DeWalt Gyroscopic Screwdriver vs Milwaukee vs Craftsman

[@phbrinsden]

I purchased the DW a few years ago and assembled an entire kitchen of cabinets including screwing fixings to the wall studs. I got used to the twist motion very quickly. I also had to replace all the outlets in my son’s large home after a flood and it saved me with all the screws to be done. I use it for tool and appliance repairs etc. and just about all medium duty work. It is probably the most used tool in my extensive shop. I do use it for driving screws into wood for hinges and door furniture. It even drills the holes using 1/4” shank drills. But when it comes to construction screws in heavy work then obviously I go to the impact driver. So many small screwdrivers are 4 volt but this one is 8 volt, It makes a big difference. About 99% of the time I use it in pistol grip format.

[@projectpinehills]

Thanks for the feedback. Right, the other screwdrivers are 4 volt including the craftsman in show in the video. Thanks for watching! 👍

[@YoP-3194]

I really like the DW... And thank you for the comps. ✌️

[@projectpinehills]

@YoP-3194 thanks and thanks for watching. In hindsight, drilling into a 2x4 would have made a lot more sense.

[@GarenP]

The DeWalt is my favorite of the electric screwdrivers. A big value of the gyro is being able to hold it in awkward positions and still get it to work one-handed. If you play with it a bit you can also switch it into pistol mode with one hand. The clutch allows you to approximate a certain torque for fine screws (think PC parts, RC cars) and it's still powerful enough to drive in sheet metal screws. In general it's also a good option when you DON'T want an impact that could risk stripping or over-torquing a fastener.

[@projectpinehills]

Thanks for commenting and thanks for watching! 👍

[@1966babysnakes]

I've used my DeWalt at work for over 2 years now... absolutely brilliant bit of kit.

[@projectpinehills]

Thanks for the feedback. Good to know how it is in practice. 👍

[@thermal_el_jackson]

I think you meant well, but this comparison fails. Cordless screwdrivers should be showcased doing things someone might do with an unpowered screwdriver. No one on Planet Earth except maybe Chuck Norris is sinking Torx bits into tree trunks using a screwdriver and no pilot hole. You should have shown normal tasks, such as replacing outlet covers, Christmas toy assembly, drawer handle tightening, and other household tasks that normally call for an unpowered screwdriver.

[@projectpinehills]

I agree. From that perspective yes, it is not what you’d use it for though many people talk about the high torque of the DeWalt Gyro. I was trying to show the difference in torque. But it was made clear it wasn’t a typical use. Thanks for commenting!

[@tgreening]

This comparison does not “fail”. Why compare this unit, or any similar, to a standard screwdriver? Everyone knows what you can do with a regular screwdriver, and it’s “torque” is limited to whatever the user can apply. I say it’s very appropriate to demonstrate what kind of torque these can apply.

[@projectpinehills]

Yes, it’s just a demonstration though I think it would have been better to use a piece of 2x4. Thanks for watching and posting! 👍

[@SlimMichaelSpaghetti]

I only have dewalt tools. That being said I chose Milwaukee M4 screwdriver. No carpal tunnel

[@projectpinehills]

Thanks for commenting. M4 is worth a look. Thanks for watching!

[@wvhunter1968]

I've dabbled in cheapo cordless screwdrivers and finally pulled the trigger on the Dewalt. This thing is the real deal. Faster RPM's than anything else I've used (those long electrical outlet machine screws were painful with a cheap slow unit). The gyroscope motor was extremely intuitive and had it figured out after a screw or 2. Impressed and in love after a day of changing recepticals and switches.

[@projectpinehills]

It is excellent for repetitive work. Thanks for posting and watching! 👍

[@rafbuelens4908]

When we got this one at work I thought the gyroscopic motion would be a gimmick, but it feels so natural in any position you use it. It's very easy to operate with one hand, so you can use the other hand for holding things up. I was able to mount quite heavy light fixtures with this solo. That would usually be a 2 man job.

[@projectpinehills]

That’s a great example you gave. It’s definitely something you get the feel for. Thanks for posting! 👍

[@AmericanPaisa99]

I have the original inline version of the DeWalt and I love it. I does all that I need it to do.

[@projectpinehills]

Good deal! Thanks for watching! 👍

[@lamiglass1]

I have the dewalt screwdriver but mine is the fixed position one, I wish when I bought I knew there was a version that had the switchable handle but still make a lot of use of it

[@projectpinehills]

Yes I like the pivoting handle. Thanks for watching! 👍

[@stringlarson1247]

I'm not a DeWalt fan, but my 20ish year old DeWalt screwdriver still works. Batts need replacing, and are not cheap. Picked up a Metabo/HPT because is was on sale at Lowe's and I like their stuff. The Metabo and the Milwakee version (not the Surge in this video) look identical. Having said that, DeWalt has a winner here for this class of tool. The gyro is interesting, tho I'd probably come to love it. The handle and the ring light on the front are excellent design choices. Also, the trigger control is way better than the F/R side switch on the Metabo and Milw. The Milw Surge is a sweet tool, and the M12 battery options (big and small) is a great feature of the M12 series. Now, if there were a universal form factor for batteries . . .

[@projectpinehills]

Thanks for the feedback. I’ve heard good things about Metabo. Thanks for watching!

[@mikeboulianne6714]

I have had the Dewalt for over 3 years and use it pretty much daily for work I have probably charged it less than 10 times, Charges fast (less than an hour) I love the gyro no fumbling with forward reverse buttons. An excellent screw spinner Great for removing panels.

[@projectpinehills]

Thanks for the feedback. The battery does last a long time. 👍

[@danmorgoshi7598]

I got the surge . Beautiful tool . Very good video . Thanks . 👍

[@projectpinehills]

Thanks for watching! Consider subscribing, there is no cost to sub 👍

[@yoyo87069]

Do you have to add hydraulic fluid to it?

[@kevinarnold7065]

So, your video illustrates how different tools provide different results!

[@projectpinehills]

So yes, that is part of the video. Thanks for watching!

[@nixland]

Thank you for the review. So the Dewalt will stop screwing if it reach maximum torque? I am looking for that kind of cordless screwdriver. I have one (non dewalt) but it keeps screwing when it reach max and damaging the screws.

[@projectpinehills]

The DeWalt will stop but you can also set the clutch to stop at your desired torque. Thanks for watching!

[@nixland]

@@projectpinehills thank you

[@em4me-Dan]

The Dewalt is a great tool and many have a hard time with the "Gyro" but once you get used to it you should have no issues. Can't compare it to the Milwaukee impact driver but its good to see its capabilities. The Dewalt is my tool of choice when it comes to light to medium work and it goes with me all the time as part of my small EDC tool bag. Great review👍! Kudos from NYC🗽.

[@projectpinehills]

Thanks for commenting and thanks for the feedback. Yes it take a little getting used to but then you aren't fumbling around for buttons to change change direction. Thanks for watching!

[@nitrofish1974]

I have a Milwaukee screw gun 24 0 1 - 20 Non impact And it Kix ass But I do like the Dewalt driver And we'll probably get one I did like the way the gentleman displayed how it works. Awesome

[@projectpinehills]

Hey thanks. Thanks for watching! 👍

[@geektarded]

Did your dewalt gyro come with any bits? I bout the same 2 battery kit and mine had no bits 😢

[@projectpinehills]

Right, it doesn’t come with bits. Thanks for watching! 👍

[@TobyOHara]

Can the dewalt be used without the gyro?

[@projectpinehills]

Yes, only Manually, it has a spindle lock. Is that what you meant or using the electric motor without gyro?

[@nerdy355]

No, not as a power tool. You have to be able to twist your wrist to make it work, which is sometimes awkward at best.

[@skinnytrees]

An impact will destroy the things you would want to use the electric screwdriver for. The Dewalt is the best one you can buy in its class.

[@projectpinehills]

That’s right. I said in the video that they are two completely different tools. Thanks for watching!

[@vettepilot427]

I know I’m in the minority, but I found the gyroscopic speed control on the DeWalt frustrating to use. I use my screwdriver for gunsmithing and most of my screws are hex head (Allen bits) or Torx. I find that I often need to rotate the tool to line the bit up for engagement, which put it in an awkward position once I rotated it further to actually turn the unit on to rotate the screw and reach full speed (for disassembly). The handle would be almost 90 degrees (or more) from my start position once I aligned the unit with the screw and then rotated it for full speed. So you either start out of position and rotate to somewhere more neutral, or you start in a neutral position and rotate to something out of position. It’s built well and powerful, but I’m planning to try the Milwaukee since it operates more like a conventional electric drill. I’ll keep the DeWalt around the house since it is a good tool.

[@projectpinehills]

That makes sense. Yeah it can feel odd if you are in an awkward position. Thanks for the feedback and thanks for watching!

[@simonwilson3115]

Does millwalkue make one like the dewalt where it has the twisting motion?

[@projectpinehills]

No, Milwaukee doesn’t make a gyroscopic screwdriver, they do make a cordless screwdriver. Thanks for watching!

[@blackirish4416]

What’s the bits you’re using in this vid on the DEWALT?

[@projectpinehills]

Happens to be a Milwaukee 3 1/2” bit. Thanks for watching! 👍

[@ronaldKOESTLINGER]

I have 3 cordless screwdrivers and the only one I reach for is my Dewalt every time don't know how I got along without it for so long.

[@projectpinehills]

Thanks for the feedback. People love it, makes me wonder if DeWalt will update it. Thanks for watching! 👍

[@martinkorinek5489]

I had no idea hydraulic dumping for impact driver exists, nice. Also great comparison to Dewalt, which I am now most interested.

[@projectpinehills]

Thanks for watching!

[@GmoneyX112]

Don't get the Dewalt it is garbage, I returned mine

[@projectpinehills]

Sorry you had an issue with it. Mine has worked fine, more of a question for me about the size of the unit vs a 4v screwdriver.

[@godfreyappliance5585]

Like to see size and differences between 12 v fuel screwdriver and 8 v dewalt

[@farronkelly7899]

The DeWalt is worth the money. One of the best tools I’ve used. The gyroscope is well made and responsive. You can fasten or loosen screws quickly or slowly depending on your natural hand motion. It also has a lock, so you can use it like a normal screwdriver without worrying about it going off. One advantage I don’t think you mentioned is the DeWalt can take any Impact bit, so you really just need the bits and this one device to do everything you want with fasteners. Overall, I’m honestly kind of shocked Milwaukee and Makita haven’t made their own gyroscopics. Even DeWalt seems to be on the fence about it now somehow. It’s a different battery line, but this tool has a strong niche in the sub-Impact, save-on-weight-and-space market that I guarantee does exist. No one knows this thing exists though, that’s the problem. I show it to guys at work and they have no idea what it even is.

[@farronkelly7899]

Also worth noting, where a lot of jobs will mandate that you can’t/shouldn’t even use Impacts on finishing projects, this tool has gotten me approval from foremen. Since you can control the speed easily, unlike the Impact there or at all with the Craftsman, you can comfortably use it to save your wrists while not damaging screwheads.

[@projectpinehills]

Yeah it’s not really readily available at stores to buy. Thanks for watching!

[@projectpinehills]

Right. Great for cabinet work.

[@mathewtorres1352]

You can’t really compare an electric screwdriver to an impact driver…

[@projectpinehills]

Right. That’s not what was compared, it was just antidotal. Thanks for watching!

[@kyleclemente5939]

You need to learn why some jobs are better done with a screwdriver than an impact before you speak. Obviously you're not a trades person..

[@projectpinehills]

@@kyleclemente5939 you obviously didn’t pay attention, it’s explained at 06:22 in the video.

[@rayrainer985]

You should compare the Milwaukee 4v screwdriver. I bought this Dewalt but took it back because I didn’t like it and just paid the price for the Milwaukee 4v screwdriver. I still like the Milwaukee screwdriver 4v better because I also had the Milwaukee 2.4 v NiCad earlier for simple light duty jobs but difficult to get the NiCad batteries. I tried others but nothing compared to Milwaukee 4v screwdriver, unfortunately pricy at $150+ but worth it. I also have the Milwaukee m12 screwdriver for other jobs. You have to be careful with an impact driver that might strip the screw. I also have the Milwaukee 12v screwdriver for more torque than 4v.

[@joejoe6949]

I use mine for installing outlets , 1900 box cover ,and a conduit reamer.

[@projectpinehills]

Nice. Thanks for the feedback and thanks for watching!

[@yoyo87069]

Do you have to Add Hydraulic Fluid to it?

[@projectpinehills]

No. Thanks for watching! 👍

[@jasonstewart7285]

Sorry this is the worst experience I’ve had in a tool comparison ever, it like hey let me grab what I bought from Home Depot and see how it compares to my impact driver and then let me be a sales person for Milwaukee

[@projectpinehills]

Ha, I made clear the impact was not part of the comparison. These electric screwdrivers are not for high torque applications. Thanks for watching!

[@-Nobody-1]

Cordless screwdrivers i feel are best for small machine screws holding on a mud ring or a cover plate or an outlet or switch mount screw…..

[@projectpinehills]

That’s right. I was trying to show the torque differences, not imply that it is for drilling into non piloted holes.

[@Peponlikespeson3684]

So you didn’t used the Milwaukee m4 power screwdriver? Instead the m12 impact

[@projectpinehills]

No, I have not seen good reviews of the M4 and I already own the M12. Thank You for commenting and watching!

[@tomsmith3045]

This wasn't a review of the tool used for its intended purpose. Are you driving screws into wood? Use an impact driver. Are you looking for a tool to take the place of a manual screwdriver? Assembling furniture, electrical work, fine trim work? That's what a power screwdriver is great for. It's along the lines of chucking a torx bit in an SDS-max rotary hammer and seeing if you can drive a desk screw in with it, then stating it would work better if you could turn off the hammer part.

[@projectpinehills]

I’m glad you got something out of it. Thanks for watching! 👍

[@JGsgarage_unboxings]

I have this DeWalt. As far as screwdrivers go. Im going to buy a second one. Just in my opinion. Its the be all end all screwdriver

[@projectpinehills]

Thanks for the feedback, I do like it. 👍

[@dirtrider88]

this question is for anyone with this tool, particularly the one with the rotating handle and clutch like in this video. does yours rattle when you shake it?

[@projectpinehills]

Yes it does and I checked into it and they all do.

[@dirtrider88]

@@projectpinehills thanks so much for answering me. i emailed dewalt about it and i got a very automated feeling email back saying to return it. When you looked into it where did you find your info cause i couldnt find any.

[@projectpinehills]

I ordered a 2nd one and it behaved the same way. Noise in the collet… not something I’ve seen with other collets on impacts and the craftsman screwdriver for example.

[@EzraH]

Milwaukee doesn't have a product that compares to the DeWalt screw driver. That Milwaukee driver isnt a direct comparison i wish Milwaukee would do something similar size to the dewalt

[@rainbirrdd]

They actually do - it's an M4 tool

[@NINJA_INVESTORS]

​@rainbirrdd 4v vs 8v. Not a comparison

[@Hector-cy5xz]

Wow just the products i was looking into. Would be good to see these tools disassembling a small appliance with a lot of screws . My space heater broke i took it apart in 15 minutes, it had like 20 screws and i couldn't find them😂.

[@projectpinehills]

Yes this would have helped and a magnetic 🧲 parts tray. Thanks for watching! 👍

[@joncruz]

Great tool, just wish there were a non Gyro option. Too many complaints about stop working

[@projectpinehills]

I think a lot of people would like to see that. Thanks for posting!

[@howardwmoore]

I miss the old 7.2 I messed up and sold it to someone it was perfect for installing hardware

[@projectpinehills]

What was the old 9.5?

[@howardwmoore]

@@projectpinehills my mistake it was a 7.2

[@projectpinehills]

What does that number represent?

[@howardwmoore]

@@projectpinehills 7.2 volts

[@howardwmoore]

@@projectpinehills DeWalt DW920 7.2V Volt Heavy Duty 1/4 Inch Hex

[@cartharax4308]

From what I can tell I guess this isn’t as much a comparison between the Milwaukee vs the screwdrivers but I wouldn’t mind seeing the Dewalt vs Milwaukee’s I think 2 electric screwdrivers I know they have one of similar size to the Dewalt and another that’s pistol grip only, I think the pistol grip only is the “newer” of the two.

[@projectpinehills]

That would be good to see. Thanks for watching!

[@SuperMIKevin]

Best light driver ever made. Unfortunate that it stands Without competition.

[@projectpinehills]

I agree. Would like to see an updated version. Thanks for watching!

[@mrvang8077]

The thing I hate the most about some of these electric screw driver is wasting more money buying one after another because it just never could deliver the power and torque when you needed it the most in more than one different application. So you just end up buying more tools, which is very counterproductive. I just want one that can deliver the unparalleled power and torque that no matter what you are trying to accomplish. It is there ready to deliver it. I don't want a compromise tool that is good for one job and then failed miserably at another that is similar but requires more raw power and torque to get it done in one go.

[@projectpinehills]

That makes sense. There is room for improvement in the product line. The DeWalt has the most torque currently. Thanks for watching! 👍

[@musikus7092]

Get the Bosch GSR 12V-35. I use it every day at work. Small and very powerful

[@chingonbass]

My Gyroscopic is my most used driver.

[@projectpinehills]

Thanks for watching and posting! 👍

[@aeonjoey3d]

I’m over here with surprised pikachu face. I’m wondering if they patented it or if others will come out with gyroscopic as well. Really dig the variable speed. Very impressive

[@projectpinehills]

They have had it for years without anyone copying it yet. Thanks for watching!

[@Miikalee]

Ive considered running electric screwdrivers but it seems like nothing beats either a Milwaukee M12 or just a regular screwdriver maybe I'd think different if I had a bag smaller than a TPXXL

[@projectpinehills]

Yeah hard to beat the M12. Thanks for commenting & Watching!

[@sociopathmercenary]

I really love that DeWalt screwdriver. Frankly, I'm just too damn cheap. LOL Maybe another couple of years of doing IT work and my wrists will hurt enough that I can have my doctor write a prescription and use my flex spending account. 😇

[@projectpinehills]

😁lol thanks for watching!

[@mwhite5330]

I am surprised that there are not more positive comments about the craftsman! yes, I do have the m18 - driver, gun, and the big impact but, the craftsman is phenomenal for kids toys, ship to furniture, cabinets, and all the other tiny things around the house that a domesticated guy deals with. I'd rather be wrenching on larger items that need the big guns, but the family's small projects is where I find most of my time spent now days and that little craftsman has saved my wrist many times !

[@projectpinehills]

Agreed. The craftsman is a great under appreciated 4 volt tool that is better than the vessel 4 volt screwdriver. Thanks for watching!

[@SokolovSF]

Do you have this effect if you turn the screwdriver quickly to the zero position or is the gyroscope of my screwdriver faulty? kzbin.infokjtdK8gVpXc

[@projectpinehills]

I’ve tested and mine does not do that. I can tell that the gyroscope does not like sudden snap movements in opposing directions. It seems to throw the gyroscope off. Yours seems to be going into a mode that’s designed to force you to push the trigger again, resetting the gyroscope. Thanks for watching! 👍

[@oscarleroy-g3x]

try and find a genuine Dewalt replacement battery for this that is affordable.

[@projectpinehills]

Hard to come by?

[@oscarleroy-g3x]

out of stock everywhere unless you want to pay 94$ .@@projectpinehills

[@projectpinehills]

😲

[@KrillinInTheNameOf]

Why would you compare an electric screwdriver to an impact driver?

[@projectpinehills]

I made clear they are two different products. I talk about torque because that’s what the DeWalt is known for, a lot of torque. Thanks for watching! 👍

[@eljaime3839]

I have the dewalt and you can use it manually too

[@projectpinehills]

That is correct, it has a spindle lock mechanism that allows you to use it manually. Thanks for watching! 👍

[@paulcarlomagno1673]

I like Milwaukee hands down. But next time you should use the Milwaukee screw gun. And not the impact, also, the crassman is based off of the Mac tools screwdriver saint. Make saint model just a lot more, let's expensive.

[@projectpinehills]

In that case I’ll give that Milwaukee another look. Thanks for the feedback.

[@brandonforesee3593]

I have the cheaper DW. Use it every day at work. I love the idea but i find its very hit and miss. Sometimes ill have to press the button 5+ times to get the gyro function to engage. And this is my second one, took the first one back because i thought it was faulty. I REALLY want to love it, and a lot of the time I do. But the gyro is so flakey that it's incredibly annoying.

[@projectpinehills]

Does it happen in cold temperatures more? I have not had that happen yet. Thanks for watching!

[@brandonforesee3593]

@@projectpinehills nope, I'm in California central valley, we rarely have cold temps.

[@projectpinehills]

Yeah something is up with that.

[@nateryan7041]

Cheek of ya using a dirty Milwaukee bit in it 😂😂😂

[@projectpinehills]

Ha didn’t even think about it… I just like those 3 1/2” bits. Thanks for watching!

[@mdtaranto]

You sold me on the Milwaukee... lol. Not sure if that was your intent.

[@projectpinehills]

Ha, not trying to sell anything. I was trying to show the difference between 4, 8 and 12 volt tools. The DeWalt is great for low torque or predrilled holes. Thanks for posting! 👍

[@solaradt]

You are comparing an electric screwdriver to an impact driver?

[@projectpinehills]

No, trying to show different screwdriver torque. The impact is just for illustration.

[@zambination11]

So yeah we got it.. the Kia Rio can not move like the M1A2 Abrams in rough muddy terrain. Fair enough 😁

[@projectpinehills]

Not really what the point was… the impact was for people who may not be familiar with impacts. Thanks for watching!

[@zambination11]

@@projectpinehills Yeap! You've got a point! 😃

[@douglasdever6134]

Wow, the "impact driver" was able to screw a screw into a piece of tree, while the two electric screwdrivers failed. This review is worthless other than to show the Dewalt is a little stronger in the screw into a tree stump than a craftsman. Something anyone over the age of 18 already knew! Now give it a try with a Dewalt DCF961B 1/2 inch torque wrench. I'll come back in the next decade to see the results.

[@projectpinehills]

It’s great how excited you have gotten about this lol. Thanks for watching and commenting! 👍

[@shaguar00]

The comparison is moot when you did not include the excellent Milwaukee M4 Screwdriver. The model you featured isn't even a screwdriver.

[@projectpinehills]

Haha, it’s not featured. It’s there for torque illustration. Thanks for watching!

[@douglaspayne5029]

I'm trying to follow the logic of comparing an impact driver to a cordless screw driver? What's the point? That's like comparing drone to an airplane...

[@projectpinehills]

Yup 👍 Thanks for watching!

[@AMERICANPRIDE1100]

Not really a comparison more like a difference between

[@projectpinehills]

When you compare you also point out the differences. Thanks for watching!

[@danialtun5431]

DeWalt DCF 680 N-2 is i like it but our Asian online Lazada shoppe don't have they have DeWalt 008 only Loong side

[@projectpinehills]

I’m not familiar with the 008. Thanks for watching!

[@stevesky7043]

Gotta be apples to apples...

[@projectpinehills]

Right and it is, thanks for watching!

[@platoscavealum902]

👍

[@projectpinehills]

Thanks for watching! 👍

[@platoscavealum902]

Thanks for uploading.

[@Claudius2k]

Yeah, don't use an impact driver to put on electrical wall plates. As long as you're looking at drivers check out the Vessell 220USB P1. It feels like a screwdriver.

[@projectpinehills]

Thanks I’ll check it out. Thanks for watching!

[@8power0]

GOOD IDEA BUT IT'S ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, TO DAAM BIGGGGGGGGGGGGGGG.

[@projectpinehills]

Yeah that’s my dislike as well. I like the craftsman size. Thanks for commenting!

[@Claudius2k]

8volt battery. Okay then.

[@projectpinehills]

Yes 4, 8 and 12 volts between the 3 tools.

[@jetsetjoey]

I wish DeWalt made this with a fwd/rev switch...

[@projectpinehills]

Good point, I could see that! 👍

[@JGsgarage_unboxings]

I thought that too. Once I got used to it, I'll never go back

[@slayerment]

This comparison really makes the Dewalt look pretty useless. Just a hair more powerful than Craftman, but with a really large footprint. The Craftsman is good to use like a ratcheting screwdriver for low torque jobs. The M12 is a must for almost all jobs.

[@projectpinehills]

The automatic spindle lock makes the Craftsman handy. You pretty much summed it up. The Milwaukee M12 Surge is 2 lb and the battery adds more weight. So you cut the weight by more than half going with the DeWalt at 1.1 lb. Thanks for commenting and watching!

[@beri232]

Can’t compare an impact to screwdrivers. If I go to grab a screwdriver… I want a “screwdriver”. I don’t want something that’ll strip my screwhead or my bit.

[@batuksri]

They all too big. Learn from Vessel.

[@projectpinehills]

Ha, that craftsman is no bigger than Vessel.

[@se7002t]

They’re not drills!

[@projectpinehills]

That’s right, it’s an impact and 2 screwdrivers 🪛 thanks for watching! 👍

[@benfall5135]

Misleading on wrong job !!!!!!

[@projectpinehills]

Ha, that’s all explained in the video. If you missed it, watch it again. Thanks for watching!

[@philip6106]

I think the screwdriver sucks

[@projectpinehills]

Thanks for watching!