2013 Ford Explorer Temperature Blend Door Actuator Replacement

[@mariahjohnson4731]

Theres two blend door actuators on this generation Explorer. For temperature differences (one side hot, one side cold) that actuator is behind the glove compartment as shown If its distribution of the air (side vents blowing but not the main vent) that blend door is behind the instrument cluster.

[@Craig_N]

I'm happy you didn't have to take out the dash too because I've got the exact same problem. Thanks to this video I might be able to fix it myself.

[@cadetauto1769]

This was the best video on this ngl, and turns out, THERE WASNT ONE THERE TO BEGIN WITH

[@johnmarcus65]

Great video. Instructions right on. I’m not a mechanic so it did take me about 2.5 hours. Worth every minute.

[@TheDieseldog]

Glad to hear 👍🏼

[@furiousstory4349]

Definitely was but I think I need a recharge as well

[@jnlp2005]

Thanks for the info! That garage door opener light at the end is a trip!

[@eddiegarcia5387]

Yup I worked Hyundai for 2 years learned lots everyday and now work at ford and learning new things here everydau

[@lealamb]

Educational and entertaining 😂 My 2019 flex is doing the same thing. Looks like o-smileies is in my future

[@Brandon-qe9bu]

Great video thanks for the help. I have a suggestion when replacing look up there is another connector upline on a bracket I just popped the connector there off of the bracket and was able to go under the wiring harness.

[@marlinyoung1606]

He did not show you guys where you have to remove the white plastic pegs on either side of the glove box. It is not just a yank and pull procedure.

[@DaFrostyG]

Love our ‘15 Sport. A lot of common problems. Timing chains, water pumps, PTU’s all garage. But we love it.

[@shellycolson9365]

Thank you here for the exact same reason ! I'll let you know how it goes :) going to look for part online now

[@DarrenTBallard]

What a miserable project! Glad you made this video. Sure did help!

[@ethiceze54]

That back bolt sucks to get. Luckily, I had this Titan 1/4 micro ratchet that worked better than any other ratchet I had including all my hinge and offset ones. I had to use a piece of tape to put the bolt in the socket to put it back on. It’s a pain, but I got it.

[@furiousstory4349]

Sir I greatly appreciate you have the same exact car same exact year same exact problem I really needed that

[@ethanthemarshian2082]

Dude this is awesome! Great video. Definitely would like to see more like this in the future.

[@jf5016]

Thanks for the great video. That damn wiring harness is totally in the way on my 2014. The filter was worse!. Ew Still going at it. I cut the plastic screw on the harness. That helped a little...

[@byronanderson2999]

My sons 2014 has 2 white plastic push fasteners one on each end of the glove box,we broke the tabs when we pulled the box out.

[@djrichintempo-djphotobooth4296]

Easy talk, I'll get to it, helped alot!

[@fogit4668]

I used a Dorman actuator. It lasted about 1 year. I have a Motorcraft one to go in this next time.

[@AdrianSanchez-uh8ci]

do you have the part number by any chance?

[@fogit4668]

@@AdrianSanchez-uh8ci Ford AA53-19E616-CB Front HVAC Vent Door Actuator / Lincoln #7T4Z-19E616-D. The Lincoln unit is supposed to be better than the Ford.

[@trev0r15]

Great video. I subscribed when you coughed and opened the beer. LOL

[@TheDieseldog]

👌🏼

[@TheKING2317]

Thank you sir for being just straight forward he’ll ya

[@wishbear1carebear]

"my mind says no, but my wallet says yes" 😅

[@aawannabe2017]

I had a b!tch of a time getting the harness out of the way and accessing the forward screw....and the best solution came from using a finger ratchet

[@chadriddle4357]

You was cracking open a ski. Which amazes me that it’s not just in KY.

[@dailydriver8280]

Did replacing the actuator actually fix your issue? The majority of the time it just requires reprogramming the HVAC Control Module and not replacing the actuator to fix this issue. Gotta love the dual climate system, right?

[@TheDieseldog]

It fixed it

[@JoeyWright10]

Im having kind of the opposite problem than you did here, when I have AC on for both sides the driver side blows cold air and the passenger side blows hot air. Do you think this would require the same fix?

[@TheDieseldog]

Definitely could be

[@rondo7565]

Did this fix work for you @jwright1099? I have this same issue. Thx!

[@JoeyWright10]

@@rondo7565 it did, just got it back yesterday and it seems to be working fine

[@esauolivera7736]

Good job where you bay parts amigo

[@eknight101]

Please tell me how you were able to re insert that top screw into the actuator. It's an absolute pain in the ass because of that plastic wired box being in the way. I've tried everything and I've lost about 4 screws in the glove box area trying to do it.

[@eknight101]

Never mind. I just deliberately roke the plastic housing and moved it out of the way. It did t seem to serve any meaningful purpose other than to organize a group of wire harnesses.

[@bris9984]

Would you know if this will help my problem My ac is stuck on cold both sides driver and passenger even when I move my temperature to 70°F it feels like I have it on low

[@alexiscarnduff]

Omg how do you squeeze fat fingers behind the wiring harness!!?!

[@caleb3310]

Every thing I see says passenger side is cold and driver is hot but my car has the driver cold and the passenger hot. Is it the same part I need to replace or a different one

[@TheDieseldog]

Probably needs driver side actuator then

[@bichn68]

Turn the clip around on your flashlight and then you can clip on the bill of your hat

[@dylantieszen8042]

Mechanic here, I will only ever put the easy to get to bolts back in.

[@ericriedesel1338]

Man. I bought a 13 sport about 4 months ago. This will be my 2nd replacement on this dam actuator. Forgot how to do it. Thought I'd check your video out for something quicker or easier. Anyways idk if buying oem makes it ladt longer or not. This doorman made it a couple months 😡😡

[@ricjuarez4742]

Thanks homie.

[@Seven_Craig]

On my 3rd one now.

[@thefarmandforge]

Can I use this audio to make a video?

[@toplistcrew7645]

You could have gotten a little motor from hobby lobby, then cut the outer black plastic and swap the one inside the blower out. They use those tiny little motors that are just about every kids toy car.

[@jonathon.scalise]

Would this be the same placement process for the 2013 ford flex?

[@TheDieseldog]

I’m honestly not sure. No experience on the flex.

[@danielsax9023]

Do you have a part number for this piece

[@TheDieseldog]

I would go OE part. This one failed again already.

[@jamesjones5057]

@@TheDieseldog Do you know what the OEM part number is for this part?

[@lamarmercer2370]

From R Kelly to 50 cent. But still helpful.

[@cvbluegrasspatriot9157]

Use old motor door shaft to check door movement.

[@fogit4668]

Sometimes you drop the screw when you are putting in the hard to get one and then you cannot find it and say oh what the H#LL.

[@mikeoliver1655]

Get a head light.... So Amazing!!!!

[@kaydonjesso7458]

Hey maybe put a disclaimer about the white pull tabs on either of the sides of the hinge, that you conveniently broke and forgot to mention

[@TheDieseldog]

You mean those white tabs at 15:24?

[@TheNfields260]

Can't even connect on the gorilla hands here lol

[@TheMetalmachine467]

lucky it was the passenger side driver side must be buried

[@martinplamondon7303]

That's not it now what ?

[@fordxl1967]

i just cut that door cover of

[@adamhg985]

Did this and wanted to bash the car with a bat afterwards. I real.pain in the ass. Ended up not even putting other bolt back in. One will do.

[@thomasrowes]

You did it wrong

[@thehollow7201]

Duel climate 👎🏾