TOP 3 PDR Tools For Beginners - Don’t Buy PDR Tools Until You Watch This 😮

[@javanis5151]

man I needed this video two years ago, I admit I made ALL those mistakes, bought thousand of dollars worth of tools before I could fix a dent properly. Took all sorts of online training courses including Dent Trainer where I learned the most and watched hundreds of videos and practiced on old hoods and even my own cars. Come to find out its 1000 times harder to learn PDR than I thought. I would say its difficult enough that 8 out of 10 people will give up within a few weeks. I didn't give up, I kept practicing until I learned enough to work on other peoples cars. One of the reasons I did not give up was cause I spent so much money on tools, there was no backing out. Thank You for educating the people out there so they will not make the same mistake I made.

[@denttime]

Wow that's great! Im very glad DentTrainer.com has helped you a lot Javani! Perseverance always wins!

[@JustmeJoy7]

Do you feel sticking it out was worth it? Are you an Independent PDR person or you work for a company?

[@stephen1774]

I’m buying a 100 dollar Amazon kit , if I don’t have the skill with that, it’s not meant to be.

[@scientist100]

@@stephen1774 so, what happened?

[@Isaiah-ft5nx]

Thanks for this! I do collision repair, but I want to dabble with PDR to try and maximize my productivity. It’s also a great place to practice because I can fix my PDR screw ups!

[@denttime]

Try to learn from my other platform called denttrainer.com thanks.

[@keithlanning7381]

Hello thanks for the good info.i am looking to learn PDR after 40 years in body work and see how i can do

[@grandsea2]

Dyslexic...here for you Myke...on a serious note my Mom got a door ding on her Buick between the handle and the edge of the drivers door. She hasn't noticed yet, but I bought a Mini lifter and a tap down, used a crease tab and glassed it...all from watching: you, Chris, and a few others! Thank you and the others for the great content! To be honest I got very lucky, control pulled twice and the third time pulled hard with some grey tab weld. Only had to tap down a bit of the center of the now slightly high crease and a bit on a small crown. It was pretty shallow even compared to some of your day one dent video dents...but either way I have the itch now to continue my pursuit! Thank you again for the taste of knowing what can be done...

[@denttime]

Yes! You are right. I am Dyslexic. That's awesome. Glad you are having awesome success!

[@redsunsmr284]

I'm going to approach learning PDR with my own car. Got an MR2 turbo that's got millions of dings and dents. Going to identify which dents I wants to tackle then get the right tool for it. Hope to hone my skill as I go.

[@dumptonpark]

Thanks my son is just starting luckily he hasn't bought any tools yet so I will send him in your direction. 🍰☕🙂

[@Terrywaites]

Thank you for this video man just straight up honest advice. Ill buy exactly what you said as I head down the learning curve.

[@denttime]

Awesome. Glad I could help.

[@finaltouchautodetailingllc]

Thanks for making the video, I'm looking to add this type of service to my business. Trying to learn all I can before I make any purchases like you stated in the video.

[@denttime]

Glad it was helpful!

[@TheWesleyRicardo]

Thanks for the wealth of knowledge in this video!!

[@denttime]

Glad it was helpful!

[@idcray8572]

I like this great information .. keep it simple Thank you 👍

[@denttime]

Glad you liked it

[@zhuazhupapapa]

Hi, Mike, I'm from China and I really want to buy some very practical dent repair tools. I've been following your work for a long time. You are a very great dent repair master.

[@denttime]

Thanks! I have added the links now. Appreciate your support!

[@dallasshotwell1274]

Thank you sir. Going to the website now

[@CarlosLopez-tt5py]

Great video ,I m always learning from you. Keep up the good work and make a lot of money.

[@denttime]

Glad to hear it and thank you!

[@billseay6399]

Hey thanks again big help

[@denttime]

No problem 👍 thanks for watching

[@phillipmemmott8860]

The first stripped white black reflector/light you showed where can you get that? Thanks for the video and suggestion.

[@pdrprojectspaintlessdentre8323]

Hi Myke great video, great tool advice and great guy😀

[@denttime]

Thanks 👍

[@mr.iforgot3062]

You saved me a lot of money. I'm that guy who totally gets into their newest hobby and buys all the expensive shit. Only to burn myself out. It's fun, I learn ALOT, but have I have these tools and no place to keep them. I pay so much in storage fees, I could buy a property. Maybe. Tools and women. I spend my money on the two.

[@dannyshannon9103]

Hey man!! I'm just getting into this and wanted to say thanks. Informative!

[@denttime]

You’re welcome. 😉

[@paulonditi1316]

Hi am in Kenya 🇰🇪 and we don’t have those tools here and I would like to have those tools and learn how to use them as a side hustle

[@ST-cy6we]

How about a quick list from you in the description of the must have tools, a light recommendation and anything else needed for the first job?

[@ХабибБибип-б4б]

Hi,buy A1 tools and first time you no have problem)

[@denttime]

I made a 10 ten pdr tool and better oones on denttrainer.com don't forget to use discount code: denttime at checkout

[@southfloridadents4363]

Thanks Myke great video and informative as always.

[@denttime]

Glad you enjoyed it. Thanks Nelson!

[@나의무룡산]

Hi Myke, greetings from Korea ulsan city. Thanks great video, great tools and wish to buy everything rods tool ~~~

[@denttime]

Thanks for watching! I want to visit Korea some day! Love the food! 👍

[@simonerossi2185]

Hi Myke…greetings from Italy.

[@denttime]

Hello there!

[@frankperolli7627]

Thanks Mike, great video.

[@denttime]

You bet. Glad you enjoyed it. 👍

[@jejejei274]

For the soft tip tool, wouldn't it be better to get a 36 inch rather than a 24 inch to reach more areas? Awesome video. Thanks.

[@denttime]

Thanks for the comment. However that length will be too long. I recommend a tool length that can be versatile for door access and fenders. You can always purchase an extension as well but the whole point is to have a tool right in the middle. Using too long of tools will limit your access points and become unusable for half the panels. Thanks again

[@taylrteix]

Great video!

[@vado08]

Nice video Mike

[@denttime]

Thank you!

[@Swenser]

Surely 1 rod enough. Adjustable length, interchangeable tips.

[@mykeeX13]

You recommend the 24” double bend soft tip tool. Which one 7/16”, 3/8”, or 1/2” rod?

[@denttime]

7/16

[@jf5154]

Good content

[@Techisol]

I do not want to pdr for a living but i just want to fix my own car. All These tools can get very expensive. Please recommend some tools for diy'ers that have little budget. Like $150 budget. Preferably something i can find off amazon. Thank you so much for all your videos.

[@denttime]

Hi thanks for watching. Unfortunately PDR isn’t easy to learn. Before you buy tools you should consider denttrainer.com first. Second it is cheaper for you to hire a professional than do it yourself. Unless you don’t care about the results, quality or just being frustrated. You won’t be able to find good tools for a $150 budget. That’s just not reality. Now you can find eBay tools but they are going to give you opposite results and frustrate you at the very least. They will either break or have too much flex. You need to watch good structured videos on. Denttrainer.com as I mentioned many times. So many DIYers want to buy tools before they know how to use them she just waste time and emotion. Save yourself at least some of the heartache and listen to my advice. Thank you.

[@Daniel-mp6jv]

my man is saying is so true, every review you see on amazon say the rods have too much flex and just bench ​@@denttime what

[@mangosmakemesmilee5164]

Do you have any videos on fixing the roof portion that’s above the windshield/connecting the A-pillars on a soft top convertible? Not sure what to call this portion on a convertible that the soft top roof attaches to, but am trying to find information on fixing some hail dents in the limited work space.

[@mikemarco6579]

What percentage of dent can I fix with the tools you recommend would you say I could do 80 percent of the work with them or less I own a used car lot need to do some repairs on my own vehicles what to do some of the easy stuff on my own and get a professional for the more difficult stuff

[@cynt1111]

these are the 1st 3 tools i made from 10mm stainless.

[@adrienbastarache8096]

Why the small window Mike

[@Fransitch]

Hello sir. What do you suggest for knock down tools starting off?

[@denttime]

Ansonpdr.com dead dent tips and VIPtools.com

[@najigatavi8719]

Hi mate This toll you mansion for us where can buy, how much is cost. Tanks

[@loriet.1236]

I'm interested in starting, what lengths for the last 2 tools? 24 inch?

[@oldsoul1291]

I want to make this as a side job

[@NYKgjl10]

Good morning Mike. I was wondering which tools do you recommend for the top rail passenger side door?? Thank you in advance....Gerald

[@denttime]

I recommend a slide hammer, variety of glue tabs like keco, dent reaper, black plague and tequila tabs along with some hawg glue.

[@CentralMonsters-r2y]

Were can i get them tool to buy

[@dmc8103]

Do the same tips that fit the knockdown fit in that double bend adjustable rod?

[@denttime]

They do!

[@dmc8103]

I'm torn between ordering 😫 the 24 or 30 inch double bend from Anson. I'm thinking more for door use. What do you think 🤔?

[@denttime]

Get the 24 because it’s perfect for door use and fenders. Not too long.

[@jeffdeluca1153]

Do these tools all use the same interchangeable handle? Is itna ratchet?

[@denttime]

Depends what brand but each company has their own removable handle or a fixed handle.

[@JorgeOrtiz-qy2wr]

Hi Myke, greetings from Mexico City, I've been following you for a while! Thank you for the recommendations. I want to train online, can you provide me with your link. I want to buy the 3 tools that you recommend here but from Anson, what sizes are appropriate? I want to use tactical handles, which one would be the right one to start with? Thanks again

[@denttime]

Yes check description now. It's up! Thank you.

[@aneudysperalta6300]

I have 2005 BMW 545i my wife backed into a slanted tree and put a huge dent on the very corner right side of the trunk. How can I sent you pics for advice.

[@denttime]

My advice is don’t try this on your own. If you think a professional is expensive wait until you do it yourself

[@juliocordova518]

Hi

[@TherapeuticRage]

I got a question mike. What are those red snap rails organizing your rods in your box?

[@denttime]

Those are called loop holders for screw drivers and other tools. From Snap On

[@TherapeuticRage]

@@denttime Thanks! I appreciate it.

[@ghostwarhammer007]

😎newguy here

[@tallerautosrueda2756]

Quiero aprender pdr

[@ХабибБибип-б4б]

Tools is nothing, Experience is everything.

[@denttime]

80/20 but from experience.. pdr tools make it easier if you know how to use them.

[@ХабибБибип-б4б]

@@denttime easy and faster ) you wraith.

[@robertrienbolt8523]

Yes this is Robert Rienbolt I'm not sure if you still have what I sent before but I would like to know if you could shoot me another text so I can send 5he pics of the Dents I want you to look at so I might be able to get some kind of a quote you already sent a text with what I needed to do about taking the photos and text and send them to you but my grandson erased all my messages so I'm really sorry about this but I really want a quote on around about figure so I would really appreciate it again if you can send me the information I need to get this text and photos to you again sorry for the confusion and you having to send it again thank you for your time and help.Nightwolf....

[@DeeJayKayzSince1996]

it is ok for explanation. but most of us need straight forward tips on how to use the tools as DIY and not to listen to talk too much. just want to know how straight forward. no tips that make us feel tipsy. just tell how you use the tools. it is boring otherwise cause need to fast forward in what you try to already explained. hmmm, I wait to long. I think I gonna fast forward in what you try to share here. it feels boring though cause you not try to teach us, you are selling the tools.

[@denttime]

I’m giving you “Free” advice and you’re complaining? 😆

[@cryptojedii]

Goofy video