Detachable Blades vs Magnetic Guards

A small video explaining the difference between Detachable blades and Plastic guards

[@curtishill9337]

I thank you for this tutorial because I could not figure out the conversion and I'm still working on cutting with them

[@henrypolo2597]

You're 100% correct about the sizing. I am slowly switching from guards to detachable blades at the shop, as they give a cleaner cut and fade. Will be ordering the 1 1/4, 1 3/4, and the 3/4, then I'll be set. Thank you!

[@Raymundosfadez]

This video really helped me out . Good looking and keep on choppin ⚔️

[@nathanbaker3319]

I have been using detachables for 12 years. Although the guard sizes may match the blade size, you also have to take in consideration the length of the blade under the guard as well. So the detachable blades always cut a little shorter.

[@kissme4492]

So True.

[@bybcj24]

Great video ‼️

[@leeanidoo638]

Can anyone please tell me which models use detachable blades, I find it to be much better than clip ons with the t outliner I want to use the detachable instead

[@infamous1ao]

Great video however, learned a lot. However I thing it's important to explain the difference with the lever open vs closed when using guards. Keep up the great work.

[@thelifeofbam6678]

Karl HK great point. Thank you

[@craigygeorge]

I use the 3- 3/4 blade daily, and despite what it says, it cuts more like a no2 guard, maybe slightly longer, but 100% doesn't cut to a no4 guard, I've just tried it on a fade, just to be sure, and after bulk removing with a no4 guard, I went over with a 3- 3/4 blade and it took a good amount off, I'm not quite sure why they label them wrong, or am I doing something wrong?

[@kissme4492]

You are 100% correct.

[@giovannigamers649]

Does the 19mm blade fit the andis bgrv

[@jessthebarber]

Where did you get your 1 3/4

[@allysonponce8699]

What about for the wahl guards??

[@formeitwastuesday.1515]

I fade my hair with 000 oster 76 clippers. when barber uses plastic whal guards and I ask for a 000 fade. It seem twice as long as the oster. My hair doesn't look good past 1 and half. I prefer my oster 76 but I can do a drop fade with it because its wide. I hade a couple of times where I did it but I was really tired trying to get it perfect. lol

[@lightshine6044]

Does Andis double magnetic guard fit Oster A5 clipper blade?

[@petesoebekti2022]

They fit on the a5 or classic 76 with the triple zero blade

[@woaxopbr]

Is there any plastic guards

[@imoneygarcia8210]

00000 DETACHABLE BLADE = TRIMMERS 000 DETACHABLE BLADE = ADJUSTABLE CLIPPERS CLOSED 0A DETACHABLE BLADE = ADJUSTABLE CLIPPERS HALFWAY OPEN (IN BETWEEN A 0 AND A 1/2) 1 DETACHABLE BLADE = ADJUSTABLES CLIPPERS ALL THE WAY OPEN (SO IT'S A 1/2 SO IT'S BASICALLY THE SAME THING AS YOUR 1/16 GUARD CLOSED) 1 1/4 DETACHABLE BLADE = 1/16 GUARD HALFWAY OPEN (IN BETWEEN A 1/2 AND A 1) 1A DETACHABLE BLADE = 1 GUARD CLOSED 1 1/2 DETACHABLE BLADE = 1 GUARD HALFWAY OPEN (IN BETWEEN A 1 AND A 1 1/2) 1 3/4 DETACHABLE BLADE = 1 1/2 GUARD CLOSED OR 1 GUARD OPEN 2 DETACHABLE BLADE = 2 GUARD CLOSED 2 3/4 DETACHABLE BLADE = 2 GUARD OPEN 3 1/2 DETACHABLE BLADE = 3 GUARD CLOSED 3 3/4 DETACHABLE BLADE = 4 GUARD CLOSED 5/8 DETACHABLE BLADE = 5 GUARD CLOSED 3/4 DETACHABLE BLADE = 6 GUARD CLOSED

[@user-lb8tz8nm1c]

Are you a barber?

[@imoneygarcia8210]

00000 BLADE = 1/125" = .2 MM 000 BLADE = 1/50" = .5 MM 0A BLADE = 3/64"/1/32" = 1.2 MM 1 BLADE = 3/32"/1/16" = 2.4 MM 1 1/4 BLADE = 5/64"/3/32" = 2.8 MM 1A BLADE = 1/8" = 3.2 MM 1 1/2 BLADE = 5/32" = 4 MM 1 3/4 BLADE = 3/16" = 4.8 MM 2 BLADE = 1/4" = 6.3 MM 2 3/4 BLADE = 5/16" = 7.9 MM 3 1/2 BLADE = 3/8" = 9.5 MM 3 3/4 BLADE = 1/2" = 13 MM 5/8 BLADE = 5/8" = 16 MM 3/4 BLADE = 3/4' = 19 MM

[@AllSoWavyReese]

That messed up blade a 3 1/2 not 3 lol

[@IM_AGENTSOLIDER.EXE10.9M-12M]

Nah IDGAF we using clipper blade system not plastic guard system