi Jake super ! Atleast you fixed it!

[@randallpowell721]

I learned something today how to get that reverse crease out of the wheel arch. I imagine the theory hold, same for the edge of a door, bring the edge back to the correct level, and then pull away from the crease or the out side crease to straighten out the wheel arch incredible.

[@dentremover01]

Thanks again Randall it’s great to hear that my content and repairs are helping you 🙌🏼 il keep making the vids and put as much of my knowledge into them so you can pick those golden nuggets and help you with your repairs

[@randallpowell721]

@@dentremover01 thanks for the content you produce super helpful! Good enrichment

[@dentdetailpdr]

Incredible repair Martin! Massive job and excellent result!

[@dentremover01]

Thank you Graham! 🙌🏼

[@wilsonng7464]

oh boy that's a lot of work and time-consuming but it's well worth it👍

[@dentremover01]

Tell me about it lol! Thanks for watching and commenting !

[@24cimbo]

Great repair again! I started in December last year..going very slowly at the moment.And only just realised I live very close to you..about 25min drive😀

[@dentremover01]

Hi, congrats starting your PDR journey. If you want any days here for any extra training your welcome to get intouch Thanks Martin

[@24cimbo]

@@dentremover01 thats amazing!Thank you for the offer.I will contact you if I need any help.Much appriciated

[@dingking7577]

Hello Martin! It’s fun watching this after we just had breakfast together. Hope the rest of your trip goes great!

[@dentremover01]

Thanks Tommy it was a pleasure to meet you both, we had a really good time and was great getting to know you both and also talk about Dents (With a beer!)

[@LearnPDROnline]

Great video Martin, lots of detail and good information here and a great repair, it takes dedication to stay on a repair like this until its completed. Awesome...

[@thefunkyt]

Incredible job! That dent was all over the place and you broke it down and attacked each area, thanks for sharing!!! Great video editing too!

[@dentremover01]

Hi Hoosier Dent Repair thank you 🙌🏼 yea it was a bit of a mangled panel wasn’t it!! Larger dents I always try to section the repair. Seems to help

[@mustangbelly1]

Genius, just love watching your vids mate.

[@dentremover01]

Thanks Kevin I really appreciate you watching and enjoying my vids 🙌🏼

[@MrSiViF]

Loved it mate, finally had time to watch this. Many thanks for the long edits and amazing video entertainment! Also look after yourself in the coming UK heat wave.

[@keymad4]

Another perfect job carried out by Martin.

[@dentremover01]

Thank you for your kind words Keymad4 🙌🏼

[@jot2895]

One of the best PDR video content on KZbin...keep up the great work!!

[@dentremover01]

Hi Jo wow thank you I really appreciate your comment it means a lot

[@SalvageMasterEssex]

That was a difficult repair but finished result is excellent 👍👍

[@dentremover01]

Thank you Corey 🙌🏼

[@cmb1972]

skilled dude.

[@dentremover01]

Thank you CMB

[@tonycash8544]

That is impressive

[@dentremover01]

Thank you Tony

[@victorbarranca2910]

I must have missed this one, glad I found it. Another fantastic job, thanks.

[@dentremover01]

Thank you Victor for your support 🙌🏼

[@jonelick5887]

Master of your craft fo sho👍🏻🖤🔥🖤

[@dentremover01]

Thank you very much Jonelick

[@dingking7577]

Very cool editing through the introduction Martin❤

[@dentremover01]

Thanks Tommy haha! This time next week 🍺🍺

[@tridentpdrltd1506]

Awesome mate. Massive asset to the industry & keeping the education strong 🤟 #dentsquad

[@dentremover01]

Thanks Ben! Really appreciate your kind words and likewise your content on your channel and socials is weapons grade! #dentsquad #thosedentguys

[@DentZero123]

Outstanding work

[@dentremover01]

Thank you 🙌🏼

[@khimsophacarfixing]

Thanks for your sharing knowledge 👍

[@ashperlumbag65]

Sensie! Maybe you need some workshop denters out there... im a panel beater from Philippines... Love your videos im learning a lot from it. Theres nowhere to buy those PDR tools here...Thanks so much

[@dentremover01]

Hi Ashper thanks for your comment. Are you able to make some tools to get you started? I don’t know anywhere who sells either I’m sorry

[@thrustmeister]

Another nice job completed, good work Martin👍

[@gkltpcalculator]

Nice Work sir

[@alimehrdadi7416]

Good job 👏🏻 ❤ thank you for video

[@billramsey800]

Hard day at the office Martin but a great reward at the end. I think you're lower back must be quite sore after that. 🇬🇧👍

[@dentremover01]

Hey Bill! Yes a very tough day! But like you say the end results where great! My back isn’t too bad at the moment mainly down to having the ramp, I don’t usually have to strain to repair cars unlike when o was mobile I’d be crawling on the floor Take care for now Bill! 🙌🏼

[@martinlouden9005]

Excellent result Martin.

[@dentremover01]

Thanks Martin

[@dingking7577]

Great job on this repair. 🙌👏🙌👏🙌👏

[@dentremover01]

Thanks mate!!

[@andyrazzell1080]

1st Class as usual Martin 👌

[@dentremover01]

Thank you Andy!

[@user-nu2up2hq9b]

Спасибо братан! Красавчик! Мне бы к тебе на обучение.... 👍👍👍

[@dentremover01]

Thank you! Not training at the moment. Are you wanting beginner or advanced?

[@user-nu2up2hq9b]

@@dentremover01 я только наблюдаю, пока, не знаю с чего начать, оборудование, дорогое,я из России

[@nedcramdon1306]

Excellent videography!! Excellent skills!!

[@dentremover01]

Wow thank you Ned I really appreciate your feedback and comment 🙌🏼

[@mrgrumpy5116]

nice job

[@dentremover01]

Thanks !

[@simonebusselli1717]

Sei un grande Ottimo lavoro 👍👍👍👍👍

[@dentremover01]

Thank you Simone 🙌🏼

[@tyleradcock5493]

Beast man been really thinking abt getting into pdr work I’m a painter for a collision shop at the moment just looking for a change an healthier option

[@maniyaa_]

Great Video!

[@dentremover01]

Thank you Marley!

[@dentremover01]

Thank you Marley!

[@jetsetjoey]

You said it took "hours" to fix. HOW MANY hours??? Excellent Job & fantabulous presentation, BTW...

[@dentremover01]

Thank you! I think this took about 8-10 hours to complete

[@akierum]

@@dentremover01 Price for such repair? New front wing part cost is 50Eur

[@dentremover01]

@akierum errrr. It’s a rear 1/4 panel?? These don’t bolt on

[@akierum]

@@dentremover01 Rear wing panels are mostly rusted so owners are happy to reweld them, repaint.

[@dentremover01]

@akierum I see your point but. This repair and the repairs that I carry out are on newish or very well maintained vehicles where the customers don’t want filler or paint. It’s a big world out there and there’s many skills and techniques for repairing vehicles. If you find it easy to rip off a panel, weld it on and fill it, prime and paint it cheaper than a PDR technician then that’s your skill/technique and I’d love to see you do it on KZbin one day 🙌🏼

[@antaomanuel1617]

Parabéns 👏🏼👏🏼 Em quanto tempo você fez esse trabalho?

[@MrNickstevenson63]

Your skillset is very high. That was certainly not a candidate for a junior tech. Great work! Love those yellow tabs. Where might someone purchase them?

[@r.c.850]

Hello there.... I like your videos..... Do you have a video explaining the type of glue and level of strength? ...

[@dentremover01]

Hi RC thanks for your comment. I don’t think I have that exact vid but I do know there’s others on YT if you search for that type of video

[@lh-wx8vu]

장비 노하우굿~~

[@massimo6770]

Excellent result, your usual very high standard. There is a fact that manufacturers are careful not to communicate and that is the thickness of the used sheets. Recently, here in my part, there was a rather strong hailstorm. In general, the cars (all fairly recent) have suffered medium / severe damage. My wife's 1998 Polo, only two dents and not even deep ... Can you tell me something about the modern metal sheets used? are they really more delicate? only you can give us this kind of information! Thanx a lot.

[@shahrokhahadi383]

درود خدمت مارتین دوست عزیز

[@dentremover01]

Hi! Thank you for commenting and watching

[@raymondsokn4108]

Nice video`s you make 🙂 Can you link to tools you use? And to Pull Glue Tabs you use? And type of glue?

[@billseay6399]

Hey how do you know which metal you are working with

[@ianallen5405]

Great video Martin 💯👏🏻. Just about to get into PDR myself. What's the rough price you charged for that. Just a ball park figure. Cheers. Keep up the videos

[@BatfinksWings]

Great work! I have a dent in a similar position to "B" on my week old brand new car and no local PDR guy will touch it. I'm having to put it into bodyshop for a fill and respray 😭

[@dentremover01]

Hi Batfink, sorry to hear are you in the uk ?

[@BatfinksWings]

@@dentremover01 Hi, yeah I'm in Scotland. Had 3 PDR guys look at it and they all said they couldn't do anything with it. To my untrained eye it looks small and easy to do but I don't know 🤷

[@dentremover01]

Your welcome to send me images, www.dent-remover.co.uk

[@BatfinksWings]

@@dentremover01 That would be great. Ill send them over. From your videos mine looks like nothing!

[@NewmanAutomotive]

Just found you on here Martin, excellent work as ever, keep it up mate. Thankfully I've not suffered any dents for a while since you did my last one on the ZS EV a year and a half back. Current car is aluminium, how's that to work with? Best regards, Paul.

[@dentremover01]

Hi Paul thanks for your message and thanks for watching! Aluminium is fine to repair it’s just slightly different to work with. Harder to dent too so you should be fine! Take care Martin

[@DentZero123]

Well Martin I really like those crease tabs where did you get those again

[@dentremover01]

Thanks Bobby! The yellow crease tabs are by Cam Auto and they are indestructible!

[@daviddickmeyer5231]

I would love to know how much this actually cost.

[@lysdexic9129]

what would look good is if you took a still picture every so often with no tabs attached and only using the inspection board and then time-lapse all those pictures together, it would be an effective way of showing the progress with respect to body line damage and dents etc. you could see how the bars change as you progress. Each picture should be taken from the same location with respect to the damage. Cheers.

[@awaddabit2398]

Good morning Martin, Fantastic job as per normal. The name of the glue and strength type. Do you recommend Line board verse fog? Thanks

[@dentremover01]

Thank you and sorry for the delay. I use all types of glue but the best and strongest is Camauto collision glue or Keco Flex (same glue) it’s a beast. Also I prefer lines, but on big jobs I use fog as I can see more- lines to finish off

[@awaddabit2398]

Good morning Martin, All good I appreciate you getting back to me. Have a great day.

[@racheat]

I've got dents coming out my ears as I get the pleasure of maintaining three cars, one of which driven by teenagers. I've already learned bumper cover repair/prime/paint. Can you recommend a brand of kit to search for that wouldn't be terrible being sold as "used"? Thank you! From salty upstate New York

[@dentremover01]

Sorry for the late reply. There’s cheaper kits on Amazon, Aliexpress but the proper tools will work better Try Anson PDR tools in 🇺🇸

[@Droningonuk]

Excelemt work what would this repair cost?

[@andrewboggis3174]

Nice, did you consider having a pulling beam with a fixed upright then using small ratchet straps so as you can get multiple pulls at once?

[@dentremover01]

Hi Andrew yes I’ve got a few ideas to modify my pulling tower to enable multiple pulls. Like the guy from Elevation dents here’s a link to his bid and it’s great kzbin.info/www/bejne/gnOWeHuKqL91p6c

[@andrewboggis3174]

@@dentremover01 thanks for that👍🏼 I’m currently welding up a ridged pulling tower that I can drop in and twist for our korek grid system at work. Height adjustable with also a drop on parallel bar for door/van body lines. Not sure on them winch’s thought think they would need a finer cog on then for more control.?

[@geofab3281]

What is the purpose of tapping it and what does it do? In what area do you do the tapping?

[@narseh123]

You did a fantastic glue pulling job. I wonder if push rods could have saved you some hours by pushing the dents from behind instead of pulling them.

[@dentremover01]

Thank you and yes your 100% right. On the VW Golfs there’s grommets where you can use bars. I glued this for the video Thanks For watching

[@robsdeviceunknown]

Ok what sort of wizardry is this? I guess the saddest takeaway for me is, just how CHEAPLY these newer vehicles are made. All my work involves older vehicles. So yeah, gunna subscribe and check out other videos maybe you can teach a old dog new tricks. Thanks bud.

[@dentremover01]

Hey Rob thanks! Yes the metal varies and some males are very cheaply made and others (usually German) are very well made Thanks for subscribing I hope you enjoy my content 🙌🏼

[@MTLJack]

Could you please share what's the name of the pull tower you have used please? does it come with the hydraulic jack kit? Thank you!!!

[@dentremover01]

Hi Jack. I made it myself. If you go on my channel I show you how I made it. All the measurements etc

[@dentremover01]

Hi Jack. I made it myself. If you go on my channel I show you how I made it. All the measurements etc

[@Francedsp.]

Hi Martin really great vidéo thanks for this ! CAN you tell me what’s the name of your Glue on this vidéo ? She is amazing strong ! 💪🏼 thanks for answer friend

[@dentremover01]

Thank you Cam auto/Flex glue From most PDR outlets

[@Francedsp.]

Thanks 👍🏻👍🏻

[@cynt1111]

How do you have that kind of patience, the mini grinder would have been out within 30 minutes😁

[@michaeldee777]

What is the diameter of the glue sticks that you use?

[@tyleradcock5493]

What lights do you use brotha ?? Amazing work man

[@dentremover01]

Thank you Tyler! I’m using an Elim a dent light. It’s a 20” version with 6 leds and an auto sucker. I think they are about £600 +vat 🤷🏻‍♂️ but we’ll worth it

[@tyleradcock5493]

@@dentremover01 thank you so much man for the info and the reply !

[@colinhamer6506]

great videos could you possibly add a minimised second camera view in a corner of the screen 👍

[@dentremover01]

Hi Colin. Thanks for your comment. Yes I sure can. For what reason or what else would you like to see?

[@colinhamer6506]

@@dentremover01 you often switch between a close side on view to a stepped back view when starting pulling etc it might make it easier to understand what is happening being able to see more angels at the same time and as for what else I'd like to see I don't know how you could do it and work comfortable at the same time but it would be amazing to see it from your view 👍👍👍

[@artegaragemartelinho5588]

Hello. Please, where did you buy the battery adapter support that fixes on the pedestal. I mean the piece that is on the pedestal, allowing the use of the luminaire in two ways.

[@dentremover01]

Hi Arte, please can you explain a bit more or give me a time stamp on the video so I can see what it is? Thanks Martin

[@artegaragemartelinho5588]

@@dentremover01 15:27 of the video. Adaptation support on the pedestal. I have a lamp (stand and makita battery). I would like to adapt it on the pedestal too, just like yours. Thanks for listening.

[@dentremover01]

Thanks. So the pole was an old washing line pole, which happened to fit, the adapter which holds the lamp, battery and fits the pole is called a Medusa and it’s made by Elim-a-dent So google this and it should pop up. I just checked KecoUK and it’s £120+vat Hope this helps 🙌🏼

[@artegaragemartelinho5588]

@@dentremover01 Thank you very much for your attention and information... I wish much success... Sorry for the English, I'm Brazilian and I used google translator in the messages kkkk. Strong hug...

[@dentremover01]

My pleasure. Take care of yourself and have a great 2023

[@emceesuegga2037]

What is the name of the glue and the tool you use to pull, I woupd like to buy them here in SA. Any recommendations?

[@dentremover01]

Hi. Thanks for your comment. The glue and tabs are from CamAuto and you can order them from CanautoPro they are in Canada Thanks Martin

[@1973Aj]

Hi Martin, mega job again mate 💯 👌🏻. been looking for ages to find Cro carb knock down, any emailed them today , they’ve stopped making them a while ago an no intention of making any more , which I find crazy . Anyway going to make my own. I think dimensions is 25/26mm diameter, and around 100mm length? What is actual if you could check also leather tip diameter Kind regards Andy

[@dentremover01]

Hi Andy thanks! The screw tip cro carbs are available from Keco. That would do you??

[@1973Aj]

@@dentremover01 it’s the knock down you have the nylon one , I have a 10mm leather knock down which is ok for small stuff

[@dentremover01]

Yes I know, but they have a screw tip version which is the main bit you want, but without the big long white body. So if you have a spare KD or even get some nylon rod the same thickness and tap it - you have the CroCarb!!

[@1973Aj]

@@dentremover01 yeah I see that thing which is for a hammer the leather part is bonded onto nylon, could you tell me the dimensions of your one pleaseee ?

[@dentremover01]

I can do but it would be Monday as I’m away from home at the moment. Il see what I can do for yohb

[@user-op3wf3rm5t]

💪👍

[@dentremover01]

Thank you 🙌🏼

[@razaqureshi5538]

If you have a id which could i also share some repairing videos to u which i also doing this work in Pakistan❤️❤️PDR ☺️

[@dentremover01]

Hi Raza thanks for your message. Sending vids through my email may slow it down and stop my customers sharing their damage with us. Your welcome share through Facebook and tag me in them? Maybe “PDR Beginners” as I’m on there a lot

[@luigibonada8308]

,👍

[@user-us7sp9ks3u]

Sizden sıcak ve soğuk silikon nasıl sipariş verebilirim ? Türkiye

[@dentremover01]

Please Google PDR Glue and you’ll find shops online. That’s the best thing to don

[@mdentrepair]

Lost my cro carb...

[@jonkore2024]

I tried it ...it doesn't work

[@dentremover01]

Hi John sorry to hear, keep at it and you’ll learn one day. I can’t play a guitar but…

[@shahrokhahadi383]

زیرنویس فارسی نمیشود😢

[@dentremover01]

I’m so sorry. Il take a look. Farsi? Any other language?

[@rbtgaming6504]

16 hours to pull a bodyline dent my god....its a dent not rocket science

[@dentremover01]

Thanks RBT yes to get this right it took a while. I was paid for my time and our customer didn’t want to have it painted 🫠