GE Front Load Washer Dryer Review | Are They Right for Your Home?

Should you consider GE's new front load washers and dryers? I own these myself so I'll share my first-hand experience. I'll also help you avoid some installation issues that plagued my family. And finally, I'll explain the differences between GE’s three different series of UltraFresh machines and what you get at each price point.
► EXTENDED IN-DEPTH REVIEW:
www.designerappliances.com/bl...
► WATCH: Top Load Vs Front Load
• Front Load vs Top Load...
► SUBSCRIBE: We release videos weekly! / @designerappliances
► VISIT US: If you're in the New York/New Jersey area, stop by our showroom to experience GE washers in person
Designer Appliances
280 Main Street
Bedminster NJ, 07921
or
Designer Appliances
122 Watchung Ave
Montclair, NJ 07043
► QUESTIONS:
Need help choosing the right GE washer for your home? Call us at 888-714-4938
► INSTAGRAM:
/ designerappliances
► FACEBOOK:
/ designerappliances
0:00 - GE Front Load Washer Introduction
1:16 - Front Load vs. Top Load Washers
1:43 - Front Load Modly Gaskets & Class Action Lawsuits
2:27 - Why is there mold in my washer?
3:04 - Does GE's UltraFresh system work?
3:18 - How does GE's UltraFresh system work?
4:57 - Smart Detergent Dispenser
6:20 - GE Factory Repair Service
7:30 - GE Front Load Washer Series Overview
8:25 - GE 550 Entry Level Series Overview (Fits King Size Comforter)
10:12 - GE 650 Base Series Overview
11:00 - GE 850 Premium Series Overview
12:07 - Best GE Front Load Washer for Most People
12:43 - Cons of GE Front Load Washers
13:23 - Exterior Design
13:46 - Vibration Issues with GE + Solution
14:37 - Conclusion
#bestappliances #appliancereviews #gefrontloadwasher

[@DesignerAppliances]

✅ Read our extended review on GE Front Load Washers: www.designerappliances.com/blog/best-ge-washer-dryer/

[@bradstrong3338]

Do you have any info on the GE profile 5.3 model? Wanted to see is it worth spending an extra 200 for profile that's a little bigger. Or would the 5.0 model the better choice for the savings. Thanks for the great video

[@joycecummings3243]

I am glad people here are happy with GE. We have had issues with our front load washer seal. 5 times the seal has come off. We paid extra for a Assurance warranty. After this latest problem I contacted GE and so far they were absolutely no help at all. Each time the washer is a problem there is a two week wait for service. Cost of going to the laundromat is 150 dollars each two week period. After the 5th time I contacted GE and they were totally uninterested in assisting us. I see here where the company has aided customers who were out of warranty and that they have made design changes to their product. A word to the wise, do some research before purchasing this product.

[@charlesdavis2165]

Your videos are so well presented. You provide everything we want to know about the product, its features, the pros, the cons. I also appreciate your sharing the models you use in your own home. No fluff, no hype, just honest presentations, and the caveat that while you're giving your personal preferences, the choice is ours. Well done!

[@Ryan2022]

Had our dryer for 6 weeks. Now know I need a cold water hookup for steam to work thanks to this video.

[@volcomstone54]

This is a really quality video and covers all aspects I enjoy to watch regarding weird things like this. Thank you for doing this.

[@TraumaRNKen]

This was exactly the review and explanation I was looking for. Thank you!

[@midnite8791]

Thank you! After hemming and hawing over HE top load, and having a bad experience with a samsung front load, I think I have decided on the 650, being a single guy. Thank you for going over the different versions!

[@ericswild]

Thank you for the review. We love the idea of the mold mitigation features.

[@bayodaman]

Now this is the video I was looking for. Thank you good sir.

[@jasonredepenning]

I just bought a 850 with 5.2 space. I love it so far. Gets the close way cleaner than my old LG that finally threw the bearings after 15 years. My clothes smell way better also. Maybe it had mold somewhere but I couldn't see it.

[@casafix3017]

I just placed my order for the GE 850 washer and gas dryer based on your reviews. Thank you for your video.

[@ChristmasMorning1995]

Do you like it

[@javondashoffner-collins540]

Fantastic review! Very thorough!

[@SoutherLife]

So happy you made this video and I was able to find it. This really helped me narrowdown my decision being I'm looking for a new washer and dryer at this time. Thank You!

[@danib915]

Which did you end up going with?

[@SoutherLife]

@@danib915Hello, I chose the GE deluxe 850 model in white. Been having it for about 9 months now. So for it’s been great. I’ll admit I don’t use the 1-step wash and dry feature, but the main reason for choosing the 850 model is the large size, being I have a thick and large king size bed duvet to wash. It saves me trips to the laundry mat.

[@angieakins9956]

We just purchased GE Ultra Fresh front loader washer and dryer they’ll be delivered on September 30 I can not wait to start using it I loved the products new fixtures was very helpful to watched your video. Thanks😅

[@docholiday9786]

Do you still like it? My son is special needs and I do a lot of laundry!! Thank you!!

[@Donald89890]

Excellent review! Right to the point and very helpful!

[@makinMYway75]

Thank you.. very informative I order 650 washer n dryer

[@moumi21s]

I have this set for 2 years and I love it! I love GE all my appliances are GE!

[@jenniferp7749]

Hi. Would you mind letting me know if your washer uses very little water ? I see water but I’m use to seeing a lot of water when I had a front loader or when I went to the laundry mat this washer get them wet but not a lot of water. Thanks

[@moumi21s]

@@jenniferp7749 it uses a decent amount of water to me. It depends what settings you use. I never had an issue. My clothes always come out clean.

[@jenniferp7749]

@@moumi21s thank you 😊

[@shondranorwood5006]

@@jenniferp7749I’m having the same problem now but it’s wasn’t like that when I first bought it when I had to move out my apartment so of course I had to unplug and that’s when the washers wasn’t getting enough water in it I think he need reprogramming or some 🤷🏽‍♀️

[@jenniferp7749]

@@moumi21s quick question what setting do you generally use that uses normal amount of water ? Thanks.

[@Lyfehurts66]

Great Video and you are correct the spin cycle is much louder than I expected...

[@braden2233]

GE is amaizng customer service. Our fridge needed a new fan after only be king 3 years old and they were amazing. Also our dishwasher went out and stopped heating so they replaced it and we paid 200$ to have the upgraded Profile

[@baroneleve1196]

I'm currently eyeing this online at Best buy

[@ariellesmith5286]

Amazing review! Thank you so much. I think I know what I'm going to purchase :D

[@therealjonsmith1]

Great review, thank you!

[@markbloyd9852]

A friend of ours recently had the whole house electrical wiring replaced, and the circuit breaker kept tripping on the washer and dryer for them, as well. They called the company about it, and were told that the new gfci circuit breakers were smart, and would learn to handle the machines. Turns out they were right, and there hasn't been a problem since. Only took a few goes. Hope this helps others in this situation.

[@salvanas702]

Was there a fix? or did they have to replace the gfci breakers to something else. Thanks in advance.

[@hombrenuevoacts1728]

I bought mine in October 2020, this week (may 2023) it won't spin and end the cycle with the clothes soaked. This stupid machine was expensive. Don't buy it. The last washer I had lasted a good decade ...... the one before two decades! They are supposed to be getting better, not worse! Shame on GE!!!!

[@35057]

With This whole “mold issue” I just keep the door open. I don’t click it shut. It’s a habit now but that’s our Samsung pair that we are looking to replace with this GE set. The Samsung has been ok, and VE had the drier apart multiple times. The washer is getting really loud also. It’s been about 9 years so I guess they’ve done ok. 😆

[@nvdirtfreakful]

I recently purchased the GE 650 washer (and dryer) after enduring 8 months of nightmarish hell from LG. My brand new $3000k+ set never worked right from Day 1 and LGs customer service was so abysmal that it took 8 months to finally get them to admit that the units were faulty and refund me for them. I will never buy another LG product as long as I live! Happy to hear the GE machines sound so wonderful, and cheaper than the LGs I purchased and hopefully better customer service. My new units arrive in 5 days, I’m keeping my fingers crossed 🤞

[@a.d.c7941]

How have they been????

[@dontsurroundurselfwithurself]

Hi! I know I'm late to this party but I just purchased the 850 series w/matching dryer based in large part by this excellent review. I have a few comments for those considering the GE line. Firstly, I agree with the video that between the three, the 650 is the way to go. My dealer didn't have it in stock, so I went up to the 850, as mentioned. However, since this video's publication, there is a new GE Profile model (PFW950) positioned above this trio by GE Appliances. I regret not having purchased this upgraded washer/dryer combo. Although the differences between this new entry largely lies in its expanded software that offers significant features like being able to have the machine learn your preferences for each cycle, it also adds a much-needed moisture sensor to the UltraFresh System, so that it is based on dryness, not just time. Do yourself a favor and check out this one if you're considering GE.

[@joshuabanks399]

I’m in the market for 650 or 850 and now I learned about the 950 that also gets the Profile branding. Is the 950 really worth the extra about $1000 over the 650?

[@bradgiovagnoli6660]

With the Breaker Tripping Problem did you revert to the other GFCI Outlet instead of the GFCI Breaker? Thanks

[@quiltsick]

I have had my 650 model for a few weeks. It is the best washer I have ever owned & there have been many. I had a GE set 25 or so years ago & really disliked them but technology has changed. One of the reasons for my purchase of the 650 was the Microban technology. My laundry is in the basement & even tho my dehumidifier is on 24/7 my old Whirlpool Bravos front loader had a real mold issue in the dispenser tray. When I discovered it I worked a long time trying to clean it. After that I removed at the end of any laundry day & dried it out the best I could & left it out & then sprayed the inside with alcohol. That took care of about 90% of the problem. I am still removing the tray in the 650 out of habit. My only problem so far is the Sound button. I only get 2 sound levels instead of 4 & the 2 I have are useless. I could hear the end of a cycle upstairs when my Whirlpool finished. Also my Wifi app notifies me when a load will be finished in 5 min. I wish it would alert me when is it done also. I have not purchased the dryer yet. Patiently waiting for my old Maytag dryer to die. I replace the heating element 3-4 yrs ago & it is still working really well. But I really need the new dryer & pedestal because of body issues. My hubby offered to buy me the dryer also but I declined. Now I am thinking about selling the dryer so I can buy the GE dryer 😎 Thanks for a great video!

[@lbvillarreal]

How is your washer holding up? Have you had any problems with mold? I'm looking into buying the set but im worried about the mold issue.

[@quiltsick]

@@lbvillarreal I still love it! Absolutely no mold! Believe me I check! I do take out the dispenser when I done with laundry for the day & dry out that interior & the door & interior blue rim, doesn't take long at all. I also run the venting cycle when I am done. I hope it lasts a long time! I don't think you will be sorry if you buy it!

[@lbvillarreal]

@@quiltsick thank you so much for your reply!

[@quiltsick]

@@lbvillarreal you are welcome. I also experimented yesterday by starting a load & letting the water come in & start to tumble. Then I turned off the machine & switched to another cycle but did not turn it on. Then I went back to the original cycle & started it again & was able to have more water in the load! I would not do this for all loads but I do have some that I would like more water. The only problem I had is with a load today that I was using prewash with oxyclean. I selected no detergent since it was still in there but the machine would not let me do the prewash with no detergent selected. I am going to start experimenting some more & write my successes down, lol

[@seekfactsnotfiction9056]

@@quiltsick Thank you for posting your first hand experience, that means a lot for consumers to hear from other users of the product. I am not familiar with washer and driers at all, but I am shopping to buy the best for my mom’s new home. I’ve been searching for the last 3 weeks now, so far I found lots of recommendation about 1)Speed Queen TC - 5000 series 2)Maytag that ends with GW But I want to avoid loud sounds. I need to buy quiet efficient one! Have you had a chance to use any of the two I mentioned above? Compared to this GE that you own now! Thanks for your input

[@peanutaj7]

Just got the 650!!!

[@watson111505]

The 850 is amazing.

[@meenashi]

I was in market.. and comparing LG vs GE and made decision to buy GE based on your review. Thank you , great help 👍

[@Victor-th8tb]

You bought the GE ?

[@Thedirtylittlesecret]

No it’s just a fake review thats why you got no answer.

[@Victor-th8tb]

@@Thedirtylittlesecret I already bought the LG w4500.

[@Thedirtylittlesecret]

@@Victor-th8tb do you feel you maid the right choice?

[@Victor-th8tb]

@@Thedirtylittlesecret Yes

[@crsp76691]

We just got rid of out moldy frigidaire that kept sucking up our laundry during drain cycle! I had to disassemble that frigidaire every year to clean out the plugged lint trap, frkn suckec. We ordered a giant 5.5cft top loader! Done with these fronties

[@Youtjube]

1:56 Europe here. We’ve been using front loader since decades. For me it seems the mold issue is a customer failure. Let the door open, use a small towel after every washing cycle for drying some wet areas and remove the detergent area. Never experienced mold

[@puppyeyescraft]

Thank you for the video! I like this washer but I'm wondering if I should buy this model because I'm afraid it will cause problems when cleaning the pump filter. LG and Samsung have a small hose to drain the water before removing the pump filter, so you don't have to worry about flooding the floor. But the GE washers don’t have that hose. Even if you put a towel and a container underneath to catch water, there is only space for a relatively low container, so I am worried that the floor will be flooded every time I clean it. Have you ever felt any difficulty in cleaning it?

[@blissfuljoy6049]

You mentioned mold in the garage and basement being worse but what about temperature changes? I am in a hot climate with my machines in the garage. I'm having issues with my Bravos washer and may have to get a new one. I'm worried about buying a front load or fancier top load because of the computers in these machines now. Any advice?

[@Debraf01]

How does the smart dispenser work when you have a water softener? I adjust detergent depending on water softener time to regenerate.

[@CDP135Z]

I noticed that the baskets between the 650 and 850 series are a different material. Can you offer any input on the aluminum vs steel baskets? Thanks for such great info.

[@familyholck]

In future reviews, please demo the sound effects of buttons & end- cycle alert.

[@michaelgreenley1174]

Could you recommend the best front load in your opinion? I was set on the GE GFW850 but my depth availability is exactly 33” and these are 34”. What would be the best alternative? I hear good things from LG, but thought I’d ask the experts. Thanks in advance!

[@joselarrarte6964]

Mine does a squeaky sound while washing. My washer is just over a year old and has no warranty at this point. Any advise? By any chance you know what it would be?

[@denisekolacz9494]

I am considering a new dryer and the GE 550 is in the running, I would like to know if the temperature and time can be changed on a pre programmed cycle?

[@anniedettwiler4043]

Thank you! Your videos are the best! Very helpful! We are thinking about getting the GE front load washer and dryer along with the pedestals since we are both tall but the pedestals get terrible reviews. Since you own the set yourself, have you had any problem with the pedestals?

[@quiltsick]

Did you buy the set? I have no problem with my washer pedestal!

[@quiltsick]

Annie, I have the 650 washer with pedestal. I initially had too much vibration compared to my previous washer. GE sent a repairman out who was almost as small as I am & he was awesome how he handled that big machine. He actually came out to get my GE app back online. Due to installing ADT doorbell camera we changed the wifi code & could not get the machine to accept it. He brought new parts & got me back online & leveled the machine perfectly! I still want the dryer but won't purchase till my current one dies. It has had the heating element replaced for almost $400 & it is 11 or 12 yrs old now so not sure how long I will have to wait, lol If you do buy the set I hope you love it. I would love it more if I didn't have to go to the basement to do laundry!

[@n-da-bunka2650]

Any guidance on the difference between the 850 series and the Profile?

[@ladjkaoz]

good info..

[@kimberlybarnes0817]

Do you recommend this washer over a speed queen?

[@chrisbourne3543]

Would GE ever make heat pump dryers that match their 650 Frontload washer so we don’t need to connect to water

[@baileymay5476]

I got this washer delivered yesterday, did my first load today,it would shut off and not drain the water. Waiting on a replacement after just 24 hours.

[@chrisbourne3543]

Would you make a line of products for like craftsman or Kirkland signature products, etc.

[@crtw08]

I am in the market for a new washer and dryer. My present front load is a whirlpool that I like expect the fact of it moving or some say walking from its place. We had a flood in the basement (natural disaster) so everything has to go. So the two I'm inquiring about are these GE ultrafresh 850 series and the LG 7.3cu ft turbosteam dryer and top load high efficiency washer with 3D technology (WT7900HBA). Can you and anyone else give me you advice with them in comparison?

[@jobond3317]

I have an old Miele over 20 years old. I don’t think I ever had mould issues. Yes I wipe it out. Leave the door open and detergent tray out

[@dttra566]

REALLY wish I had known about this washing machine before we bought the LG washing machine now with its rubber gasket still overrun with mold after just 2 years of use despite our relentless efforts in wiping down the rubber gasket and the door and keeping the door open every single time after we finish a load. Now we would have to spend another $1000+ to buy this GE washing machine if we really want to live a mold-free life. And our LG washing machine didn't even come with a user guide just a maintenance and installation manuel. I had to go onto the internet and download a 60-page user guide.

[@gamerwhiz6847]

Pretty awful. You would think LG would have gotten a clue since they were sued.

[@dttra566]

@@gamerwhiz6847 they just don't give a xxxx.

[@braden2233]

We just ordered these! We have the Maytag Bravos XL Top loader set. And they are terrible. They just don’t get everything wet

[@NinjaKiller1022]

My parents have a Maytag washer and it has a serious mold problem, as mold grows relatively fast. Their washer is almost 10 years old, and their dryer is about 19 years old. I’m looking to buy them a brand new set, and looking to get them a GE 850 series pair.

[@jaekrupp8591]

I WILL say , I have these units && my washer AUTOMATICALLY vents after u close the door !

[@phirintra]

I just bought 850. You mention vibration and noices si what would be your recommendation

[@noahhopkins923]

Great video. What is the difference between GE and GE Profile?

[@jasonredepenning]

I got the GE profile 850 and seams the same as the one he showed. Except I have 5.2 for space.

[@andyramphal9461]

what are difference between GE 5.0 cu. ft. Washer vs GE 5.3 cu. ft. Washer. Can both of them do king size comforters

[@mz_PE25]

Anyone know if multiple phones can connect to these units so that multiple people get the notifications at the same time?

[@joshuabanks399]

Hey great video, Can you make an updated video comparing the 650, 850 and now the profile 950 model?

[@DesignerAppliances]

Great idea, we will add it to the list!

[@luiscruz679]

To prevent mold leave the washer open for a couple of days to dry

[@quiltsick]

leaving it open & the dispenser did not keep the mold out of my Whirlpool front loader. It was a constant battle even thos I dried it as much as I could. The dispenser area was terrible. After I cleaned it as well as I could I dried it out each time I was done & sprayed alcohol in the dispenser area. It helped some but it is not as good as the blue Microban of the GE. I do hope it lasts a long time.

[@michaelgarcia5057]

ge 650 vs lg washtower? thx kind sir!

[@micahdarby8090]

I’ve had my 850 for 15 months. Two weeks ago it stopped draining. We checked the drain line (clear), drain filter (clear), and replaced the drain pump. Still not draining. From what I can tell this is a common issue with the 850 as well as the 650. Based off other owner reviews, it’s an electrical or motherboard issue that is more expensive to fix than to purchase a new machine. So disappointed to be buying two new appliances (since mine are stacked only 15 months) after doing my due diligence and researching for over a month when I purchased this nightmare. Do NOT do it folks! The number of 1 star reviews in the last year for these machines are unimaginable.

[@angscoma]

Hi. Thanks so much for your video. I was not aware of the manual venting process. I am having a little trouble with my clothes smelling, and I don’t know what else to try. I have switched my detergent, I’ve sanitized my washing machine and I never let them sit. Still of my clothes smell gross after completing the washer and dryer process. I do like to use a more natural detergent, but wondering if it’s to do with my appliances. If you have any tips, I would be all ears!

[@angoraama613]

Try using powder detergent, I read that someone else was saying that liquids contain animal fat . Let us know if it helps.

[@reviewmaster517]

Do you think they are as good as the 3600 LG?

[@jaimea.3318]

Can you put the dry soap?

[@loridalessiomahoney7191]

HI -- So I was wondering how often did you use the fan/vent system? Every other day? Once a week/once ever 2 or almost never?LOL

[@swp466]

Lots of great detail in here -- do you happen to have an updated version of this video to cover the new 950 (Profile) series washers & dryers? I just ordered a set because my tried & true Kenmore front loader just failed over the weekend. Also, you mentioned an anticipated 10 year lifespan -- is that really accurate? if so, that's a bit disappointing since the set I'm replacing lasted a full 20 years doing on average 4-5 loads per week. Although my Kenmore set was made in Germany, so the build quality was somewhat exceptional to begin with. I was hoping that by purchasing in this price range, I'd get close to that longevity again.

[@rcooper1033]

I still have my regular Kenmore dryer from 20 years ago.

[@eraldway]

I have purchased the very first LG front loaders in the market back in 2006. These cost over 5000 dollars in 2006 and adjusted for inflation is over 8000 dollars. First page on the manual talked about how to keep the front loader clean and avoid mold. After 16 years they are still in use with ZERO mold if you take care of them properly.

[@TechVHD]

Model #

[@eraldway]

@@TechVHD WM3360HRCA

[@mawelsh]

I got a dozen years out of our LG washer before the motor failed. My two basics to keep mold at bay - keep door open and only use powder detergent

[@hombrenuevoacts1728]

I bought mine in October 2020, this week (may 2023) it won't spin and end the cycle with the clothes soaked. This stupid machine was expensive. Don't buy it. The last washer I had lasted a good decade ...... the one before two decades! They are supposed to be getting better, not worse! Shame on GE!!!!

[@eraldway]

@@hombrenuevoacts1728 yeah I guess they realized keeping a washer for 17 years was not good for business.

[@user-cv7yy6cu9k]

Question: I own this duo, and use the automatic detergent dispenser with liquid Tide all the time. However, I would like to occasionally use my Arm & Hammer washing soda, which is a powder, in conjunction with the detergent for certain loads. Arm & Hammer recommends using a quarter cup of powder at the beginning of the wash cycle along with your detergent. Is there any way to do this conveniently? May I set the wash cycle for the auto dispenser as well as put the powder into the tray (after flipping the little flap over for powder)? What I have been doing thus far is I have been dissolving the washing powder in a little water, letting the machine get started with the auto dispenser for the liquid Tide, then pausing the machine and pouring in the powder/water combo right into the washer before proceeding.

[@CaseAgainstFaith1]

I just ordered the new 655 model. Upgraded from the 650. Haven't received it yet. But the 655 is 5.0 cu. ft. like the 850, yet the same outside dimensions of the 650. It's like the TARDIS, LOL. There is almost no difference between the 655 and 850 except the wash & dry in the washer feature, and wi-fi connectivity to the dryer which I have no idea what that would even do for me.

[@jayjayfay6464]

How do these perform with laundry sheets?

[@appliancealliance4444]

7:00 this is only half true. GE has two tiers when it comes to appliance repair service “Factory Service” and “Customer Care” customer care is 3rd party. I’m a customer care technician that can perform warranty work for Ge however the reason companies don’t invest their time is not because they get paid a flat rate but because they don’t get paid well. most companies pay a total of around $100 in labor for each completed repair, not per trip, completed repair.

[@stephaniecisneros1003]

How is this on needing repairs? Should I still go with speedqueen?

[@pawanpreetbahia]

cant figure out why gas dryer of this model gives E20 codes then stopped with beep kept going (days old clean filter clean vent)

[@dougnykel7693]

Since you actually own and use a GE machine, I’d like to pick your brain if possible, we pretty much have decided on the 850 model, what I would like to know, is not having the height without removing and remodel, we would go with the 7 inch pedestal instead of the larger ones, are they as sturdy as the 16 inch, or no !!!, also do you recommend vibration pads on these machines, or are they not needed. Any help is appreciated, thanks Doug Nykel

[@judytorck4380]

I purchased this model, dryer stopped heating at 2 year. GE can't figure out why or how to fix it

[@spanishmoss905]

Is the 950 worth the upgrade.

[@surrendertoflow78]

This is one if the washers we are considering. But I heard from a few salespeople in our area (NC) that all front load washers nowadays have antimicrobial materials in the gasket and detergent drawer. We asked LG and Samsung and they both said they do. So is the only thing really that sets the GE ultrafresh apart from the others is the venting system (which could be made up for by leaving the doors open after doing laundry)? The low ratings of GE washers in consumer reports has me nervous about buying this washer over LG.

[@rpiedra74]

I was thinking the same as you even looking into consumer reports. Which one did you decide on?

[@surrendertoflow78]

@@rpiedra74 we decided on Samsung optiwash but still waiting on the delivery!

[@jodymc1657]

The main CCU in the control panel just went out on our 1 year old 650 front load machine. Not happy! It cost 1/2 the price of the new machine to fix.

[@ganash11]

We have decided on the 850 Pair in Blue. If they do vibrate a lot more than my Old Kenmore I will really be disappointed. We have a Ranch with an un-updated/finished basement but nothing really gets mold? Let you know how it turns out. Oh and think we will not get Pedestals mainly because my Wife is kinda short. And Thank You for the Great Video!

[@dennisstafford7801]

Excellent review

[@jeromedavis8575]

I wish they had smart dispense for fabric softener also. They had it before.

[@DesignerAppliances]

Great point! I forgot to add that tidbit in but thanks for catching it.

[@jeromedavis8575]

@@DesignerAppliances I always use fabric softener in my laundry. They should also consider adding a smart dispenser for chlorine bleach that works on the whites cycle.

[@mrpacs1001]

for the 850 washer is the door hinge on the left or right? Are you able to move the door to the other side?

[@JustMe007]

Yes, it tells you in the manual! 🙄

[@ffmedic1638]

What model electric dryer goes with the GFW650SSNWW?

[@mikepaul4184]

White dryer. GFD65ESSNWW

[@VocalEdgeTV]

Does the interior really have blue lights ?

[@dianapardo6872]

Is there any way just to use spin only when there is no option on that on washer?

[@Blurain727]

How to put the machine into drain & spin: Set the washer to rinse & spin, you'll notice the extra rinse option is automatically selected. If you turn off the extra rinse option, your machine will now run a drain & spin! No water will enter the machine.

[@shondranorwood5006]

I have this set anybody know how to fill the washer with water because mines not running enough water in it for some reason it start acting strange when I had to unplug it to move

[@sophiewallace8662]

How does it clean the clothes with out water?

[@michaelwhetsel2295]

Do you have any reviews on ge profile 950?

[@DesignerAppliances]

Not yet but we will add it to our upcoming video list!

[@sandrasmart277]

Can u use pods in this washer instead of liquid detergent

[@DesignerAppliances]

You can but we recommend the detergent dispenser for best washing results. If you are a loyal pod user, we recommend the newest Electrolux washer which actually has a pod dispenser. The dispenser prevents the pod plastic from melting/sticking to your clothes.

[@user-sd6gw1ic1i]

G E Profile 2009 DPVH890EJWW .It start ,spin short and stop ? How resolved this ?

[@Connor-xe6fl]

I don't understand the mold issue. I have a 2019 Electrolux 600 series and even today I've never smelled mold once. After I'm done washing I keep the door open and I pull the dispenser tray forward and allow air to circulate. The door does stick out into the hallway area a bit but for a clean mold free washer it's a no brainer.

[@pink20018]

Hi, I am curious, I just bought this washer, and when I turned on the venting after I finished whole day washing, it was working about the whole night, then the next day morning I checked the machine, the glass door and the rubber seal were still wet and had water there, I thought it should be completely dry? If not dry how to prevent mildew? How is yours? Thank you!

[@Todd.T]

Mine is completely dry. It does 480 minutes of venting. I don't use the feature often, I just leave the door open and run bleach on the clean cycle once every month and a half. Had mine since January 2021. I also skip wiping the door gasket because I find condensation forms on the glass and then drips on the gasket.

[@quiltsick]

Mine is always dry after using that cycle but I do wipe the inside of the door dry & somewhat dry the rubber seal, & remove the soap dispenser & dry it off some & put folded up paper towels int he bleach & softener dispenser. It takes no time to do that. I don't want nightmares after my last washer.

[@viper1100hp]

Hi how are you what do you think about the "GE Washer Profile Series PFW950SPTDS" also the "GE Dryer Profile Series PFD95GSPTDS" are they better than the one you tested 850 series or are they the same or is it a waste of money please let me know

[@Luissauceda13]

Did you find out if it's worth the extra $$?

[@viper1100hp]

@@Luissauceda13 not yet brother.., waiting on the place to see if they had the same model number have color

[@sherrygarrison7923]

I have and love the GE Ultra vent 850 model. The problem I’m having is that pet hair clings to the microbial rim and it’s hard to remove. I don’t like the fact that I have to put dirty clothes in the dryer to repel dog hair, then place in the washer. A wet paper towel doesn’t work. Please advise. Thanks

[@jasonredepenning]

Get rid of the dog or place it in the dryer once à week to get rid of loose hairs.

[@SanJose408Alex]

@@jasonredepenning absolutely. getting rid of your fur ball is the best option, but placing them in the dryer on a low tumble does wonders. I second this 👍

[@jasonredepenning]

@@SanJose408Alex or spray the rubber with WD40 before every wash is what a friend does.

[@melannylozano466]

I have the 2 in 1, washes and dries but as it spins it shakes so much that makes my whole apartment move lol i don’t know how can that get fix I need help!!!! Also the app is not working, it tells me that it’s been an error and to try again later

[@chaoticstylez]

Why don’t they drain on the spin cycle or why can’t you manually run the spin cycle? I’m constantly having soaked clothes after a normal wash. My machines are new, BTW.

[@mistyvanpelt1267]

I have this same W&D if you hold the rinse and spin button down it will just spin it out.

[@tpop3723]

Anyone know if the light on the washing machine eventually turns off if you want to leave it open?

[@NinjaKiller1022]

Yes, it will. Most new front loader washers have a light cut-off to reduce consumption of electricity.

[@tpop3723]

@@NinjaKiller1022 Thanks

[@JustMe007]

Just push the damn light button to turn it off! 🙄

[@manuel0578]

Mold issue plaguing all front load washers? What?! Never heard of that.

[@nabagerekalucky.jesusiscomingb]

Hi good evening me I want to ask if I am in you Uganda can I see you get that machine

[@chrisbourne3543]

Have you ever heard of a heat pump it is a air to water heat pump that’s a whole unit is outside the house The system does heating and cooling of the house and also does domestic hot water tanks I was wondering if they Could be plumbed in for a dryer of clothing

[@goldenqueen6007]

Now can you get that Series without Wi-Fi

[@quiltsick]

you don't have to use the wifi. just don't download the app. I however love it because I have a 2 story with a basement & laundry is in the basement. It has saved this old body many extra trips. I know I can put a reminder on my phone but don't always remember to