comment if this helped you or if you need more help and ill respond as soon as i can, subscribe for more and follow me on instagram @davidandersonofficial how to lace a four cross wheel: • How To Lace a 4 Cross ...
Пікірлер: 297
@daobmx2 жыл бұрын
here is a how to TailWhip! also if you would like to see my lacing video for a 4cross wheel check the discription! kzbin.info/www/bejne/moGaYmOLnr-hkLs
@ultimatewarrior16122 күн бұрын
Just built two wheels on my lunch break, first wheels I've built in nearly 20 years and the BEST tutorial out. Last time I used G-Sports guide, but this is so simple and so easy. Thanks dude
@daobmx3 сағат бұрын
@@ultimatewarrior1612 awesome!!
@anvilhead595 жыл бұрын
You make it look as easy as it's supposed to be. Twisted hub the wrong direction though. The spokes converge inside the valve stem hole, making it a little crowded to air it up. Twist the hub the opposite direction and the spokes will be practically parallel inside the valve stem hole.
@robertmcclymont85505 жыл бұрын
Yes, remember the holes are 'slight angle. I forgot that so now we all know.
@itsssjustzach2 жыл бұрын
This video saved my butt twice,1st time on my own wheel and just tonight on a friend's wheel,every step is so well explained in this video it's basically impossible to mess the job up after watching it
@joshstoyles17973 ай бұрын
Its 2024 and this is still the best how to video iv seen in awhile, seriously thank you!!!!
@pvawterpvawter Жыл бұрын
I have watched about 7 lacing videos and none have made as much sense as this one thank you.
@dksittingduck4 жыл бұрын
This tutorial blows away all the others I've seen! Thank you.
@daikonoshinkomaki4022 жыл бұрын
This was the only video that helped me. Not sure it has music or just "over over, under, skip a hole" mantra.
@lovebbqnoles367 Жыл бұрын
This was Awesome! I also love the 🎵elevator Interlude Music🎶🤣
@foreverhungry84 Жыл бұрын
i used this guide to build a mountain bike rear wheel. you rock dude.
@user-qb1dc2fc4o4 ай бұрын
This is the best video on lacing a 36 spoke wheel! Thanks, really appreciate you!
@alanparadise31395 жыл бұрын
This is the best video on lacing up a wheel .And I seen many videos here.The best step by step instructions
@holybikesBMX7 жыл бұрын
Thanks for sharing this motivational informative instructional video! Can't wait to lace my own wheel one day!
@daobmx7 жыл бұрын
Lucas Lage its kinda hard for scooter wheels, but good luck!
@dennycelestinohybridspecies4 ай бұрын
I have to say you have the best how to lace a bike rim video PERIOD. And I haven't done this since 1988, and this will make you laugh, it was with a 48 spoke Araya chrome rim lacing a coaster brake when I was doing my BMX freestyle back then. I just realized how you have a lot of awesome freestyle stuff, I'm 51 and just have an E mountain bike that looks a lot like my 1988 Haro Master frame that started out as transportation to get around town, and then adding aftermarket parts like in the old days started tricking her out, new brakes, Shimano DX type pedals, and suddenly I'm doing old jumps and easy street riding. Until, jumping my favorite tree root growing under pavement in a parking lot, I guess I had a weird angle, I bailed, and my backrim landed first, killing the rim and motor combo, so I thought. Then buying two different rims online that just wouldn't work, an old fashioned straightening of the old rim by placing it on a flat surface and then bending on it a bit like the good old days, and watching your really easy and simple video that you made perfectly because a lot of these other videos are really getting confusing when it come to flipping the rim over, and lacing it the other way. And then I finally got the rim together and it worked pretty decent except it had a pretty good kink in it still, and using my old fashioned rim truing memory, it's just about perfect with a little wobble like I road ramp and hung up on the back wheel. Thanks for your incredible videos I'm gonna watch more of them. I got a lot of BMX bike builds and old fashioned 80s freestyle heroes of mine on my playlist like RL Osborne, Eddie Fiola, Martin Aparejo. It was cool to see those guys ride back in the 80s in person, like the AFA freestyle Masters competition in Tampa in 1988. ESPECIALLY when me and my buddy Frank that rode at the same bike shop in Lake Mary Florida got to meet team Haro with Ron Wilkerson, blow Brian Blyther, Dave Nourie and the guy Dave that was a little older than us that assembled bikes and ran the bike shop a bit would drive us there said some guy named Ron called the bike shop and wanted to know some hot riding spots in Orlando and we joked and said Ron Wilkerson and laughed. You should've seen the look on her faces when it was actually Ron Wilkerson and we saw him and rode with all of them. I wish I didn't sell my GT Pro Performer frame and my Hutch Pro Raider frame a couple years back. Awesome channel man!
@myoldmanmarlee Жыл бұрын
I looked at a bunch of utube videos and they where full of useless information and drag on forever. This video is simple to the point and super cool..thanks
@MegaGrim966 ай бұрын
Thank you, much better than the other professional videos I've watched
@PilotMcbride9 ай бұрын
6 years down the track and you’ve mostly likely got your own kids ready for riding 😂😂 I’ve now been roped in as head bike mechanic for my grandkids ranging from 8 to 18. All this after looking after our own kids and doing my own repairs during my formative years 😂😂. But the big difference between now and my time is that back then, to have a wheel ‘relaced’ was about $2 at the local bike shop. Now, before you say “holy crap that’s cheap”, we’ll, back then, $2 would buy you 10 full beers! So dad wasn’t amused, he like his beer 😂😂 With my own kids I did all the work, including trying and welding frames as well as everything else and the local bike shop looked after the wheels (except punctures), our local guy was a good friend, quite old and a former Olympian, he actually passed away in front of our place during the Olympic torch relay for the 2000 Olympics after doing his part, very sad. Nowadays I’m all tooled up, but lack the lacing experience. Thank you making this video, you did well, easy to follow, really enjoyed watching. All the best for your future. Cheers from downunder 👋👋👋
@MrWonkaPop364 жыл бұрын
This is the only video that helped me lace a wheel I've watched multiple and they all seemed like rocket science this is the best you helped me lace my first wheel thanks brother. Gonna save me lots of $$
@lovethemguitars2 жыл бұрын
laced my first wheel alongside this video. thought it was gonna be much harder, thank you very much
@Ahes1638 Жыл бұрын
Dude we used to ride back in the day for a little while you were traveling Florida around 2016-2017 bro it’s awesome seeing you on KZbin I just got back on my bike again
@daobmx Жыл бұрын
sweet dude! awesome
@k_sae1676 Жыл бұрын
Thank you so much. All the other videos are way too drawn out and complicated this is super simple and to the point I was able to lace a wheel in like 30 min
@daobmx Жыл бұрын
awesome!
@jmmoto8973 жыл бұрын
You should make a " how to true a bmx rim" starting from after lacing
@johnbeaver39112 жыл бұрын
First of all, thanks for uploading this video. I am going to replace the hub and spokes of my rear wheel. This is the best video of lacing a wheel so far I have seen. The "over, over, under, SKIP" trick is easy to remember. And the small wheel is good for teaching this work (and cute too). This video is very helpful, I appreciated it.
@vibeandride29846 жыл бұрын
I know it's 2am and I'm high but I think this is one of the best lacing vids on KZbin and you explain it so well... I just destroyed my kink Orion wheel and I have another nice rim but it's not laced so yea ... thanks this vid helped so much
@patricksepicjourney718711 ай бұрын
Bro, you saved me 100 bucks and 5 days of no bike. Thanks brother, much appreciated!
@wishbone9478 Жыл бұрын
Great video, Thanks for sharing your nolage, Completed first laceing rebuild today. It took me 5 goes be fore the penny dropped, Man from Ireland says thanks. 🍀
@StreetDreamzTT5 жыл бұрын
Thanks man. You don’t make it seem intimidating like the rest of guys. Great video.
@scottdbartender2 жыл бұрын
Thank you David! Spent hours trying to lace one rim by looking at the other tire for HOURS, kept 'lacing wrong' over and over driving me nuts! Watched your video, and laced that F***er in under 15 min 1st try! You da man!
@Alion.1475 жыл бұрын
One of the best tutorials on how to lace a wheel i have ever watched Thank uu Soooo much 👌👌
@TheLoneWolf_andCoyote4 жыл бұрын
thanks for this video I hadn't laced a pair of wheels since 86' and had totally forgotten how, I watched your video twice and laced a n.o.s. pair of ACS Z rims for my 85 Hutch Trickstar showbike. Your video was very informative and made this task very easy.
@brandonhatch18483 жыл бұрын
Man I gotta say you killed it! I laced up my wheels in under 20 minutes each all thanks to your vid. 👊🔥🙏🙏
@codyanderson11475 жыл бұрын
Awesome vid, ive only laced one wheel before (terribly)probably 5 years ago. I watched this got my elite hub laced and trued straight as an arrow like ive done it a million times. Your a legend 🤘🏻
@DOT_Sounds Жыл бұрын
Thanks bro laced my first wheel using your tutorial
@littleladyip Жыл бұрын
thanks so much!! I spent all of over an hour watching videos and was lost still. thank you so much!!
@genersay10373 жыл бұрын
One of the best lacing tutorial i watched
@ginogetsshreddy_mtb866 жыл бұрын
This video is great man thanks. Gonna use this to build my wheel once my hub comes in.🤘👌👍
@bryduhbikeguy5 жыл бұрын
It's 2 years,and Priceless.I've had a rim setting,that didn't go right.I didn't know to Reverse on the second lacing.Thank you!(What I watched,the dude went so quick,I didn't see the reverse in lacing for the second side,and my spokes are about an 1" too long..LOL)
@hugomundo48269 ай бұрын
Thank you mah dood. Wheel laced, trued and ready for shreddy!
@fiditunka5 жыл бұрын
just laced my first pair of wheels today. piece of cake thanks to your awesome video. thanks and greetings from vienna, austria. :)
@laurenceblack7181 Жыл бұрын
Thanks, followed your advice, first time I've done a bike rim. Really appreciate your blog.
@tyroberts5435 Жыл бұрын
I’ve just bought new rims and I get the tomorrow and I got told this video is really good and easy to follow so I’ll find out tomorrow.(not trying to spend money on someone else doing it)
@tyroberts5435 Жыл бұрын
just finished building thank you so much super easy
@haydencarter31255 жыл бұрын
Thanks heaps finally got it laced up!!
@Sosidedan4 жыл бұрын
Sick music bro. Very old world, anonymous lounge on a corner, two very large fellas out front, definitely not softies, smokin a cigar, see thru socks wearing, pompadour sportin, 4 Cadillacs illegally parked on the street in front, type sounds. Very cool! Oh and about your video: one of the better ones I've seen. Definitely trying this and avoiding excess spending on lacing wheels. Thanks bro.
@rgw1380rw4 жыл бұрын
I successfully laced my first freecoaster to my rim today😎👍! I'll save this tutorial for when I receive the correct front hub that I ordered.
@srs_lol6 жыл бұрын
For me this is the best video for lacing on KZbin !!!! Thank you very much
@daobmx6 жыл бұрын
Sharokis thanks for the feedback! Any more how to’s that would be helpful i would be more than happy to make!
@wishbone9478 Жыл бұрын
Great video, Thanks for sharing your nolage, Just completed my first build. Man from Ireland says thanks.🍀
@PrinzSalazar3 жыл бұрын
So easy to understand cant wait to lace my own wheel :)
@Ford-di6fz Жыл бұрын
Thanks David , honestly I have watched a number of tutorial videos.... your video is the best, easy and clear.
@daobmx Жыл бұрын
appreciate that !
@colinbmxer36247 жыл бұрын
thank you very making this amazing video. it has helped me so much and I'm in the process of lacing my cassette hub right now
@daobmx7 жыл бұрын
Awesome! Glad to help 🤘🏻
@ZURCALEDEINOR4 жыл бұрын
Thanks Dude.....it is the best tutorial I ever watched regarding lacing wheel....so easy to follow and understand...More Power..
@djkwikkut3 жыл бұрын
Just watched this while i worked on a new setup for the first time. Very clear and thorough and helpful to do the job right the first time. Thank you for making this, i found it to be exactly what i needed.
@daobmx3 жыл бұрын
awesome, happy you could do it!
@djkwikkut3 жыл бұрын
@@daobmx thank you and thanks again for taking the time to help
@blockboy_mike Жыл бұрын
From all the videos I’ve watched today on this topic yours is the best , made it so simple and easy for me to follow and not get stressed. Thank you so much and love from upstate ny
@robk91802 жыл бұрын
Dude this literally was so easy and saved me from wasting money i wanted to do it myself and you let me hell ya man !!!
@GebrielAlvez_043 жыл бұрын
Thanks for this clearer explanation!
@rolandorich40145 жыл бұрын
Best example so far thx bud
@naturalherb6 жыл бұрын
thanks mate. great video
@falconx57442 жыл бұрын
Mate i have to say thanks cause you made it easier than any of the other videos on youtube for me, and its my first time lacing a rim, so thanks heaps 🙏
@ahsanfinance2 жыл бұрын
Thanks for the tutorial mate! Very easy to follow!
@Hertog_von_Berkshire6 жыл бұрын
First wheel is correct. In the second wheel (the demo build), the valve hole is not correctly boxed. It should be between two near-parallel spokes, thus providing room for an inflator. The mistake happens on applying the twist, before the third set of spokes is inserted. Always twist in the direction that takes the spoke next to the valve hole AWAY from the valve hole, not across it.
@godnnat2 жыл бұрын
Great video, re-building my Ukai speedlines with high flange suntour hubs .. thanks bud
@tonyconnors13424 жыл бұрын
Very easy to understand i have wanted to do this for a long time thank you so much for your video.
@ChefDrifts3 жыл бұрын
always building my own wheels from now on, best tutorial on youtube by far! thanks for making this so easy to follow brotha!
@daobmx3 жыл бұрын
thanks for watching, happy it helped!
@yvettehopkins44004 жыл бұрын
Awesome video, thank you
@nickdangerous21143 жыл бұрын
Thanks dude. I am building a mini harley from scratch and I only know how to do a hub motor but not the regular front wheel. This video was a lot of help, never thought id be able to lace a wheel so well, as if it's straight up from a store or factory!
@daobmx3 жыл бұрын
awesome!! glad it worked for you
@bigboizbigboiz39743 жыл бұрын
this actually help so much thank you sir
@kieranhamling42502 жыл бұрын
Thank you so much I’m for sure dropping a follow
@davidh63002 жыл бұрын
Love it, so nice and simple.
@Kumari_448 ай бұрын
Thanks sooo much man!! You made this so easy to do.
@jackhwthorne4 жыл бұрын
This video is awesome, built my first wheel and full Tru in less than 45 minutes 😈😈😈
@pedrojr.hangad21475 жыл бұрын
Thank you... so easy to understand...!
@glennevans25663 жыл бұрын
Great vid. Thanks!
@wateryketchup74222 жыл бұрын
This is the best and most helpful one thank you
@ralger2 жыл бұрын
Good descriptive video , my old mountain bike was a bit of bear to respoke as nipples have pretty short threaded area but a few retrys and it's done ☺
@blennertattoo58623 жыл бұрын
Cant stress enough how comprehensive this video was made in comparison to others related
@13134m4 жыл бұрын
Very good vid bro!
@chevroletbelair14 жыл бұрын
best explenation video that i found on KZbin (thanks)
@albertjosephrufino98834 жыл бұрын
So far this is the best tutorial i have seen. I wish you could made a video in how to do it by putting all spokes first on the hub before lacing it into the rim because it changes the process but still goes to the same outcome. In this video it became under,under,over while in other ways in goes over,over,under.
@martinbourget22976 жыл бұрын
thanks for this tutorial bro, that gona help me for my first building wheel
@daobmx6 жыл бұрын
M4rty Cub3r hope it turns out nice
@octav715 Жыл бұрын
Great video. The practice is the key...
@familyengineering55913 жыл бұрын
Great video! Im lacing up some new rims for a 1998 haro blammo with original hubs
@ashphoenix95953 жыл бұрын
nice video , it helps me a lot. thanks I learned much.
@tri-mak17524 жыл бұрын
Thanks David!
@MrThorMNFinest5 жыл бұрын
Classic skater look 😎💯👌
@robertmcclymont85505 жыл бұрын
I say for a young lad you very clear explain and show how to lace wheel CORRECT. I manufacture the alloy rims. You lace. Part YOUR CV!
@billmarshall63212 жыл бұрын
Thanks man ✌🏼
@tuxnoel3 жыл бұрын
Thanks bro. Only useful video on this I found.
@PedroJannini2 жыл бұрын
You’re a legend thanks a lot!!!🙌🙌
@Washy3063 жыл бұрын
Hey man thanks I used this as a tutorial while re-building my first wheel. Saving some money and fixing some dump finds up
@daobmx3 жыл бұрын
happy it helped!
@jmmoto8973 жыл бұрын
22 minutes I laced my Wethepeople helex freecoster awesome video 👌
@oieyes Жыл бұрын
Thank you a million million times 😉😉
@kennethsiskin99586 ай бұрын
appriciate this!
@Tony-ts3ip3 жыл бұрын
Just about to try this . Thanks
@daobmx3 жыл бұрын
good luck!
@bjbunes68126 жыл бұрын
nice, I needed this video!!!
@bjbunes68126 жыл бұрын
do you know how to fix a flat spot on the rim
@vibeandride29845 жыл бұрын
@@bjbunes6812 get a new one
@BGardner332 жыл бұрын
I had to do a 2 cross pattern cause my front hub is kind of small but this video still worked great 👍
@dylanbradley62133 жыл бұрын
Thanks got mine done today after stuffing it up in the beginning but watched this and figured it out lol
@guod1183 жыл бұрын
Thank you. great video. I gotterdunn!
@MLFranklin2 жыл бұрын
Very nice instructional video. I plan to do this tonight with my 1995 vintage Hardrock Classic. A few nipples have broken due to corrosion in the past month or so, so it's time. EDIT1: Just snipped out the old spokes. Now I'm committed. EDIT2: Just laced it up with new black spokes. Pretty easy thanks to your video. Now I'm hoping you have a video on truing and tensioning. :-)
@salgiallo74583 жыл бұрын
Awesome video! Was super helpful and saved me a bunch of money. Great job!