DipTips: Spraying PlastiDip Without Texture

In this video, I show you how to spray PlastiDip with both aerosol can and a professional grade HVLP gun. Everyone can spray an aerosol can, but not everyone knows how to spray it while leaving a perfectly smooth finish. By the end of this video, hopefully you will have the skills to do exactly that.
Pre-Dip Spray ▶︎ amzn.to/2pSnetu
PlastiDip Aerosols ▶︎ amzn.to/2rot0Es
PlastiDip Gallons ▶︎ amzn.to/2rouXAV
Thanks for watching!!
______________________________________________________________
Please give it a like and follow :)
milmast Instagram ▶︎ / milmast
SickDips Instagram ▶︎ / sickdips
SickDips Facebook Page ▶︎ pages/SickDi...
______________________________________________________________

[@EngineeringExplained]

Great video! Was messing with some plasti-dip and some emblems, had a rough surface. Your tips address my issues!

[@NotsaeEgavas]

Well hello there Jason! Did you ever make a video of you dipping your emblems?

[@younggucci4934]

"That's enough talking for now, let's get started." Immediately starts talking.

[@SickDips]

+Brandon Darensburg Ahaha I actually died when I read that lol I watched the video too and was like, yeah.. i did that ahah

[@younggucci4934]

xD

[@Freshman24727]

Brandon Darensburg lmao xDdd xD xD XP CX xD

[@ryancarrington9418]

EXACTLY WTF I WAS THINKING!!! GOD HE TALKS TOO MUCH.... LIKE WE KNOW HOW TO SPRAY

[@Sergei_kv82]

You know only does it to make it to 10min

[@ErrorAcquired]

I spent an entire day looking for advanced Plastidip tips. This video was the BEST BY FAR. REALLY GOOD INFO

[@MeccaEl]

I used your method, to paint my bumper, and it turned out perfect. Thanks for your technique! 👍💯💯

[@johntopete4660]

I followed this procedure (after years of light coat recommendation videos) and I can honestly say I'm VERY impressed with the results on my 06 eclipse front bumper. Thanks sick dips! I learned something new watching this vid. Side note: I did my bumper the same last year with light coats and took it off after a couple months because I wasn't fully satisfied. QUICK TIP: spray the edges of the tape a couple minutes (maybe 1) before removing the tape, makes for some crispy lines. Careful with the dust. Good video, well documented. Thanks again for the help

[@joseherrera-ny3ro]

The comments here helped me more than the video. Saved me

[@chasingsacramento7048]

facts

[@swaygfx]

great vid, I've notice just before I watch this video of someone doing their wing and I notice the result was rough. that was the first thing you addressed in this video.

[@hades8653]

Been meaning to plasti dip the bottom half of my passat wagon. Been looking at how to for months, but this video has given me alot more guidance, other vids I've seen show lines and marks everywhere. I'll probably do a light coat first as I'm working on vertical panels, and then go wet coats from there. Thanks for the informative vid.

[@footballcoach1495]

You are the man. Those people at Plasti Dip should learn from YOU. They are not helpful but yours was very helpful.

[@benglez79]

awesome video i like how you get straight to the point and no tom foolery!

[@therealjoshtodd]

Great video dude. You really expanded on the spraying "wet" concept. I was definitely spraying too lightly, but when it comes out of the sprayer, it's "wet" so I didn't really think there was a difference. Someone just saying "you have to put down wet coats" doesn't really mean anything to a noob like myself since it's already a wet product! Thanks for breaking it down!!

[@dallasfortworthfoundationr8215]

I was getting some bumps in mine with dusting method, switched to wet like this video, and a hood scoop I was playing with came out smooth as silk... Great tip.

[@vaughnbishop6978]

Well explained and demonstrated. Great job man.

[@mtmals9786]

Thanks..really key....so I can correct a textured dip surface by spraying hot and wet.

[@JGunit]

Thanks bud, you're a good instructor

[@josephmalinowski6817]

Yo keep it up bro yr young and look and sound very professional keep it up bro that was one of the better videos I've watched

[@B_HarTz]

Great content, 2nd video you helped me with including the coil over adjustment video👍👍 subscribed

[@joelmclauchlin4920]

Sir, thank you so much for this video!!! I've been looking for months to see if it is absolutely necessary to by their (DYC's) little compressor. So glad you proved that the compressor I already have can be used!!! Thank you!! What's the best pressure setting to use???

[@thecolor]

gotta say, this worked great in reverse too... when I was trying to create a rubber snow flock ** something I could peel vs deal with scrubbing. For the "faux plasti flock" I just stuck it in the fridge. Worked GREAT and peeled so much easier than cleaning flock.

[@Sacha_Sayan]

Fantastically helpful video, thank you so much!

[@thinklikeido]

I used deep sea blue pearl over texture and it looks rather cool with the texture. I'll do better next time thanks for the tips.

[@matthewchute5514]

Thanks man! Really appreciate this video!

[@notyou1760]

Great video. You are so well spoken.

[@nixland]

Thanks a lot for the tips. This is what I need to know.

[@Andries747]

Hi great video thanks. Have you ever attemted clearcote plastidip on a wrists watch bezel to protect it from scratches?

[@djblackarmstrong]

Great video. What size is your compressor?

[@markg999]

Great video, very informative.

[@rafaelrjarquin]

Bro wet coat only the 2 or 1 last coats. Wet coat on first one will sometime get you some drips and trouble.

[@TechTails]

Only for VERTICAL situations. Horizontal has no runs...that defys gravity and newtonian liquid physics lol

[@1971mgb]

thank you for the very fine tutorials great job will use some of your tips are you using a turbine or the dip your car sprayer?

[@junythepooh]

Saved my life, thank you!

[@megamorphe]

I totally didn't go wet enough and started with two very tacky layers. So after glossifyer I have a textured finish that isn't what I like. Now I know what went wrong, thanks man!

[@brycesdad27]

LOVE the video!!!!! Other videos I’ve watched gives just the opposite advice put it on REALLY lightly in 20 coats! Yours looked WAYYYYY nicer! I’m gonna subscribe to your channel so I’m sorry if you’ve already did a video on this but have you used their “Glossifier”? I wanna paint my car but I don’t really want it to be a matte finish.

[@rockhard6082]

thx for the tips about using a htlp gun at what air pressure would you be at for a whole car?👍thx for vids

[@flynfury8363]

Great video. The wet coats with 50% overlap makes the texture look smooth. I put mine in warm water and the bottom of the can started bulging out. Maybe it was a little to warm. Lol.

[@plennon3574]

Very helpful and informative. Thank You

[@SickDips]

+plennon3574 No problem :)

[@lcano3004]

Thank you! Keep up the videos!

[@granjmy]

Excellent tutorial!

[@shaunreyes5092]

great video 1 question for you what PSI are you running on that HVLP gun?

[@DwayneDelacruz]

Good stuff bro! Subscribed!

[@flexmarchetti]

Great info, thank you..great job

[@rockybernardi2017]

thx for reply, keep the videos coming I need all the help I can get:)

[@TheLandofTofuCars]

Very helpful, many thanks!

[@williammartorana6295]

Great videos!!!! Really appreciate it.

[@ethanjohnson8107]

Very helpful. Thanks!

[@anthonyviscusi4042]

I'm planning on dipping a plastic bumper. Do you think I need to use the plastidip primer? I also plan on using the glossifier as the last step. How many coats of glossifier are recommended? Thank you.

[@valacent]

Thank you for the tutorial!

[@nathanwilson9965]

When using the hvlp sprayer, do you thin the gallons from DYC? I was told by DYC to further thin the gallons for an hvlp gun, but I have watched videos of people having success without thinning.

[@davidprush]

Great video and tips…thanks!

[@BobSmith-ye5gw]

great stuff, Milan thanks.....one question.....if I already have texture in my PlastiDip wheels, can I continue with wet coats to get a smooth finish, or do I need to peel off all the old stuff and start from scratch?

[@megamorphe]

There is probably a point of no return. Worth a replication trial to see.

[@mikehanratty4300]

video was well done. Thank you.

[@SickDips]

+Mike Hanratty No problem Mike :)

[@sierragold]

Great tips!

[@Fireball7285]

What song is your outro ! Also love your video great tips for my upcoming weekend project.

[@mmunoz5875]

Great video!!

[@raylawrence7732]

you make it look easy

[@DavidReyes0224]

could you link the video you mentioned at the beginning about spraying on the plastic wrap?

[@your_favorite_hiker]

So if I already put a few coats and it's slightly textured can I just finish with a wet coat. Or do I need to peel off and start over. I currently have 5 coats on .

[@mtmals9786]

Quick follow up. Hot dip applies much smoother..some reflection. True with Camo Green Verde and Glossifier just now applied...hot and wet.

[@JemimahWilliams]

This was sooooo helpful. I was like, "What is a Wet Coat?" I thought it was the Glossifier that sucked. It was only my technique. Gotta LuV KZbin.

[@fabianscandella6382]

Hi, I have to coat a 9mm Silicon hose (about 60cm in lenght). Any tips for me? Would you spray it or immerse the pice to the colour? Tanks in advance!

[@manutd4life253]

Thx bro. Great video

[@patwinders2894]

if i wanted to spray a clear / gloss at what stage would i do it and would it be wet spray or mist / layers

[@johnw4468]

Great vid bro, what size of tip do you use in the hvlp gun???? I don’t mean to be rude by all means but I need to know ASAP since the project I have time is a factor. Thank you

[@lulu210stunna]

So if car is already sprayed over a week now and has some rough texture can i use this technique and go over it all and get a smooth feel to it?

[@mugdays]

What does Fonzie from dipyourcar say to start with a light (not wet) "tack" coat if it introduces texture?

[@stone_pilot]

3 years late but it's diffferent - Fonzie is spraying an object that rests vertically

[@ahmadirdais7935]

SWEEET!! WHAT IS THE PERFECT DISTENCE TO SPRAY TEH PLASTI DIP FROM? AND DOSE IT CHANGE IF YOU SPRAY VERTICALLY OR HORIZENTALLY?

[@gerik3343]

so how many heavy wet coats do u recommend? do you recommend using glossifier?

[@timtan3695]

Good day Bro, hi im Aj from Philippines- Your work is so Good!! I'd like to dip my Mirage Car Roof.. How Many Spray Cans should I Buy??

[@vtchevalier]

Can you fix a previously sprayed texture with a few wet coats if the job is fairly recent?

[@IHateCrawlers]

you sir are a smart ass man😂 and hey I'm about to start the new KZbin channel because of you👌🏻 next week hopefully, its going to be on a customers 2010 mustang and it'll be on plasti dip. Thanks for the inspiration and keep up the great up work and great tips!

[@SickDips]

+Usman Syed (Uzii_mann101) Yeah you are :) I'd love to see the video after you're done 👍

[@IHateCrawlers]

+Sick Dips hahaa thanks man, I'll keep you updated!

[@SickDips]

Sweet :)

[@H.H.Tuned.]

Do you buy the sprayable dip for your gun or do you mix it yourself

[@toksagaremy8175]

When u use the spray gun Do you mix the plastidip with anything alse?

[@deanedward2379]

cross hatching helps even the coats as well. also, sanding with 6000 grit wet between coats , and tack cloth between coats to remove all dust particles is important.

[@jamesburton3183]

whats a better way to spray? dyc gun or air compressor gun?

[@anthonycaldi7056]

Great Video!

[@LVTHORAscending]

Does all this technique work for Nite-Shades as well?

[@diegoislas2927]

What type of filtration system do you have for your compressor and how much psi you getting ?

[@NickBen11]

Thanks for the vid man - had a question though. I found it funny that you recommend basically doing what Fonzie at DYC doesn't recommend...that is going heavy on the first coat? In his instructional vids he recommends doing light coats and building up the layers slowly? Just curious, as your finish seems to come out great with no texture. Do they heavy coats seem to just work better for you?

[@SickDips]

+NickBen11 I find that you can do it thick from the very first coat and you will not get texture with it. If his way works for you, by all means do that, but this is how I get it to work. :)

[@alyssapeters6271]

Warming the product is a good idea. I do this with my mascara 🤣 but it would seem you would also use less product? 🤔 Thank you!

[@billcurtis6727]

How about plsti-dip to cover an auto seat bolster with good foam ? will it last ?

[@juancarloregalado8452]

Can you use this technique for the roof (rattle can)?

[@ngarci8040]

Question: how do you spray the gloss.... I’ve heard you don’t let it dry before applying the follow up layers....

[@CrimsonBullet999]

So would I do a light coat first if I'm spraying hubcaps?

[@johnw6038]

What if I already got coats that are textured could going over it wet with following coats fix that? I'm used to using regular spray paint which you want to do quick passes

[@JustinsGarage]

Watched this after I messed up 😂

[@rca-559]

wth😂

[@otgtooffthegridtrailoutdoo9836]

Same here lol 😂

[@502Darrick]

I did my car rims, they look matte and grainy.. how do I get them shined and deep black? More color spray or more gloss?

[@WeebsLifeBalance]

I think its all depend on the surface you spary. If you spraying on flat surface of course this technique is better. But if you spray on rim with many edges and corners then thick coat will build up runs and drip on that part.

[@albion2742]

Is that stuff any good on plywood out doors.

[@derrickperry1657]

what gun are you using? and how much psi are you using at the gun? thanks in advance!

[@twinsnakesNT]

I have a Computer Science midterm tomorrow morning but I don't know why I'm sitting here watching this clip

[@bladder1010]

How long do you let it dry in between coats?

[@trainscronce6269]

What are those little imperfections in the dried and cured part?

[@caroquintero841]

Thought you were supposed to go light on the plasti dip for the first coat to avoid running drips. 🙀 Nice video btw will need to do my rims like this

[@DenishaDanielle]

I see what you did there lol. I was spraying it wrong. I used plastic dip on my emblems and surface came out rough but it made the red look matte. Still looks good though.

[@Forum4life07]

Can I spray a wet coat over already dipped parts to fix texture( dipped is a few days old)

[@joshshuza]

thanks for the tips

[@nchargeny]

does this apply to a vertical panel? wouldn't a wet spray cause it to drip?

[@kjpetitt]

thanks for this video. genius...absolutely genius. has DYC seen this? because they DEFINITELY tell you to start with that thin layer at the beginning, which is wack. Also, one other question: do you think it's necessary to use their prep solution? I've seen some people use rubbing alcohol instead...thoughts?

[@Dmc_3y]

Doing a very thing rear spoiler lip tomorrow.. should I do heavy coat first? A bunch of other videos say light coat first. But these result do look good

[@Dmc_3y]

Thin...not thing

[@rockybernardi2017]

hey thx for the vids very helpful, what air pressure did you use for the spray gun?

[@SickDips]

+Rocky Bernardi 18psi

[@aidenstone]

By spraying "wet", do you mean just push harder on the nozzle for the spraycan? Cuz I unfortunately already made the mistake but for future would like to know.,