Allen wrench is to remove the nut that holds the discs on. Look at the nut close!
@SteveRobReviews5 жыл бұрын
Steve I just went out in the shop to re-check. Nope the disk holder has 4 holes in it for the disk removal tool and that's it no allen anywhere.
@stevecampbell21245 жыл бұрын
The 4 holes are 6 sided for the Allen wrench to fit into one hole to remove the nut. I use the Allen wrench daily to remove the nut.
@stevecampbell21245 жыл бұрын
You must have a old old style nut. My Allen wrench fits in one hole to remove the nut. Send email address and I’ll send you pictures of it. That’s how they are shipped to Idaho. Corded grinders are the same also.
@SteveRobReviews5 жыл бұрын
Ok I went out to the shop and put it on the workbench and got my flashlight. OMG your so correct and I did not see it until I looked real close. LOL I posted it on my instagram and mentioned you for helping me. Thanks Steve that was awesome of you for taking the time and helping me figure out the allen wrench mystery.
@ritterjon5 жыл бұрын
STEVE ROB REVIEWS This is hilarious!!! Glad you figured it out.. 😂😂😂
@schm1472 жыл бұрын
Kudos for responding to comments 3 years later. I just got this grinder on sale for only $60 and I'm glad to know it will do the job
@SteveRobReviews2 жыл бұрын
I've used mine a lot and it's still awesome. 👍
@davidbennett50202 жыл бұрын
Hello Steve. The Allen key is used to tighten up the disk instead of using the usual grinder tool/wrench. Insert the Allen key in one hole and hold the locking switch and tighten or loosen the disk. Thanks for your review. Just bought this grinder after watching you. Thanks again
@SteveRobReviews2 жыл бұрын
Thanks Dave much appreciate the feedback 👍
@themechanic61175 жыл бұрын
I have the milwaukee brushless one and its a beast. Saved my bacon. So many times. Its a must have tool! ...oh,the Allen wrench is so you can steal the disks off your old grinders 👍😁
@SteveRobReviews5 жыл бұрын
Isn't that strange putting the allen wrench in there just to drive me crazy :)
@andrewbird99384 жыл бұрын
The Allan key is for removing the disc, it goes in one of the holes on the lock nut
@Las_cacas4 жыл бұрын
Love reading the comments, learn so many safety tips. I'm new to owning several power tools and I'm finding out that I've been very lucky to not have gotten myself hurt.
@SteveRobReviews4 жыл бұрын
Safety first and fun building projects forever. Cheers
@rustyj404 жыл бұрын
I am looking at buying this grinder. I already have several other DeWalt tools that use the 20v battery. Thanks for the real world tests and the feedback! Keep it up!
@SteveRobReviews4 жыл бұрын
I have used this grinder a lot and its terrific. Thanks Rusty
@emmarowley10963 жыл бұрын
Your review made me buy this grinder !!! Thank you for your honest review. I bought this grinder second hand as I have 12 bolts to chop off a trailer frame and I didn’t want to be paying for a brand new brushless grinder because I honestly don’t think I will need to use it much or ever again but handy to have and I didn’t want to buy a corded one. The last year I have bought a few brushless cordless tools but as you know once you have a couple of batteries then it’s easier to buy the bare tools. I have a knockoff 6ah battery the two “compact” 3ah batteries with 21700 cells and a 2ah battery. I now own a 894 impact wrench, compact reciprocating saw, hammer drill and the air compressor and next week angle grinder will be delivered. And I can see me buying the oscillating multi tool …. Never thought I would have a power tool collection and what a difference they have made, makes tasks so much easier and safer without a cord dangling. Thanks again fella 😊.
@SteveRobReviews3 жыл бұрын
Thank You for such nice feedback .
@arkansasrazorback608711 ай бұрын
I was wondering why mine didn't come with a pin wrench either. I thought they were circles, as well. Not hex holes. I bought mine since it was cheap for Black Friday. Good review.
@SteveRobReviews11 ай бұрын
Thanks much appreciated 👍
@HopkinsChannel4 жыл бұрын
Glad I saw the video. I got stumped on the Allen wrench dilemma too. Read the manual 3 times. Looked at the box. Dumbfounded. The comments in your post saved the day.
@ericlawrence22754 жыл бұрын
Thanks for the comments about the allen wrench. I've had this grinder for almost a year now. I went to change the disk and figured I lost the tool and kept pushing aside this allen in my drawer while looking all over for what is not there. After all that, now I won't forget what that allen is actually for.
@gillescayouette5665 жыл бұрын
Thank you Steve, I did find an ajustable one on Amazon, Thank you so much, I will be able to get my grinder going again
@thistruckerslife4 жыл бұрын
got this works fine , reading the instruction tells you what the tool is for and how to use it
@SteveRobReviews4 жыл бұрын
I cant read french instructions:)
@thistruckerslife4 жыл бұрын
STEVE ROB REVIEWS I on,y speak American so I google translate from English.
@reginalb1244 жыл бұрын
@@thistruckerslife Or just download it in English...
@ifster7273 Жыл бұрын
Just bought it after watching a part of your video. I also have the saw and it's great. If the grinder is equal to that, then I'm sure it'll be great also. Thanks.
@SteveRobReviews Жыл бұрын
👍
@ifster7273 Жыл бұрын
Actually, it was your mention of the saw that sold me. I haven't used any of my corded saws since the day I got the cordless.
@lonniechartrand2 жыл бұрын
I know this vid is several years old, but that hex wrench IS FOR THE SPINDLE NUT!!! It fits into one of the two holes in the nut.
@SteveRobReviews2 жыл бұрын
Never too late buddy for other to see. Thanks 👍
@sincerelovechild3 жыл бұрын
There are four holes is the wheel lock nut. Two of those holes are hex shaped at the same size of the Allen wrench
@SteveRobReviews3 жыл бұрын
👍
@PinetreeLine5 жыл бұрын
Great deal Buddy! Today’s cordless technology is off the charts good compared to years ago! Thanks!
@SteveRobReviews5 жыл бұрын
Yes years ago I tried a cordless grinder and could stall it out so easily but this one no way. Cheers
@Crusty_Otter2 жыл бұрын
Great review! I bought the Dewalt corded DWE402W (4½", 11amp) grinder last Summer and it's been great - if I'm working near an outlet. I'm in the middle of replacing 40 year old cedar fence posts with metal T-posts on a 10 acre lot and REALLY need a cordless grinder to cut off some posts that bottomed out on rock. I was looking at the 412B the other day, they're $129 at Lowe's now, just wasn't sure if it had enough power for the job. Think I'll pick one up in the next few days, you're review was just what I needed to know.
@SteveRobReviews2 жыл бұрын
Thanks , yes it's got tons of power . 👍
@tinman19552 жыл бұрын
$135 at Lowe's today - late June 2022.
@MuckyWaters Жыл бұрын
If you are watching this and plan to use the grinder a lot you might want to spend a bit more and get one of the XR series Dewalt grinders that has the brushless motors and a brake for rapidly stopping the blade after you release the trigger.
@saltyolbroad2962 Жыл бұрын
You seem to be agrinding kind o person: how do I know what discs fit? It only goes 8k and it's a type 27. It's the one in this video but nothing seems to fit and I've never really used one so I don't know how to assess what will fit and won't.
@TexasMan-oz8klАй бұрын
From Amazon I bought DEWALT 20V MAX* ANGLE GRINDER DCG412B, the motor gets hot after 5 minuets at continuous operation, then the motor stop operate until it cools down
@SteveRobReviewsАй бұрын
@@TexasMan-oz8kl Interesting , that's never happened to me before. I wonder if the thermal cutoff is set too low on your unit.
@gatorsworld5 жыл бұрын
GOod review Steve....I have a bat. Grinder and would not trade it for no other tool....the best battery tool they ever came out with other than the drill....the impact....the sawsall.....the circular saw.....what we do without all these tools.....CHEERS
@SteveRobReviews5 жыл бұрын
Thanks Gator !!!!
@mostlymoparih56825 жыл бұрын
Do you guys know how to use a hand saw or a hack saw?
@SteveRobReviews5 жыл бұрын
Nope , never heard if it. Make a vid and show Gator and I all about it. 👍👀
@mostlymoparih56825 жыл бұрын
@@SteveRobReviews You very funny Dr Jones.
@RealToolReviews5 жыл бұрын
I think you might be a tool reviewer after all... 😉👍 nice job Steve!
@SteveRobReviews5 жыл бұрын
LOL thanks Daniel I've watched you a long time and I'm not getting any close but thats ok your real good at doing tool reviews and just maybe one day me too :) Thanks bud.
@ml2trick5 жыл бұрын
Good Video. I just used mine to cut the axle u bolts off a F-150.1 1/2 batteries to cut off eight 1/2 u bolts and it saved my ass in below zero Weather.. Hope all is Good in Canada. eh
@SteveRobReviews5 жыл бұрын
Nice , many situations a cord gets in the way or you dont have an electrical outlet handy. My first cordless grinder and I cant stall it out. Awesome power and for the money will come in handy up at the camp. All good up here and this has been one cold snowy winter most are complaining about as climate change but I call it weather like we always had :)
@billyr98405 жыл бұрын
I'm just guessing that you have the 20 volt-2 amp hr batteries which in my opinion are good for light duty work. If you use these tools all day long as I do making a living,I would suggest upgrading your 20 volt batteries. Dewalt makes 20 volt batteries ranging from 2 amp hr - 6 amp hr. I,m no battery engineer but I use these tools 8 hrs or more a day and I have found that if you suck the life out of the smaller amp hr batteries by extended use that you heat them up and shorten the life out of them.
@billyr98405 жыл бұрын
Correction after reading Steve's post, Dewalt makes 20 volt batteries from the 1.5 amp hr - 6 amp hr. I did not know that as the smallest rating that came with the tools i own was 2 amp hr.
@shovelhead85 жыл бұрын
Walter always made the best discs and flap wheels.Looks like a good grinder. Maybe someday I will modernize. Thank you for the video, Steve
@SteveRobReviews5 жыл бұрын
Walter is real expensive and used for the pros so ya won't see me using one :)
@randygifford52463 жыл бұрын
The Allen wrench only fits into 2 0f the 4 holes on the nut.
@SteveRobReviews3 жыл бұрын
👍
@michaelc72834 жыл бұрын
I do wish dewalt can make a new version of this model disk grinder with a brushless motor and disk break. I do like the handle and trigger on this model then the new paddle version . Only the UK has the new model disk grinder with the side switch. I do prefer that style way better then the paddle style. If you get a chance use the new 6.0ah (21700) or new compact 4.0ah (21700) cell batteries. Runs the tool longer and cooler. Thanks for the video
@SteveRobReviews4 жыл бұрын
Thanks Michael I will check them out. Cheers
@outdoorsmansgarage5 жыл бұрын
I've never had any luck with the battery powered grinders I have a 30 year old Makita myself and I have a newer one but maybe it's time to try the battery ones again
@SteveRobReviews5 жыл бұрын
James I tried one when they first came out and they sucked and i could stall it out so easily but the ones today are real powerful.
@diymisfit_Mechanic_UDX4045 жыл бұрын
Next week on Steve Rob Reviews: How I caught my pants on fire 😆
@SteveRobReviews5 жыл бұрын
LOL
@farmboy301175 жыл бұрын
That's the one cordless tool I still need to get. Thanks Steve!
@SteveRobReviews5 жыл бұрын
Jay this grinder is real powerful , more than I would have thought.
@saltyolbroad2962 Жыл бұрын
The allen wrench is instead of. If you look on the black thingy that holds the disc on, 2 of them are now allen wrench holes and 2 are your kindo wrench hole. That's the only thing I understand about this grinder. Lemme know how to figure out which wheels/blades fit on that particular model because I can't find any or I don't understand the numbers I need!
@sargelaforgia4787 Жыл бұрын
You can use any 4 1/2 in. Disc with 5/8 or 7/8 hole.
@saltyolbroad2962 Жыл бұрын
@@sargelaforgia4787 thank you!
@carterscustomrods3 жыл бұрын
I usually only buy XR series from DeWalt. However, I only have 1 functioning arm, so I'm hesitant of angle grinders. This has a great handle it seems though. Anyone think this might be a safer option for cutting metal (angle iron, bolts etc) than the other options out there, for my disability? Using rotary tools takes forever. Thanks!
@SteveRobReviews3 жыл бұрын
I have a abrasive disk chop saw I used for decades cutting steel and this is by far the best as you can only use I arm to operate it. Cheers
@astrofisher32814 жыл бұрын
Glad I found your video. I was also confused with the allen wrench. All four holes on the nut looked the same to me. Put my reading glasses on and sure enough, two of the holes accept the allen wrench.
@SteveRobReviews4 жыл бұрын
LOL join the club buddy, man this was not so easy to figure out .
@CarsExposed5 жыл бұрын
Nice bit of kit Steve, cordless tools is definitely the way to go cheers bud 👍👍👍
@SteveRobReviews5 жыл бұрын
Thanks Igor , for metal and wood working their great but for impact tools in automotive i'm sticking with air. I bought one cordless impact and its great but it doesn't come closest to how much I like air better. Cheers
@tinman19552 жыл бұрын
Do you really need that many grinders? Or are you just a tool geek? Anyhow I wish I could get one for $90. It's June 2022 and the bare tool is $135 at the big box.
@vdub19592 жыл бұрын
Amazon has 90 day guaranteed renewed models at $115 USD. About to order one today for some concrete block removal. And some rebar cuttin too.
@gabagool2064 Жыл бұрын
If you have different wheels on multiple grinders you don’t have to stop to change wheels
@tinman1955 Жыл бұрын
@@gabagool2064 Just so.
@YankeeLivn5 жыл бұрын
Nice reviews Steve , I have Dewalt tools and have always been happy with them, thanks for sharing
@SteveRobReviews5 жыл бұрын
Thank you it's easy reviewing great tools. Cheers
@williamcapps35085 жыл бұрын
I just bought mine and the disk has 2 hex holes and 2 full circle holes....the allen wrench is used to remove it.
@SteveRobReviews5 жыл бұрын
Thanks bud !!!
@sixtyfiveford5 жыл бұрын
I love my cordless grinder.
@SteveRobReviews5 жыл бұрын
Moe their much better than years back but my favorite is makita with a cord over 25 years old :)
@ritterjon5 жыл бұрын
Great review Steve. Can’t say I’ve had much luck with Dewalt grinders but it seems they come a long ways. I do love my cordless tools. Can’t afford them many yellow, blue and red brands though. Sticking with Craftsman, they’ve never let me down. Except my router, that piece of crap is getting tossed soon!!. 😂👍 God bless!
@SteveRobReviews5 жыл бұрын
Thanks Jon its always an experiment buying anything but overall it's been worked hard so far and still operating great.
@BruceLyeg5 жыл бұрын
Heck of a deal! I should invest in a cordless grinder one of these days.
@SteveRobReviews5 жыл бұрын
Great tool for refinishing a guitar with :)
@BruceLyeg5 жыл бұрын
Hahahaha
@wyattoneable5 жыл бұрын
Nice tool and a good review. You can't go wrong with Dewalt.
@SteveRobReviews5 жыл бұрын
Thanks bud and a fellow from Idaho informed me my eyesight is on par with a bat :) the allen wrench does fit the nut to take the disk off.
@adventurerhoades3 жыл бұрын
Looks like a great grinder. On my Christmas list now.
@SteveRobReviews3 жыл бұрын
I think its awesome and I have worked it plenty. Cheers
@saltyolbroad2962 Жыл бұрын
Tell me what discs it uses, please, because every one I buy doesn't fit THAT model. Do you have a video on that? Matching the pad/blade to your model based on whatever numbers it is that I need (because I apparently I do not understand it)? There seems to be a type 1 and type 27. The rotation speed is important too from what I've read. So, I find it very confusing as all the stuff I bought so far, I've had to return. I know it's user error but user can't figure out the info!
@SteveRobReviews Жыл бұрын
I just pick out a 4.5 inch disk with a 7/8 mounting hole. Measure yours for fitment.
@sargelaforgia4787 Жыл бұрын
You can use any 4 1/2 disc with 5/8 or 7/8 hole.
@SteveRobReviews Жыл бұрын
@@sargelaforgia4787 You must match the hole size on the disk to your grinder .
@jps5144 Жыл бұрын
I'm not an expert, but I believe the type 1 blades are flat and used for cut-offs, and type 27 are sunk in the center and used for grinding. It does matter on at least some DeWalt grinders as they require different flanges to hold the different blade types in place. There is also a type 1 guard that covers 1/2 the blade on the top and bottom. I'm surprised this grinder doesn't have a type 1 guard as it's advertised as a cut-off grinder. I'd like to see how this grinder does with concrete, bricks, and mortar. This video says that a type 1 cut-off blade can be mounted by turning the top flange so the recessed edge is toward the blade to hold it tightly in place: kzbin.info/www/bejne/d37YlmOmZqydp9E
@saltyolbroad2962 Жыл бұрын
@jps5144 thank you!
@GrampiesWorkshop5 жыл бұрын
How's she goin'? Good looking grinder. Battery powered tools are decent now. The ability to stand it up to change blades is a benefit. Good review!!!
@SteveRobReviews5 жыл бұрын
Thanks Mike - all my cordless tools are mainly for up at my camp and the projects planned in the future.
@GrampiesWorkshop5 жыл бұрын
@@SteveRobReviews I'll be looking forward to seeing these projects !!!
@SteveRobReviews5 жыл бұрын
As soon as it get warmer in may its a huge project with a solar project for the camp. I like to take on 3 good projects a year and like to finish at least one . HAHA
@billpelfrey74012 жыл бұрын
The Allen key is for tightening the disc
@SteveRobReviews2 жыл бұрын
👍👍
@txsviking5 жыл бұрын
I can't have one :/ I don't own the appropriate safety gear. lol Dewalt makes the best.
@SteveRobReviews5 жыл бұрын
Think safety eh :)
@tjsoutdoors47862 жыл бұрын
The holes in the nut are hex holes.
@SteveRobReviews2 жыл бұрын
👍
@DoubleRRestorations5 жыл бұрын
Thats a great deal. Great review Steve.
@SteveRobReviews5 жыл бұрын
Thanks Russ a great addition to the tool box. Cheers
@larryz245 жыл бұрын
Steve, what are the amp hours on your DeWalt 20v batteries? I bought the 18-20V adapter kit with the charger and the 2 batteries are 1.5Ah and I am wondering how long they will last on a charge....Cheers
@SteveRobReviews5 жыл бұрын
Larry I have 2 - 1.5 amps and two 5 amps . The 5 amps are heavy so I use the smaller ones and they do what I need for the most part as I'm not using them constantly. They dont have the charge indicator on them so its hard to judge but I charge them up after about one hours use.
@joeo13525 жыл бұрын
Good review Steve ,It’s nice to stay with all the same brand and batteries. you need to check out on KZbin (smarter every day ) circular saw kick back killer. It’s about science for hand tools The guy that did the video was on roadkings channel maybe two years ago. That was about a glass head Briggs small engine. And yes It’s hard to keep some people safe. Hopefully you will like it
@SteveRobReviews5 жыл бұрын
Thanks Joe - will check him out.
@michaelc72835 жыл бұрын
Just disappointed that DeWalt didn't release the UK model style (DCG405) over here in the US. That model has a side switch which i like better then the paddle style. If you get a chance look at the video by Oz Tool Talk. Also these grinders are missing the top handle position. They only come on the both sides. Kobalt even has a 24v grinder that has the top and side section for the handle. Seems like DeWalt and Milwaukee has to release a new generation for this one mistake. Just wanted to share..
@xkuzu24 жыл бұрын
Great video!! Thanks for the advice!!
@SteveRobReviews4 жыл бұрын
Thanks Mike.
@AbsolutelyJason6 ай бұрын
Thank you!
@AnnieFarmerFarm5 жыл бұрын
Steve I'm going to buy me one I always wanted one ! Christmas Present for me! LOL
@SteveRobReviews5 жыл бұрын
Annie the yellow is a good match for you. I bet you could use it around the farm in a million places . Cheers
@Badgertronix5 жыл бұрын
Semms decent and at a fair price. Enjoy!
@SteveRobReviews5 жыл бұрын
Yes it's a great price for being cordless. In other parts of the world I can see it being quite pricey.
@cecilb32165 жыл бұрын
Guess who's looking at this video for the 1st time over that dam allen wrench. The comments section saved me a trip back to store.And saved a associate from me berating dewalt😀
@SteveRobReviews5 жыл бұрын
HAHA I know what ya mean .........
@drcoffee558811 ай бұрын
When all else fails read the instructions
@SteveRobReviews11 ай бұрын
😅🤣👍
@Mark-qw1rg3 жыл бұрын
Is the motor brushless?
@SteveRobReviews3 жыл бұрын
Not this model.
@Alex-mb7mx4 жыл бұрын
is this tool strictly for cutting metal or can it be used for grinding concrete? thanks
@SteveRobReviews4 жыл бұрын
It can cut most anything if you buy the required disk. Cheers
@MattieK094 жыл бұрын
Did they give you a 6” guard?
@SteveRobReviews4 жыл бұрын
I dont believe so.
@normansmith78065 жыл бұрын
I like my 20v DeWalt power tools !! 😋
@SteveRobReviews5 жыл бұрын
They are pretty good and for the price about the same as corded these days.
@benoitbeaudry46404 жыл бұрын
Bonjour du Québec, j'espère que vous allez bien . I have a question. ...I have this grinder .. . I bought this in a kit and I wonder if in your box you had others bushing for thinner or differents types of blades ?. I have only the nut that hold the blades and I reverse the nut for thinner blade. It work well but not sure it is the proper way.
@SteveRobReviews4 жыл бұрын
Benoit it works exactly like you say , no other bushings were in my kit either . Cheers
@benoitbeaudry46404 жыл бұрын
@@SteveRobReviews ...merci beaucoup Steve , j'apprécie que vous répondiez. Continuez votre bon travail ...votre énergie est contagieuse ...
@johnricci34285 жыл бұрын
You mentioned that a box of Walter discs could last 12yrs before you used them up. Discs may last a long time but I wouldn't use one several years old, new or used. All grinding/cutting discs are stamped with an expiry date on the metal ring around the hole. It is put there because the resins used in the manufacturing process will degrade over time. BTW, I have the same grinder and I love it!
@SteveRobReviews5 жыл бұрын
Thanks John i'm going to go out to the shop and look right now. I did not even look. Great tip.
@johnricci34285 жыл бұрын
@@SteveRobReviews Let us know what you find out. I'm curious to see how old they are.
@SteveRobReviews5 жыл бұрын
John I posted a picture of the disk on my instagram so if you want to look just look in this video description and click on my instagram link to see. I don't see one .
@leeb.71884 жыл бұрын
I bought one and there was no wrench in the box and no instructions (user manual). Does it matter if you put the blade label up or label down? This is my first grinder. Thanks.
@markallen40014 жыл бұрын
Lee B. Paper towards you.
@HopkinsChannel4 жыл бұрын
paquitos hammer No. it doesn’t.
@harrychana27394 жыл бұрын
what size of the Allen Wrench, please let me know, Thanks
@SteveRobReviews4 жыл бұрын
Metric #6
@LifeWithChase5 жыл бұрын
We see you don't read instructions either lol, I bet it told you in there what the wrench was for and to leave battery disconnected when mounting disc LOL. I wonder what the run time is on it continuously grinding? I never seen an allen wrench grinder tool either so that's a new on for me as well lol
@SteveRobReviews5 жыл бұрын
Chase I used it pretty good for 1/2 hour grinding and it still had two out of three bars. If I was really using it hard I bet 1/2 would be tops. Never seen an allen wrench for a grinder WTH :)
@vvvvvv82714 жыл бұрын
Hi this grander can install chain saw attachment?
@SteveRobReviews4 жыл бұрын
Never tried it.
@daveski79015 жыл бұрын
Allen might be for Gard adjustments .
@SteveRobReviews5 жыл бұрын
Dave there's no allen bolt on it so it's a mystery so far.
@jeffshearer51255 жыл бұрын
Dave Ski it fits in the flange nut, he needs his beer goggles on.
@johowohoj2 жыл бұрын
Kinda seems like if they say there is a wrench, there should be a wrench…
@SteveRobReviews2 жыл бұрын
Yep , that's a big if 😅😅
@johowohoj2 жыл бұрын
@@SteveRobReviews I’ve heard others say the same thing (missing wrench)about this grinder but it seems like those were refurbished models…looks like it works well and since I own a number of 20v tools, ima get one anyway… I got a pair of 2 ah batteries and a pair of 5 ah batteries… I like not being tied to a cord…cheers and thanks for the review…I too have a 25 year old makita with a cord
@SteveRobReviews2 жыл бұрын
👍
@jackassman67265 жыл бұрын
Steve You are driving Me to the "Poor House" with all of these "Must have Tools" ... LOL :(
@SteveRobReviews5 жыл бұрын
Hum my wife says the same thing. LOL Cheers Jack
@jeffshearer51255 жыл бұрын
Your not the first one that Allen wrench put a whoopen on.
@SteveRobReviews5 жыл бұрын
LOL and a big whoopen too.
@96754hi3 жыл бұрын
how do you put the disk on????????????
@SteveRobReviews3 жыл бұрын
Very carefully :)
@greekgods33993 жыл бұрын
what's the Arber size 7/8s
@SteveRobReviews3 жыл бұрын
Correct .
@greekgods33993 жыл бұрын
@@SteveRobReviews bc in the us they say its 5/8s
@SteveRobReviews3 жыл бұрын
All the disks are 7/8 hole size but the disk flange retaining nut is 5/8 .
@greekgods33993 жыл бұрын
@@SteveRobReviews ok
@ap0lmc4 жыл бұрын
Mine didn't come with the Allen key nor the disc
@SteveRobReviews4 жыл бұрын
They dropped the ball on that one, should have been in there.
@allanwesley99295 жыл бұрын
Great review
@SteveRobReviews5 жыл бұрын
Thanks Allan
@buzzsah5 жыл бұрын
looks like a good deal.
@SteveRobReviews5 жыл бұрын
So far so good . Cheers buzz
@donkyuhbuhts5404 жыл бұрын
Omg please don't change the Blade with the battery in it!!!! :0 lock or no lock your playing with fire!
@SteveRobReviews4 жыл бұрын
Good idea to think safety !!!
@michaelc72834 жыл бұрын
Remember, this dewalt grinder model has the safety lock switch. Once it's lock you will be fine. Still i get the your point.
@EXOVCDS5 жыл бұрын
Smoking deal yet again!
@SteveRobReviews5 жыл бұрын
Lots of smoke on the channel eh bud LOL
@mostlymoparih56825 жыл бұрын
@@SteveRobReviews Watch out the Leftist are gonna out law smoke,
@colmone55925 жыл бұрын
Steve, you have a tool-buying addiction. Ask me how I know.
@SteveRobReviews5 жыл бұрын
LOL so true buddy. 👍
@jonienglish32313 жыл бұрын
i have the Same LED Yellow LED Light - Bought at Costco Canada
@SteveRobReviews3 жыл бұрын
Yes exactly , great light 👍🇨🇦
@jonienglish32313 жыл бұрын
@@SteveRobReviews This Grinder is GOOD Thinking about This or the DCG413B Brushless this one on sale now at Crappy Tire $99.99
@SteveRobReviews3 жыл бұрын
Good price and awesome grinder .
@peterhunter19905 жыл бұрын
I’m assuming your in bc from the flag behind you, where did you get this for 90 loonies? I’m a bc boy that likes deals on tools😂
@SteveRobReviews5 жыл бұрын
Off amazon.ca it goes on sale once in awhile or Mississauga Hardware in toronto. Both free shipping . Born in Ontario , the flag was given to me by a viewer. Many think its a union jack :)
@porter7614 жыл бұрын
Anyone knows whats is the cutting depth?
@SteveRobReviews4 жыл бұрын
Depending on the disk about 1.5 inches.
@porter7614 жыл бұрын
@@SteveRobReviews Thanks
@porter7614 жыл бұрын
@@SteveRobReviews I'm looking at two options DCG412 and DCG405 what is you opinin on the DCG405
@SteveRobReviews4 жыл бұрын
I'm my opionion the brushless vs brush is hand down going for the brush design , only for the difference in price . I can't see me burning up this one so for me going brushless is not worth the extra money.
@porter7614 жыл бұрын
@@SteveRobReviews Thanks , I think i will go for the brushless since all my tools are Dewalt brushless
@stevelockridge93105 жыл бұрын
Dewalt D24802 Grinder Flange Nut # N106341
@SteveRobReviews5 жыл бұрын
Yes I finally seen the spot for the allen wrench after Steve Campbell mentioned it earlier . Man I had to look real close but that is the spot for it. Thanks I posted it on my Instagram as well. Cheers