Desert Eagle FULL Disassembly

[@TheRifleman3006]

I own a Desert Eagle and this is the most informative and competent video I've seen about the disassembly of this firearm. I am looking forward to more videos from IWastexI on the assembly of this firearm and videos on other firearms. Kudos to you for such a great video.

[@IWestexI]

Glad I could help. I'll have to release the reassembly video.

[@GuidefothaBedevilled]

+IWestexI Yes, please do!!!

[@InertiaCreeps]

Same here! Living in Florida though (where the air is basically water) EVERYTHING rusts so a full tear down annually is necessary to make sure nothing is rusting anywhere in the gun. Can be annoying to do with all of my firearms, but I remind myself that it’s good practice.

[@komandantekomandante7466]

​@@InertiaCreeps Eso es igual que tener muchas novias, debes atender a todas.

[@InertiaCreeps]

@@komandantekomandante7466 FACT! Been there done that. Multiple women are not for the faint of heart (or for those with a light wallet) 😂

[@InertiaCreeps]

Thanks for the full break down AND actually using words and not just ASMRing with your hands only.

[@IWestexI]

Thanks for the feedback. I know what you mean.

[@VanOVon]

Your video my friend is amazing I got a dessert eagle from alloy empire. It’s scaled down to 1/2 of the size of a real dessert eagle and is more so like 40% of the size of a real dessert eagle but that’s just for clarification. One of the pins got stuck in it after a weird jam as the people who sent the product seemed like everything wasn’t tightened enough and I had to 100% disassemble it and have almost fixed the issue. I’m in Canada btw. The thing of talking about doesn’t shoot and is more of a collectible and your vid saved me. I was so sad as it was so awesome to play with it and get a feeling of freedom even if it’s only me having fun. Hate Canada’s gun laws so much. Thanks again for the vid it helped so much.

[@IWestexI]

@@VanOVon I'm glad the video helped. I'm sorry to hear about the crummy gun laws in Canada. Once your voters dump Trudeau, hopefully some gun rights will be established.

[@broot1375]

The more of these pistol disassembly videos i watch...the more I love my 1911. I would love to have an eagle tho for sure

[@Ultramarine40]

Best full strip video I have seen, needed to replace faulty polymer spring on extractor and this video made it easy.

[@IWestexI]

Thanks for the kind words. Glad to help.

[@ownerfate]

My Desert Eagle is coming in a few days, so this will defiantly help, thank you.

[@IWestexI]

Glad to hear and I hope you safely enjoy your new DE. Feel free to reach out to me if you have any questions.

[@ownerfate]

@@IWestexI Will do.

[@MrJoshcc600]

Thanks. My extractor spring wore down to a nub and i just replaced it. Took 3 months to get the part so i forgot the orientation and your video helped.

[@IWestexI]

Josh, check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helps during your reassembly. Subscribe if you like these videos.

[@damon323]

Dude!! That was genius on using the spent shell to remove the ejector!! Thank you so much for your time and effort for making this video!!👍👍👍

[@IWestexI]

@@damon323 Thanks and glad to help!

[@damon323]

Wish I could send you a donation/tip! Best detailed and professional video by far on KZbin!

[@IWestexI]

@@damon323 Well thanks. Your kind words are plenty of a tip.

[@nonyabusiness1776]

Great video, thanks a bunch for uploading this! Had to remove my slide stop to shave it down so my offhand wasn't constantly activating it while shooting and this video was a huge help.

[@IWestexI]

You're very welcome. I had the same problem.

[@GuidefothaBedevilled]

Please do more Desert Eagle videos! Yours are The Best!!!

[@IWestexI]

check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU

[@richosburn]

Very generous posting this for others. It really helped. Thanks very much.

[@IWestexI]

You're welcome. Thanks for the kind comment.

[@richosburn]

Be well and I’ll be sure to sub. Cheers!

[@fatkhetburnell]

Thank you! Best DE video on youtube.

[@IWestexI]

You're very welcome. Glad I could help.

[@Everything2A]

@@IWestexI yeah this helped me out tremendously I just got a stainless steel desert eagle and I disassembled it so that way I could send it off for mirror polishing. Unfortunately they required me to send it fully disassembled. Thankfully I found your video!

[@IWestexI]

You're welcome

[@bjorker40]

Very impressive...hoping I never have to go that far for a repair in either of my 44mag or 50 ! Lol

[@IWestexI]

Grimm Day well if you ever do, you know where to go :)

[@我在這裡]

Desert Eagle is my favorite pistol, ty for this dissassemly

[@bensollman8882]

Awesome video. Only thing I really needed as well was the mag release removal.

[@IWestexI]

Thanks for the kind words. I go over the mag release in my assembly video. I hope that helps.

[@rohanclapham2913]

What about the removal of the magazine release?

[@howardlevine9304]

just use a 1/8 punch and drive it out from the side that looks like a screw. its no screw its just a split that will close to let it release

[@IWestexI]

Sorry for not including it in the disassembly. My reassembly has it though. kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped

[@hardlylivin6602]

I noticed when you removed the hammer pin at 10:40 it seemed to have a slight bend in it. After seeing that, I went ahead and removed mine and sure enough it also has a slight bend in it. Is that normal? And do you think it should be replaced after a certain number of rounds?

[@IWestexI]

Your pin will be fine with a slight bend in it. It's a roll pin which is hollow and less ridged than a solid pin. Once your hammer pin is installed, everything is tightened up and solid. I would only replace it if you notice any hairline cracks in it. If you want, you could get some solid pin stock and cut and file your own pin. Thanks for the question. Let me know if this helps or if there is anything else I can help you with.

[@fedup4908]

How does the mag release come out? Everything else very thorough and helpful.

[@IWestexI]

The mag release button is a split pin. You can either hammer it out hard or you can get a special tool for it.

[@340Captain]

Perfect, that helps me with your close up look camera !

[@IWestexI]

Thanks for the compliment. I have lots of close-ups in my newest video.

[@jerrybowers2119]

What do you do when the slide barrel takedown lever doenst budge?

[@IWestexI]

@@jerrybowers2119is it not rotating?

[@sircake9498]

how did you loosen the grip screws? any screwdriver i tried just seems to deform/damage them

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼………………………………Excellent video, Thank You!!

[@BreezyLoveMachine]

Dont even own a desert eagle but this was still very informative

[@IWestexI]

Check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU Subscribe if you like these videos.

[@DrQuagmire1]

@@IWestexI hey man, i'm planning on owning a Desert Eagle, possibly for my 41st birthday this year as both a collector's item and to occasionally take it to a gun range. And is completely disassembling the gun the best way to clean it as well, or just for when you have to completely replace a part?

[@IWestexI]

Thanks for your question. No need to fully disassemble the people for general cleaning and maintenance. Just a field strip will do for that. Thanks for watching my video and enjoy your DE when you get it. Early Happy birthday to you.

[@DrQuagmire1]

@@IWestexI thanx man!!!!

[@ramonfigeras7632]

If I remove the two springs or springs from the slide, is it possible to fire with a 357 magnum ammo reload with the wancuter or semi wancuter lead bullet, with or without copper cover?

[@SC57Hunter]

Hey man You should never fire lead Bullets in your DE. Only copper coated bullets Thats because of the gasoperated design of the DE. In the barrel of the DE is a little hole (gasport) which will fill up with lead when you shoot wadcutters etc. And your gun wont cycle anymore which will repuier a really hard cleaning session.

[@IWestexI]

Ramon, please do not alter your recoil springs and PLEASE do not fire your Desert Eagle without the recoil springs installed.

[@TreeOfLifeCG]

So i can only assume to put it back together, just follow this in reverse order? I stripped mine down for Cerakote , obviously i didn't take apart the hammer and such.

[@IWestexI]

Thanks for the comment. Short answer is yes, in reverse. There are some techniques to putting certain parts back in. Hopefully in the future I will have an opportunity to make a reassembly video.

[@TreeOfLifeCG]

@@IWestexI I'd let you do it on mine but i have no idea where you're located lol.

[@IWestexI]

@@TreeOfLifeCG I'm an FFL. If you would like me to reassemble it for you, I'll do it for free. I can email you a copy of my FFL and you can send it to me.

[@TreeOfLifeCG]

@@IWestexI I'll be honest I'm going to put it together myself for a trip I have coming up, but when I get back I'm down to send it to you to make an assembly video with. 🤷‍♂️

[@TreeOfLifeCG]

@@IWestexI okay scratch that, cerakote is going to take a week, whenever you're ready I can give you my email and I'll send it to you when I get it back man.

[@vironpayne3405]

But can you reassemble it blindfolded?

[@991turbogeek]

Excellent video! One question though, I may have missed it but did you go over the removal of the trigger bar from the trigger? I was told cutting it off with a small Dremel rotary was the easiest since a new pin is only about $0.50 but wanted to know if you crushed the flared side in and reflared it or had some other trick. I thought you had excellent tips! Thanks.

[@joebar6305]

Will you ever do a reassembly of it all?

[@IWestexI]

Joe Bar Next time a customer brings me another DE, I will.

[@Learn.The.Hardway]

@@IWestexI been a while?

[@GuidefothaBedevilled]

The one thing I needed to see most was the complete disassembly of the trigger. Could you show me how or do another video and include this? Thanks

[@IWestexI]

the trigger is connected to the trigger bar with a rivet. you will have to drill the head off the rivet and punch out the rest.

[@GuidefothaBedevilled]

+IWestexI Thank you!

[@GuidefothaBedevilled]

+IWestexI Please do more Desert Eagle reviews! You are the most knowledgeable and professional reviewer on KZbin!! Thank you!!!

[@johnnyrothschild8538]

Did u show how to disassemble mag release?

[@IWestexI]

No but I showed how to install it in my assembly video. Check it out.

[@luckeypolishing]

Now this is a real disassembly 👌

[@abbey787]

don't s'pose you know how to remove the mag catch assembly? I'm a bit stuck there. is it a split pin design? it's different to a 1911 style.

[@IWestexI]

Zane G yes it is a split pin design.

[@abbey787]

Thank you

[@That1Violist]

I can’t get the recoil spring out, it’s stuck and I’m not sure how to get it out

[@IWestexI]

I've not experienced the recoil spring getting stuck. Can you explain more how it's stuck?

[@That1Violist]

@@IWestexI it’s hard to explain without it a picture but I can twist it and it nothing will happen I’ve looked into it with a flashlight and I don’t see a way I can get it out

[@IWestexI]

@@That1Violist It is unusual for the recoil spring to be stuck into the frame. I'm sure this is frustrating. I'm hesitant to give advice on how to fix this without seeing it. Do you have a local gunsmith you can take it to?

[@That1Violist]

@@IWestexI no but I luckily figured out that I have a different model and the model I have won’t let me take it out. But thank you for the help, I appreciate dearly

[@IWestexI]

@@That1Violist if you are still having trouble let me know.

[@ramonfigeras7632]

hello, I want to modify the gun of the eagle 357 to fire in central fire competition, and make a refill of less strong ammunition with semiwancuter lead tips for precision shooting, do you think it is possible?

[@IWestexI]

I would not recommend modifying your Desert Eagle outside of the manufacturer's specs. check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@Ajibica117]

I'm having trouble with the the safeties, any suggestions?

[@IWestexI]

what's the specific problem?

[@Ajibica117]

IWestexI the left side is so tight it won't even budge, I tried a few tricks and soaked it in ballistol but it's locked on. I'm even damaging the screw head.

[@IWestexI]

+Nathan Frisque As a gunsmith it's difficult for me to determine the problem without having your gun in front of me. When a screw is locked in place, the problem could be a number of things. Im not going to give you any suggestions on removing the screw because you could damage the safety or the slide and that might not fix it anyways. I recommend you take it to a gunsmith. The cost to have that screw removed is cheap not to mention the money saved on damaging the safety. My suggestion will save you time and money, trust me.

[@Ajibica117]

I have the drum outside the slide, so the slide is safe

[@IWestexI]

+Nathan Frisque Oh I see. Try letting it soak in a cup of Break Free. Let it soak for a solid 24 hours. Then use the correct size screwdriver bit to back it out. Put the safety assembly back in the slide so the slide can hold the safety in place to allow the screw to be backed out.

[@Ajibica117]

Magazine release?

[@IWestexI]

Very observant. The magazine release requires a special tool for removal. I didn't have this tool at the time nor the supplies to make my own.

[@Ajibica117]

of all the things I want to modify the mag release is one of the first, so where do i get said tool. I cant find any desert eagle mag removal tool info.

[@IWestexI]

+Nathan Frisque Make your own tool. Pinch the pins head together closing the gap. Then push the pin through the frame.

[@Ajibica117]

so would attaching a larger surface area head to the release cause a problem.

[@IWestexI]

+Nathan Frisque can you rephrase your question with more detail?

[@christopherochoa1446]

Amazing job! Thank you!!

[@IWestexI]

You're welcome

[@kgb4194]

Is it possible to get to gas port?

[@IWestexI]

No. It's closed off by the manufacturer.

[@kgb4194]

@@IWestexI so anyway to clean it?

[@IWestexI]

@@kgb4194 look into the barrel and you will see the gas port opening. You might be able to feed a pipe cleaner down there. I've never tried because it doesn't need to be cleaned unless a known obstruction gets in there.

[@kgb4194]

@@IWestexI I am just asking for future references. I understand that using lead ammo can clog it up.

[@buzzydj]

What in the hell was Magnum Research thinking when they decided to make the extractor spring out of polymer? Are there any alternative or after market springs to replace this instead of buying new OEM part?

[@IWestexI]

buzzydj not that I'm aware. It was designed this way. It works well.

[@buzzydj]

I agree that it works well. Unfortunately mines didn't last very long. I don't even think I put close to 1000 rounds through it, but once I removed the extractor the polymer spring was crumbs. Anyhow, thanks for the upload.

[@MrJoshcc600]

I just replaced mine as well. Wore down to a flat nub. I'm surprised it worked at all (although only manually using the slide). I'm not positive but i think i have around 600 through her mostly hand loaded. They say that some gun cleaning solvents can dissolve it slowly and There is a metal aftermarket one but i have no experience with it.

[@robertdaone]

Didn't get a change to watch the entire video but what are the parts that they recommend replacing after about 1500 rounds? Great, informative video so far!

[@DrQuagmire1]

I think it's mostly the recoil, magazine, and firing pin springs, as they tend to wear out the fastest (especially if you use the Desert Eagle more frequently). You could also replace the entire bolt and hammer with a brand new one, especially if one isn't a trained gunsmith and don't wanna run the risk of accidentally damaging the individual parts.

[@JM-hx1xi]

Great video. Very informative

[@IWestexI]

check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped

[@joebar6305]

Awesome! Now I can properly cerakote my new DE44W.

[@IWestexI]

Joe, check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU This should help you put it back together. I hope this helped.

[@MrSterling314]

I am having a hell of a time trying to remove the mag release... it seems like it should be easy. Any ideas?

[@IWestexI]

it comes off like a 1911 mag release.

[@MrSterling314]

So I have heard, but this was way different. I finally figured it out after a lot of staring at it. Turns out its a split pin design, and I dunno about you, but in the 3 years of gunsmithing, I have never seen a 1911 mag release that worked like that! Must be a difference in the model or something.

[@IWestexI]

The newest model Desert Eagles have the split pin design. The older and more common Desert Eagles are designed after the 1911 turn style mag release.

[@GeorgeCowsert]

I really hope someone makes a 9mm or 45acp deagle just so people can compare it to non-magnum pistols. Field stripping is far simpler and less fiddly than with other pistols, and I can genuinely see militaries using the deagle if it weren't so heavy.

[@InertiaCreeps]

Magnum Research now makes .357, and I believe either .40 cal or .45 or possibly all three. They look *Spectacular* and shed quite a bit of weight with built in muzzle breaks and smaller rounds.

[@DrQuagmire1]

@@InertiaCreeps bullshit, they outta make a Desert Eagle chambered in 10mm!!!!! now THAT will catch my interest

[@InertiaCreeps]

@@DrQuagmire1 Bullshit? Which part exactly? And oh yes. 10mm? sign me up! It’s like .40 but more expensive and harder to find!!!

[@DrQuagmire1]

@@InertiaCreeps exactly!!!! now whether or not the guys at Magnum Research will actually make a Desert Eagle chambered in 10mm remains to be seen. but if Sig Sauer can come out with the new P320 X-TEN, Glock having 10mm's of their own, as well as Ruger and Smith-&-Wesson, then Magnum Research shouldn't have any problems drawing up plans to make a Desert Eagle chambered in 10mm (since they have some M1911's chambered in the same caliber)

[@13ktostay]

Fantastic video, if it's not too much trouble could you list the tools and sizes I would need to do a complete re and re on my .44 DE that is coming this week....i would appreciate it so much....

[@IWestexI]

jim g Flathead screwdriver, Wheeler punch set, and a disassembly block.

[@13ktostay]

thanks got all the tools, in the punch set can you tell me the smallest punch needed for the disassembly, just so I know if I picked up the right ones...thanks once again

[@CecilXzandu]

So the magazine catch pin is just driven out then?

[@IWestexI]

Brian Monroe it's a split pin.

[@CecilXzandu]

I'm sorry but I do not know what that means.

[@IWestexI]

Brian Monroe there's several comments below about it

[@CecilXzandu]

I just ended up driving it out. I used a copper rod that I had. Worked perfectly.

[@nikitaserbienko99]

Please tell me the Size of magazine from desert eagle length, width and height

[@IWestexI]

Nikita, I might have a magazine disassembly video on the way. In the meantime check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@PapaJoJ]

Not common to see a full disassembly, kudos to you. Would you happen to know a cause of the slide catch lever hitting the barrel on discharge causing the slide to remain open with a full mag? I already know its not the way I fire because I can sort of ''limp wrist'' one handed and the slide will complete a full cycle usually, but typically 2 handed shooting the lever hits the slide, keeping my hands away from the lever. I'm thinking the slide catch assembly is loose, much like the ambidextrous safety comes loose after firing ( fixed with thread fastener) . I notice I can push in and out my slide catch just a few hairs, is that normal? or should it be hugging the frame? Im thinking of putting some loctite on the circular part that goes in to the frame so it is in direct contact with it, so it holds in place when I'm firing. That wouldnt negatively affect the trigger or have any adverse effects on the frame?

[@IWestexI]

I had the same problem. The cause is, believe it or not, the recoil throwing your thumb up into the slide catch locking the slide to the rear. Try this, when grasping the frame with your firing hand, point your thumb downward and completely cover your thumb with your non firing hand pinning it to the frame. It's basically the same grip as when holding a 1911 but you are pinning your firing hands thumb to the frame so it won't move.

[@PapaJoJ]

IWestexI Its been so long since I last fired my DE but iirc I made sure to fire in ways that would not allow my hands to come in contact with the slide lever and it still locked back. I put some loctite on the circular part of the lever that goes in the frame, which will hopefully be enough to hold it in place properly during discharge. I believe the particular problem I have with my DE is just loose parts, like I mentioned before I had to use this stuff for my safety levers as well after putting hundreds of rounds through, the screws became loose and a screwdriver alone wasnt enough to keep them locked in. This truly is a unique pistol and thus requires unique maintenance. Hopefully this will do the trick.

[@Jdogthepim]

Is there no reassembly video?

[@IWestexI]

Annunaki Jew no

[@Jdogthepim]

why? you should make one it would help the few people who have the DE your video is great only I personally have been having trouble with the slide catch assembly and getting the trigger out I was able to get the slide catch spring out but even with putting pressure of the trigger spring the slide catch assembly won't come out. Then there's the question how do i get the slide catch spring back in correctly?

[@Jdogthepim]

I got it the next day thanks for the video its very detailed best one online.

[@leokrupp4442]

Getting that mag release spring back in is a pain.

[@340Captain]

I can't find your reassembly...

[@IWestexI]

Rainer, here you go kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped.

[@ramonfigeras7632]

hello, I want to modify the gun of the eagle 357 to fire in central fire competition, and make a refill of less strong ammunition with semiwancuter lead tips for precision shooting, do you think it is possible? This gun has good precision to shoot at 25 meters in competition, thank you very much. I wait your answer

[@IWestexI]

I think a different pistol might help you better for that type of competition shooting. Check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@Berzrk-Z]

Thank you so much for this!

[@IWestexI]

@Leonard Kelley check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped

[@pourindiesel]

Good video, thanks!

[@IWestexI]

Thank you.

[@chrisw5141]

First 2min for me is enough！ Thanks

[@IWestexI]

Thanks for watching and leaving a comment. The last 16 minutes will be here if you need it in the future. I hope my other videos help you too one day. Consider subscribing, it will help me and you can know when future videos post.

[@MrThidj901]

thank you. really the best around i hope you have many types of guns :)

[@IWestexI]

check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@razzakk]

best video on you tube for this

[@IWestexI]

Michael, check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped.

[@weslemroverson5587]

Top legal bem demonstrativo e bem explicado gostei

[@IWestexI]

check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@1009raclark]

Great video minus the part you forgot on how to take out the mag release

[@IWestexI]

Sorry it wasn't in the disassembly video. It's in my newest reassembly video though kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped Subscribe if you like these videos.

[@budredden818]

Wow great video but so many darn part I still don’t think I could do this and remember how to put it back together

[@IWestexI]

Hey Bud, check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped

[@budredden3855]

IWestexI thanks man

[@AgoristAlex]

Thank you

[@IWestexI]

My pleasure.

[@theanonymousone9668]

Why the fuck are there so many parts????? Thank God I got a 50 cal revolver too. This is ridiculous

[@GMDII]

This concludes disassembly of the frame my ass.. you still have the magazine release button. How do you take that shit out. thats why i watched this.

[@IWestexI]

I apologise for omitting that step. It's a split pin. Hit it hard with a punch and it will pop out. Watch my reassembly video and you can see it up close.

[@GMDII]

@@IWestexI Thanks for the infor. Ive got another problem. Tried taking out the rear sight with RST Gen 4 sight removal tool. the tool broke and the sight is frozen and sticking half way off the gun. any tips?

[@IWestexI]

@@GMDII I'm sorry to hear the tool broke. Mount the slide in a vise and drift the sight out from right to left using a steel punch and a big hammer or small mallet. Don't use a soft hammer like a dead blow. It's a big robust sight, don't be afraid to use some force, it needs it.

[@GMDII]

@@IWestexI I ordered a different tool since this thing wont budge with a standard hammer. If the tool doesnt work ill have to take it to a gunsmith. This is rediculous. shouldnt be frozen.

[@DrQuagmire1]

@@IWestexI finally ordered my Desert Eagle just the other day chambered in .44 Magnum (the .357 & .50AE were out of stock), so it's gonna be badass

[@lulzimhoxha9008]

good bravo

[@IWestexI]

check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@jacksutherland846]

Thanks for the video. It helped a whole lot. Why would anyone want one of these hunks of shit! This thing is ridiculously complicated. There's no godamn way I would ever trust my life to this clown puzzle.

[@imbrium1967]

N 1..

[@IWestexI]

Check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@theanonymousone9668]

Amazing video but WTF? When is there a situation when I would EVER need to do this????

[@MrJoshcc600]

TheAnonymous One if you own one and something breaks... Springs wear out.

[@IWestexI]

check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped

[@muhaiminchoudhury2866]

We have to watch this video in 10x speed!

[@IWestexI]

check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@SouthBoston88]

Where the fuck are the reassembly videos??? Why are there so many disassembly but next to no reassembly? It doesn't make sense that you all show us how to take it apart but not put it back together.

[@CarlosConsorcioCastellanoPerez]

SouthBoston88 Just play it backwards

[@jchrg2336]

Precies werk en draai werk alles , niets mag bezwijken

[@IWestexI]

Did you have a question about the magazine release? If so, it's in my new video. kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped

[@theanonymousone9668]

Ok you lost me at the hammering and dental pick parts. I'm done. This is nothing I will EVER try

[@TreeOfLifeCG]

Well he is a gunsmith so...

[@IWestexI]

TheAnonymous One, maybe my new video will change your mind? Check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.

[@coolhanddruid]

Should retitle this to partial disassembly. "Special tool" needed or not, this isnt "FULL".

[@IWestexI]

You are more than welcome to make your own Desert Eagle Mark XIX disassembly video. :D

[@coolhanddruid]

IWestexI Indeed I could, but that doesn't change the facts.

[@donaldpaintball3]

coolhanddruid I did mine without a "special tool" just basic punches

[@williamstacey1464]

LOL

[@IWestexI]

check out my new reassembly video kzbin.info/www/bejne/fYDHq2mNZ5t8pMU I hope this helped. Subscribe if you like these videos.