DESTROYED MY RADIATOR FAN + How to replace it (BMW E90, E92)

www.fcpeuro.com/
We all make mistakes. An extra few seconds of preparation can save you from a big headache or an expensive repair. In a rush to get the front of my car jacked up, I missed the jacking point under the engine and the jack went right into the engine bay, destroying my radiator cooling fan. In this video, I show step by step how to replace it. This DIY is actually pretty straight forward and only requires a couple of tools. Leave a comment and let me know your most embarrassing story working on cars!
Tools:
T20 Torx: amzn.to/2DqnE1T
T25 Torx: amzn.to/2CZFo33
My Camera Gear:
Camera - Sony α6500: amzn.to/2gK2am7
Main Lens - Sony 16-50mm: amzn.to/2gK2lhh
Second Lens - Rokinon 85mm amzn.to/2EliC74
Studio Light - Nova Ring Light amzn.to/2Ej15w5
Mic - RØDE VideoMic Go: amzn.to/2DhUDFm
Computer - Apple iMac 27” : amzn.to/2z6FvqS
Editing Software - Premiere Pro: amzn.to/2Bl9bFW
Motion graphics software - After Effects : amzn.to/2Bk0Imj
Follow Me:
Instagram - @justinbuice
Facebook - http: justinbuice

[@RobtheRomeoNerd]

Back when I got my first car, I came home convinced the horn didn't work. After pushing the steering wheel center over and over. So I mentioned it to my mom's boyfriend while we were replacing the water pump, we ended up going through all the fuses and wiring, down to the actual horn itself. Only to finally realize the horn worked the whole time. But I was pushing the center of the wheel instead of the small buttons on the edge of the wheel.

[@justinbuice]

That's awesome lol! I did the same thing when I got my BMW. Id press the logo in the center, but just like yours, the horn is on the edge of the wheel.

[@krono996]

Haha I have the same little buttons! I did press them though, but my car is notorius for having a shit earth for the horn, so it just doesn't work :(

[@erikalvarez4516]

I have a story that will make you feel better. When I was in highschool, I was fixing up the family e36 325i and was replacing the driver side window regulator motor. Everything was going smoothly until I came to the part where I had to line up the glass to the two holders of the regulator frame. Remind you that the e36 window controls are in the center near the gear shift so with me needing to have the door open to make the needed repairs it was a long reach to slowly bump the control to make little adjustments. Since I was a 17 year old who never drove the car while it was working, I didn't know it had an auto roll down push feature. So as I needed to roll it down just a bit, it engaged the motor to roll all the way down. My arm was in a position where the scissor arms of the actuator pinched down on my arm and also had my thumb bent back almost touching my wrist. So as I was laying there wondering what to do, I had to swing the door closed with my arm attached to reach the controls and reverse the direction. Once I got my arm free I laid down on the floor of the garage in a sweat and being most thankful I didn't break or hurt anything, my dad was looking at me through the garage door window shaking his head as he walked away. It was the longest 10 seconds of my life. Haha

[@justinbuice]

Dang! Sounds like it hurt!

[@erikalvarez4516]

Justin Buice haha the most painful part of that day was towards my pride.

[@eddiecasusol1133]

Keeping it real as always! We all make mistakes. Simple oil change and forgot to install the drain plug. Or jacking up the vehicle in the wrong spot. Did it! Glad you're able to come through and persevere. Your videos are great! Keep em coming.

[@justinbuice]

Thank you!

[@hakeemg6433]

Thats some A1 dedication right there. Filming in 5 degrees while working on your car. It was 30 here and I had a hard time convincing myself to go out.

[@justinbuice]

Luckily the engine was hot enough to warm up the small space where I was working :)

[@kamilzieba7427]

Lucky you missed the oil pan! Can't imagine how much of a pain that would've been. Keep it up with these videos man, I always enjoy them!

[@justinbuice]

Thank you!

[@stevengambrell8]

Did exactly the same thing, except I had the jack slip off the crossmember and destroyed the fan and fan shroud. Thanks for sharing ! Misery really does love company: )

[@scott_dc947]

Same thing bro.

[@BlehBleh0]

Your mistakes have taught me so much. Seriously. I wouldn’t have a running E93 if it weren’t for these awesome videos.

[@BMWFanatic]

Now that was a great DIY!

[@justinbuice]

Thanks man!

[@voz39zam]

wifes car started making noise turn out to be the cooling fan, your video helps a lot, thanks for sharing

[@dutchless7794]

I took my fan out yesterday (335is E92, N54) to replace belt tensioner & belt. The amount of room I have seems so much less than your car; not sure why. Great advice you gave though to be careful with venting line to the radiator hose, wish I saw your video before attempting taking out my fan. After ordering today to expedite those two hoses ($129), I learned a valuable lesson....

[@despiseme638]

6 years later and you still helping people, I did the extract same thing 😭

[@0Brie0Brie0]

Did this same thing, except I shredded up two coolant hoses when it dropped 🥴 Makes me feel a whole lot better to hear that Justin Buice has done something similar!

[@EricVWgolf]

Don’t be embarrassed at all dude. It happens, people just speak about it. Props for standing up and being truthful about it to us 😀👍🏼

[@justinbuice]

Thanks I appreciate that!

[@anthonykotecki6587]

When my buddy and I were replacing my valve cover gasket, I asked him if all the bolts were removed from the cover and he said yes, we proceeded to pry up on the cover and it wasn’t budging, we thought this thing must have been held on by the grip of god so we grabbed a crow bar and went to town on the thing in which we cracked the cover pretty bad, in tears we then found there is a bolt hidden under the servo motor that he didn’t see on the left side of the motor. We took that one bolt out and the cover came off smoother then butter. That crow bar decision costed me 400 bucks and I dropped my buddy as a friend. Just kidding but from now on I treat my e90 as if it’s made of glass. Thanks for the awesome DIYs Justin!

[@justinbuice]

Dang that's terrible! I might have un-friended him too lol

[@endermanPlaysMC]

Keep up the good work. The quality of the videos is amazing! Oh, once I almost bent the OEM jack, because in the hurry I did not set it up like I should... I need one of those floor/rolling jacks.

[@justinbuice]

Thank you!

[@dwightwalls8658]

This exact same scenario just happened to me!!! Great vid!! Thank you 🙏

[@jasonmoreno245]

This is the best car channel no question 👍🏽

[@justinbuice]

Thanks I appreciate that!

[@roningaijin7701]

Feel your pain JB. Did the same thing except it was the rear and busted my camber arm. Luckily it was the OEM version cuz they're designed to take that hit without messing up the subframe. Great video, thanks for sharing.. these videos are the most helpful cuz it shows it happens to everyone. 👍

[@justinbuice]

Thanks! Just have to be more careful next time

[@cliftonrblandin6092]

Thank you for that,I have the e90 bmw 328xi and when ever I have a problem I look for your videos to see if I can fix it myself or see what needs to be done and how long it should take the BMW REPAIR SHOP TO FIX IT, ESPECIALLY AFTER THE SERVICE MAN TOLD ME BMW MEANS BRING MONEY WITH YOU

[@tvsamsung6396]

Thanks ;) At what coolant temp the fan should start working? and what coolant temp is normal? M47 engine E91.

[@ReindeerBork]

I did the same thing on my BMW except I was on the jack point at the time. The jack hit a rock and wouldn't roll forward making the car slip off the jack. my radiator cracked too, so I had to replace that as well.

[@justinbuice]

Dang that's too bad. I've also noticed if I'm lowering the car too quickly onto the jack stands, the car tends to want to roll backwards and knock the stands over, despite having the car in gear, e brake on, and chocks behind the wheels.

[@ReindeerBork]

I've noticed that as well, I bought ramps for mine so that for almost everything other than things involving taking the tires off I can use those.

[@whyzee125]

I had a MAF code on my 4Runner one time and figured I'd give some MAF cleaner a try before buying a new one. While I was at the parts store I happened to see the rustoleum aluminum colored paint that I'd read about being a perfect match for the 4Runners center caps and mine were peeling. I bought the paint and some MAF cleaner and pulled the MAF out as soon as I got home. I forgot to check which can I was using and sprayed my MAF liberally with the silver paint lol! Good news is, my MAF now matched the center caps perfectly! Haha! Needless to say, I bought a new MAF. Cheap mistake but embarassing.

[@paulewing1094]

Great video. I once added a qt of oil and forgot to put the oil cap back on. Big mess. I just ordered a new radiator and a bunch hoses from FCP Euro. Great prices and quick delivery. Keep up the great work.

[@justinbuice]

Thanks!

[@Motorsportsgeek]

i did the same.. crushed my ac condenser, luckily I got a really cheap stock used one locally and patched my plastic cover. I have since got a plate welded in the front so its much easier to lift it but since I try to jack it up on the sides just for safe measures.

[@cre8ivfun]

I’ve been with you since 12k and I am amazed at the quality of your videos. I hope soon ONCE you get over 100k or 200k you can go full time. Just a thought

[@justinbuice]

Glad to have you for so long! I'm hoping I can go full time but YouTUbe keeps screwing with my ad revenue and they have been demonetizing almost everything I upload. It's extremely frustrating since the channel is growing and getting views but the revenue doesn't add up

[@ketumiletlhako]

Was your radiator fan not running at all when the engine was on or? Mine isn’t working at all and I have a cracked leak on the radiator.

[@lovelysmoove7002]

How do you know if it’s a 3 prong or 4 prong for the fan assembly they are two different prices extremely big difference

[@akosimoknoy1213]

Your lucky it only damage your fan. I did the same embarrassing thing. Jacked up and miss a few milimiter. Car fell. Damaging my radiator fan ang upper hose. Replaced both and found out my crank pulley wobbles. Thought it was just a worn out pulley. So ended up buying a brand new set from fcpeuro (harmonic balancer, seal and bolt). Still same wobble. Only thing we can think of was probably a bent crankshaft. I ended up replacing my healthy 102k mile engine with a healthier 75k mile.

[@glendalassiter4054]

I know nothing about cars except how to turn the key, use the steering wheel, the brake and gas peddles, and work the windows! So when my dashboard sensor light for low tire pressure came on I was confused. It looked like a high-heel shoe on a brake peddle so I thought it was something wrong with my brakes! My son, Justin Buice, had a good laugh out of that one!

[@ericcorona7782]

What the name of that air duct piece. Mine is broken and I’ve been looking for it but I don’t know the name of the piece

[@armandobarros2871]

Can you do a radiator replacement can't find a video on it for e90

[@WonderfulFunCore]

couple months ago i was changing my exhaust manifold on my car and when i was putting back everything together i broke my alternator on the process by tightening one of the wire too tight on the alternator and broke one of the wires edge. actually it was my friend who told me, make sure its tight so, i made sure it was tight.

[@cathymunoz8420]

Any chance you can make a video of the jacking points on the 3 series and the proper procedure on jacking up your car?

[@robertcatterall438]

Can the radiator and fan be replaced as 1 unit?

[@NourHummadi]

dam that looks shot

[@justinbuice]

yeah I was hoping that it would just be the plastic frame which is a lot cheaper to replace but ended up needing the whole fan

[@dannyjr2804]

Keeping it real when I first got my bmw apparently a stop sign was crashed and so I didn’t stop and their was a huge dip that I took. Keep in mind it was dark and I wasn’t paying attention. Had to get the whole front bumper replaced and never would I unfocus on the road anymore

[@coryheat1025]

an indie shop broke my cooling fan doing the same thing , jacked up my car in the wrong spot. how can you hold them accountable if it breaks a while after the job was done.

[@brettgainfort2383]

Great video, super clear and awesome camera shots!

[@justinbuice]

Thanks! Glad I could help

[@AntoniPvP]

i used to work for a place where we made those fan engines and assembly the actual fan and the rest of the plastic. you should have reuse the 850 w engine and buy a fan and a shroud(plastic).

[@ciennagirl53]

I have to change the top radiator hose on my 2004 BMW 530 I. I'm not quite sure how did unconnect it yet and I have not came across the video

[@futbolycineparatontos7528]

Hi, didn´t you have to disconnect the gearbox cooler radiator in the lower part of the car? and the motor cover?

[@justinbuice]

No the only thing you have to disconnect is the wire that powers the fan

[@buckybarnes3803]

A little embarrassing: I was drifting for an hour in the snow storm last night. This morning when I started driving the car there's a wobble in the steering (wasn't there last night during drifting). My guess is that the Wheels got Caked Up and then froze and now are out of balance. Does this sound right, have you ever done that?

[@turboahdettusupra58]

Happens all.the.time here in finland, just let the car melt somewhere or clean em by yourself.

[@justinbuice]

That's happened to me before

[@buckybarnes3803]

Turboahdettu Supra thanks bro. I hooked up a hose to my basement hot water and cleaned the packed ice from my wheels. I bet you there was 25 lbs of ice on them. That worked!

[@Bmwguy2011]

My opinion? That’s tragic, but frankly, not altogether surprising. I had one coolant leak and in fixing it, entered a hose replacement - radiator replacement chapter from hades. It never ended, short of replacing nearly every hose in the cooling system and the coolant tank. You gently move or bend one hose out of the way to make room-and it breaks!! A brand new Rein hose failed, too. I lost 4 gallons of pentafrost, ruined my epoxy floor and finally hired a mechanic to replace the water pump and thermostat. These older e90’s’ hoses are so brittle that you can’t take them off at all. When my other car gets around the same age -12 years old or 170000 miles-I’ll just replace EVERY hose / radiator/ thermostat and water pump. Horrible ordeal!

[@darrelldozier1729]

Do not be embarrassed, I am a 25 year ASE master tech and recently placed my jack stands under my side steps on my Wrangler. They are very beefy but, no joy they bent up to the doors and the when they gave way. Luckily, I had just roll out from under.......UUUUGGGGHHH

[@DEX-dm7nt]

I jacked my girls civic up under the radiator lol. Afterwards I closed the hood and it wouldn’t latch, that’s when I realized what I did 😂 I was 15 and I had to call my uncle to help beat it back in place. That was a long time ago but I remember thinking her brothers were going to be pissed

[@justinbuice]

Damn! Id be embarassed for sure

[@torivarhaughom6525]

Can you do a video about how to change your halogen headlights ( all the lights) to led/hid?

[@justinbuice]

I don't have access to a car with halogens :(

[@haithamasokni6950]

Nicely done replacing it!

[@justinbuice]

Thanks!

[@DakaariDenton]

I love fcp euro . Get mostly all my parts for my bmw there . Great company and I’ve referred numerous amounts of people to them

[@justinbuice]

They are the best!

[@Bmwguy2011]

Have you guys tried bavauto or azautohaus or bimmerworld? I wonder how they compare.

[@joshmindek4840]

Most of my mistakes have been from tightening bolts a tad bit too much and then they snap. Always frustrating.

[@AllThingsG7]

That beat is 🔥🔥

[@justinbuice]

Jay Maldonado thanks! Im trying a new source for royalty free music

[@AllThingsG7]

Well keep it up bro and the videos i have a 2008 328xi coupe and you are helping me a lot!! I want to mod the hell out of it maybe u can help on tips... that website you gave definitely has cheaper prices!

[@rappintay936]

The cover picture for this video is hilarious

[@Chiliconcalle]

Hi me car is a bmw 325xi E90. I think me radiator fan have problems because always i shut down the engines , thar fan make sound

[@BamBam-xy8uz]

My cooling fan comes on when the car is cool and its really loud 2008 328i any suggestions?

[@justinbuice]

Use a scan tool that can read BMW specific codes and make sure that your electric waterpump is actually running. It’s common for them to fail, and the computer might be making the cooling fan come on to compensate. That’s my guess

[@nyikoluckyhendrickz]

Love ur videos men big upz can't wait to buy ma 1st car bmw of cos

[@justinbuice]

Thank you!

[@alexe903]

A few months ago I was changing some brake sensor in the rear of my 330i. I slipped the jack under the rear of the car and began to jack it up and I heard this metal crinkling sound, but just thought it was the suspension creaking. All of a sudden, the car drops a foot or so and the jack slips out and splits my bumper. Apparently, it slipped off the rear jacking point and completely destroyed my muffler and rear bumper. Guess that was a good excuse to go buy a performance exhaust system :-).

[@justinbuice]

Nice! did you get the new exhaust yet?

[@alexe903]

Justin Buice Yeah I picked one up used from an E90post member last month. It sounds amazing and I highly recommend getting one if you get the chance.

[@wiscowalleye7954]

Is it really just held in by one bolt!! I think my fan is going out since it’s getting really loud. Looks simple enough to do.

[@Bmwguy2011]

Jon Wise yes, but the side clips are what hold it in. Poor design again. I replaced my radiator and it was easy. The secret? Go to a pool place and buy hose grease. You can’t get the hoses on the radiator without it.

[@picklemetimbers3003]

Well done. I could tell it was super cold!

[@justinbuice]

Yes! Why cant this stuff happen when its 70

[@mirandafeulner1642]

Yesterday I went to the gas station because my car was seriously on E and after going inside to prepay I came out to pump my gas but the door to the tank was frozen shut. So after about 20 mins of being there and pouring hot water on the tank door, my boyfriend calls to make sure I'm okay. I told him it was frozen so he said he'd come help me. Right before he pulls up to the gas station I finally got it to pop open by pushing unlock on my key fob so I felt really bad he just drove there. He pulls up to my car and I told him I figured it out so he leaves. As he's waiting at the light near the gas station to go back home I get back into my car and it won't start. I called him back right away because I was worried he would have to jump my car and didn't want him going too far. As he is turning around I reach into my pocket and realize my key fob was in my pocket and not inserted into the car hence why it wasn't starting. He came back just for me to tell him once again that I figured it out. I was too embarrassed to tell him what really happened lmfao. One day I'll share it with him

[@jzallday102]

Miranda Feulner haha

[@MakeItRayne]

When I was working on my e90 335xi, I was replacing control arms. Instead of using removal tools you could buy cheap at harbor freight or even rent at AutoZone, I used a hammer instead. Because of that, I ended up destroying the cv boots on both sides trying to remove the control arms. The axles themselves were good and not making ugly noises but hemoraged all of the grease everywhere. I replaced the front axles cause of that -_-

[@justinbuice]

Dang! I had a cv boot fail a few months ago and yeah it's a huge mess!

[@davidsonagulefo1928]

I'm seriously considering getting a BMW but I have no idea where I can get good cheap parts from. Any help will be appreciated. I live in Michigan btw

[@Bmwguy2011]

You mean a junk yard? My humble advice? Once you start figuring out the repairs and incurring the hassle, you won’t want to put anything in the car but new or oem. The hassle factor is huge.

[@khushturna907]

Like the effects showing screws great video

[@justinbuice]

Thanks!

[@khushturna907]

Justin Buice what do u call that effect?

[@justinbuice]

In After Effects, it's called trim paths. I created an ellipse with a stroke and animated the trim paths. then masked the text to make it appear

[@need4speed162]

Love you JB...Keep'em coming

[@justinbuice]

❤️

[@iAlwaysSpeakTheTruth]

Justin keep an eye on your DISA Valves, how many miles are on it? Mine is pretty much shot but luckily the pin is in tight and didn’t fall out and grenade my engine but the entire unit is failing and there is a vacuum leak through the O-Ring as it is flattened out now, the genuine BMW part is almost $400! But super easy to do, I went aftermarket for $77 and good reviews on the part, but yeah once the car approaches close to 150k miles i would change the Valves even if they don’t look broken, because they will fail and I don’t want them to fail in your intake.

[@justinbuice]

I'll have to look into that. I only have 78k on mine right now though

[@amrizalds9108]

Why your fan got destroyed? Can you explain?

[@RicardoMartinez-we4vc]

Great job and thanks for sharing.

[@ez439]

Wondering how to replace thermastat housing

[@gfkBill]

Oldish vid (and good one) but I'll add this note for Auto transmission owners - you'll need to take the tray off from underneath, or at least release the front of it, as the ATF cooler is attached to the fan housing with a single T25 screw. Sorry Auto owners, you'll be getting the jack out :) Might be good to add to the description, Justin

[@thevernonposse]

Dude I was ready to loose it I’m screaming why didn’t mine come out like that

[@inapinkhotel]

Awesome video, Justin. Did you have to jack the car up and remove the plastic engine splash shield underneath the car first? About to do this same thing to my girlfriend's car this Sunday. Thanks again man

[@justinbuice]

You wont need to jack up the car for this. I replaced the splash gaurd a few weeks later

[@gfkBill]

@@justinbuice Unless you have an Auto! The ATF cooler is screwed to the fan housing down underneath, on the opposite corner from that top screw you removed, and will need to come out for Automatic owners.

[@alpinab14]

Hay justin , just a quick one but would love to hear your thoughts on the suspension change as in before and after as im going to be doing this in a month or two , thanks mate

[@justinbuice]

I'll be doing a review video shortly!

[@alpinab14]

Justin Buice awesome , thanks man

[@KozmikEl7]

Yeah dude watch the coolant hose, I replaced all of them some miles ago. they get heat brittle after sometime and fcp is the place where you can save$$$ :-)

[@justinbuice]

It was making me nervous the whole time!

[@thavershinnaidoo2619]

Can you show how to upgrade a 335i or 320i please

[@justinbuice]

upgrade what?

[@jameslawlor823]

We have ALL made mistakes, I make mine when someone is hovering over my shoulder.

[@justinbuice]

True!

[@anbanrassa8104]

Lesson learned and fixed.

[@shawntaylor9509]

Is this the same for the E90 LCI?

[@justinbuice]

Should be the same or at least very similar

[@leonardoflores4725]

I love everything about FCPeuro, just disappointed at the fact that they no longer price match.. lifetime warranty is great and all but I'm finding the exact same parts sold on FCPeuro for $40 less on competing websites.. I mean if you're doing wear and tear items like brakes and clutches then go FCP but if it's a long term purchase item like an auxillary cable for the radio.. if I find it on ecstuning for $30 cheaper and I won't ever need to replace it in my life again..

[@cereberum7866]

First time doing an oil change, trying to unscrew the oil filter i was turning it the wrong way. I even borrowe oil filter wrench from local mechanics shoo, eventually my neigbour whos a mechanic helped me to get it of. We had to put a chizzle throug it and then unscrew it. Fortunettly nothing got damged, exept for the oil filter, it looked like a doll that has been abused by the dog for 5 years

[@justinbuice]

Wow! One time I didn't put the cap on tight enough on my oil filter and a mile down the road the low oil warning light came on and it was pouring out of the cap, down the side of the engine

[@xxtheycallmeeli]

It happens and nice review !

[@justinbuice]

Thank you!

[@cre8ivfun]

I was changing my rims on my e30 and I cracked the brake caliper...

[@cre8ivfun]

Great video

[@justinbuice]

Thanks!

[@scotteramsey]

FCP does not have parts for 2017 BMWs. Maybe they will by the time my warranty is up.

[@justinbuice]

I'm sure they will get 2017 parts soon

[@dmiha0407]

I think you just replaced a brushless fan with brushed-one

[@ShiftedPerspective]

I'm still waiting on some snow drifts and donuts

[@justinbuice]

I'm waiting on some snow! everything is dry right now

[@lukafranjcic2634]

Are you going to do some performance mods? Btw wheels look soo good :)

[@justinbuice]

Just upgraded my suspension a few weeks ago. as far as the engine, I'll probably keep it stock and save the money toward the next car

[@justinbuice]

and thanks! :)

[@lukafranjcic2634]

Is it going to be bmw? :D

[@CMstorm2112]

What's the song at the end?

[@oscarcastorena3665]

Make a clock out of the older fan.

[@justinbuice]

Already threw it out :(

[@raqibakhtar3366]

Do you want to sell your old fan motor

[@TheIdiotBox257]

Did a similar thing when removing an leaky oil cooler in a hurry, threw a wood block under the car for safety and forgot about it, ended up lowering my 96 STi onto the wood block right under the oil pan. Oops.

[@justinbuice]

Dang! One time I changed my oil and poured the old oil back into the bottles to return to the store. I went inside the house to grab something and forgot the bottles were in front of the car and ran them over. Huge mess!

[@affordablepropertymaintena9213]

I literally lay on the ground every time to make sure I’m using a proper jacking point. Doesn’t matter if it’s raining or snowing lol. My car means too much to me to risk it like that.

[@justinbuice]

Wish I would have done that :/

[@anthonymaseki7617]

I drive an e34 that gap between the engine and fan you can park an e90 in there!!!

[@justinbuice]

yeah the e90 engine bay is pretty tight packaging!

[@Twir3d]

Don't worry my life is the biggest mistake.....

[@Bmwguy2011]

Mr Vegan I know the feeling, daily.

[@juniortupo]

Hi

[@justinbuice]

hey!

[@martinramirezmi5457]

i already had a hell of a time putting that damn fan in there, sucked lol.

[@AutOdometer]

ouch... could have been worse... could have been the radiator... close call

[@justinbuice]

Yup! I think the radiator is actually cheaper, but much more labor intensive to install. The fan was just over $500 but FCP helped me out a little since I've collaborated with them before

[@mjaycannon1]

Can’t believe this is a 1100$ job at the bmw dealership

[@Stancedude1]

Ecs tuning

[@franciscorubio4220]

Go to AutohausAZ.com or ecstuning.com to get oem or aftermarket parts for bmws. Good videos though bro👍🏼

[@DeonBroughton]

Song ??

[@justinbuice]

I'm not sure the name of it. I'm using a site called epidemic sound for my royalty free music now. it was in their hiphop section

[@DeonBroughton]

thanks so much man, i didn't think you would see this and reply, btw love you channel and videos they have helped me out so much !!

[@Aliusmi]

Sorry 😐!!!! Every day new things to learn....

[@justinbuice]

Could have been worse!

[@rvndyv3545]

Justin keeping it one hunnit

[@justinbuice]

Thanks!

[@zacharysuttle6753]

Yeah just don't show how to get it in oml FML.