Derestrict 2022 Turbo Levo Mastermind TCU - Levociraptor Gen 2 Install - Adjustable Up To 72km/h

[@EpiceBikes]

Chips and More Information Available Here epicebikes.com.au/product-category/specialized-unlocks/

[@boblatkey7160]

4000 miles on my derestricted Levo, and using the BLEVO app, and loving it! When I pop off the trail and have to head home on 15 miles of pavement I'm cruising along at about 26 mph! I can pedal up to 33 miles an hour before my cadence is too high. If I see a group of road bikes ahead of me I put it in turbo and pounce on them and blow by them and they cannot catch me! That is so fun!

[@charlenec.1177]

I just installed a gen3 on my ‘22 levo and think it sucks. I can’t even get to 24mph without being out of breath…

[@benriding8678]

Fix for the cadence is to get a larger front sprocket like two teeth. I can pedal my 2018 Levo 50+ mph once I went up two teeth up front.

[@charlenec.1177]

36t chainring arrives tomorrow..

[@markbailey6758]

How is it working now with the larger chainring@@charlenec.1177?

[@jimji2774]

Easiest install yet with no dropping the motor is going to be very attractive to many people especially those with lower speed restrictions than in the US. So easy but it sure would be nice to see your accurate speed when riding.

[@andirock6504]

Cool - sorry for asking: is it working with the new Mastermind TCU [the one with the display]; what about the updates over the air by Specialized; any problems? I am thinking of the turbo leov 2022

[@Magic_Vince]

Do all Levoceraptor 2 modules work on 2022 Levos? I see many advertised as 2018-2021 only.

[@תקשורתיטבתה]

hi - if i am discconect the chip,and going to the dealer for a bike check.the dealer connect computer to the bike - will they see in the log anything about connecting a chip ?

[@evilldead6824]

Is there anyway u can make an updated video with the Gen 3 Levociraptor and explain the procedure on how to restore setting to factory when u have to take bike in for warranty work. Also does just disconnecting the module reset the bike? This is really the only channel on KZbin that goes in-depth with this product and that's not in Italian lol

[@EpiceBikes]

Yes we will be releasing a video on the Gen 3 within the next couple of weeks.

[@patrolmaverick]

Does it affect the bike's odometer reading? My Levo is only 2 weeks old, so I don't want to be clocking up more km's than it's actually doing.

[@tocjo]

how do you reset the TCU ? for service

[@drivingnirvana5164]

Awesome product; can this unlock the walk assist to work at any speed? Would love to be able to boost power over gnarly terrain to avoid pedal strokes….

[@tambinono]

I just got my bike yesterday and i was thinking about that. Can you do that by making the walk assist on the app 100%?

[@sasharazifard]

Best instructional videos ever! Thank you

[@anusbefurworter6410]

Wow, such a good video !!! Thank you very much 👍👍👍👍👍👍

[@ktech4246]

Thanks for the video seems like easy install. Question though can you have small jumps in the speed limit? Only want to get up to 32km/hr (ie US restriction).

[@EpiceBikes]

There is 5 Speed settings 25, 29, 43, 58 & 72

[@mtnmnkymilitia]

Can mission control app detect this and transmit the hack to specialized? Current bike is a 2022 levo. The reason im asking is specialized denied a warranty claim on my 2019 kenevo because they spied on my bike via mission control and saw that i had changed the wheel size (on Blevo) Anyone?

[@painter107]

Hello do u need to on and off, then on every time you ride, or just after the first install. Tnx

[@EpiceBikes]

Just need to set the speed the first time

[@FerdinandBuenaflorAton]

How do you reset your creo SL to factory setting after removing the levociraptor?

[@Beef0121do1]

Does this work with the 2023 comp carbon (its comes with the tcu in the picture and not the led)

[@EpiceBikes]

Yes, However for correct speed and distance values the new version of the chip is also available here epicebikes.com.au/product/pre-order-levociraptor-gen3-suit-levo-kenevo-levo-sl-creo-sl-vado-sl-2019-2023/

[@KoiMonster]

Hai do you plan to also integrate alarm into the device?

[@ErnandoBressan]

This process works with a Vado SL 4.0 2021?

[@brokenlegz]

Help! I’ve followed instructions on removing it to reset it to factory but it’s not working speed and distance is still wrong. When it says remove “TCU and set to 0” does that mean unplug the tcu?

[@EpiceBikes]

You need to set the speed back to 25km/h before removing the chip. Then afterwards reset the TCU

[@javiercolon2274]

Hi! I know that gen 1 works with Levo 2019 but that version comes without display. This TCU version works with 2019 Turbo Levo or only 2022 models?

[@EpiceBikes]

This version works with both 2019 and 2022 models

[@wildblueangel100]

I have read that the Blevo can’t not connect anymore to the new 22 Tcu Specialized has cut out third party connection,so will the levoceraptor still work?

[@EpiceBikes]

The Levociraptor gen 2 works with the 2022 model. The Bluetooth connection is directly to the Levociraptor module. So the speed can be adjusted via the Levociraptor app and should also be possible to adjust via the BLEvo app. The BLEvo app won't be able to connect with the mastermind TCU so the additional BLEvo features will not be possible on 2022 models.

[@CA-cv6bs]

For Gen3 there is a max speed of 38 kmh when derestricting, correct?

[@EpiceBikes]

For the the 2022 models The Levociraptor gen 1 Max speed is 37.5km/h Levociraptor Gen 2 will achieve up to 57.5km/h Depending on firmware versions

[@CA-cv6bs]

@@EpiceBikes So, what is possible with a TL Gen3 (latest firmware) and the Levociraptor Gen2 - 37,5 or 57,5 kmh?

[@EpiceBikes]

@@CA-cv6bs Gen 3 Levo up to 58km/h with Levociraptor Gen 2

[@johnh-h9j]

THIS IS A REALLY COOL PRODUCT HOWEVER, I MUST ASK ABOUT THE ELEPHANT IN THE ROOM.... BASED ON THE ABSENCE OF REPLIES TO CERTAIN QUESTIONS BELOW I TAKE IT THE FOLLOWING IS TRUE. IF NOT PLEASE CORRECT ME. 1. THE ODOMETER WILL NOT RESISTER CORRECTLY OR WILL NOT RECORD AT ALL. 2. ONCE THE LEVOCIRAPTOR IS CONNECTED AND USED THE SPECIALIZED MOTHERSHIP WILL SOON BE AWARE AND THE MANUFACTURER WARRANTY WILL BE VOIDED. IF EITHER OF THE ABOVE IS INCORRECT PLEASE REPLY.

[@EpiceBikes]

1. Speedometer / Odometer readings would no longer be correct. 2. Most people that remove the device get warranty, if a dealer is suspicious and really digs into the diagnostic data they can determine it could have been chipped due to anomalies in the logged data such as average KM travelled per battery charge which would be artificially low.

[@iancharless]

Does doing this void warranty?

[@TalariaDawg]

Yes

[@andreykvital]

What's that suspension? Can you share the link to it? It's a 260mm?

[@sprucelodge]

Has this any impact on the motor causing further problems ?

[@EpiceBikes]

This does not cause any motor problems

[@thewrx2600]

no, it just removes an artificial limitation on the bike, the battery, tcu, and motor are only capable of so many watts of power, they are just getting rid of the wheel speed fault that kills power once it hits a certain rpm. (over simplified, but essentially the tldr)

[@ioannisparaskevopoulos1120]

Will derestriction affect battery consumption-life during riding in trail and turbo modes?

[@EpiceBikes]

Your battery will drain faster but you will also be travelling faster so the range is not reduced by too much. You would notice the most drain from high speed open road riding.

[@Nzi.16]

Hi i just got a 2020 turbo levo sl comp. Can i know which Levociraptor should i get?

[@EpiceBikes]

This one for a 2020 Turbo Levo SL 2020 turbo levo sl epicebikes.com.au/product/levociraptor-gen-2-suits-levo-2019-2021-kenevo-2020-2021-levo-sl-creo-sl-vado-sl/

[@mdlphotography8449]

I have a Levociraptor that I bought for my Levo Turbo 2020 in February 2020. I have just purchased the new 2023 Levo Comp Carbon but I have been told that it will "brick" the bike if I install my Levociraptor. I currently have the following FW Versions Battery - 4.6.6, Motor - 8.1.5, Display 3D.E.0 . Can you confirm if this is correct or if it can be installed without causing a problem?

[@ryanh4533]

Have you tried it yet👀

[@mdlphotography8449]

@@ryanh4533 unfortunately not yet as I have a broken foot. Still going to be a few weeks before I can get onto my bike. Do you also have one?

[@thehungrytaurus5010]

hello i need help i hooked the levociraptor gen 2 to my 2020 levo sl. turned it on and off a more than 2 times. and i did the reset with it on and without it. connected both levociraptor app and blevo. and disconnecting mission control.. but the bike still feels restricted and tops out at 20mph. i just cant seem to figure it out..

[@EpiceBikes]

Hi Mate, The SL is quite low powered so it's hard to get much faster then 35-40km/h. Email us for specific help if you feel it is limited. In Boost it should be obvious by the noise if the motor is cutting out and no longer providing assistance.

[@kschuler919]

I can scan and find using the Levociraptor app, but the Levociraptor does not show on the BLEvo app of the screen with Bike Setup, Bike Monitor and Configuration? Is it still connected even though it does not show? Thanks

[@EpiceBikes]

You need to go into configuration. Then Bluetooth/ant device. Then click the scan for Levociraptor button. Once it has found the Levociraptor it should display on the home screen.

[@kimmonuortila5640]

Hi. Levo -19 and Levociraptor gen1. After maintenance firmware 0.6.6, hardware 3.1 and TCU 3.064 (36.B). Looks/geels like Levociraptor is no more compatible… Is it so? Do i need gen2/gen3 or is this now mission impossible?

[@EpiceBikes]

If you don't have the mastermind TCU then a gen 2 chip should work they are currently compatible with the latest firmware on the blue led based TCU's

[@andrewjackson4016]

Can the manufacturer detect that this has been used or if the speed restriction has been compromised if you take it off at a later date?

[@EpiceBikes]

Once the Levociraptor is removed the bike is returned to standard settings and the speed restriction is not detected

[@fathertime209]

@@EpiceBikes you said the speed restriction is not detected, but don’t you mean that the previous compromising of the speed restriction cannot be detected? Thanks…

[@ricardossantos4198]

with the gen3 buy with old tcu, is possible to calibrate the speed ?

[@EpiceBikes]

Yes levociraptor works on both the new and old TCU

[@Dodilev]

Hi there can i use it on my turbo vado sl4 ?

[@EpiceBikes]

If your bike has the TCU mounted in the top tube the Gen 2 Levociraptor will be compatible

[@Photoshopuzr]

just asking but do you guys have this for the specialized tero 6.0 and the levo carbon farmes?

[@EpiceBikes]

Check this out for specialized bikes without the TCU kzbin.info/www/bejne/jnLHf6WGZdWerqc

[@reggiea.3487]

Do I need to download the BLevo app to configure my 2022 Kenevo SL settings or can I just get the free Levociraptor app?

[@EpiceBikes]

Levociraptor app is currently only available on Android

[@dag681]

Does this app and levocipaptor unlock the top speed on the new 2022 Kenevo?

[@EpiceBikes]

Yes works on the 2022 Kenevo

[@reggiesmith3514]

Where can you purchase the part needed??

[@EpiceBikes]

epicebikes.com.au/product-category/specialized-unlocks/

[@alcwm]

how does this work for the turbo tero 3.0 2023 ?

[@EpiceBikes]

Hi Mate, This video shows chip installation for Turbo Tero kzbin.info/www/bejne/jnLHf6WGZdWerqcsi=90jcIzQkxX4KTX3R

[@Sandyamp]

Hey, I have the new specialized turbo Vado 5.0 2022 how do I derestrict it please?

[@EpiceBikes]

You can unlock your Vado the same as the keneveo in this video

[@Sandyamp]

@@EpiceBikes thanks but the TCU is not on the frame it’s on the handle bar.

[@EpiceBikes]

@@Sandyamp Unfortunately we do not have a chip that works for that setup at the moment.

[@tektako]

How about on the Vado 3.0 2022 model?

[@EpiceBikes]

Does not suit models without the TCU in the top tube

[@thewrx2600]

speed restrictions are dumb, and should be restricted by power input by rider, can't imagine those poor fools in Euro having to deal with a a 15mph cutoff, my grandma rides faster than that on her analog bike. How often does the levoraptor get updated, and is that something I can do from my phone? Also, what is the latest motor, tcu, firmware version that is supported with the new tcu and old tcu? Or can you point me towards a man page that would tell me please?

[@EpiceBikes]

Currently compatible with the latest software and bikes, Updates are infrequent and optional in general, Updates are performed through Levociraptor App or Blevo App

[@Shauny808]

Does this work on 2022 Kenevo SL?

[@EpiceBikes]

Yes also works on Kenevo SL

[@dag681]

@@EpiceBikes The Kenevo SL seems to be a real dog in rolling terrain, as it doesn’t have to torque the regular Brose motors have. I imagine that even though top speed is derestricted that there is no way for the torque issue to be fixed?

[@EpiceBikes]

@@dag681 The SL motor has only 30nm of torque compared to the 90nm in the standard motor. There is no way to make up that difference.

[@Shauny808]

@@EpiceBikes once removed there is no way of knowing it was ever installed?

[@EpiceBikes]

​@@Shauny808 Many people have removed and got warranty. However we cannot say for certain as things are always changing.

[@mentorsspain]

work on firmware 8.1.5? thx

[@mikemiller4011]

Where can I buy the chip?

[@EpiceBikes]

epicebikes.com.au/product/levociraptor-gen-2-suits-levo-2019-2021-kenevo-2020-2021-levo-sl-creo-sl-vado-sl/

[@benriding8678]

You stated at 4:30 in the video that if you have the Mastermind TCU that it won't no longer show accurate info? Is there a way to correct that? Thank you.

[@EpiceBikes]

Yes, Levociraptor Generation 3 is now available and maintains correct speed on mastermind TCU epicebikes.com.au/product/pre-order-levociraptor-gen3-suit-levo-kenevo-levo-sl-creo-sl-vado-sl-2019-2023/

[@benriding8678]

@@EpiceBikes figures! Just my luck and happens to me often damn it! I buy something then as soon as I receive it a newer improved version comes out. Every single time with most products I buy, oh well. Thank you and excellent video my friend!

[@thewhizzler1914]

hey, does the blevo app still work?

[@EpiceBikes]

Yes

[@thewrx2600]

so how does this work after the 32.b 8.1 update??

[@TheWhiteTarzanS100]

Would this work on levo turbo alloy 2022

[@EpiceBikes]

Works on any specialized bike that has a TCU in the top tube like the bike in the Video. The 2022 Turbo Levo should have a Compatible TCU.

[@robertkrysik100]

does the display show the real speed or not?

[@EpiceBikes]

With the latest version of the chip speed is correct epicebikes.com.au/product/pre-order-levociraptor-gen3-suit-levo-kenevo-levo-sl-creo-sl-vado-sl-2019-2023/

[@TheRatkovsky]

Too quick, not clear how to use and what to do in Blevo.. I am sorry but this is video not for beginner as I am. It not happens very often that I do not understand instruction but this... anyway thank for this because is better than nothing.

[@Mgtowfreedom]

How much

[@EpiceBikes]

epicebikes.com.au/product/levociraptor-gen-2-suits-levo-2019-2021-kenevo-2020-2021-levo-sl-creo-sl-vado-sl/

[@trex3215]

Please do you know if the Levociraptor Gen2 work for turbo levo camp alloy?