I love the contact/transfer paper hack to keep the mat clean. I cut felt for the back of mosaic tiles and it ruined my mat so I love this idea. Thank you 😊
@XsomeoneXelseX2 жыл бұрын
oh the contact paper tip is brilliant. the way felt ruins mats is what's been keeping me from cutting a lot of felt!
@dannabone78763 жыл бұрын
I couldn't be happier. I am sooooo appreciative of you Becky. You are the best, but of course, there is also Jamie! hahaha I think I've told her that she is the best also! Love you both.
@DesignBundles3 жыл бұрын
Thank you so much for the kind words! 😊
@susanvonpein61422 жыл бұрын
I'm a total newbie to Silhouette, or any cutting machine. Your tutorials are great, so easy to understand and follow. Thank you.
@DesignBundles2 жыл бұрын
Glad we could help!
@hferreira6306 ай бұрын
You already know this, but youre incredible. I love your explanations. I love you voice, and you have a way of calming me down when I cant figure this stuff out. I decided to buy a rotary blade to "attempt" a project... 2 things... -For some reason every time I tried to test cut it would shut my software down. I ended up just cutting straight away after the 3rd shut down. -What's the difference between rotary cut and rotary cut edge? I'm looking at the images and can't tell how it would affect the cut.
@flarpster36752 жыл бұрын
I LOVE YOU!!! You saved me from tearing ALL my hair out. THANK YOU, THANK YOU, THANK YOU!!!!!!!
@DesignBundles2 жыл бұрын
Glad we could help!
@e.67503 жыл бұрын
now I will definitely buy a rotary blade. super cute project. thank you so much Becky. it is always nice to see you. virtual hug 🤗
@DesignBundles3 жыл бұрын
Virtual hugs back at you Eden! ---Becky
@sparky109013 жыл бұрын
Ugh. I bought the Curio years back specifically to work with thicker/different materials. I'm SO disappointed that they didn't make a rotary blade for the Curio. 😭
@carlaschrum3 жыл бұрын
once again awesome awesome I could watch your videos allday
@DesignBundles3 жыл бұрын
Yay, I'm glad you're enjoying the videos! :)
@judyblaise16393 жыл бұрын
I wish there was a rotary blade for the cameo 2 and 3. Would loved to do these projects. Thank you
@JeanneSullivanDesign3 жыл бұрын
Very helpful! Did you try a test cut using Wool felt? Or, just the polyester felt? Thank you!
@coleenrosselit79123 жыл бұрын
Thank you Becky!
@DesignBundles3 жыл бұрын
You're welcome :)
@kathymanzo40617 ай бұрын
I have a question about the felt. Do you stabilize the back of your felt first with a product such as Heat and Bond ? I think this was done on fabric to be cut on the Cameo. Another question. Is there a blade adapter for the Cameo 5 ? I just received mine. I upgraded from a Cameo 3. I have so many blades for the 3...rotary, fabric etc. all unopened. I sure would love to use them. Thanks you 🙂
@dianenortness2131 Жыл бұрын
Have you considered using the Cricut Fabric Grip Mat?
@DesignBundles Жыл бұрын
Hi Diane! We didn't have one handy but did you have a great experience with it? - Dawn 🙂
@dianenortness2131 Жыл бұрын
@@DesignBundles I’m going to order and try it out. I’ll let you know.
@DesignBundles Жыл бұрын
Yes, please do! -Brittany
@marie-gaypanigrahi30933 жыл бұрын
Yey so much helpful🥰
@DesignBundles3 жыл бұрын
I'm so glad it was helpful! 😊
@graphosxp3 жыл бұрын
helpful thanks!
@DesignBundles3 жыл бұрын
Glad it helped!
@ddeweypink Жыл бұрын
I am trying to cut felt eyes with lashes the lashes aren’t completely cutting do I increase the force or cut with 2 passes
@veerlewitdouck98318 ай бұрын
Hello, please help me! My programme doesn’t allow me to chose rotary cut or rotary cut edge on the screen after I chose tool 2. It does detect the rotary blade.
@CynnekeSer3 жыл бұрын
What blade would you use for those craft foam sheets?
@LAKatKreations2 жыл бұрын
Thank you for sharing the information on the rotary blade. Questions: Do I need to remove the autoblade first? Also, my rotary blade doesn’t seem to seat down into carriage 2. Is that normal? I appreciate you showing the settings before sending. Is there anything else we need to do to let the machine know we are using carriage 2?
@LAKatKreations2 жыл бұрын
I tried taking the autoblade out if carriage one, but the machine still wants to use it. It will not let me send a job unless I have an action/tool set for carriage 1. I don’t have anything to show where to select carriage 2 when I need to send the job.
@DesignBundles2 жыл бұрын
If you are using the second carriage, you do not need to remove your blade from the first one. When you go to cut you will want to make sure carriage 1 is on a no cut setting and then you can select carriage 2 to cut!
@DesignBundles2 жыл бұрын
@@LAKatKreations When you are under your send menu there should be a No cut, Cut, or cut edge option for carriage 1, you will want to click "no cut" this will prevent it from using carriage 1. Carriage 2 is right below, you may need to click the arrow for it to drop down, but then you can select "cut" for carriage 2 to work. If you still have any questions you can always reach out to customer support at mail@designbundles.net and they will be happy to help!
@LAKatKreations2 жыл бұрын
@@DesignBundles thank you for your response! That’s actually what I ended up doing, and I even had to click on every piece and click on /no cut/ for carriage one. I was surprised I had to do that because I would have thought you could select which tool you wanted to use, and that would be it. My rotary cutter also cut circles inside my fabric. 😬
@DesignBundles2 жыл бұрын
@@LAKatKreations I believe that is supposed to happen when using a rotary blade. The blade needs to make small turn lines in the negative spaces to reposition itself - www.silhouetteschoolblog.com/2021/11/silhouette-rotary-blade-how-to-turn-off.html?fbclid=IwAR0leni7ojQwp-t61Q7rurlcQObAFHUyON71odzGFASDcEQ37yTCds0FFR0
@TheCreativeChica3 жыл бұрын
I loved the project! I still need to try to cut with my rotary blade. Where did you buy the clip?
@DesignBundles3 жыл бұрын
Hey there, glad you enjoyed the video. The car vent clips are from Craft Chameleon, I'll link them for you here. Hope this helps! ---Becky www.craftchameleon.com/products/car-vent-clip-set-of-5?_pos=1&_sid=2879cb5b0&_ss=r&variant=32658750210151
@TheCreativeChica3 жыл бұрын
Thank you 👍
@jenninawesseling65972 жыл бұрын
Hi Becky. I'm trying to cut a felt flower and my cameo 4 does not connect to Carriage 2. I have all the setting correct. I have the rotary blade in carriage 2 but when I send to cut, a pop up tells me my material is not compatible in carriage 1. But I minimized carriage one and opened carriage 2, made my settings for felt and the flower pieces remain red when they should be blue. Can you help me? I have cut things in carriage 1 before but never in carriage 2. I just got my rotary blade. Thanks.
@DesignBundles Жыл бұрын
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
@cindyloucoleman93002 жыл бұрын
I am trying to cut a design in faux letter will it cut with the cameo 4? i tried to cut it out and it had abunch of little lines around the desgin and was cutting those out. help thanks
@rosachavez39422 жыл бұрын
Did you ever figure out how to get those off? Mine is doing the same and messing up the whole sheet
@craftablegoodies Жыл бұрын
Thank you for the video. It seems like a waste to use transfer tape every time you want to cut a flower. I also believe that you rolled your flower backward. it is my understanding from watching other people and making them myself that the part you started with is meant to be glued to the backside of the flower to hold it together.
@DesignBundles Жыл бұрын
Thank you for the tips :)
@jillfoster73733 жыл бұрын
I’ve tried doing a couple different flowers, very much like the one you’ve cut, and each time the loops are partially in the design itself and it cuts right through the design. Is there anyway to move the loops or is this something that is there because of how it’s the designed?
@DesignBundles3 жыл бұрын
Hmm, that would be frustrating Jill. I would double-click your design to access the point-editing, and see if you have any red dots to indicate a broken path. If the design is complete, the software should know that and not put the little loops inside the design. Hope this helps! ---Becky
@jillfoster73733 жыл бұрын
@@DesignBundles Thank you for the suggestion. I finally figured it out and it was that I had not updated my software. There must have been some sort of fix in one of the updates because the design hooks and loops were placed correctly on the outside of the simple design once I updated. I was beyond happy and I learned how important it was to keep up to date.
@Jos_craft_space3 жыл бұрын
Do you always start from the base of the flower?
@DesignBundles3 жыл бұрын
Hey Jo, I actually roll my flowers backwards, I always have and can't seem to break the habit. I think you can roll *most* flowers either way, but there are some designs that will get wider towards the outside that will look strange if not rolled correctly. Hope this helps! ---Becky
@Jos_craft_space3 жыл бұрын
@@DesignBundles Hi Becky, I might have to try that, as I can’t seem to get mine right !
@GottyJ3 жыл бұрын
Can you use the rotary blade to cut vinyl ?
@DesignBundles3 жыл бұрын
I suppose you can, but I haven't tried. Since it's a more expensive blade, I hoard it away to extend it's life expectancy. Hope this helps! ---Becky
@eminagusinac69693 жыл бұрын
my Cameo cut that extra lines ,omg help me ,how can I turn it off ??
@DesignBundles3 жыл бұрын
Hey Emina, what extra lines do you mean? The alignment lines for your rotary blade? You'll need to leave those on for the blade to work correctly. Hope this helps! ---Becky
@craigjen053 жыл бұрын
It’s impossible to find any blades for the Cameo 4 😞
@DesignBundles3 жыл бұрын
Hey Jenny, there is definitely a shortage right now. This isn't the norm though, hopefully it'll clear up soon. Hope this helps! ---Becky
@probante3 жыл бұрын
Hallo Becky, before I throw this thing out of the Window, can you p l e a s e help me with this message REGISTRATION FAILED. I have tried almost everthing in the world but it keeps giving me that stupid message, so at the moment i cant do anything.... (sad)
@DesignBundles3 жыл бұрын
Hey there! Sorry to hear your frustrations! Are you trying to use the Print and Cut feature? If not, you can just turn off your Registration Marks (Page Setup Panel) and that error should go away. Hope this helps! ---Becky
@probante3 жыл бұрын
@@DesignBundles I used four square white stickers on each corner and performed the registration. it worked. Thanks for your help anyways.
@MajkenPullin3 жыл бұрын
Great tutorial that now makes me want to try my rotary blade! What about cutting wool felt? I’m wondering why that’s not an option in the materials list, and that’s what I have.
@annekekielstra4283 жыл бұрын
❤️🇳🇱
@Alpha_DTF_Print9 ай бұрын
🎅 Transform your holiday crafts with Alpha DTF Print's UV DTF magic! Any tips on creating stunning Christmas designs with UV printing? Share your wisdom! @AlphaDTFPrint
@GLUONI3 жыл бұрын
The cameo recogcgnize the blade on place 2 but either won't cut and the button number 2 for the test is not highlighted. What should I do?