Рет қаралды 7,935
How to design radiography and determine joint efficiencies in pressure vessels refer to ASME Section VIII Division 1?
Outline video
- Design of Radiography (Full, Spot, None)
- Marking of Radiography (RT 1, RT 2, RT 3, RT 4)
- Study case of radiography and joint efficiency
Design Radiography
1. Full radiography
- Reference: UW-11(a)
- Requirement: Lethal service, Steam exceeding 350 kPa, welded thickness exceeds 38 mm, welded thickness exceed of list material, specific material as per UHT, ULW, and ULT, using electro gas or electro slag, user requirement
2. Spot Radiography
- Reference: UW-11(b)
3. No Radiography
- Reference: UW-11 (c)
Marking Radiography
- Reference: UG-116
- Type of marking RT 1, RT 2, RT 3 RT 4
- RT 1, vessel satisfies the full radiography requirements of UW-11(a)
- RT 2, vessel satisfies the full radiography requirements of UW-11(a) and apply spot radiography requirements of UW-11(a)(5)(-b)
- RT 3, vessel satisfies the spot radiography requirements of UW-11(b)
- RT 4, part of vessel has satisfied the radiography requirements of UW-11(a) or none of the markings RT 1, RT 2, or RT 3 are applicable
Study case
- Define joint category
- Define joint type
- Define joint efficiency
Source or Reference ASME Section VIII Division 1:
- Figure UW-3 “Illustration of Welded Joint Locations Typical of Categories A, B, C, and D
- Table UW-12 “Maximum Allowable Joints Efficiencies of Welded Joints”
Spreadsheet link: bit.ly/FNEngineeringFile
List of Playlist:
- Full Video (First Edition) : • Full Video (First Edit...
- Pressure Vessel Basic Design : • Pressure Vessel Basic ...
- Pressure Vessels Series : • Pressure Vessels Series
- Shell and Tube Heat Exchangers : • Shell and Tube Heat Ex...
- ASME B31.3 : • ASME B31.3
- Design of Material : • Design of Material
- Shell Calculation : • Shell Calculation
- External Pressure Design Calculation : • External Pressure Desi...
- Thickness Calculation : • Thickness Calculation
- Welded Joints, Radiograhy, Joint Efficiencies : • Welded Joints, Radiogr...
- Type of Pressure Design Calculation : • Types of Pressures Des...
- Nozzles, Reinforcement, Flanges, and Fittings : • Nozzles, Reinforcement...
- Database Series : • Database Series
- Study Cases : • Study Cases
- Question and Answer : • Question and Answer
Tools Riset Keyword: www.tubebuddy.com/titof (affiliate)
** Affiliate disclaimer: some of the above links may be affiliate links, which may generate us a sales commission