Direct Fit Promaster LED Headlight Install / Upgrade

[@kneepayne]

Can confirm the install steps are spot on. I just put these on my 2016 (Roadtrek Zion). They are much brighter, but I did run into something the first day using them. When the headlights are on there is a loud humming sound, like a fan running. I don’t know what is going on, I may have to restore the original headlights until I can make sense of this.

[@juggernautusa]

The headlights do have fans built into them. If there is a particular bulb that is abnormally loud we can send you a replacement. Just shoot us an email at [e-mail]

[@steveg309]

I was struggling to get the low beam installed until I saw your tip about putting the bulb in the hole fist, then push the socket in over it. That worked, as opposed to my first attempt at pushing in the bulb and socket in while connected together. Thanks!

[@juggernautusa]

Glad it helped and thanks for your business!

[@bamuz]

6:08 bbbbbrrrrooooooo I’ve had my promaster for a few years and never knew this CLUTCH like and rated for that!

[@84miguelrivera]

What led lights reference I need what number for low and high thanks 👍

[@djmer28]

Do these headlights for the 2022 Ram ProMaster have a resistors to prevent interference with electrical issues or indicator on dashboard ❓

[@juggernautusa]

Yup they are built in. They mimic the OEM bulb resistance and don't throw any dash warnings

[@Jason-vh6nr]

What happens if you plug in the wrong way positive and negative and negative to positive or is that even

[@juggernautusa]

The headlight bulbs will line up with the housing so that it is always plugged in with the correct polarity. Of the fog lights don’t light up when power is sent to them, just unplug the connector and rotate it 180 degrees. No damage will be done if they are plugged in the wrong way!

[@kwekalu11]

I want to upgrade my ProMaster 2023 too but I can’t find any led lights that fit 2023 let me know if you find one

[@ranig2848]

Is it possible to replace the bulbs without removing the entire headlight housing?

[@juggernautusa]

I’m sure you could. Honestly makes it much easier to just pull the whole assembly off. Pretty tight behind the drivers light.

[@bamuz]

You can but no point in fighting yourself to get the bulb in

[@TimotheosEnterprisesMedia]

Are these lED lights heated to help melt snow and ice off of the lenses?

[@juggernautusa]

They don't put off as much heat as the stock halogens but definitely do put off enough heat to melt snow and ice.

[@TimotheosEnterprisesMedia]

@@juggernautusa very good, thank you..... I need to switch to LED at some point