Dewalt Cordless Jigsaw DCS331B Review and Use w Dr Joe

A complete review of the cordless DeWalt jigsaw, the DCS331B, is done by Dr. Joe. All of the features are thoroughly reviewed and examples of the cutting through Western red Cedar and Pine demonstrating the various orbital positions as well as dust blower. The tool less base adjustment and blade change are also reviewed.
Click here to order yours!
click.linksynergy.com/link?id...
Or get it on Amazon here!
amzn.to/3SqQmbp
* please be advised that the above link is an affiliate link, and I do receive a small commission if you make a purchase which helps support videos like these
#ad #amazon #DeWalt

[@juanitatorresfranco9628]

Thank you finally someone who explain it well and slow for a beginner like me. ✨

[@JosephHunstad]

Thank you very much stay tune there’s more to come

[@jonathanmekanak8228]

Just got mine today and your video helped me out a ton. I never owned a cordless jigsaw before so its much appreciated

[@JosephHunstad]

Thanks for your comment. The more I use mine the more I like it. I think you’ll have a good experience with it it’s a good tool. Take care Joe

[@sochajf]

Just ordered one today. Your video sure makes it simple to understand the operations of its features. Thx Dr. Joe, I appreciate your time.

[@JosephHunstad]

Thank you Sochaijf I really enjoy my Dewalt jigsaw. I know you’ll like it also. Please consider subscribing. Thanks, Joe.

[@lesliebutler5674]

As someone just wrote, explained very well for the beginner. Thank you.

[@JosephHunstad]

Hello Leslie. Thank you for your kind comment. I’m glad you found it useful. Consider subscribing. Thanks. Joe.

[@pitcherthis6483]

Nice clear video with explanations of the features. Thank you Sir.

[@JosephHunstad]

Thank you for your comment Pitcher This This is a great tool every time I use it I smile. Please consider subscribing. Thanks - Joe

[@anthonycaruolo3246]

Just bought one from Ebay, brand new, tool only. The only instructions with it were for the battery and charger, which it did not come with. So thank you for you thorough explanation of this jigsaw.

[@JosephHunstad]

Thank you very much for your comment. It is my pleasure and I’m so happy you were able to get the information needed for your jigsaw. I think you’ll find it an excellent tool very well-made and durable with great features. Take care Joe

[@BradZook]

GREAT explanation. Thank you.

[@JosephHunstad]

Thank you for a nice comment. I’m glad you found it useful. Consider subscribing. Thanks. Joe.

[@heyzeuss]

Thank you. Very informative. About to use my new dewalt dcs331b

[@JosephHunstad]

Hello LFDT Gaming! Thank you very much for your comment. I really appreciate that. Let me know how it goes. Please consider subscribing. Thank you Joe.

[@Moneimjamei]

nice and easy to understand review , thank you

[@JosephHunstad]

Thank you for your comment to check out my other video and take care Joe

[@stevenmuraco]

Very informative as always !

[@JosephHunstad]

It’s true that a 5 inch blade length will only really cut material of 4 inches because you can’t utilize the upper 1 inch or so. This is very true so take that into account when you consider blade length

[@terryhiddink1235]

Great Video. Better than trying to read the instruction sheet.

[@JosephHunstad]

Hey Terry, thanks for the comment. Yeah this is a powerhouse device. I love it. Consider subscribing. Thanks Joe.

[@davechan5159]

Very nice review. Well done 👍

[@JosephHunstad]

Hi Dave, thanks for the thumbs up. I love this jigsaw. It is so versatile and powerful. No need to use anything corded anymore. Consider subscribing. Thanks Joe.

[@velascojidon390]

Your video is very helpful, tool's awesome specifically to cut circles .thank u.. I'm subscribed 👏

[@JosephHunstad]

Thank you very much for your comment chucho! It’s a very useful tool and it works great. I know you’ll enjoy it. Thanks Joe.

[@velascojidon390]

@@JosephHunstad 🙂👍

[@Parralysis]

Great video

[@JosephHunstad]

Thank you very much for your nice comment. Consider subscribing. Thanks. Joe.

[@yzanzuri1]

Great review. Thanks

[@JosephHunstad]

Thank you very much for your comment. This is a very good tool powerful durable accurate I think you’re really enjoy it. Joe

[@Trigundel1977]

hi, Can the power button get stuck, or do you have to hold the button down for it to work continuously?

[@JosephHunstad]

Hey, good question. No there’s no constant on you have to keep holding the trigger to get it to run. I guess that’s a safety feature. Consider subscribing. Thanks, Joe.

[@martin8829]

I just got this tool I find the dustblower isn’t really doing anything shouldn’t I be able to feel the air if I check with my hand without a blade in ?

[@JosephHunstad]

If the dust blower isn’t working effectively I would take it back immediately and get an exchange. When it works well it works great. Take care Joe

[@martin8829]

@@JosephHunstad thank you will do

[@ericgivens7586]

I found out that the selection switch on the side isn't for speed. It's actually for the angle of the blade. Whether or not it ls parallel to the material. If you look close to the stamped depiction of the blade you can see a picture if the material vs the position of the blade. That's why the cut is of lesser quality when you stitch it from 0.

[@JosephHunstad]

Yes that switch on the side changes the isolation from 0 to 3. Three is the most aggressive cut but the poor‘s quality zero has no oscillation a fine cut but it’s slow. The variable speed comes from the trigger. It’s a great unit I’ve used it quite a bit over the last week thanks for your comment.

[@peteryeung111]

Dewalt should hire you for instructional videos. Thank you for your time sir!

[@JosephHunstad]

Thank you for your comment. I would love to have Dewalt sponsor my channel. I have so many of their tools and they’re always great they have always performed well for me. Take care joe

[@peteryeung111]

@@JosephHunstad Haha…me too. Although I sometimes are tempted to switch to Milwaukee, but I already have all I need with the Dewalt brand. All quality tools and can’t go wrong or have too many. Take care.

[@JosephHunstad]

@@peteryeung111 Thanks buddy I’m with you

[@TheBluceRee]

bought one, my dust blower doesnt work. :(

[@JosephHunstad]

I am so sorry your dust blower doesn’t work. That’s no good. I would exchange it for a new one. Consider subscribing. Thanks. Joe.

[@wyattsdad8561]

Did he say if it was 3000 rpm or the 3200 rpm model?

[@JosephHunstad]

Thank you for your question. This is a 3000 RPM unit. Consider subscribing. Thanks Joe.

[@wyattsdad8561]

@@JosephHunstad hey do ya think that new one that is 3200 rpm and brushless is any good? Also how is the dust blower on the one you’re doing the video on? And does it have an LED light for seeing the line?

[@JosephHunstad]

@@wyattsdad8561 well first of all this one is brushless, so I think that’s better. The brushes will never wear out because there aren’t any. It does not have an LED light and the dust blower. It’s for position and it’s OK but it’s not fantastic. Thanks, Joe.

[@rogerfoster3997]

I have one & its a love hate relationship, I love the balance & quality of cut & tool, I hate the shoe design with the gap at the front & no way to easily follow a line if you can't see the blade & the bogus dust blower helps pile dust up in front of the shoe when cutting things like rip cuts on laminate flooring, even crappy $60.00 cordless saws have a shoe with a closed in front & indentation for center of the blade along with a vacuum attachment that can push into the back of the shoe to suck the dust out. so they spent a lot of time over designing its awesome features while overlooking its ability to easily perform its basic task.

[@JosephHunstad]

Roger thank you so much for your excellent observations. No question I’m disappointed with the lack of cut visibility , because of the poor dust clearance. And yes, I agree. The shoe design could be much better. The versatility and power and control and feel of the tool is excellent, but it does have some issues for sure. Consider subscribing. Thanks Joe.

[@tinman1955]

I bought that saw. It worked fine with wood cutting blades but would not hold onto thinner metal cutting blades. Spit them out. It's an issue with these saws judging from product reviews. So I returned it and bought a corded Bosch for half the price.

[@JosephHunstad]

Thank you so much great comment. I have not used it with metal cutting blades but I imagine because they have a thinner kerf the shank is thinner also. Thanks again for the update. Isn’t it amazing how corded are so much less expensive than cordless

[@niccbeans2939]

Black Plastic on base plate just irk shit out of me. That will be broken and wont snap on any more. My dad hates sum of tools made these days. Plastic crap. Sigh disappointed in tht like wat was they thinking

[@JosephHunstad]

Hello Nikko beans Thanks for your comment. Yes that non-golf plastic base could certainly be problematic. I imagine if it was cold and you dropped it it would crack and then what? The tool itself is good. Consider subscribing. Thanks - Joe