Dewalt releases 4 new tools: many will be angry

Dewalt releases all new new utility knives into the market, and that is a good thing...however!... I'm sure I'm already going to hear the fanboys crying that it's just like the Milwaukee Fast Back.
buy here
DeWalt Push & Flip Folding Utility Knife DWHT10991 shrsl.com/4k8lb
DeWalt Push & Flip Folding Utility Knife w/ Storage DWHT10992 shrsl.com/4k8lc
DeWalt Drop Point Pocket Knife DWHT10993 shrsl.com/4k8le
DeWalt Tanto Pocket Knife DWHT10994 shrsl.com/4k8lg
Check out our website here www.toolreview...
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
#dewalt

[@akaredcrossbow]

Would’ve liked to see a screwdriver flip out like Milwaukee.

[@actual_ice_lord4068]

Milwauk-I-A. Get it right.

[@ToolReviewZone]

@actual_ice_lord4068 🤣🤣👊

[@1993MAZDAMIATA]

It is always the Milwauk-I-A fans complaining

[@jwanilpatel3223]

I'm not a Milwaukee fan boy either but how are you going to come out with a product years after Milwaukee did and have a worse design .....try again

[@noelv1976]

I haven’t seen any Milwaukee fanboys complaining, what are you talking about?😂

[@dean7968]

Well, when Milwaukee comes up with as many tools as Dewalt, then they can be more competitive. They have nothing compared to Dewalt. ​@jwanilpatel3223

[@melgross]

@@jwanilpatel3223better.

[@regulusstarseed1368]

You mean the Chinese bots?

[@Shade-78]

I noticed we have the same exact kind of wedding band my friend we purchased mine almost 20 years ago

[@TheGoodTheBadTheRowdy]

Not angry. I collect tools in general. And have duplicate tools in diff places. Built a box truck/uhaul this past jan with my grandsons. Diesel swapped from a truck. Truck started life as a hertz. So its yellow! Have dewalts packouts in there for power tools, have yellow hf us general series 3 yellow boxes in there too. Have a e350 van, in red its hand tools and power tools are milwaukee haha. My son has a 392 rubicon jeep, too rich for my blood. Have a 2020 rubicon gladiator with a 5.3L from a newer sierra. Its red too. My tools are icon, milwaukee, snap on, and craftsman. Powertools are milwaukee again. Have a '22 daihatsu hijet truck I use around my property, in town. Built a toolbox for it. Quinn master impact tools mixed with kobalt. All metric stuff. Power tools are makita. Wife picked up a 2022 subaru ascent in feb, she just finished her 6.2L LTX crate swap from mast engineering with her car club. Its penzy yellow and black. Her tools are the dewalt toolsets and power tools haha. She will love these edged tools 🤘

[@tedmcdonald3377]

😎⚒️😎⚒️😎

[@johndak1]

If it angers anyone just don’t purchase it. Knife and tools don’t anger me unless they break. Just saying

[@far77fae]

next time you do a knife review start with no band aides then end with most of your fingers in band aids. and a first aid kit. it will be hilarious and nice like.

[@ToolReviewZone]

That's actually pretty funny. I will defdo that 🤣🤣👊

[@liquidrockaquatics3900]

@@ToolReviewZoneBarbie bandaids 😂

[@ToolReviewZone]

@@liquidrockaquatics3900 🤣🤣🤣👊

[@J-Colt]

My wife said you cut yourself almost as fast as I would have, lol. Thanks for video!

[@ToolReviewZone]

Hahaha

[@GS-lh2nx]

Milwaukee didn't invent the concept but their version elevated the design into the stratosphere. That is what almost everyone carries and what everyone now copies. Imitation is the greatest form of flattery. But competition is good for everyone both in design and price. Bring it.

[@ToolReviewZone]

I'll agree, but I don't think Milwaukee designed it. I've heard that workpro tools made it for them. They probably make this as well, but not 100%

[@billsedutto8824]

Exactly. Now Milwaukee will have to drop the price of the Fastback under the price of the Dewalt. Let them worry about any possible patent infringement. Not my problem.

[@jeremyboecker9236]

Lenox has done this for years

[@MtCur]

I’ve used kobalt full size flip open black razor knife for years. Thinnest one I’ve found. I really like it. I will be buying these Dewalts now. 😊 gotta try them all.

[@squirts1]

Milwaukee didn't elevate anything. Plunge lock (button lock) pocket knives have been around for decades in far superior forms. The fastback Is still just a cheap knife that isn't even close to the level quality of actual knife companies products.

[@Dougy_Fresh]

As a pocket knife hoarder, for utility these look well made especially for the price point. Cheapest knives I buy are $60+ lol. The thicker handle for most on the blade storage model is a con for constant daily carry, but that's why the other model exists. The fatter one with storage is more a heavy use guy, and the fatter handle actually gives better, more reliable grip on a job site.

[@mos8541]

?? WHO u callin Fat?.. WHO you callin heavy?... smFh

[@billsedutto8824]

When he first pulled out the pocket knife I said to myself why would anyone buy a Dewalt (or any tool brand for that matter) pocket knife when they could get a better one from an exclusive knife manufacturer? But then when he said $15 I said well that’s why. I expected it to be closer to $60 but for $15 I’d get that to leave in my tool bag/box/belt.

[@Dougy_Fresh]

@@billsedutto8824 exactly my thought. The drop point or tanto might be a good work knife for me, no big deal if I lose it or break it trying to fix something on my truck. Or perhaps losing it inside one of my ahole customers 😂

[@mikeappleget482]

As a fellow knife bro, I couldn’t help but crack up laughing when he was using that flipper tab over & over and said “super smooth action” and it wasn’t even opening all the way. 😂

[@jessebond4221]

​@mikeappleget482 hands down best flipper ive ever owned is my civivi elementum its just so much fun to play with lol this video just made me cringe that flip was worse than the kershaw swerve i keep in my junk drawer cause i hate that knife... and in truebrand name fashion for cheap knives dewalt uses... drumroll please... 3cr13 for the blades... fuckin trash

[@user-ki3dj9pu9y]

Any of these tool branded pocket knives are junk. Just look at this video, he has flippers that cant deploy properly half the time. You can get cheap China knives better than this. They are just taking advantage of people who arent knife people. Its like selling a Hart or Ryobi to a non tool person.

[@NGMonocrom]

$14.97 for that first one? Cheap Gas-station knife that likely costs 1/3 as much without the Dewalt logo on it. Reminds me of the cheap DeWalt multi-tool you can buy. (No, not THAT multi-tool that is battery-powered. That one is great. The other one.) Will never understand why DeWalt does this. Yes, we all know that when it comes to the most common three among the Pros, you have Makita, Milwaukee, and the higher-end DeWalt tools. The lower-end ones?.... Okay, some of them are quite good. Still worth buying. But these knives are below the lower-end DeWalt models. Not worth it unless you want to include an "official" DeWalt knife in a Photo-shoot featuring your latest, quality, DeWalt power-tool purchase.

[@bryan1976]

Kobalt, Milwaukee, Dewalt...all these knives are pure junk. Get a good knife from Vosteed, Civivi, Kershaw, Spyderco. Blade steel sucks, pivot sucks, pocket clips suck. These companies are actually copying higher end knife companies.

[@spideygordon2491]

Thank you for continually making entertaining and informative videos

[@stevep2448]

The button lock is a Benchmade design. When the patent was up, everyone stole the idea. Saying DeWalt is copying Milwaukee when Milwaukee is just a copy... just seems silly.

[@a1racer441]

I have the old version of the Dewalt flip utility knife and it's worn out so just in time for a replacement. I like the button action as well as the thinness of the one without the blade storage. and pricing seems about the same so even better.

[@RidgidRon]

I am a nut for a good knife and have Milwaukee hardline knives. but of course-the best knife is the one you have on yourself.

[@ToolReviewZone]

True poetry Brother man Ron 🔥🔥🔥👊👊👊

[@fishhook9277]

New to the TRZ! will have to view more of your videos. THE DRYWALL LIFT FROM MYNARDS WAS HILARIOUS & INFORMATIVE! Great job

[@ToolReviewZone]

Really appreciate that fish👊

[@MakeWithMike]

Getchu dem reviews done boyyy! Ayyy

[@txvet7738]

You mean you are correct handed…lol! Hey competition is good! Now go get mama to tend to your wounds…lol!

[@ToolReviewZone]

Haha, correct handed, I love it 🤣🤣👊👊👊

[@ericdpeerik3928]

DeWalt makes knives..... Why should that make me angry? 🤔 I demand something infuriating, right now!

[@cryptodojoau5425]

I heard it opened in some else's pocket and cut the other person's leg off?!! 😁

[@mos8541]

LOL.. damn OhiO you got my respect for NOT editing out your Ginsu incident, im waiting for the sawstop nazis... SFMF

[@ToolReviewZone]

Yeah, they'll be here soon hahaha

[@rgamore]

The big question is, where are they made? An AMERICAN Brand name should be made in the good old USA...:)

[@erictalkington5674]

Lol most American, brands aren't made her anymore. Stupid labor laws don't allow the greedy bastards to open up sweat shops here so they make almost everything elsewhere where those pesky labor laws and child labor laws won't get in their greedy ass way.

[@jimmtech]

There is a slight amount of blade play on my fastback - is DeWalt any better?

[@mak450]

Really like the blade change on the utility knives, shame there couldn't be more exposed egde, but whatever 👍🏾

[@dewaltonlyrestistrash3934]

Now that’s real nassssssssss like , now I hav e4 new knives 🍴 🫡🤣🫡

[@ToolReviewZone]

Hahaha, I always think of you when making a dewalt video brother

[@TheJourneyOfMeMyselfAndI]

Not as nice like as the Milwaukee

[@spencerhollenbeck102]

Nice knife, i would like to own one for work, but the tape notch holder on my milwaukee fast back takes the cake. It really makes ripping stuff comfortable. I can't believe dewalt missed out on it. I mean, it's really dumb not to put one on a cool looking knife

[@mikeevans565]

Clint my brother, how did you get the spiffy gift box?? I like those. I have the fastback but I don’t have these one. And since you missed my birthday in March!! Hahaha

[@ToolReviewZone]

Damn Mike, happy birthday brother!!!!!

[@mikeevans565]

@@ToolReviewZone thanks brother!! Being 50 sucks

[@9and7]

This whole copy this and copy that argument has to stop. If anything even it's true in this example it might make Milwaukee's next step better or at least keep them honest if Milwaukee was a monopoly in knives they'd eventually make one that doesn't even cut paper. Cheers to all and hope the projects across N.A. are going well.

[@JuanHernandez-pz2mx]

Humm... so, no "DeWalt not Dee-Walt" Joke? thank you!!

[@ToolReviewZone]

I can do better, I will do better 😪

[@Shaburnigdoh]

Usually the paper test for the blade is done from slicing from the outside to the inside. stabing the paper and ripping through it does little to show the quality of the factory edge. Because your technically poking the paper and causing it to rip before the edge is cutting. Kind of bypassing the test all together

[@Patricksmancave]

Nice video! Like these. Have a good day!😊

[@frank12830]

Milwaukee actually flips open.

[@user-lk8cp1df6z]

ty!

[@A6Legit]

Dang razors always wanna cut ya when they're sharp

[@ToolReviewZone]

They hungraaaaay

[@form4li7y]

He says it cuts well but he does a plunge cut into the paper instead of slicing into it from the edge as is standard. Says they open easy even though the flipper fails multiple times. He was either doesn't know much about knives or doesn't want to anger the company. I couldn't care less if fanboys are triggered by the last two. Utility knives flood the market now so it's irrelevant. Find what you like and stick with it. What matters for any knife is how it performs it's basic tasks and in this video the first two are questionable at best. Oh, and if you are going to review knives, including what specific materials they are made from helps. Especially for the blade.

[@steelvalleysportsmen7737]

Engaging comment

[@ToolReviewZone]

Haha, thanks brother

[@steelvalleysportsmen7737]

@@ToolReviewZone it's the bare minimum lol

[@gregmize01]

Somehow the Makita Gnome made that blade cut you Clint!!!!!!!!!!!!!!! He's got it in for you!!!!

[@ToolReviewZone]

He is so very pesky Greg 😪

[@tensazero]

Is it sharp? Clint: "Ouch! Yes. I cot mah self. It is sharp" Always putting himself in the line of fire so we don't have to. Such a great guy.

[@ToolReviewZone]

Hahahaz just had to test itbto make sure brother 🤣👊

[@theronwolf3296]

Years ago I was looking at a pocket knife that the salesmen handed me to try. I realized I had slightly cut myself but did not even feel it. I bought that knife. Though these days I go for replaceable blade knives. That way I'm free to abuse the hell out of the blade without remorse.

[@polisheverything1970]

Shame they don't say what grade steel they're using, when details like that are withheld it normally means garbage steel. Not worth $3 when it's just mass produced rebranded shite.

[@jmbnorth]

I will be picking up one. Don’t care about copying. I use Dewalt. 👍👍 I appreciate the info.

[@bobbytables4305]

Shit. Dewalt's site lists the knives as "Stainless". If they don't tell you what type of steel it's garbage. Go buy a Kershaw if you don't want to break the bank.

[@johnconway8492]

I’m missing a lanyard hole. I’m trying to figure out what the little screw in the slot on the opposite end of the blade mount. It looks like that would be a good slot for a lanyard

[@leonardpaciora5039]

Thanks as always Clint!!!!!

[@GoldMineArcade]

As a DeWALT guy I’m disappointed! There’s a handful of Milwaukee tools I use because DeWALT doesn’t have equivalent ones. I can’t believe they didn’t include a driver bit. If Klein put a driver on there’s DeWALT should have too. I am happy I received my DeWALT construction jacks today

[@ToolReviewZone]

Appreciate the feedback 👊

[@OneWildTurkey]

Are they really made by DeWalt or are they just licensed to use the brand name? There seems to be several 'sets' with other names and similar functions.

[@virtualxi6591]

I like the tip up option on these more than the fastbacks, but I would still go milwaukee just because the they look better imo the black and yellow looks horrible.

[@RayOchoa-w9v]

I love the knife that is not serrated it is super sharp, found that out by accident!!!!

[@chrissmith6650]

Not a very subtle colourway. That yellow makes the knives look like toys. I know they ain't. But that yellow......

[@papageo5]

Your yard is looking pretty good. BECAUSE YOU STOLE IT! I had grass in my yard first. Then when other people got grass I had to start mowing it. People stole that. Then i used fertilizer and guess what….

[@ToolReviewZone]

Haha

[@moisesrobles7884]

CLINT bro very nice bro ther in my baying list and the best I'm smashing my like botton Texas style

[@WillPower311]

I am so Appreciative that they didn't put a "wire stripper" on the utility knives when open!

[@gregryan4333]

I like the reversable clip but these look cheap like a promotional display that was never intended to be used.

[@madcarver4492]

Why would anyone be angry over a bunch ordinary run of the mill knives😂 nothing special there.

[@markvolk4032]

Just came across this channel first learn how to do a proper paper cut test second go back to second grade to learn how to talk with out sounding like you are talking to a toddler

[@jozefhudak822]

Uau!!! What a waste of mother earth ressources. And also You get overpaid!!! Loool

[@bradcanter2760]

Why would I be angry, you're headline is click bait. Try being useful in life!

[@redkey6538]

Clint I’m getting a little off subject but I wanted to ask you if you heard that the Milwaukee fuel gen4 1/4’’ impact is breaking down. I saw a video stating they went through 3or4 of them and they broke the same way,are you or did you experience any problems with your Milwaukee gen 4 1/4’’ impact driver?

[@ToolReviewZone]

I've heard some rumbling about it. I have ot personally had any issues with .ine, but it's a very good possibility that there was a bad batch released 🤔. Sometimes I think people think Milwaukee is the perfect tool company, but they have issues just like every other brand. If their is an issue, hopefully they get it figured out soon

[@man_at_the_end_of_time]

No mention of the steel, really.

[@ToolReviewZone]

You just mentioned it, thanks

[@man_at_the_end_of_time]

@@ToolReviewZone I've used my share of folding knives. Some like Milwaukee, I liked the design but the steel was too soft. I've had some from Lowes that had decent steel and it was noted on the blades. That said some of the mystery metal folders have been good enough. It is said of knife steels have properties such as toughness, edge retention, ease of sharpening and rust resistance. But no steel is the best in all categories mentioned. Also, I carry a diamond sharpener as an EDC item. Also, sometimes having a knife that stays closed is important i e when crawling under or in equipment or if lost might end up a pump system.

[@ToolReviewZone]

It's basically the same as the Milwaukee fastback it seems. Good feedback though

[@manuelmarinez9858]

Dewalt hand tools suck ! They need to improve the quality of the tools.

[@BreakingElegance]

I am a Milwauk-I-A guy but thos are REAL NAS LIKE!!

[@ToolReviewZone]

Haha, what's up Elegance 👊👊

[@merc7105]

Flip flip flip flip flip flip flip Yeah boi

[@ToolReviewZone]

🤣🤣🤣🤣👊

[@matthewbeaver5026]

Without mention of the blade steel. Gonna take a wild guess they are junk.

[@pev9950]

The flipper deployment looks quite bad, even for the price.

[@aaronpadgurskis8398]

I bought the first model you showed I'm very dissapointed

[@iw1166]

lol. Just another day for that knuckle!😂

[@edwinwise6751]

The concept is great no matter who makes , the retractable u knives were never a great design

[@jameshorigan3322]

Thanks for another great video Clint!

[@ToolReviewZone]

And thank you for the comment James!!!

[@monkeyman8265]

I don’t give a fuck I may buy the Klein one too I like them all I want them all.

[@chillios2222]

hard to find decent replaceable blade ones always looking

[@daviddiehl-gy2sq]

Husky has the same in one knife for that price. With a lifetime warentee

[@carmelolocasto1]

We need more Milwaukee lawn tools

[@israelvega3878]

Love dewalt but these are not beating the Milwaukee 6 in 1

[@farvasstache6532]

Don't feel bad, If I even look at my tools, I start bleeding. Nice review, and Go Browns!

[@ToolReviewZone]

Haha, tha ks for the comment, but go stillers 🤣👊

[@joel11230]

I don’t need a dewalt knife, not ever. Many will NOT be mad, you guys and your stupid video titles.

[@ToolReviewZone]

Thanks for the click, also...you sound pretty mad to me

[@sargent_tv8850]

I do like Milwaukees screwdriver though.

[@peterlaughlin930]

Nass

[@ToolReviewZone]

Peter 👊👊👊

[@jaydcee01]

I have one. I wish they had a smaller version

[@melgross]

Talk about copying. What I would like DeWalt to make is the small right angle battery powered die grinder Milwaukee makes. I use 2” Rolox disks a lot. A right angle grinder works well. But they’re too slow and too big and heavy. I ended up buying the Harbor Freight Warrior $15 right angle grinder (on sale for $9.99). It’s smaller and lighter and the weaker motor is fine for those. I don’t like the thumb trigger with the strong spring. The Milwaukee grinder is perfect. But I really don’t want to spend over $400 for a tool, charger and batteries for that one purpose, because, really, I have no other use for it. If DeWalt came out with one I would buy it.

[@johnsuarez1404]

Let's not kid ourselves. Anyone can tell this is DeWalt's response to the fastback. Honestly, I like it better. I just bought the one that holds extra blades. I'm going to buy the thinner version later because I collect ones I think are interesting. I didn't like how the fastback didn't quite fit my hand. I bought one and then never used it. Update: I'm going to have to return it because it exposes more than half the blade. I don't know what kind of psychopath made that decision but if i flip the blade around I should have a fresh cutting surface. I'm legitimately very upset. I thought I found the perfect knife.

[@butchcassidy3373]

I just carry a quality knife. I leave the razor cutter in the tool box but i can see where this would be handy

[@GenoMartinez93]

I'm not mad about the knives, in fact I think they're neat. I'm mad DeWalt is getting its teeth kicked in by Milwaukee and Milwaukee Jr. (Ryobi) in the innovation department

[@SilentPrepperFL]

I've been using dewalt knives for many years in my EDC (every day carry). I find myself using it constantly for pretty much anything.... from opening boxes to cutting steak.... LOL. Have a newer version similar to the one you are showing in my car...

[@frankiejdwm_edc1037]

You gotta switch those clips to tip up, and I hate that they're all serrated. But this aren't for knife guys, they're for DeWalt guys. The utility blade one seems alright, I'm on the Red Team though.

[@bigoz7]

Cool vid thanks for sharing!

[@CLD2000]

They do seem like a decent work knife. One that you wouldn't get upset about if you lost it (as opposed to your $300 Benchmade)

[@mikes_in_paradise78]

Awesome blades and cutting tools.

[@johnconway8492]

Bought mine today. The basic utility model. I switched the pocket clip to the opposite side but even though I tightened it down the clip was loose. I used my Dremel with ball end burr took it down where the screw goes in so when tightened the screw pressed tight against the clip. Then , on the other side there is a slot that appears to be for a lanyard but there is a screw in serving no purpose. So I just put a little pressure on that screw and it popped out. Then I put in a nice short lanyard. Nice 👍

[@MasterK9Trainer]

I have one of those utility knives because sometimes I have to assemble boxes all day long and well it doesn't exactly lock in place and can swing back it's so easy to open and I find it very comfortable

[@scotthealey1887]

The utility knives look good but for $15 the tanto and drop point have to be junk. I don't know why dewalt have changed to making junk now.

[@ptfdcapt3]

I've been trying for years to become a product tester for DeWalt & to get them as a sponsor. Just seems nearly impossible. But great box & review

[@jamesbrown9736]

Ok they are pocket knives with the yellow and black branding

[@ToolReviewZone]

Great observation 👍

[@rodneytyus]

The belt clip on the blade end was about to be a deal breaker for me. Since it is reversible, I like it. Makes no sense to me to have the clip on the blade end. You have to pull the knife, then turn it over to use it. With the clip on the haft end, it comes out ready to use.

[@TheKingsapostle]

Dewalt has had golding utility knives for a long time. Like at least 10 years. I have o e that I bought ten years ago. Doesn't have the same handle as that one, though.

[@jeffbooth7089]

Bought the blade storage version the same day I got the email from Dewalt . The blade release sold me , much easier than Milwaukee and you didn’t show that the blade insert is just insert in slot and push in no pushing a button or pulling on a lever . I had been using the fast back for 10 years .

[@PrinceAsmodeus]

The lack of blade storage is no bueno

[@andrewa1460]

button lock has definitely been around for awhile before milwaukee. Protech, Boker, CRKT etc. Allot of gravity knives also use some variation.

[@koosvanleeuwe2580]

Stukje blik of is 10cm ijzer