Did we just WARP the hood? Mig welding HEAT DISTORTION and sheet metal warping

[@dukeallen432]

Authentic. Chads authentic. Doesn’t hide his welds. No smoke and mirrors. No unrealistic expectations. Welding with a mig at its core. Filling hole burn thru’s. Real life. Thanks. And EXCELLENT camera work.

[@kevinumhey5939]

Nicely done , and a good teaching !!!! PS standing the hood up makes perfect sense .

[@jeffbeam4259]

Never cease to amaze me how chad sees the beauty in what most people think is junk. Love the videos every day, makes me wanna learn to weld

[@hitnmiss49]

This is going to be a valuable lesson. Thank you Chad and Jolene for these videos.

[@bernardgodfrey5276]

Reminds me of the hot rods when I was a kid. Great job!! Love your work. It inspires the average gear head.

[@donmelvin7102]

Good tip setting the hood straight up so it keeps its shape. Thanks

[@ianbostock9373]

One step at a time - it keeps coming together & valuable lessons with each step

[@gfam2023]

Hi Chad , I am a car guy from Australia, i love your show and watch it every chance i get. Im not trying to tell you how to do your job but you should realy wear a mask when ever possible when removing paint and rust. my old mate got lung cancer and died from not wearing a mask, even a paper mask is better than nothing. I just dont want anyone going through what he did. thanks, Steve from Australia.

[@ejharrop1416]

Crystal clear where the hot rod build is going every day. Always forward!!! Awesome as always. Thank you, take care and peace out.

[@keithlowry6505]

!!Bad Chad is always thinking ahead!!Thanks Jolene for awesome camera work.

[@jimcoplan9502]

Another great lesson by Chad. Jolene continues to produce amazing videos!

[@dexterfranklin2121]

Keep up the good work cars looking great

[@larrycrandell7493]

you are amazing to watch , the lessons you show are invaluable to someone just starting out Thanks and Jolene does a great job with the video

[@willydoitbettydont9100]

Excellent technique for this type of welding. What is nice is he is not just telling he is showing the work and explaining. Best vids for learning. Thanks

[@hectorcalderon3011]

I love how you and your honey love each other. I have learned so much from you thanks for talking the time to show us trying to improve our skills

[@darylmorgan9887]

Great content for learning Chad and Jolene. So much time explaining step by step. THANK YOU BOTH

[@trybriguy1357]

Great job as always Chad. Living life through your videos. Can hardly walk anymore so, your the man I watch and I miss doing this kind of work.

[@charlielemmons5525]

Another fine lesson on welding a hood that just has a few spot weld holding it together. Chad and Jolene always do a great job everyday.

[@roadstercm6]

I love watching you both sculpting with cars. I too am a welder at Wilson Auto Repair in Texas. May I suggest you try some cooking spray inside your welding nozzle to keep spatter from sticking and it makes it easier to clean. I find a clean nozzle makes better welds and less grinding. Again you are doing a great job with your videos of all your projects. Your metal work is amazing. Keep up the great job. We Texans like to tease people aboat there accents. Say a boat one more time, as Jimmy Boofay says if we couldn’t laugh we would all go insane. Pease out.

[@jimberry1227]

Never gets old watching you show us the way

[@johnnyoolivas7078]

Chad I disabled do to a stroke so I am unable to do what you do but I enjoy watching you build this car as I'm a Hotwheels collector , you and your teem do amazing work , I look forward to watching your process on how you build this Hotwheels Neet Streeter

[@trickysubject8563]

As Chad would probably tell you, it’s not a romance like Vin Diesel wrapping up a build in 11 minutes, it’s a matter of hard work, repetition and patience. You put the hours in and take your time and you will reap the rewards, and you’ll have earned it. It’s not a romance.........but it is a love affair! Thanks both of you for the content. 🇬🇧🙏😎

[@robertcloosterman9336]

Not a quick process but a necessary one. GREAT work. 👍👍👍

[@curtisbolinger3366]

Hey bad Chad! Really enjoy your videos, I am not a body guy but I really enjoy all cars and those sorts of things. I worked in a factory years ago building food processing equipment so I’ve done a lot of welding and work with metal, sheet metal and so on. Enjoy all your work!

[@chrissweet6298]

The best new old school skills in my generation just glad to be here to experience it as you make your masterpieces

[@deniseprettner2020]

This car, out of all the ones I have seen Chad build along with Jolenes car, are the coolest ones. Love to see them both running this summer.

[@jamesray3292]

Great job Chad, this is gonna be a sweet ride!

[@frankkirby5763]

This is really special welding. You have skill. Thank you Chad and Jolene we love your creations.

[@paulmatott8331]

It's amazing that you can put that much weld on the hood and not have it warp ! The coupe is really taking shape and it looks awesome . Keep up the great content .

[@jkuenzi1]

I love watching artists create!

[@fredhoman6101]

thanks for sharing ,great camerawork Jolene

[@howquick]

Thanks for another great lesson Chad and Jolene 👍

[@markbrady29]

The Camera work on this video is brilliant.

[@jazzking99]

the car is looking good, nice and solid. needs some cubes under the hood, hopefully a lot! go chad and jolene!

[@jparish2469]

Bad Chad nails another .you weld like its a zip and it zips up like a YKK .great as always thanks to you both

[@ayrshiretrikes3810]

Another start to a great week. School is now in session

[@tonymosca6591]

With the front clip on, this car is badass!

[@skimdoodle1006]

I am leaning a lot u. Thank u. I am working on a 1963 Chevy convertible. I am replacing the floors. I learned a lot when u did the wheel wells. I am welding it slowly.

[@jamesmccormick9564]

Really enjoying this build Chad and Jolene

[@davidelack8809]

my 51 Nash hood is 6 ft long ,I am super glad I was able to learn from you two about the method to keep it from warping when I weld Its seam.Looking forward to the results. You two Rock!!

[@jonwaigandt-palm1490]

very educational. I enjoy watch you work.

[@discomonkey3492]

Calm clear instructions - perfect

[@benton6160]

Folks are really enjoying this build.

[@billbass2771]

Chad and Jolene are both good at there craft that car is looking good

[@cannabisticannabisticino2718]

Today diversified video. I saw him weld, then weld again and then again for an hour straight. Great soldering job guys. 😉👍 I guess it consumes a lot of wire and gas... Greetings from Switzerland

[@marcussmith5558]

Love the show been watching for over 12 months keep it going lol

[@DT99race]

I've seen you do this method so many times now I feel like I could do it whenever it's needed. Thanks so much for teaching us your methods! 👍

[@ate-updesigns9186]

Can't stop looking at this car..definitely a cool visual...seen chad use this method over and over...through many episodes and I'll definitely use it on the next project I do...thanks Chad and Jolene..another valuable learning episode..cya tomorrow

[@darwinfoster7420]

Looking good ,great job of controlling heat . I dislike doing long runs like that but you nailed it

[@davidtutor6763]

Love watching and learning. Thanks for the hard work you two

[@Regg363]

Most informative video on you tube, as are all you two’s videos are.

[@billhoward7730]

This is a very good lesson on welding a two piece hood. Wish I saw this video many years ago when I welded up my 52 Plymouth hood very bad warping. Lesson better late than never. Bill

[@Terrylthorson]

Another great lesson. Thanks Chad.

[@weathereddog7650]

I am a Fan of your content and have been since the Discovery days. Commented 460 days straight. Right there with you and Jolene "Fina". I believe if you built a movie car, Hollywood would produce a movie around it. "Super. Star"!!!

[@rodneynikora358]

Thanks dude, learn a lot from you, you make sense in many ways, inspiring

[@austincrowley1228]

great work showing the best way to we;d a hood without warping

[@jamesray3292]

Y'all are doing a wonderful job Chad & Jolene! love the way the car sits! And that you are gonna put running boards back on it!

[@garybarry4446]

Very important content today thk you Chad , excellent camera work Jolene .

[@peterfernandes8611]

Chad that's a lot of welding, but it looks like you can control the heat really good. Jolene you doing awesome job of catching his work. 👌👍

[@dukeallen432]

Perfect amount of welding.

[@timmaccowan]

Sweet another great video keep them coming. Nice to see how this thing is coming together.

[@clydette56]

She's looking good and can't wait to see it come further along. Hi Fina!!!

[@mark110101]

Another excellent video, with great tips for noobs like me on welding

[@curtisalbert1846]

Can my phone acted up yesterday and now I'm watching your video today it's Tuesday very good job

[@thegrahamplace]

Always enjoy your videos! Best of luck to both you and Jolene!

[@vwcoco]

Fun,fun and fun !! Enjoying this build chad thanks

[@terrymccall1899]

Hi Chad & Jolene, thanks for the video.

[@johnkranz4004]

Very nice job Chad and Jolene

[@kwikslvr73]

Really coming along that’s one bad ass ride!

[@herblorenz90]

Living the dream with Chad and Jolene.

[@stacyg3802]

That's the way to do it! Good job Chad.

[@larrybailey43]

Thanks Chad & Jolene !

[@craigalyea1607]

Great class session today 🤘

[@Johnsonjunction13]

Glad to see you back

[@kevinbrown1549]

Great job once again! I sure learn a lot from these videos!

[@butchdemoors1828]

Good to watch your videos, easy to follow!

[@johnmacmillan2766]

Chad, love having the air when I’m Putting something together one of the many things I’ve learned from you! Use to be a wet rag guy the air is so fast no mess and always a great job. Thanks!

[@bobbarnes5082]

Nice work, love this series

[@baldanddangerous1572]

another excellent tutorial coming up ,thanks chad and jolene

[@dustinchaffins]

Just somthing about a classic vehicle and it's curves!! 🔥

[@bossownermanager8536]

Good Morning Chad & Jolene i like watching your program you tell us all how it's going to happen and that's a lot of knowledge to all of us keep up the great work both of you

[@jasonbarton4035]

Great job!! Good lesson!!

[@donaldstacy8378]

Can’t wait to this ride done.

[@shotgun283]

Awesome job on the hood.

[@vwcoco]

I’ve made some good friends on the Dailey chat thanks to you Chad and Jolene thank you . Hi to Fina 👍

[@jazzking99]

good job chad, hood looks nice and straight. keep up the good work. hi jolene.

[@papadanielp]

Excellent tenacity!

[@jaymies4064]

Another great video Chad and Jolene

[@kevinmcpherson6999]

Chad and Jolene. Lovely video and your car is really moving along. Hope your weather is nice and your all in good health. Stay cool and enjoy your day. 👍🌟✌️

[@ronhonig]

Thanks for sharing. Love your work.

[@stevemiller1212]

Nice camera work Jolene 👌

[@thomaswatkins7855]

Jolene is a great welder

[@clyderivercustoms]

Love the show guys 🙃

[@larrybailey43]

Good work coverage, Jolene ! Ur cool !

[@dwolff9598]

Good demo, thanks

[@kevinmcleod3741]

Welding Welding over the car he goes , cool air and no warping plan for today . Thumbs-up Jolene 👍 and 👍 Chad great welder up content today !

[@RebeccaMorgan-k7x]

Brilliant job

[@richardjennex6583]

Good evening jolene and chad hope all is well and you had a wonderful weekend also thank you for sharing

[@jamessutton5199]

Nice project 👍

[@vwcoco]

Great work chad !!

[@davidsimpkin1213]

Another good lesson !!!!

[@allanblackwell8655]

Working fast but stayin patient, great