Tire change Tips & Tools

Here is how TIRE INSTALLERS ARE DAMAGING YOUR RIMS - TIRE REMOVE & INSTALL TIPS AND TRICKS
• Tire change Tips & Tools
There are a ton of articles on the internet like this one ""The tire shop damaged my wheels!!" or "My Vehicle Wheels/Rims Damaged By Wheel & Tire Shop" or "Tire shop RUINED my rims" and The List Goes On.
I made this video just to show you where they make mistakes and how they can avoid those mistakes.
Tools used
Tire Remove Edge Protection:
amzn.to/2MvSyvU
s.click.aliexpress.com/e/31kUnp9O
Tire install spray:
amzn.to/2pxGqBH
amzn.to/31BTwLL
Tire Downholder:
amzn.to/2N1w0SQ
Tire change kit :
amzn.to/35Rgrpt
Music: Tobu - Good Times
Check out my other KZbin channel / carhax
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal toolset (I have bought this one for almost 3 years and I still use it)
s.click.aliexpress.com/e/basZfJg8
-22 pieces of a removal toolset
s.click.aliexpress.com/e/_d8Y...
-7 pieces of cheap removal toolset
s.click.aliexpress.com/e/c5FEA6Uo
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpress.com/e/cdIOzPBK
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpress.com/e/cDOzHHLw
Small Electric Drill Cordless Screwdriver:
s.click.aliexpress.com/e/iAkSGXm
Hooks:
s.click.aliexpress.com/e/bGDvRimM
Flexible Magnetic Pick-Up Tool:
s.click.aliexpress.com/e/btR4NInm
Rubber Eraser disk:
s.click.aliexpress.com/e/_Bf9... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpress.com/e/CbIfLBK
Infrared Thermometer:
s.click.aliexpress.com/e/_d61...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
Check out my other KZbin channel / carhax
❗Check any car's mileage and accident history with carVertical 👉 bit.ly/3b6S8pI
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpress.com/e/basZfJg8
-22 pieces of a removal tool set
s.click.aliexpress.com/e/_d8Y...
-7 pieces of cheap removal tool set
s.click.aliexpress.com/e/c5FEA6Uo
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpress.com/e/cdIOzPBK
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpress.com/e/cDOzHHLw
Small Electric Drill Cordless Screwdriver:
s.click.aliexpress.com/e/iAkSGXm
Hooks:
s.click.aliexpress.com/e/bGDvRimM
Flexible Magnetic Pick-Up Tool:
s.click.aliexpress.com/e/btR4NInm
Rubber Eraser disk:
s.click.aliexpress.com/e/_Bf9... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpress.com/e/CbIfLBK
Infrared Thermometer:
s.click.aliexpress.com/e/_d61...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.

[@surreyhustle517]

I would pay extra for someone to take this level of care with my wheels

[@krisv8407]

This should not be an extra. Even if it's just swapping tires. I can speak to that because I am a licensed auto technician.

[@randysanchez1397]

@@krisv8407 if you’re a licensed technician you should know how to change wheels without this shit and anyone who ACTUALLY installs real wheels has their tower equipped with plastic duck heads , plastic sheath on the bar And plastic sheath on the breaker including plastic on the 4 mounts hes almost there just confused why his bar is bare we only do that for steelies

[@randysanchez1397]

@@krisv8407 yeah I am What I’m saying is regardless of the customer or the car your equipment should be that of which you can use effectively and in a timely manner aka not damaging and not taking hours for a 30 min job because you wanted to be careful lol idk to me if you’re scared of damaging it you don’t know what you’re doing and what I really didn’t understand is how he’s using these pads and plastic but a bare metal bar which is why I commented on it just makes no sense when they sell and provide the plastic counter part to then use an additional protector. You can just get the right tools for the job idk just my opinion

[@randysanchez1397]

But I know what you mean I just use different what I find to be more effective tools and protectors

[@Volksoner619]

@@krisv8407 where do you need a license to be an auto tech? I’ve been at it almost 30 years and never heard of that.

[@BELLEVERIC]

I've honestly never watched such a useful video regarding tires... I think I'll def buy all those little tools once I get my own machine! I'm in love.

[@tommylee6686]

What's the acsesories name of the big plastic tool to use to push down the rim while putting second rim on please ???? 🙏

[@hdj81Vlimited]

Buy a DQN machine, no cheap chinese. so the arm is not pulled down........

[@NinjaKirk]

If your staff puts all there tools away in the right place this would be like heaven.

[@MaNuLaToROfficial]

must be a magical staff like the ones moses used etc that turned into a snake or some s#|T

[@rhgks301]

Thank you for your tip. Thanks to your information, we know how to prevent damage to the customer's wheels when installing or removing tires. I'll look forward to more informative and good videos in the future.

[@alanw5812]

at 1:15; should remove the bar first, then turn it will never hit the rim !

[@gregoryclifft7398]

I would definitely take my wheels to this guy.

[@AdamAdam-qz7qt]

0mi n i i p0

[@randysanchez1397]

With that metal duck head That’s a hard pass

[@NandhaKumar-tz7dp]

He might teach how not to do it with your tyre on YT😂

[@yeilynbrenes3886]

@@randysanchez1397 qqqq

[@rd32995]

Yeah, not on every wheel that comes thru.

[@roberthayes5037]

Absolutely awesome 👏 I definitely ordered these accessories to change my tires. Great video, thanks

[@tommylee6686]

What's the acsesories name of the big plastic tool to use to push down the rim while putting second rim on please ???? 🙏

[@How2Wrench]

Great video!

[@shane_7even_ten569]

So you can spend money on the “tools” or you can use some shop rags to protect the rims, all the years I’ve done tires I have never had to pay for a rim repair.

[@TheTuxmania]

Have worked as a tire mounter. Your skillz are impressive :)

[@Geazbeat]

These are not tips how to do it. These are rules!

[@fila1445]

I would gladly obey those rules... If my boss wasn't so fucking CHEAP !

[@Vipox92]

@@fila1445 Ah yes, I think 99% of tyre shops have this problem, I'd love to have the best gear, but still doesn't mean it can't be done to perfection

[@christiandepew2812]

@@Vipox92 yes I do this for a living and my boss uses none of those extra tools we just use a good ol tire machine and a flat bar and I’ve been putting tires on that way since I’ve been doing it

[@deepteyiz7515]

tire4coin have best prices

[@ayesharizvi9617]

When it comes to the best quality at best price, I always prefer Michelin tyres as my experience with them since 6 years has been amazing. Completely satisfied!

[@mikem5475]

Sellout

[@HuuTonyTran]

Nah Michelin is overpriced garbage mate nothing beats Japanese Quality & Reliability Bridgestone/Yokohama/Toyo Tires 💯

[@tommylee6686]

What's the acsesories name of the big plastic tool to use to push down the rim while putting second rim on please ???? 🙏

[@officialhellotravel]

I recommend this video to all garages! 👌

[@ericbelanger7373]

That is the way i change tire too that is the right way to do it the right equipment for the right job scratch free too glad to see other people that do it right too Eric

[@cosmicallyderived]

This is the kind of know how every tire shop needs to bring to the table. Attention to detail.

[@shawnm.1540]

Never seen one shop use this level of attention to detail.

[@MaNuLaToROfficial]

its because they know they're being filmed lol

[@davefgs2399]

"No wheels & tires were harmed in the making of this video"

[@pashayt1746]

tire4coin is best for tires

[@denisdalumpienes9859]

This video nice demonstration for business purpose only not in actual works in shop ..Im been in tire business for almost 40years ..Its big difference in actual work in shop.

[@K2KVLOGGER]

I only buy my tires from tire4coin

[@MuhammadKhan-yl7mt]

That’s call a 10/10 job. Well done

[@Wowmechanics1]

Expertise Revealed .. A Skillful Showcase

[@go5582]

hi . what a great video! finally a video thats easy to understand. Thanks

[@abcefabcef1239]

i got my tires from tire4coin

[@urielgarcia8625]

I've never seen any shop use a lot of the small items

[@oscarluna4219]

very good and very well explained just a suggestion at the end is to inflate on the turntable

[@boba.com1230]

I buy only from tire4coin

[@blaketinsley290]

Lmao he would have broken a tpms sensor so many times if there was one on that wheel

[@slickhitler]

I'm 3 days in after not fucking with a tire machine for 12 years and even I thought that

[@_truth_finder5378]

Nice scratch proof work! 👍👌

[@GiacomoFe]

I have never seen anyone using these simple tricks and tools. Several times I had to ask to fix my rims because of their scratches.

[@TheArron86]

Lies

[@Volksoner619]

How much are you paying for mount and balance? If it’s free install, you get what you pay for.

[@GiacomoFe]

@@Volksoner619 it isn't free at all. Not even cheap

[@SimsonBatubara]

very good tips

[@jschavez99jc]

Shame how some places don't even have access to this type of equipment. Most shops will do anything to save $, and cutting equipment costs is at the very top of the list.

[@man0fuzion135]

Bro, just a curiosity, how much do you pay to disassemble a tire and put a new one?

[@TheMustangs05]

@@man0fuzion135 at my shop it’s .6 of an hour labor paid to me (maybe 10$ if ur well paid) for mounting and balancing a set(4tires). Sadly don’t pay enough to be this careful.

[@man0fuzion135]

@@TheMustangs05 here in brazil we pay 10R$ per tire, 4 tires is 40R$ , if were truck tire like a Hilux or a ford ranger we pay 20 R$ per tire

[@man0fuzion135]

But this value is for the store and not our pay

[@man0fuzion135]

We earned moreless 50 R$ per day

[@asintonic]

love you video and very helpful thank you. One thing what are the best types of gloves to use for a 8 hour full day? thanks

[@anekahobi1539]

Amazing😍

[@DIMTips]

Great tips

[@kennethbarber8696]

Bought a set of ET Mags and tires in the early 80s. When the tire store put the tires on the mags, they scraped large sections off the lip of the new wheels. I complained to the store manager and his reply was...... yes I know, the guy is new. 4 new ET mags with the lips scraped off. Warranty doesn't cover new tire installation.

[@Volksoner619]

Why are you bringing up old shit? That’s 40 years ago get over it.

[@mhughes1160]

Great video thanks 🙏

[@johnyaceyko9775]

I have been using a Coats 15aa for years, I have to agree that aluminum rims need to pinched, not stretched. A extra lift is important, so the rim doesn't get damaged. Awsome share.

[@emil3077]

Dobra robota. A co najwarzniejsze bardzo dobre opony!!! I to się chwali 👍👍👍

[@DK-oi8zt]

Chujasie znasz

[@emil3077]

@@DK-oi8zt chuj to cie zrobił ale nie dorobił.!!!

[@joeishere500]

Thanks for the tips

[@imagingteam]

Quality service right here folks

[@veepatel0101]

If only firestone followed these steps my wheels wouldn't have been scratched and they blamed me for it, I made a mistake of not taking pictures of my wheels before letting them replace my tires. Next time I am def going to bring my car washed and cleaned and taking pictures because tardy people never take the blame. This video proves if used right tools or even proper training wheels would come out without nick. Thanks

[@MrLiquid323]

Go cry elsewhere , crybaby

[@ConXious45]

Nice looking out

[@weltonsantospontes2798]

Muito bom Obrigado por compartilhar

[@sankettoppo3274]

Good information

[@Bultraland]

Belle vidéo, Vous nous vendez du rêve là 😍 Malheureusement la réalité est loin d'être celle là 😒😬

[@tombob1469]

solid tips!

[@lindaleonard3561]

great tips

[@alexresendiz5101]

I use a Corghi Artiglio 50 for Mobile Tire Service which makes it much easier compared to the old Hunter machines to mount/dismount tires but I could def see myself 2-3 tools from this video. Anybody got the tool links for purchase?

[@sinankoyuncu3150]

Nerde boyle usta Helal olsun adama alcagi patayi tam anlaminda hak eden insan

[@OMGGITSDAVID]

I wish all tire shops did this

[@aminmian7291]

I say good luck since many places especially where there's snow around. They have laws that it's a mandatory to swap into winter tires by a certain date, as that comes closer, nearly every shops would be bombarded by tires (even hiring temps) to deal with the hundreds they do a day.

[@josedomingosalinas2467]

Excelente vídeo.

[@melapelas8465]

I can do all that with out the fancy tools, but definitely a good video

[@antoniociampo7698]

Davvero soldi ben spesi... Per un cambio gomme...!!!!

[@brewcrew5854]

i been changing tires for 30 plus years i cant count how many 50 k cars come in and never been washed - they aint gonna notice wheel weight glue . but it is a great service quality !

[@azkhatambalbanchanel2763]

Waow tutorial good job Mr

[@essiestevens9963]

Helpful

[@jnexplorationuk315]

I’ve been in the tire trade for 17 years that’s exactly how it’s meant to be done

[@simoncook1885]

Yeah but who does?

[@wwjnz9263]

I've recently had my tires changed at a local tire shop. They definitely did not watch this video.

[@mangluisvlog6926]

Nice job same what im doing too 🥰🥰🥰

[@ty11ord46]

This is a great video I give you that, but for a fast fit tyre garage we own doing 40 tyres a day just In the bays is way too slow and would be so time consuming. We take levels of care also just much much faster

[@radeksobieraj5516]

Super 👍

[@samz9295]

Do you think they have time enough in center auto?

[@huntawpn]

You will never ever ever see this level of care at any shop that offers economy level tires, because it costs extra.

[@confidentlocal8600]

I suspect 0:58 is what just happened to my wheel when I got tires installed. Arc-shaped scratches near the edge going halfway around the wheel.

[@Suicid3mx3]

Where can I get that rim protector on a string

[@isaiasvalera991]

Me gusto la herramienta de la # 5 como se llama ?? Y donde se consigue ??

[@olenaerhardt7725]

Is it much more difficult to change a tire (I mean to replace it completely) at a low temperature? I did my 1st tire, balanced it, and ready for the 2nd one, but the temperature here dropped. I saw in one film how they heated the tire w/heat gun, but how much, where exactly, all that is kind of vauge. Also in that film they were working on tractor tires, I have just regular passenger car (R16 tires). My HF Tire Machine is mounted outside, while it is snowing I won't do anything, but tomorrow it will be clear. So I decided to do a small research on the subject meanwhile. At what temperature you can change tire more or less comfortably, can you do it @45F, or it is too low? My main concern is that I can tear the tire or burn it w/heater gun. Thank you for a great film, but would you do that procedure at a low temperature?

[@DocumentaryHub]

Anyone who ever worked in a tire shop is cringing watching this video. This is just an ad for useless tools.

[@efthimisav2714]

Exactly

[@frontlinemedia4270]

What do you do if the tire beads are narrow between each other. Can't get sealed enough to seat the beads???

[@MrVM41]

What was that steam thing on the last 15 seconds of video? Getting the tyre on? An ad was blocking the screen, thanks

[@austinbass6728]

Nice

[@MOTOBUY-mg3kq]

good so much

[@user-nj7ec6fj6h]

Това което показвате отнема много време за работа.

[@josealan7639]

Mano aqui no Brasil não tem borracheiro desse nível de vc falar alguma coisa ele complemente manda vc ir pra outro lugar precisamos de mais profissionais assim.

[@eldomador0557]

Así da gusto,como deberían hacer todos

[@khrprod]

at the same time i got so much brain hurt from this but at the same time relief!:D

[@commodore9986]

Цены на шиномонтаж и так высокие,а с такими технологиями ещё и космос будут!!

[@Taganskii]

Технологиями? Обычная аккуратность и пара кусков пластика. Хотя да, для таджика какого-нибудь это космическая технология

[@its_only_karma7440]

Good luck doing all that in the rush season

[@MahloHumble]

THANKS BROS, VERY HELPFUL VIDEO

[@jardsonfontineledossantos6837]

Como eu faço para adquirir os produtos de vocês

[@izzzzzz6]

everyone loves that last one

[@zach1392]

What's a good tire machine to get for enthusiasts?

[@aaronguenther3577]

OK so a tire shop messed my wheels up but are denieing damages saying it's curb rash yet I've never hit a curb and the damage is on the bead area

[@arseniofj3239]

I am here because i want to setup one garage business. Any tips for a venturist?

[@Sabipedraza]

On the 1st rule you already messed up because the valve can break if you try to break the bead in the position. Also just basic liquid soap is great to as a lubricant no need to pay extra for fancy stuff like that

[@vladimirmuzhchinin8302]

Hey! What about s small green dot on a tire, on new one usually!!! Why you haven’t mentioned it???

[@mazzahussain2411]

What’s that tool called you used to push the tyre down with?

[@uchiraperera2371]

Ghank you very much ❤❤❤🤝🤝🤝

[@h.l.a.chuckie8709]

They need this lessons here

[@brabus343]

Nice video for someone who will never get to be doing it lmao... otherwise anyone that did tires would know this already

[@Tierone1337]

Nope, most don’t know about the tools used not to scratch up the wheels cuz fuckers at a shop scratched up my rims exactly where shown in video.

[@dodgeramsport01]

You had to learn at some point

[@JB-yd2ge]

Wish you could write down the tools you used.

[@bruhmoment802]

I can avoid scratching the wheels without using all those plastic things

[@DFCGarage]

I the workin Skills are important as well

[@ballsoutperformance]

Exactly. Same here

[@ballsoutperformance]

@casey escobar 😢😕🙁😭

[@ajaythattiot2991]

@@DFCGarage sir what is the name of # 4 item applying on tyre

[@DFCGarage]

Here is a link to the product used in the video www.amazon.de/gp/product/B0055Y6M7Q/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=1990090-21&creative=6742&linkCode=as2&creativeASIN=B0055Y6M7Q&linkId=8bb17c9a9331d12a62c2dc06e8d4f624

[@shoaibkhuzdari1907]

Super

[@luisbaldi6264]

Hahaha. The comments here... If you really care for your rims then you should like this video. You will also have to pay extra for a service this nicely done. If you care, then it's worth it. In reality, most shops don't make money from tires so they want that job done fast. If you are good at it then you ahould be able to do it fast and without damaging the rims. Now of course if you have nice rims as a tech you will take it slow. But as a mechanic, a really dont care what you do to my rims as long as you don't scratch the face on them and or damage the tire putting on. Also, match the damn yellow dot with the valve stem. It pisses me off when people don't get get that straight .

[@rodrigoburgos6190]

Algún link para comprar las herramientas?

[@michaelpierre-davis993]

Hi where can I get that black tyre lever in your video ending 8655 I am in London Uk

[@steveturnbull9542]

ebay or put into google

[@joea1746]

Dang watching this really made me think those well known named tire and wheel shops and their young kids installing new tires on new wheels. 😬. I have custom painted wheels and often wonder what if I need a tire repair how can I trust those shake and bake tire/wheel shop from scratching my painted wheels. After watching this video now I know why the custom wheel paint shop recommends to bring them the tire and they will carefully remove and install/balance the new one on the wheel.

[@sridharsri5681]

In chennai is there any shop where they do like this professionally

[@user-nj6rv8ml8x]

Uyyy si fueran así las cosas en México!!! 🥺