I agree with you about our "throw-away" society. I generally keep fixing until it is to far gone to repair. Then, if I can, I will buy used. The problem is often a matter of merely cleaning the "broken" machine. Great vid.
@tiredoldmechanic17913 жыл бұрын
Unless you can do your own repairs, it's often very costly to have a shop pick it up and service it. The cost of a carburetor kit is about the same as some new carburetors.
@DadzorRules3 жыл бұрын
@@tiredoldmechanic1791 You are absolutely right! Like many others, I grew up poor, so my family did a lot of things to get by, like carpentry, mechanics, farming and fishing. At the time, I thought it was a hardship, which at times it really was. Once I became an adult Iwas able to use many of the skills I learned back then. Now I see it as a blessing. By doing my own work, I have saved many thousands of dollars over the years. As well, I get a tremendous amount of satisfaction by "saving" things instead of throwing them away.
@pnwdad12613 жыл бұрын
Unfortunately a large percentage of the younger generations in today's society mechanical aptitude and common sense has become few and far between, so rather then learning from someone with experience or teaching themselves they have no choice but to waste money and resources on replacements. Thats also a large reason most everything we have to buy is cheap imported garbage rather then quality local goods. 🚮
@tiredoldmechanic17913 жыл бұрын
@@pnwdad1261 I've discussed this before but you can't really train somebody who wasn't born with some mechanical aptitude. There has been a shortage of mechanics for years.
@NSEasternShoreChemist3 жыл бұрын
I have a lawn mower from 1981 (Tecumseh, 3 HP, 19"). It's so old, in fact, it doesn't even have a dead man's switch (which I like -- easier on your hands). My older brother found it in the trash maybe six years ago, still in fully operational condition. Nearly 40 years after it was built, the machine still starts on the first pull even after sitting all winter, and is the most fuel-efficient mower I've ever had. Can't beat some of those old mow-chines!
@aceadman3 жыл бұрын
Most people don’t understand the power of saving money. Every dollar adds up. Recycle/reuse/retool/repair, remain afloat, retire younger, relax more. I love your ethos on that front. 😊👍👍
@chadmarkle32783 жыл бұрын
Totally agree, everyone wants to throw away for new. I really enjoy bringing things back to life and back to use.
@pettsonochfindusdvd47872 жыл бұрын
I only have a wheel horse Commando 8 1963 anda clipo 1975 and My new lawnmower is 1987from the city work its a 2stoke o and the all work
@frozenfirestix2 жыл бұрын
As long as it works, keep it until it breaks. Then fix again!
@frozenfirestix2 жыл бұрын
Surprising to see everyone use ethanol gas, not drain it and can’t start it in mowing season, then just buy new. Duhhh lol
@enginesandoutdoors32383 жыл бұрын
I’ve worked on a lot of mowers over the years. Those old Briggs single lungers will still be putting around when we’re gone.
@grahamstretch68632 жыл бұрын
Those things and cockroaches will still be here after a nuclear war! 🤣🤣
@ronmcwhirter36413 жыл бұрын
The definition of a good mechanic is a person that has the ability to repair something that is broken instead of replacing.
@alexdensmore52363 жыл бұрын
As soon as you said wheel horse that instantly unlocked a long forgotten childhood memory. When life was the best it’s ever been. Oh man does time fly.
@MarshallBF3 жыл бұрын
Thank you!!! for saying the throwaway society is a problem. I agree wholeheartedly.
@WKBHB3 жыл бұрын
What I've learned from others wealthier than me is they can afford to "use and dispose" because their time is too valuable to waste. I choose to not be wealthy and enjoy my time in a way that isn't as constricted to the demands of other people. Freedom's just another word for nothing left to lose. I prefer tools intended to last a lifetime over disposable
@edmullins45193 жыл бұрын
Strangest 1950’s Gas Powered Air Compressor I’ve ever seen?
@corydriver76343 жыл бұрын
Runs on gas and compresses air in the cylinders, right?
@edmullins45193 жыл бұрын
@@corydriver7634 I’m guessing you didn’t see the title “1950s Gas Powered Air Compressor, Will it start” hence all the reply’s referring to a funny looking air compressor. The title has been changed since video first went live.
@corydriver76343 жыл бұрын
@@edmullins4519 No, I saw the original title. That was my attempt at humor.
@edmullins45193 жыл бұрын
@@corydriver7634 10-4, and you were correct!
@memadmax693 жыл бұрын
All that classic sound brings back tons of memories lol
@Military-Museum-LP3 жыл бұрын
When we were little boys these little tractors made us feel we were the top dogs! My first was a Cub Cadet 70. Three Speeds and dad said keep it in first when mowing and when he wasn’t around it was second gear all the time!! Thanks Matt for helping me remember a better time.
@karencary33123 жыл бұрын
I'm sure there is some young man out there who would love to have this mower to use or even start his own mowing business.
@nferraro2223 жыл бұрын
'71 Cub hydostatic. Go flying down the hill in top gear, lock the brakes on wet grass and go sliding through the yard for forty feet. I can still hear my Dad raising hell:)
@danbasta36773 жыл бұрын
Being a International Harvester Cub Cadet tractor owner as well as a Wheel Horse and Power King tractor owner, you can mow with no problem in second gear, as long as your grass isn't to long, your blades have to be razor sharp, everything greased up properly, and strict maintenance, you'll be fine. Trouble is, in today's society, these outfits change hands to different outfits, and they start eliminating the good old equipment calling it obsolete, parts are hard to get and come by, and they start getting and using chineese garbage and junk that won't last for very long, and needs replaced because you simply cannot fix it yourself. Unfourtionaly, this is our society these days, the good old American know how and good old machines from the past that is built and made with endurance and strength are now a thing of the past, and as each year goes by, it gets worse and worse each year. Very sad, however, very, very unfortunate and true.
@henriknordeng3 жыл бұрын
I totally agree with you. Pepole throw away fully functional stuff and fixeble stuff. I love fixing up old machines and stuff. Got an old Snowthrower Snowbird from 1965 im fixing to next winter. I love that machine.
@dangerrangerlstc3 жыл бұрын
My uncle has an old 1950s wheel horse lawn tractor. Remember driving it around when I was young too.
@DieselCreek3 жыл бұрын
My neighbor just picked one up around that vintage neat old tractors
@dangerrangerlstc3 жыл бұрын
@@DieselCreek had someone in the local old threshers club who collected them. He passed a few years ago and his widow sold off the collection to pay bills.
@makingithappen51783 жыл бұрын
"Briggs and Scrap Iron" That was good.
@bmacd21123 жыл бұрын
Yep...I had a good laugh on that one as well.
@danbasta36773 жыл бұрын
I prefer Kohler engines myself. Briggs engines run good when they are on push mowers.
@jonathanstancil85443 жыл бұрын
@@danbasta3677 those are usually the little 5hp Raptor engines. A good design. Like Matt said, the I/C's aren't bad but a few years ago I bought a Kubota Zero Turn and could choose either Briggs or Kohler. I went Kohler and it's been a good and reliable engine.
@regularman63283 жыл бұрын
It was funny but I’ve never had much trouble with B&S engines. Honestly Kohler engine’s have gave me trouble. I guess it depends on the year, and who slapped it together at the factory 🤷🏻♂️🤷🏻♂️.
@AnthonyRBlacker2 жыл бұрын
It feels SO good to just repair broken things.. yes, it's simple to just buy a new part.. but it's so satisfying to just repair the old one!! Plus, a lot of original parts are just better than repops.. even if they're oem, the original just tends to be better.. (with exceptions, of course)
@Miknunley33 жыл бұрын
I swear, this guy gets all the cool toys. Still love the autocar the most
@frankdeegan89743 жыл бұрын
some kids get all the cool toys.
@NSEasternShoreChemist3 жыл бұрын
I agree. No need to throw away something that just needs a little TLC to get back into working order.
@danbasta36773 жыл бұрын
Yet, this is what people do because of a throw away society. Now that we get chineese junk in this country, it will definitely get even WORSE!
@jtraveny3 жыл бұрын
i love old wheel horse mowers, i used to have an old 67 1277 with hydrolift deck and hydrostat trans, i miss that old thing. had a 12 or something kohler, cast iron
@glenpaul36062 жыл бұрын
Like your attitude. Besides it's more satisfying to clean up or fix something that run out and buyer stuff.
@EnderMalcolm Жыл бұрын
This should be a great video to watch before I start messing with my old Wheel Horse. It's been sitting for nearly a decade as well, but the engine spins freely with compression, so looking good. The electrical is.., well, that's gonna be fun.
@josephdougherty23993 жыл бұрын
Often viewer first time commenter .. Word of advice on mower drive belts. Find a local supplier of industrial drive belts for machinery. Take your good condition belts in before they are wore and have them matched up with industrial belts .... usually 1/3 the price and last 5x longer as well as handle rough treatment better
@kennethshaw83883 жыл бұрын
These old Toro Wheel Horse tractors are tough. We rescued the same 210-5 model left as junk on the roadside with a "FREE" sign on it. With some TLC and $350 for wheels, tires, seat, spindle bearings, blades, oil and a new carb it will probably run another 30 years. Wasn't ready for the dump. What's ironic is the previous owner is a mechanic, and he replaced this with a new Craftsman. It cut an acre of lawn all summer without a problem - runs great.
@corydriver76343 жыл бұрын
I totally agree with you on the “throw away society” point of view, I wish more people thought that way. Years ago when we moved in to our home, my wife and I hauled several pickup loads of trash to the dump after cleaning up our acreage. The landfill was a 100’ deep crater covering about 80 acres. About six years later I had to haul another load to the same dump-it was a 100’ tall mountain covering the same 80 acres. The sad thing is much of the stuff in there probably could’ve been recycled or reused somehow. Good work keeping that old mower working.
@bonemar663 жыл бұрын
There are competing schools of thought on what it means to be environmentally friendly. Do you get the new mower because it uses less gas (or no gas) and toss the old one, or do you fix the old one, save the landfill and keep the gas guzzler? The environment is probably farther ahead with the fixed-up old one.
@NSEasternShoreChemist3 жыл бұрын
@@bonemar66 New lawn mowers aren't necessarily more fuel efficient. Manufacturers seem to keep putting larger and larger engines in their machines. While fuel economy/HP might increase, the higher HP means you're no farther ahead. Making a new lawn tractor (10 kg aluminum for the block, 40 kg steel for the frame, 1.5 kg rubber for the tires, 5 kg plastic for random plastic parts) would emit at least 167.5 kg of CO2... the equivalent of burning about 72.8 L of gasoline. TL;DR: if your new mower is 10-15% more fuel efficient than the old, you'll have to do A LOT of mowing before the environment is farther ahead with the new one than the fixed one.
@corydriver76343 жыл бұрын
@@NSEasternShoreChemist not to mention new mowers don’t seem to last as long (at least in my experience).
@NSEasternShoreChemist3 жыл бұрын
@@corydriver7634 Yeah, I think it's because the decks are made out of cheap Chinese steel that lacks quality control/corrodes easily
@danbasta36773 жыл бұрын
@@NSEasternShoreChemist Biggest problem these days, everything is from china. We, don't need them, look at what they and the north koreans started, this carona virus stuff. Both countries should be held responsible and face the Hauge for chemical and biological weapons killings throughout the world.
@THEundeadTEENS3 жыл бұрын
Ive been collecting wheel horses since i was a freshman in high school, not any newer stuff like this all mine are from the 70’s with cast iron kholers, most reliable tractors ive ever owned.
@frankscarservice19113 жыл бұрын
Hi, please keep on fixing things instead of replacing everything by new parts. I really like it if things are working which I fixed myself. Cool videos. Keep on.
@ronmurphy98192 жыл бұрын
You and I got the same mentality. Fix it if possible, if not leave it and come back later and try again. Good for you. Thanks Ron
@Parmesana3 жыл бұрын
aw geeze..memories flooding back. My late brother (2 years gone) used to repair lawn mowers and Mom's double garage turned into a workshop. He had an old Toro just like that one. He wasn't a very good communicator so I never knew the intricacies of the carburetor.. I just knew that it was usually the culprit when mowers were goofed up.
@lesabre19722 жыл бұрын
I'm with you I love fixing stuff it gives you a sense of accomplishment.
@j818512 жыл бұрын
Berryman 5 gallon vat with parts basket. Cleaned dozens of everything from lawn mower carbs to 2 bbl 4 bbl and 1 bbl. The stuff stinks like yuck but it works. A carb that looks like dirt will come out of Berryman clean as new just rinse under a warm water source after it comes out of the cleaner and prior to reassembly and away you go! Also just like brakes as we discussed before always, always get a rebuild kit for your carb so you get a new jet and seals. Remember the goop that comes out is a foul mess that corrupts rubber as it sits stewing for years!
@kennolte58013 жыл бұрын
The relationship between a man and his first tractor mower. It's almost a sacred thing. I remember well my first one that I got to mow with. Good on you for getting it and doing a little maintenance on it. You're doing it the right way. Thanks for sharing the memories with us.
@byroneidem59443 жыл бұрын
i agree with you I bought my Durango over 20 years ago now and I am still driving it everyday I did buy it new and took care of it.
@mp36253 жыл бұрын
Love repairing oldies
@jurgenkuhlmann91943 жыл бұрын
No jokes about Briggs & Stratton, please! I just changed the oil, cleaned the spark plug and air filter on my 1980 vintage lawn mower - and it's still running! It's like the big, US made engines like Detroit Diesel, Cummins or Paccar: they're not that crappy as some people may think they are!
@keithstudly60712 жыл бұрын
Get A Horse! A Wheel Horse Of Course! They used to provide these for the crews to push or tow the race cars with at Indianapolis, and the winner got one as part of his winnings. They went down hill after Toro got involved.
@JoeShopper3 жыл бұрын
It's "Worse THAN expected."
@joeldunsmore51593 жыл бұрын
Ive also heard them called Briggs & Struggle!!!!😀😀😀😀😀👍👍👍👍👍👍
@craigsmith82173 жыл бұрын
I, too, prefer to fix stuff. Other than growing up without the means to waste stuff, I care about where the leftovers go.
@johnhicks95293 жыл бұрын
Matt did you know? That you can buy refills containers of lead acid. at auto parts stores. For topping off old batteries such as12 volt lawn& garden& vehicles& atv's& etc.
@born2soon3 жыл бұрын
A friend gave me a 1965 Wheel Horse 1055 back in '06. It hadn't run since they parked it in the shed 10 years prior. It would turn over, but would not start. (Kohler 321 10 HP). Complete frame up restoration with the help of friends and I drive it around our tractor show and I've even been through McDonald's drive up on the far side of town. (3 miles)
@DieselCreek3 жыл бұрын
Glad to hear ya got it fixed up but I have to point out that the K321 is a 14hp engine, the K241 is the 10hp
@born2soon3 жыл бұрын
@@DieselCreek The body is strong, but the mind is weak...I looked at my Owner's Manual and I stand corrected, a K241 it is...
@joerodrigues38162 жыл бұрын
You are so right about that even though you are only in your 27 or so it’s nice to know you care mate.
@ernestg.hilliker41792 жыл бұрын
THOSE are the type of carb's I like to see with the high speed adjustment on the bottom where they should be!
@Muffin_Masher3 жыл бұрын
old petrol does smell wonderful I agree with you
@StofStuiver3 жыл бұрын
Love you m8, for saying you hate the throw away society. Thats been bugging me since it started, in the 60ies/70ies here. I try to fix everything and if i cant, i re use everything for something else. I can hardly throw away a piece of plastic wrapping, or a cup, bc i always see how it could be usefull some way. Suppose id be in the desert and youd need something to hold water. That worthless plastic cup could save your life. Im not a hoarder, but not all that far from it. I force myself to throw away things at times, if it becomes too much. But i see value in everything. Its how people were when i was young. You re used everything, untill there was nothing left.
@StofStuiver3 жыл бұрын
Reminds me of "the straight story" aswell. Love that movie. If you dont know it, go see it ;]
@ianallen23 жыл бұрын
"1950's Gas Powered Air Compressor sitting 30 years! " Sat so long it morphed into a lawn tractor. :)
@WhiskeyGulf713 жыл бұрын
😂 The late shift won't understand, the title has now been changed to reflect the video
@danbartolini273 жыл бұрын
I saw that but then couldn't find it and this morning my alert went off for a new video and it's this one I watched last night
@ianallen23 жыл бұрын
@@danbartolini27 He has changed the title of this one to the correct one. It was titled the gas powered air compressor that he got running about 2 weeks ago. Still a very enjoyable video. :)
@johnwalther10493 жыл бұрын
@@ianallen2 ui
@johnwalther10493 жыл бұрын
@@danbartolini27 I. Im
@joeheilm3 жыл бұрын
Why am i the only guy that destroys bowl gaskets every time i tear a carb apart 😭😭🤣? Glad to see the old girl back in action. Great stuff! Cheers
@elbertajohnson9373 жыл бұрын
Love your videos. Remind me of my late husband. I too belief in our society is too wasteful and don’t value what we have. Keep videos coming.
@richardploeser426711 ай бұрын
It is called: LAZY, I Got the Money, I do not Care, Let someone else do it, etc! Keep doing what you are doing! LOVE IT!
@eholbrook193 жыл бұрын
1300 hours that thing is like a virgin still. I have a 2016 d170 mower with 8200 hours on it. It still works.
@Shield.1483 жыл бұрын
You could attach a small plow on it too, for the parking area at the Church.
@elmermason96853 жыл бұрын
Pretty easy fix. Thanks for bringing it back to life ,
@dstorage21983 жыл бұрын
Them Wheelhorses like that are awsome easy fixers... I just went and got one -they put the tire air valves on inside to save m from getting smashed -I heard they designed the front grills after the chess piece - love the channel
@andrewbowers3676 Жыл бұрын
in 2020 I bought a 1991 Subaru Loyale from my friend's grandfather for $100, it blew a timing belt in 2000 and got parked in the barn. The battery in it was dated 1998, I threw it on my Noco Genius charger and it took a full charge, cranked the car in gear into my garage to reseal the engine, and lasted almost two years after that... I was amazed lol
@conawayjb3 жыл бұрын
valve stems on the inside is so you can have wheel weights on the outside and still air up tires, it sucks but it serves it's purpose
@daver18qc3 жыл бұрын
I've never in my entire life seen or heard of wheel weights for lawn mowers. Learn something everyday they say.
@jontrudell75293 жыл бұрын
@@daver18qc use them for Ploughing Snow in the winter. Wheel weights & chains on rear tires
@Bill-xc8le3 жыл бұрын
its actually so you dont bust the stems off while mowing around trees and other objects.
@jontrudell75293 жыл бұрын
@Randy Rinker 👎
@martiekr3 жыл бұрын
Whenn Matt says "Click" i instantly got vibes of "Watch Wes Work" saying the same thing, like: "torc to factory spec: click".
@jonathansimmons1782 жыл бұрын
That is a nice mower Matt
@jonathansimmons178 Жыл бұрын
0:05
@drummer08642 жыл бұрын
What you're calling a venturi tube, is called an emulsifier tube. It mixes air with the fuel to help atomize it to a gas.
@danbartolini273 жыл бұрын
I picked up a John deere tractor last year with really high hours on it for free. The guy said it would siez up when he tried to start it. I thought????, maybe it needs a new battery. No no he tell me he hooks it up to a battery tender every time he puts it away. Long story short it DID need a new battery and that's all, the high hours where due to leaving the key on while it was on the battery tender. It was easy to figure out the true hours, how much time it takes to mow his lawn x 28 or 30 weeks a year times how old it is. Hour meter said 700 it actually around 250
@PlanetMojo3 жыл бұрын
I am working on the Marvel Schebler carburetor for my Ferguson TO-20 right now. Took 30 days to receive an 'express mail' part that's been holding things up! I'm also rebuilding an old garden tractor (Farm King) with a class I three point hitch to use in my vineyard. It sat in a field for three years after the building it was in blew away. It is a very expensive free tractor that had a complete mouse city in the motor cowling. I agree 100% with the fix it attitude. When bad times hit, you don't want to be over your head in debt!
@jesusestrada55433 жыл бұрын
Out of all the things I've seen on this channel, the carburetor repair/ cleaning is the best part in my opinion.
@josephoneill31973 жыл бұрын
In addition to saving money by cleaning original parts, the time that you save from having to drive to a store, hunting down the correct part is often more important than the dollars spent. Keep up the great shows!
@leonardcrum68963 жыл бұрын
Tighten your Governor spring just a bit, it’ll get rid of the engine hunt. I’m a junker just like you, only older, be 77 in Nov. Really like your channel! Cheers from north Fl.
@donaldfranklin53913 жыл бұрын
Awesome rebuild on the riding mower
@peterbienvenu90332 ай бұрын
MATT you are the best
@JacobBishop-v7l Жыл бұрын
Can't beat an old wheel horse 👍
@jeffdraper55233 жыл бұрын
Like your mentality, I too was taught "waste not want not" and yes when you get something working again it is a great feeling :)
@marcryvon3 жыл бұрын
Look at what Mustie ! works on everytime. Curbside "garbage" mowers, snowthrowers and all he fix for next to nothing. Yes, a wasteful society. Can't stand that.
@michaelmayfield43043 жыл бұрын
People always sell cheap or throw away great things. I bought (for $100) a 18hp, 2 cylinder , 42 in cut Craftsman (really a Husqvarna) that had a frozen up engine. While the seller wasn't looking I spun it by hand just like in this video. I knew it wasn't locked up. Turned out to be just a stuck starter solenoid. Great mower.
@BCDanno633 жыл бұрын
Hey Matt !! For Cleaning Brass Copper and Stainless steel a scouring powder called Barkeepers Friend is amazing... it lifts away all the gunk and makes the metal shine like it was buffed...You’ll find it where the kitchen stuff like Ajax is ....a wet sponge and a water rinse.. bam brand new..
@stuartofJax3 жыл бұрын
Might I suggest the gallon can of carb cleaner. It comes with a tray for the small parts. Makes cleaning so easy when you can just dunk even large parts in the cleaning fluid.
@methere273 жыл бұрын
I appreciate your disdain for the throw away society, the difficulty with that is your only valuable asset aside from a special skill set, is time. My advice would be to use it wisely.
@patamos70193 жыл бұрын
Free fixes are the best fixes. I agree with you. Why buy when you can fix. I get satisfaction out of fixing something and not needing to buy parts. A little elbow grease goes a long way.
@sambontrager63922 жыл бұрын
Not bad for a Briggs an scrap iron an sitting for 10yrs.. I love them older Briggs an scrap iron
@michaelparker98863 жыл бұрын
I've got 3.5 old wheel horses oldest is 68 newest is 84 great old tractors
@DanTheAngryModder3 жыл бұрын
I had one like that, just short of 4k hours, sat for 10 years, and it ran just fine after 2 days of tinkering. 246-H
@lesabre19722 жыл бұрын
The PTO clutch is adjusted with the three holes next to the bolts you tighten those bolts so that a .010 shim fits between the plates in the clutch access by those holes next to the bolts
@joegee28153 жыл бұрын
I usually keep a can of carb cleaner with a dipping basket that you can soak all the little parts in. The can is a one gallon paint can and they come with a plastic basket.
@davidfarrish90003 жыл бұрын
You need a ultrasonic cleaner or a carb cleaner bucket to soak things. That would work much better
@General-Eclectic3 жыл бұрын
Agreed. They're so cheap on ebay that there is no reason not to have one.
@kurtmccarthy67333 жыл бұрын
Hey Matt, I hope you read the comments ? Cause I gotta tip fur ya ! Match the old belt up with the same length and size one at the auto parts center instead of a mower dealership/repair. A lot cheaper bud !
@Artiken13 жыл бұрын
I use a dremel wire brush to clean the small (carb) parts. Steel on metal, brass on aluminum, plastic on brass.
@keithallen31192 жыл бұрын
I have the same lawn tractor, bought new in 1990. Sat for a number of years and with a carb clean and belts it fired up and still runs well in 2022. Using it at moms 1/2 acre lawn. Looks about 95% new, I kept it clean and occasionally waxed. Original other than belts.
@IanSlothieRolfe3 жыл бұрын
Nice to see someone on youtube using carb cleaner for cleaning carburettors! It mostly seems to be used as starting gas on old engines....
@brianbarron50553 жыл бұрын
lawn tractors never die
@notajp3 жыл бұрын
Need to get a cheap Horror Fright handheld sand blaster and a big bag of baking soda. Will clean up copper, brass, and aluminum carb parts without damaging anything. That’s what I’ve used for years to clean up nasty corrosion and crud from old carbs, and my ultrasonic cleaner takes care of the insides.... Also, I use my mity vac to test float valves for seating.
@makingithappen51783 жыл бұрын
A combined lawnmower / leaf blower. Fantastic.
@billweyman72443 жыл бұрын
You like to fix stuff well I JUST LOVE TO WATCH YOU FIX THE SAME STUFF...
@SLCFarms2 жыл бұрын
What memories. My first lawn tractor at 9 years old was this exact mower. My grandfather surprised me when I got home from Boy Scout camp and it was the start to my landscaping business. Great little mowers. My dad had a 312-8 then a 520 hydro later in my life and I currently have a 520hxl that I still use today
@bobandes20163 жыл бұрын
I love your narrative at 21:30 about fixing vice buying new. I'm an old fart and have saved thousands of dollars over the years and felt great satisfaction in fixing my stuff. A few dollars here a few hundred there add up to big bucks over a lifetime. Not to mention the times when replacement parts are no longer available. Keep it up and I'll keep watching.
@richarddietz61453 жыл бұрын
I try an fix everything I can I’m just the same as you I love working on older stuff that nobody what’s to try to fix anything these days
@kentuckycornbread85023 жыл бұрын
I enjoyed this small engine repair video. Only small advice I have is invest in a box of nitrile gloves. I use to work without them and thought no big deal. After doing some research, the chemicals are slowly soaking in our skin into our blood streams. It causes a lot of problems a little bit later down the road. The gloves are cheap, give ya a better grip on things and protect your health. Take care buddy
@billyhensley5923 жыл бұрын
Can't beat those toros Matt they make a good weed eater also
@marketmalc3 жыл бұрын
Totally with you on making things work. Being frugal not wasting money.
@colebrown43983 жыл бұрын
I once had an old Wheel horse! sadly enough I was young and dumb and got it whisked away at an auction for only 20 bucks... I definitely wasnt smart. It did teach me how auctions worked, but other than that, that was my first ever personal project to work on and its only made me wish to do another
@davidsnow14813 жыл бұрын
Nothing like fixing or cleaning something for little to no money at all. Thank you for sharing keep up the good work and stay safe out there.
@michaelrickman31612 жыл бұрын
I went out and found some John Deere garden, abd lawn tractors. Planning to get them back into shape, but health problems, and weather conditions are slowing me down. 1983 John Deere model 111, 1990 185 Hydro, 1994 John Deere 265 w/46" deck, 1997 John Deere STX38 w/38" black deck, 2004 John Deere L110 42" deck. I truly am "lawnmower poor."
@timothycombs19823 жыл бұрын
When in doubt MORE POWER!!!!!!!!
@fishaussie91123 жыл бұрын
Great work on the mower
@iainsim76904 ай бұрын
One thing you really need is an ultrasonic cleaner for small & delicate parts, if you haven't got one already. It's a must have for someone like yourself and you'd be amazed at what it can achieve. Love the content on your channel, but I am often left in wonder why you don't consult the instructions more often, especially when they are available ! Keep up the good work and good luck to you from "across the pond"
@marychace10113 жыл бұрын
A guy my brother in law knows bought our Wheel Horse to do exactly what you’re doing. We then bought the John Deere off my brother in law. The WH was toast. The JD just has a starter issue. We hate tossing stuff.
@bradleysnyder47123 жыл бұрын
I use a piece of a scotch brite pad to clean the bowls and floats along with carb cleaner
@mattboswell53923 жыл бұрын
Varnished gas will give me a migraine like no other. But I love working on stuff that’s been sitting
@brianhillis37013 жыл бұрын
I had a coworker that collected mowers left on the curb every spring. He said there was rarely anything wrong except stored with gas over the winter. I pick up lots of vacuum cleaners and usually it is nothing more than hair or string on the brush or a hose that got plugged. Five to 10 minute fixes usually. Even if it is unfixable or more expensive to fix than replacement value the attachments and cord can be used on other equipment. In Japan many military people go out on trash day looking for discarded electronics. Perfecty good TVs and stereos are replaced every 3 or so years because not having new stuff implies you are poor. That is why decorative parts change so often, so people can date it.
@FlatThunder3 жыл бұрын
The wheel horse junkies would be all over this video. I think it's more of the light duty version, but still cool that it's back into the cutting grass business. It reminds me of my 704 wheelhorse. It's my everyday mowing rig. Glad you got her going again! 👍😁