I don't understand why anyone would give your video a thumbs down. You cover every aspect of the tool and keep it entertaining. I think you've got trolls or it's a competitor. Makes no sense man. Thanks for putting in the time and for being thorough.
@BruceAlanR3 жыл бұрын
You’re very welcome! And thank you for the kind words. I try to educate and entertain, so perhaps some folks don’t get my sense of humor. Cheers and Happy holidays!
@shermananderson7002 жыл бұрын
Billy, I’ve many chain saws since 1991, approximately 30 saws different makes. A thorough video would be one that takes you through all the maintenance needs especially for us who live in small towns far away from big cities. My largest saws are STIHL O66 Magnum, Echo CS8000 and STIHL Ms460.
@LightGesture2 жыл бұрын
Milwaukee fans coming in hot
@BruceAlanR2 жыл бұрын
LOL
@JChris139 Жыл бұрын
Maybe time annoying sound effects 😕
@101greasemonkey58 ай бұрын
I have this saw, works well but leaks bar oil when stored in the upright position. I've discovered if you store the saw on the bar side with the oil fill cap up it doesn't leak. Adding an O-ring to the cap does not help, the leak is on the inside of the fill spout to case seal. Some people take it apart and add sealer to the gasket, I don't feel I should have to disassemble a brand new saw so for now anyway I'll just store it on it's side. Thanks for the video
@BruceAlanR8 ай бұрын
I agree about the oil leaking when stored. I try to get as much out as possible before I put the saw away.
@Far2hipАй бұрын
Same here. I store mine on its side. The leak has actually become less after a lot of use. 😎
@morrismonet35549 ай бұрын
I have a Husqvarna 455 for tree cutting, but for around the yard or on my trails I was always using a hand saw for one or two annoying low limbs. Just bought one of these to make my life easier.
@BruceAlanR9 ай бұрын
It’s good for around the yard. I just took a few large limbs down the other day. More firewood!
@shadowmosez18043 жыл бұрын
Thank you for this video my guy for the life of me I couldn't figure out why my brand new saw wasn't working, it was because I didn't know about the kick back guard needing to be pushed back.
@BruceAlanR3 жыл бұрын
Ah yes! Glad the video was helpful.
@theweekendadventurer2 жыл бұрын
@@BruceAlanR 😂😂😂😂😂
@rregan6494 Жыл бұрын
Hahaha ! Me too this is why I came here .
@BruceAlanR Жыл бұрын
Glad it worked out! Reminds me of the time I returned a DeWalt combo kit… the batteries wouldn’t charge… I got another kit and it turned out I wasn’t pushing them in hard enough. 😁
@MMMLandscapeAndDesign2 ай бұрын
it’s called a chain brake…people like you shouldn’t own a chainsaw. Have fun at the ER!
@rkt884038 ай бұрын
I just acquired this saw with 5Ah battery. I have two corded electric chainsaws, a 16" and a 10" pole saw. I had a few gas powered units before, but with infrequent use, they were a pita sometimes. Looking forward to giving this a try. BTW, great vid post.
@BruceAlanR8 ай бұрын
😃👍
@chiponeal85823 жыл бұрын
Good video. I have had this model for a couple years now. Very interesting 14' bar mod that could be done. A little google fo will show the part numbers and such.
@BruceAlanR3 жыл бұрын
I’ve seen that mod and considered it; however, I wouldn’t do it until the saw is out of warranty. Any mod will void the warranty.
@WorldwideRealityVideos2 жыл бұрын
I just bought this. Having operated chainsaws for several years, there are a couple things that bugged me. The bar oil cap was SO hard to twist that I almost broke it. The saw is so light that it is quite jumpy. Overall, I think it is a good tool for light duty trimming around the around the house but not for serious cutting.
@BruceAlanR2 жыл бұрын
Thanks for sharing your thoughts. I agree it’s best for light trimming around the house.
@RG7692 жыл бұрын
I thought of the bar oil cap was very hard until I saw it has to counterclockwise it was quite hard to push to open it ...instructions are tiny and very hard to read
@BruceAlanR2 жыл бұрын
I do the old trick of putting a little oil on the gasket to keep it lubricated.
@truthisweareallgonnadie. Жыл бұрын
I've cut at least 4 8 to 10inch trees around my house 1 was dead 1 was leaning towards my building the other was a pine tree I would say it was a good 12 to 14 inches it cut all them down with 0 problems. But I'm about to get the bigger 20inch Dcs677 saw soon that thing is a beast!
@Far2hipАй бұрын
Feel bad for the folks that had a crap experience with this saw. I beat the sh*t out of mine and I’ve had no issues with it. Well, aside from replacing the chain 4 times. Yeah, I definitely work the hell out of it regularly and it’s a little beast. 👍🏻😎👍🏻
@BruceAlanRАй бұрын
Thanks for sharing your experience!
@57Pad Жыл бұрын
Great video . That was one of the best I ever seen I think you help made up my mind on what saw to get the 20v DCCS620 because the 8.8 lb easy to move around and I am old so when the battery is done so will I be done we will make a good team lol my son got the milwaukee 2727-20 it a great saw but it 15 lb I think with battery not shore about the weight but a lot heavier to know in my time I use a lot of chainsaw one time the bigger the better but that changed know smaller for me I love all chainsaw because when I was younger I bilt a 40' x 16" long liner fishing boat with a chainsaw an a axe squared all the trees with the chainsaw in the woods so I could make them light enouf to bring them home on a skidoo and slay every every Pease of timber and beam was cut squared in woods even most of the planks I fish that boat of shore over 100 mils that boat is still in the fishery today bilt with a chain saw the hardest Pease to get was the stem and the keel it was done just my brother an me back in the Earley 1980 l had not much money but I had a enough to get a chainsaw it was a Mcculloch Pro Mac 10 10 that put me on my feat love chainsaw thanks for the nice video staysafe
@BruceAlanR Жыл бұрын
Thanks for the kind words and for sharing that great story!
@vijendersinghnaryal81992 жыл бұрын
Great video, I am having trouble starting it. It is the same model and I am using 5Ah battery. I did pulled back the break, as well as pressed the safety switch but still no response. Appreciate your inputs
@BruceAlanR2 жыл бұрын
Hmmm. Sounds like it should be serviced or returned. Sorry I don’t have a better solution.
@shermananderson7002 жыл бұрын
Hold the side safety button while holding the trigger. When my saw's battery gets low it will stop in the cutting process so I change batteries. I'm thinking of getting a 60V Flex battery
@hotbusa086 ай бұрын
Great review very informative
@BruceAlanR6 ай бұрын
Glad it was helpful!
@MatthewPainter3 жыл бұрын
Not trying to be a jerk, but that test at 4:00… either that chain is super dull or it’s on backwards. I have the same saw and with a sharp chain it’ll pull pretty hard. Plenty of torque. Also, the 14” bar mod makes it a different machine. Look at the Woodland Pro ArborMax Lite combo from Bailey’s Online. It’s like $34 and awesome.
@BruceAlanR3 жыл бұрын
Great info. I’ve been considering the 14” bar mod. Thanks! 👍
@alexgarcia39002 жыл бұрын
Yeah I have the same chainsaw and it cuts way faster than that.
@BruceAlanR2 жыл бұрын
Yes, strangely I was using the saw last week to cut off the bottom of Christmas trees and it was zipping through like butter. The wood I used in the video had been seasoning for a year.
@user-fj6qq2vm7c2 жыл бұрын
Hard to take him seriously about a chainsaw when he has no head 😐
@BruceAlanR2 жыл бұрын
Can't argue with that. Thanks for the feedback.
@ictdpowerstroke4591 Жыл бұрын
I love the vid ,,I have the exact chainsaw,,the only difference is I use a 60v 9amp batter aka just a bigger battery
@BruceAlanR Жыл бұрын
Thanks for the kind words. I'm guessing you use a 9Ah flex volt battery since it's a 20V tool correct?
@ictdpowerstroke4591 Жыл бұрын
@@BruceAlanR correct,,I need to sharpen my blades though,you heard me right,,blades,,one for females and two for the saw,,have a good one.God bless
@Geeeeee232 жыл бұрын
Thanks Bruce very informative. Great video.
@BruceAlanR2 жыл бұрын
Thanks for the kind words. I’m glad the video was helpful.
@silverfox__122 жыл бұрын
Fill gage is not to fill the oil, you should always fill to the top. The gauge is just so you can see where u are at during operation which will be upright and not on its side.
@BruceAlanR2 жыл бұрын
Good to know! Thanks!
@jpcash1942 Жыл бұрын
Hi , Thank you for helping me with your tutorial video , I have a little question about what kind of Oil do I have to use , May you please let me know about ? l will appreciate your help , Thank you again
@BruceAlanR Жыл бұрын
Any product marked as “Bar and Chain oil” will do.
@lcdubs7847 Жыл бұрын
I have the exact same saw. I just had to return it to Home Depot after about a month of ownership because it quit. Would not run for more than a second or two even with a fresh battery. The new one works well, after an hour of cutting. I hope it stays that way!
@BruceAlanR Жыл бұрын
Ugh! Mine is still working well thank goodness!
@chriskeiffer586127 күн бұрын
So are you still liking it? Thinking bout getting one
@BruceAlanR26 күн бұрын
I still like it although sometimes I get lazy and grab the recip saw. 🤣
@paullastnamehere3295 Жыл бұрын
Thank you for this review. I was hesitant in buying an electric chainsaw and after watching this review, I will stick with 2 stroke powered chainsaws.
@BruceAlanR Жыл бұрын
Glad I could help!
@matttracey4552 жыл бұрын
Your supposed to let the piece of wood fall so it doesn't bind up. When u cut it between the 2 cinder blocks it pinches the blade...
@BruceAlanR2 жыл бұрын
Makes sense! Thanks!
@alexdetcheverry24302 жыл бұрын
The oil cap requires a O-ring to prevent any leaks Their's a groove on the cap itself for the ring to go.
@BruceAlanR2 жыл бұрын
Good to know. Thanks!
@lcdubs7847 Жыл бұрын
The oil sight window is not there for when you're filling, it's there for when you're using it. With a gas powered saw, you fill the oil when you run out of gas, but with a battery powered saw, the window is there to help you remember to add oil.
@BruceAlanR Жыл бұрын
Good to know thanks!
@tomgreen17213 жыл бұрын
Dude is your chain on backward ?
@BruceAlanR3 жыл бұрын
Ha! You would think at the rate this thing cuts.
@shermananderson7002 жыл бұрын
Something is haywire in this video. That saw, given its chain is sharp, should cut those logs and 6x6"much faster.
@BruceAlanR2 жыл бұрын
I hear ya. I’ll have to get a new chain and see if it makes a difference.
@jjoleboy3 ай бұрын
@@BruceAlanRYour battery is weak. That's why you noticed a big change from 1 cut to the next. My 5 amp hour batteries will make 20 cuts like you did and will barely drain down 1 bar. Some Dewalt batteries won't last near as long as others just like them. This is a common thing with battery powered tools unfortunately. Always test the new tool with a known strong battery first.
@BruceAlanR3 ай бұрын
@@jjoleboy Great advice and info! At the time of the video I was using batteries that had a fair number of charge cycles. I’ve recently been doing a lot of research on batteries and have opened a few older packs to test for unbalanced cell banks, check cell capacity, and all that fun stuff. The BMS systems in these packs are OK, but cell degradation does happen faster when the packs are used in the higher drawing tools.
@jackoneil75723 жыл бұрын
I want to get my hubby one of these after the holidays. How much did it cost on sale? I see that it's currently $179 online at home depot.
@BruceAlanR3 жыл бұрын
I purchased this in November at my local Home Depot for $99. I couldn’t believe the price which is why I didn’t hesitate. It will likely go on sale again so keep an eye out. Happy holidays!
@jackoneil75723 жыл бұрын
@@BruceAlanR That's a great price. I'll keep an eye out for the next sale. Thank you and happy holidays to you too.
@BruceAlanR3 жыл бұрын
Thanks!
@stans52703 жыл бұрын
@@jackoneil7572 FYI Acme Tools [online] has this for $149 [+6.49 shipping] but you get a free 5Amp battery [normally $79].
@chrisbowers3103 жыл бұрын
$75
@nsmturbo59023 жыл бұрын
I have the 8" pole saw and it seems to cut faster and better than this 12" chainsaw. Thanks for the vid I was going to purchase this but I'm going to pass.
@BruceAlanR3 жыл бұрын
That’s great info. I’ll have to check out the pole saw. Thanks!
@jeeves7442 жыл бұрын
I have the pole saw also and would agree with that. I am wondering if they are putting a less agressive chain on the 12" to prevent kick back.
@BruceAlanR2 жыл бұрын
I’ve considered getting a new chain. That may be why it cuts so slow.
@jeeves7442 жыл бұрын
@@BruceAlanR if you do get a new chain please do a update video.
@BruceAlanR2 жыл бұрын
Will do!
@brennabiesbrouck51993 жыл бұрын
Question my chain came off. Cant figure out where it goes. It it under the sprocket or what hard to tell by picture
@BruceAlanR2 жыл бұрын
Sorry for the delayed reply. It goes around the sprocket. Freeze frame it here at 2:38: kzbin.info/www/bejne/fIqwg62wgL2spZo
@greart672 жыл бұрын
Hello excellent video, but I have a question. I have 12 DEWALT tools that I bought with DCB606 batteries, now I want to buy this chainsaw to cut small trees in my yard, but according to home depot they say that I cannot use the batteries that I have because it will burn the motor, as it suggests that these are Models DCB205, DCB205G, DCB205CK or DCB205-2 What do you recommend in this regard, it is true that it would burn the motor or if I can use my batteries. Thank you
@BruceAlanR2 жыл бұрын
Great question! I’m going to call DeWalt’s 800 number and get back to you on this. The manual doesn’t specify which batteries can be used and this tool is considered part of the 20V Max system, which boasts being able to use any 20V max battery (even though it’s more like 18V). Just thinking aloud, Ah is not a measure of power, but a measure of charge/run time, but how batteries are wired (series vs. parallel) impacts power. If I recall correctly, both 5.0 and 6.0Ah batteries are two or three rows of cells wired in parallel so there would be no change in voltage, just more Ah/runtime. If you were going from a 2.0Ah battery, which is wired in series (in which case you’d add up the voltage of each cell in the pack), to a 5.0Ah wired in parallel (in which voltage doesn’t get added up), you’d see an increase in power because there are more cells doing less work. Anyway, I’ll get back to you once I hear from DeWalt.
@greart672 жыл бұрын
@@BruceAlanR thanks for your help but I do a mistake the battery that I have the models are DCB606, if you have some news please let me know, thanks again
@BruceAlanR2 жыл бұрын
DCB606 is a 6.0Ah flexvolt which has more cells in it than say a DCB206. Either way, I confirmed with a nice woman at DeWalt (“Ana”) that there is no restriction on batteries for this saw and the DCB606 flexvolt is OK to use. That makes sense to me but I’m not a tool manufacturer. 😀 Thinking aloud again, Flexvolt switches from parallel to series to change voltage (you add voltage of cells in series and do not add voltage when cells are in parallel- that’s how it switches between 20V and 60V). Anyway, the 20 volts wouldn’t be the concern. The flexvolt has more cells inside (I believe there are fifteen 18650 cells). For comparison a DCB206 6.0Ah XR battery has ten 21700 cells. That would mean the cells in the flexvolt aren’t working as hard and would provide a little more power. Is that bad for the tool? The verdict is still out. I’ve heard of tools burning out when using a flexvolt battery; however, was it due to using a flexvolt battery? DeWalt hasn’t admitted to anything if it is and stands by their products. Take comfort in the fact that the tool has a 3 year warranty so if your flexvolt batteries are the issue, you’re covered.
@greart672 жыл бұрын
@@BruceAlanR Thank you very much for explaining in detail the conversation you had with Ana, then I can safely use my DCB606 batteries, without any problem or concern that the motor will burn out, you mention that the tool has a 3-year guarantee but what happens if, for example, the motor burns out and dewalt says it was from using FLEXVOLT LITHIUM ION 20V/60V batteries==(MAX) 6.0 Ah/2.0Ah, thanks again for your attention regarding my questions
@BruceAlanR2 жыл бұрын
I don’t think DeWalt would give you an issue, but if they did you can say you consulted the manual, which doesn’t specify which battery to use or mention any restriction on 20V max batteries that can be used… and that includes the flexvolt line. I’ve had positive experiences with DeWalt’s customer service in the past. I didn’t think the fence of my table saw was straight so I called with the part number and they sent me a new one.
@stvsanders3 ай бұрын
What file size does it use? 4.0 mm?
@BruceAlanR3 ай бұрын
I’m pretty sure it’s a 4.5 mm.
@yalathary Жыл бұрын
Great work
@BruceAlanR Жыл бұрын
Thank you!
@nateplayz98569 ай бұрын
What is your recommended of oil for it and is it in auto zone
@BruceAlanR9 ай бұрын
Any oil labeled as bar and chain oil should be fine. I use ECHO bar and chain oil, but I don’t think you’ll find it at AutoZone.
@lisamcdski12 жыл бұрын
I need to know how to tighten a loose chain
@BruceAlanR2 жыл бұрын
Adjust the chain tension knob (1:09) in the video.
@raymondherbst71262 жыл бұрын
The chain brake has to be Back for saw to operate, Not Forward. The brake being forward means brake is engaged as when a kickback occurs and saw shuts down. I doubt if kickback will ever happen with this low power limb cutter.
@BruceAlanR2 жыл бұрын
Thanks for sharing that. I haven’t experienced any kickback so far.
@LightGesture2 жыл бұрын
Does it have a variable speed trigger, though?
@BruceAlanR2 жыл бұрын
It has a trigger, but it’s not really variable speed. It’s more like on or off.
@RangerDanger112 жыл бұрын
If it’s sharpened properly it will cut good
@BruceAlanR2 жыл бұрын
Thanks for the feedback. It was a brand new chain for the video. I wonder if it would cut faster with a flexvolt battery attached. Not even sure it would fit, it I may try it.
@mattwaters69872 жыл бұрын
Cool video!
@BruceAlanR2 жыл бұрын
Thanks you! Cheers!
@corridosfelones Жыл бұрын
I really wanna see how good they are I wanna see it get forced to use cutting 1 time
@BruceAlanR Жыл бұрын
Fair enough!
@tonyj34633 жыл бұрын
I could cut faster with a hand saw glad I seen this video so I know not to buy one
@BruceAlanR3 жыл бұрын
Excellent! I mainly do reviews to share my experiences with tools I buy. I try not to recommend products as I’d feel terrible if someone got them on my account and then didn’t like it. Luckily, DeWalt has the 30 day guarantee so you can try it and return it if you don’t like it.
@theweekendadventurer2 жыл бұрын
Yeaaaa I doubt that….
@BruceAlanR2 жыл бұрын
He’s got a wicked sharp hand saw and biceps like the hulk. 😃
@davidaguirre97982 жыл бұрын
Que aceite le pongo?
@BruceAlanR2 жыл бұрын
Yo uso aceite de cadena y barra Stihl
@dennisthemenace572 жыл бұрын
That chain is dull. And only 4 sharpenings? That is not much work
@BruceAlanR2 жыл бұрын
Fair enough. Thanks for sharing your thoughts.
@tskipwadoo3447 Жыл бұрын
Obviously it’s not as fast as a motor operated saw.
@BruceAlanR Жыл бұрын
Thanks for sharing that!
@truthisweareallgonnadie. Жыл бұрын
Of course it isn't it's dewalts smaller saw. Dewalt released a much bigger saw called the dewalt dccs677 that thing with a 5ah battery is a beast and just as fast or faster than a mid range stihl.
@gconstancio33Ай бұрын
Ok...so it's not just me. This chainsaw is weak.
@BruceAlanRАй бұрын
One user said my 5 Ah batteries were old and that his chainsaw rips through logs; however, my batteries aren’t old so I can only assume I’m the problem. 🤣 In doing some research, it may be that the XR 5Ah battery isn’t the best fit for the chainsaw. May require a more powerful battery for better performance. A bigger battery doesn’t mean it provides more power, just more run time. I’m going to do some testing.
@paulkovacic36862 жыл бұрын
How can anyone take this video seriously when the chain is on backwards.
@BruceAlanR2 жыл бұрын
HA! Well that might explain a few things.
@jcclark770 Жыл бұрын
Looks like very slow to cut
@BruceAlanR Жыл бұрын
Yes, it’s definitely not as powerful as gas. I was using my neighbor’s gas saw the other day, and it’s no comparison.
@terrycalvert7812 Жыл бұрын
Omg this is painful to watch!!! I have this saw and it will rip through a 6x6 in one tenth the time this guy is taking!! Uggghhh good thing you bought the dewalt to practice with a gas saw would eat him up!!
@BruceAlanR Жыл бұрын
Ha! Thanks for sharing your thoughts and experiences.
@jamesohara91522 ай бұрын
This saw is a real piece of Shite. I got one and it worked for about 40 minutes altogether and stopped working. The brake trigger switch was faulty and it was a nightmare to fix. From looking up how to fix it , i discovered it is a common problem with these saws. So had to send it back to DeWalt to fix and return it took months. And then it happened again same issue.
@BruceAlanR2 ай бұрын
Ugh! Thank you for sharing your experience. That sucks that it takes DeWalt that long to turn around a repair. I recently had to send one of my Milwaukee tools back for service and they had it back to me within a week… although, they ultimately assessed it and sent me a brand new tool instead of repairing it.
@teacherguy50843 ай бұрын
I had one of these and it quit 4 years later after about 15 hours of runtime. Garbage. Don't buy.
@BruceAlanR3 ай бұрын
Yikes! Thanks for sharing your experience.
@robertlee6409 Жыл бұрын
I know this is 2 years late but, does the 6A 12V battery fit this saw? I'd hate to invest in the 60V system if i don't have too. Thank you in advance.
@BruceAlanR Жыл бұрын
It will only accept 20V max batteries although it would likely work with a 20V/60V flexvolt battery. It don’t think it would work with the 12v.
@Pmedic60511 ай бұрын
Get yourself a hockey mask and go Jason on all the kids at Camp Wobegone,
@BruceAlanR11 ай бұрын
Ha! Good idea for Halloween although I think if I was wielding this little chainsaw I’d just get a few laughs.