Dewalt dcb094k USB C 100W Power Supply and Charger DCB094K, Can It Actually Output 100W?

Testing to see if it can actually charge my MacBook at 100W?
Also how does it compare to a DCB113 battery charger?
Dewalt Adapter
homedepot.sjv....
imp.i284638.ne...
Usb cable with power meter
Amazon
amzn.to/3S9hlWA
DISCLAIMER: The links in this description could be affiliate links. If you purchase a product and/or service with the links above I could receive a small commission. This is not an additional charge to you!
Thank You! for supporting the channel, this helps in me providing new content each week!

[@madcow3417]

Thanks for the warning about the AC adapter being 65W. I'm patient enough to wait for them to release a 100W version, I'll wait.

[@Tools-Tested]

No problem, yeah it showed up and I was like wait a minute, thought these were coming with 100W...I didn't see that it was only 65W when I ordered it.

[@nrh7ten892]

I have two, I got one when it first came out last year. main use is for my MacBook Pro, and that them camping every time. I have the m12 charger but the output is quite low and slow. 100 percent recommend the dewalt dcb094. the dewalt charger with a 8ah can recharge my MacBook Pro 16 m1 from 10% to 100%, the 5ah not quiet a full charge I want to say it got it up to around 70% from 10%

[@Tools-Tested]

Yeah they work all some for charging a MacBook Pro.

[@claytona57]

I bought the DCB090 usb charger back in 2013 and still use it to this day. I just came across this video and didn’t know about their newest usb charger. It’s cool that it’s got the usb-c charging port and I’ll be getting one since the DCB090 doesn’t have a usb-c port for charing the iPhone 13.

[@Tools-Tested]

I was going to get the DCB090 but then I seen this was coming out with USB C. They just released it, and are hard to find right now. But it works well and 100W is a lot of power.

[@duncanmcleod39]

You can get a usb A to Usb C female adaptor and use it on the dcb090

[@MasteringMayhem]

Love it. Still waiting on mine to arrive from ACME Tools.

[@Tools-Tested]

Yeah I was checking Home Depot every day lol just waiting for stock, they had only 150 and were all gone that same day. Hopefully you get yours soon!

[@ohjasonj]

Just got mine today. Actually surprised it works. Even better the power supply fast charges my Noco GBX45 with Power Delivery kicking in (it requires 60W for Fast Charge) so tossing a Dewalt battery into the truck with the Noco ensures I'm good for a jump or emergency charging of devices.

[@Tools-Tested]

Nice! yeah its crazy, works really well for its size. Cant wait to pair it with a 5ah power stack. I just wish it came with the 100w power brick they originally advertised.

[@ohjasonj]

@@Tools-Tested Exactly. hard to find a reliable 100w brick for under $50-60 so that would have been great. My MacBook Pro '21 charger is 96W so I might run some tests with that and see if it's worth dragging back and forth from the garage on a regular basis.

[@maddawgzzzz]

Bring this on camping trips hooked into the 15ah battery. It can last about a week of use on that battery charging multiple devices

[@Tools-Tested]

Yeah that really is a good setup.

[@superpoon16]

Thank you for nice review.

[@Tools-Tested]

No problem!

[@PyroAnonymous]

That's actually better than the Dewalt wall chargers. With a 100w brick, it's not only faster than the DCB115, but it's much more versatile, being capable of being charged from either 120 VAC [with power brick] or 12 VDC [with charger that plugs into the ciggerate port]. Also, being able to charge your devices up to 100 watts from USB C

[@Tools-Tested]

Yep I agree, really is the best option.

[@AlexAlex-rz5mz]

Can I charge a 9 ah flex volt battery with it from time to time? Won't it be overheated? Thank you.

[@Adam-gi1yl]

Great product👍 Really fast changing -lost changing cable and dewalt not selling cables separately-that's really bad -cannot use it's potential because cannot get cable replacement 😒

[@Ist_Geheim]

I need something like that for my Makita 18V batteries. Is there something out there like this that works for Makita?

[@Tools-Tested]

Sadly Dewalt is the only one that supports PD currently. Makita only offers a USB A adapter with max out 2.4 amps.

[@Ist_Geheim]

@@Tools-Tested Hi, I think I've been misunderstood. I'd like to CHARGE my Makita batteries by a small device (incl. overload-protection). (For example for using a tool battery as a power bank on vacation without having the need to bring the big Makita charger with me. I don't need speed charging for this - slow charging over night via USB would be totally fine, with a small "backpack"-charger.) (Offtopic: I do know the Makita USB-adapter and I own one for two or three years now. But for your information there's aftermarket-USB-adapters for Makita-18V batteries out there. The one I got has USB, USB-C, 12V (!) at 3 amps and a light on it. The only downside on this aftermarket adapter is that it drains the battery even if unused, so you should not forget to seperate it from the battery after use.)

[@gooftroopg2623]

I was really impressed when I bought mine but the usb 2.0 input busted on the inside within 2 months

[@Tools-Tested]

Dang, I use mine a good amount, hopefully that doesn't happen.

[@beeps7]

It would still be under warranty. See if you have a dewalt service center in your area, they'd fix it for free.

[@donotrobme9295]

Excellent vid. Thx

[@Tools-Tested]

Glad you enjoyed it

[@FreeKanal]

Only if it could charge 12V also, that would be perfect charger.

[@Tools-Tested]

Yep that would have been nice.

[@محمدأبوقصي-ط6ي]

Is the included charger 110 volt or 220 volt?

[@Tools-Tested]

US its 110, but the wall adapter is also rated for 220. Looks like the end on the wall adapter can be changed out similar to Apple products.

[@ometofu]

This Xmas for sure

[@chapinsolitario1980]

Good evening everyone

[@cynide89]

Given it can charge a flex volt, could it charge the 12v DeWalt battery?

[@Tools-Tested]

No sadly its 20v only.

[@msstardust7979]

Anyone knows if you can instead of the socket adaptor hook a powerbank there and charge your batter that way?

[@Patriot3]

Is it a PD charging system? Was it running the laptop at 20 volts?

[@Tools-Tested]

Yeah its true PD pushing 100w, yeah it will run my Macbook with a dead battery.

[@Patriot3]

@Tools-Tested this is perfect for running my mobile office back packing. Will operate my mini star link at about 25watts 20 volts and my laptop recharge plus I can solar charge in a pinch if the condition is right. Who would have ever thought I could be in a video meeting hiked into a national park with $500 bucks of power equipment. Great video

[@Tools-Tested]

Yeah its crazy, I like to use it with the 5ah PowerStack battery. Thanks!

[@davidperry4013]

Milwaukee should follow suit

[@Civic1998]

Will it work in a car cigarette lighter with a proper adapter

[@Tools-Tested]

Yep with a good adapter I don't see why not.

[@Civic1998]

@@Tools-Tested 😊 Thanks!

[@jesusblessthesecommentsamen]

Pretty cool way to get into the platform without breaking the bank might use this with the compact wrench and my 40v makitas for the big stuff althought their impact specs look beefy. Cant stand red all i see in the tool shops 😂

[@Tools-Tested]

Yeah it’s definitely handy and compact.

[@jesusblessthesecommentsamen]

@@Tools-Tested yeah that it is mabey not so cheep milwaki charger is half the price but might get one still have my xgt as main charge in my 4x4 and that to add a wrench to my impacts compact setup. Cheers

[@realworldcarpentryremodeli5868]

I wonder if it would run a WiFi camera

[@Tools-Tested]

It should be able to power it but run time would really depend on the draw.

[@JuanDuenas1943]

Nice

[@Tools-Tested]

Yep its handy

[@sjakjoosten5499]

I boughy Just one in europe and it has 100watt poweradapter

[@Tools-Tested]

Nice, yeah you can get the 100w or 65w here now.

[@bossmanz28]

​@@Tools-Testedwhere do you see it come with the 100w power brick? I can't seem to find it

[@gf2e]

I do think it’s a bit funny that this seems to be showing up now, given that 240W USB C hardware is now starting to ship. One step behind :)

[@Tools-Tested]

Lol yep I’m happy it’s finally usb C!

[@gf2e]

@@Tools-Tested Yeah, I’d definitely get one if I had any LiIon DeWalt tools. My only DeWalt tool is an XRP powered NiCd tiny shop vac. Great tool, but I don’t think anyone makes an XRP to USB C adapter :(

[@markborrmannjr]

No amp meter? No protocol search with watt meter? Tells us nothing about what it's able to charge without defaulting to 12 watts

[@vocvocitus6100]

Well done very professional ps don't use a 100w charger on your battery's even though it can take it it degradation for the cells need a cell rectorfier to balancing the cells very dangerous on lipo bag cells had 3 near fiery problems stick with older cells

[@Tools-Tested]

Thanks! and thanks for the info!

[@vocvocitus6100]

Don't sweat it

[@jayslifevdb9367]

125 euro's here i find it to expansive

[@56jmack]

can you plug it in to your cigarette lighter port in your car and charge it?

[@Tools-Tested]

Yeah theoretically but you will need a 12v cigarette adapter to usb C.

[@56jmack]

@@Tools-Tested Thanks

[@PerawWordskin]

Love it. Still waiting on mine to arrive from ACME Tools.

[@Tools-Tested]

Nice, Good choice! I love mine!