*DETAILED* Front Brake pads & Rotors Accord (2008-2017)

[@Striker50_]

All Items & Brakes I used for my (2013-2017) Honda Accord on my affiliate Amazon Storefront: www.amazon.com/shop/striker50/list/1GQO7BKQEEC6D?ref_=aip_sf_list_spv_ofs_mixed_d

[@jeramybearamy8539]

I just did my front pads and rotors prior to watching this video. The torque specs I came across were: Front Caliper retaining bolts - 14mm - 30 ft lbs Front Caliper bracket bolts - 17mm - 80 ft lbs Wheel lug nuts - 19mm - 80 ft lbs For those having trouble with the cross-pattern rotor retention screw: that screw uses a #3 JIS screwdriver or hex bit. A#3 FLAT ENDED phillips bit will work in a pinch. A standard phillips screwdriver might strip the screw if it’s being stubborn.

[@yasmenebadereldin]

I have an accord! This is so clear, makes me think I can do this too 😎

[@Striker50_]

Do you actually? ☠️☠️☠️

[@yasmenebadereldin]

@@Striker50_ yes it’s a great car 👌🏻

[@erabbit777]

I had that same noise and determined it was coming from the rear using the E brake while reversing

[@Striker50_]

Nope! Always frustrating not knowing where it's coming from

[@erabbit777]

Great video BTW. Saved me a lot of time

[@Striker50_]

@@erabbit777 Thanks! Yes very easy to lose time in the little details. I for example added the screw in the wrong hole and that added 35 minutes to the process

[@masteru7104]

Seems like you forgot the spring clip - that spreads the pads

[@Striker50_]

Thanks for taking the time to reach out The front pads don't have spring clips, but the rear pads do

[@hlantuj331]

Good job

[@Striker50_]

Thanks!

[@masteru7104]

The squeal is due to the missing spring clip

[@Striker50_]

Thanks for sharing! If you watch the full video it ended up being the rear brakes that needed to be replaced. It still squealed after I was done with the front

[@rameshkumarp6845]

Hi, Can you share the front rotor and brake pads list in amazon. I don’t see that in the amazon list

[@Striker50_]

www.amazon.com/shop/striker50/list/1GQO7BKQEEC6D?ref_=cm_sw_r_cp_ud_aipsflist_aipsfstriker50_63MYBYBKA2T96M452J8W

[@Striker50_]

I added the front brakes & Rotors. I recommend the Bosch set, and rotors, or the painted hat rotors

[@shaquillecoleman226]

On your rear brakes video you used Bosch brake pads but on the front you used wagner brake pads. Was there a reason for that?

[@Striker50_]

Nope, just whatever came up on Amazon with decent reviews. Sometimes it's hard to find the matching set on the Internet so I just go with what's convenient

[@roniarad6030]

I have same problem with that black rubber ring that you got rid of at the bottom gliding pin. Did you notice anything after taking it off or do I need to buy new once?

[@Striker50_]

I've noticed no issues whatsoever. I heard it helps with vibration but everything feels the same@@roniarad6030

[@roniarad6030]

@@Striker50_ thank you

[@Striker50_]

Anytime, thanks for taking the time to reach out @@roniarad6030

[@easye1311]

3 ton or 2 ton jack stands?

[@Striker50_]

2 tons should be fine since this car weighs like 3600 LBS and you're not supporting 100% of the weight. Doesn't hurt to get 3 ton in case you have other cars