Did you change your timing belt on time? 2.0 HDI 163 (DW10CTED4, RHH) teardown part 2

  Рет қаралды 11,447

rust&oil

rust&oil

Күн бұрын

Good day, viewers.
This time I continue dissasembling the broken DW10CTED4 (RHH) engine from Citroen C5 2010.
Some interesting moments appeared, for example, a dying timing belt...
0:00 - Injectors
6:50 - Fuel pump
10:30 - Vacuum pump
11:56 - Exhaust manifold
13:22 - Vacuum selenoids
14:20 - Thermostat
16:03 - Intake manifold
21:10 - Timing belt
24:40 - Valve cover

Пікірлер: 24
@vitinhaxsaravtr
@vitinhaxsaravtr 2 жыл бұрын
Great video. I change my timebelt after 10 years 140.000km.
@jayartz8562
@jayartz8562 2 жыл бұрын
Great info for the C5 owner, thanks.
@fiksefant
@fiksefant Жыл бұрын
Thank you for informative video. The timing belt wheel at bottom is supposed to have slack, it's for timing adjustment.
@foxypahod
@foxypahod Жыл бұрын
Thank for great informative video!
@ulcho
@ulcho Жыл бұрын
Looks to me that this engine was not serviced properly.
@karlbigmore7949
@karlbigmore7949 Жыл бұрын
Thanks for doing this strip down nice to see everything is removed shcking the amount of carbon
@19jacobob93
@19jacobob93 2 ай бұрын
I don't think that carbon is too bad! Doesn't look obstructive and I've seen way worse on DI petrol engines without an EGR!
@patrickp.5976
@patrickp.5976 Ай бұрын
Thanks for the video. The chain is not really in perfect shape. Seems like oil was not changed regularly. Sit would still work for many kilometres as it is quite resistant. My chain did make slight noise but as per Peugeot AGIR nothing to do in this case as long as the noise is not too violent.
@OcelotTheGreat
@OcelotTheGreat Жыл бұрын
this series of videos is useful for me as I have the same engine. Thanks!
@behappygood9036
@behappygood9036 10 ай бұрын
Merci mon ami
@martgryfny
@martgryfny Ай бұрын
I must say: what a horrific intake manifold construction! Why the heck is it so unnecessarily huge? Couldn't they split it up so you don't have to remove high pressure fuel lines and timing belt cover? If you want to clean up your intake from carbon, you end up with camshafts uncovered! Now try to clean up the part of the intake in the header, not to letting the dirt to get into the engine... What a disastrous engineering... I have this engine in Jumper (I think in UK it's Relay), and what's worse, the main part of the intake manifold is inside the engine compartment, because the hood is very short and you can only see the oil cap.
@toufiktlemcani1947
@toufiktlemcani1947 Ай бұрын
Bonjour je voudrais savoir est-ce que vous avez rectifiée le cache d´abracam merci pour votre réponse
@marke293
@marke293 Жыл бұрын
Hi there could you do me a favor if possible an that is could you measure the impedance on the injector power connections ? Sorry for all the questions but as you have probably realised I have this same engine but I have a few problems with it that I am trying to fix Thanks
@impaelas
@impaelas 5 ай бұрын
Could you do an EGR inspection and cleaning on it for us? Thanks for the video!
@rustoil
@rustoil 5 ай бұрын
I will try to find time to do it.
@impaelas
@impaelas 5 ай бұрын
@rustoil thank you mate. Running this engine in a 508 hybrid. I've noticed oil buildup in the intercooler when i had to change it cause of a leak. But the turbo is so difficult to check with it being placed at the back of the engine... keep up the good work!
@user-zr8of3pf5c
@user-zr8of3pf5c 2 жыл бұрын
how many miles does the engine have?
@rustoil
@rustoil 2 жыл бұрын
It had about 240 000km on the clock...
@gregplayer372
@gregplayer372 Жыл бұрын
Could you have a deeper look at the Fuel pump? My C5 is giving me fuel pressure fault codes I don’t know if it’s the sensor or the pump itself. I’ve picked up a pump rebuild kit with all the correct seals etc. alternatively do you still have the pump and can you post to the UK😅
@fiksefant
@fiksefant Жыл бұрын
It's not uncommon the sensor breaks or get erratic measures. Read numbers on sensor, you find identical on ebay for fine price. Pump itself will normally hold many years unless abused with bad fuel or neglected service of filters.
@pyromaniac354
@pyromaniac354 7 ай бұрын
@@fiksefant yes.parts are interchangable with a few car makes that use the same engine.
@pyromaniac354
@pyromaniac354 7 ай бұрын
Thats a lot of carbon buildup My 508 with identical motor has just done 274,000 kms lol
@patrickp.5976
@patrickp.5976 Ай бұрын
Thé présent one was probably often used for short distances. I had the 150hp DW10 ted4 and I sold it in perfect shape @ 270.000km. but the motor mostly did trips of 90km and rarely few km only.
@pyromaniac354
@pyromaniac354 Ай бұрын
@@patrickp.5976 yes. The previous owner I bought it from did 700 odd kms per week driving on motorway. I do quite a few too
The most reliable French motor? We disassemble the 2.0 HDI (DW10TD / RHY). Subtitles!
9:41
🍕Пиццерия FNAF в реальной жизни #shorts
00:41
ТАМАЕВ vs ВЕНГАЛБИ. ФИНАЛЬНАЯ ГОНКА! BMW M5 против CLS
47:36
Balloon Stepping Challenge: Barry Policeman Vs  Herobrine and His Friends
00:28
Napinacz łańcuszka rozrządu Mondeo mk5,  S-Max mk2  Kuga mk2 Silnik DW10F
9:39
Montaż zaworu EGR Citroen C5 / S-MAX 2.0HDI
18:53
BM83
Рет қаралды 54 М.
reparar correa  de distribución motor Citroen Peugeot 2.0 hdi mirar corregido
17:16
hugo alvarez mecanicahugos
Рет қаралды 317 М.
Chinese burger Stir-fried vegetables with peppers
1:00
Tongguan Roujiamo
Рет қаралды 36 МЛН
They left the children in the car and went swimming themselves🌊😔
0:50
ГИБКОСТЬ 80 LVL
0:18
В ТРЕНДЕ
Рет қаралды 8 МЛН
Жим лёжа на льду🔥 #freekino
0:33
FreeKino
Рет қаралды 4 МЛН
ЛАЙФХАК ДЛЯ РОДИТЕЛЕЙ от Nika.Family
0:45
Привет, Я Ника!
Рет қаралды 7 МЛН