DHCP Relay Agent Lab

In this video, you will be learning DHCP Relay agent. This will let you allocate IP addresses in other Broadcast Domain.

[@haiderkabibo7693]

The first time when I see the video, I thought the Rock gave us the lesson of DHCP

[@xulin5467]

exactly why I came in

[@Med-k8]

lol

[@anvitasingh5]

Never saw a better DHCP Relay tutorial ! Subscribed.

[@CanecaProductions]

Todd Lammle messed up big time on his DHCP Relay configuration from the Lynda videos. He left the whole RIP configuration out. Thank you Laz!

[@suzzvlogs]

great video, i just followed and got the dhcp relay running in packet tracer, thanks

[@lumumbahasan3355]

Enjoyed the video just got your book last week.

[@ethnotechnic]

Very helpful! Couldn't figure out why my relay wasn't working and realized my Router1 had no clue about the other network (the reason you setup RIP), so it had no way to get that Offer back to the client. I felt so dumb haha. You're so right that if you don't have a good understanding of IP addressing/subnetting, good luck on the test, let alone in the real world. Appreciate the video!

[@thenetworkingdoctors]

Glad I was able to help!

[@hamzataleb6002]

Thank you so much Laz. I'm so happy that i found this video very helpful. Great Explanation. I like when you yell LOL Awesome

[@thenetworkingdoctors]

You’re very welcome...but remember that I’m not yelling, just speaking loud and clear 😉

[@webtextube6664]

Thank you very much sir, That was amazingly awesome...I follow you

[@contentmatters9457]

Such a crazy explaination by changing the voice decible. Really good

[@thenetworkingdoctors]

Thank you 🙇

[@jamiew.lacroix7055]

You sir are a natinal treasure, not only is this information presented is a way which learning is now secordary to getting it done for real, thaks as always to you allso thanks for your constant vigelance to the gaining of knowledge.

[@thenetworkingdoctors]

THANKS BROTHER

[@christianjavier1776]

SUBBED! To the point information. No fluff.

[@thenetworkingdoctors]

👍

[@bachont]

I watched this video with my headphones on and now my ears hurt! :-D But thanks for the great video, it was very useful for me! :-)

[@netpro4379]

Awesome! thank you for your video sir

[@BullCraftMaxx]

Excellent video!

[@needsomehike]

at 8:50 ctr+shift+6 "to break out of that"...damn it i have been looking for that. thank you.

[@vipulzala7293]

another way is ...no ip domain lookup

[@hamzataleb6002]

Great catch.

[@rohanofelvenpower5566]

@@vipulzala7293 that's the long way

[@MrSanesh22]

Hi Doctor, its very clear and easy to remember the way how you teach the concepts. Thanks

[@thenetworkingdoctors]

Thank you Sanesh... that is my goal!

[@thenetworkingdoctors]

Thank you Sanesh... that is my goal!

[@nikhilwagh8223]

Thanks It's very helpful.

[@skinteg]

You yell and act like we joining the army hahahaha keep going ! Commandant

[@thenetworkingdoctors]

I'm just speaking loud & clear. :)

[@daniejames2591]

I just love this guys shirts lol

[@thenetworkingdoctors]

Thanks Danie!

[@ChanNorman]

What software do you use to draw the diagram? I like it a lot.

[@joshuabarbosa4824]

Does this work if we implement NAT on both LANs? I configured the DHCP server with a static NAT map to a public address. Also, the clients in the other LAN were configured through NAT with the overload command. The IP addresses wouldn't get assigned. Any help?

[@muhammadhakim6038]

amazing!!! thanks a lot

[@thenetworkingdoctors]

You are welcome!

[@bennyrtr180]

If Router R1 & R2 is replaced with a layer 3 Switch, will they act as same as router does. Will they not pass the broadcast? in that case, is there a need for IP helper in Layer 3 switches as well?

[@tonyparka78]

This guy is definitely prior military

[@thenetworkingdoctors]

Yes I am, and I speak Loud and clear. If you sesitve ears turn down the volume.

[@tonyparka78]

@@thenetworkingdoctors no complaints. I’m retired Army myself.

[@miravida9778]

on a subnet 20, if that break into 2 separate vlan is the router still using the same config?

[@jrmoiney]

Good video

[@tungnguyenvan2850]

Can you help me with a cisco dduopc? I finished it but it has half a new

[@tedgabara]

ctrl+shft+6 - thank you so much

[@vipulzala7293]

another way is ...no ip domain lookup

[@thenetworkingdoctors]

Can you elaborate on this?

[@christianjavier1776]

Saved me so much time! Will basically del the device

[@KrugiOficial]

Hi Sir, does it work for multiple vlans? I really need the answer...

[@MrDuminica]

Thanks!!!

[@emmanuelmarosi3736]

Can IP helper address be configured on a switch?

[@RicardoSanchezJr]

i have a test lab I am having issues with DHCP relay. Not using a router but using a multilayer switch to server for routing. unable to figure out,

[@KingCruzer]

I hope you're still active..... can you make a vid about 1 dhcp server connected to a switch and the switch has 2 routers connecting to it? please, im dying to know to learn about this one (if this is possible), because I tried doing it but only one router gets the IP from the DCHP server, the other one was assigned by the APIPA. Thank you in advance!!!

[@muhammadarif4227]

sir you are great

[@thenetworkingdoctors]

Thank you Muhammad!

[@hans-goranpalmqvist6008]

How is the switches ports configured?

[@ianfischer103]

Great vid. Change your smoke detector batteries regularly. I can hear them beeping and it’s distracting.

[@thenetworkingdoctors]

Yeah, but it's so I high I wasn't able to reach it with a regular latter 😉

[@ianfischer103]

Hehe have you tried a pincher pole?

[@SuperGiggun]

what if you have multiple vlans?

[@AzharKhan-sn9vf]

In this scenario how to provide ip address to vlan 10 automatically??????

[@Ramms23]

I love how you yell so much. You need to know IP addresses LOL. Great video btw

[@mathasnielsen1538]

If you have multiple vlans, you will go into your router, then into your vlan interface (Could be vlan 10) int g0/0.10 and write ip helper-address (then the ip of your dhcp)

[@kaddadennoun5150]

I only have 1 router in my lab so I thought I could ude ip helper-address directly to link to my dhcp since Ih had no rip but it's not working at all...

[@mohamedmalik9654]

How I can download the lab?

[@vikingthedude]

tricep pushdown tutorial?

[@marlonbarnes9083]

MY QUESTION IS THIS : DID U PUT AN IP ADD TO THE SERVER BEC I AM HAVING ISSESWITH THE APIPA

[@thenetworkingdoctors]

You need to make sure that when you create the IP Helper address, that it is pointing to the DHCP server and that you configure the IP Helper address on the interface that is facing your LAN.

[@xbunterhundxprivatx]

Did it point for point like you , but it don´t work.

[@KavanMavati]

I wonder how many keyboards a mouse he breaks with these big greps. by the way Great videos (:

[@m.fajardwisubianto2443]

Why cli not Gui

[@jasontokoph]

I hope you changed your smoke detector battery after finishing this video.

[@marlonbarnes9083]

no r not explaining urself . we still need an ip to the server

[@thenetworkingdoctors]

I don't understand the question? ....please elaborate

[@dimphojelly8744]

NO DEFAULT GATEWAY SUPPLY

[@tahersadeghi6773]

Why you keep screeming whe you are lecturing?!

[@thenetworkingdoctors]

I speak loud and clear, to make sure I get your attention. Lower the volume.

[@lena5242]

О господи!

[@grahambrown5874]

Your audience is not deaf, so do not shout. It’s very annoying when trying to lean the subject.

[@thenetworkingdoctors]

My audience knows me and the way I teach. They are used to it. The most important thing is weather I give out the correct information. The audience can always lower the volume.

[@LulzChicken]

Good video