DIRT BIKE ENGINE REBUILD (AMAZING TRANSFORMATION)

[@BaldurKhr]

Not only the job you've done is so professional, but also filming it looks amazing ! You've paid great attention to detail as well. You're such a pro. Thanks for uploading. Greetings from Romania.

[@briancraft2160]

Outstanding video. Thank you for being transparent and showing where a few mishaps had happened and how you back tracked to resolve them. It says a lot about your integrity. Well Done!

[@quadsport7022]

Your videos are the reason why I was confident enough to rebuild my CR125R.. so thank you bro.

[@colbyfranks2984]

Dude, that's an amazing video, well filmed, informative, and articulately explained.

[@2sikxd]

This rebuild has been spot on to watch and learn, just happens to be the exact engine I have so unbelievably helpful, only problem is you make me want to strip my engine right to the cast like this one and make it like new when in all fairness I don’t think I need to😂

[@yourselfdotcomlol]

Keep up the great content. These videos are way better in detail in dirt and iron.

[@ronshouldice6321]

Awesome build man! Great job!

[@jamarihickmon7795]

My fovorite part of dirt bikes is the engine and the gas tank and the throttle

[@Simon-lj8mt]

Wow dude u do a insane job please keep up the amazing work!

[@adampaganelli4891]

Really appreciate that! Will definitely keep them coming for you

[@richardstremlow6075]

That was very important tip talking about the oil seal and water seal.

[@adampaganelli4891]

Thanks man glad you noticed!

[@dakotathompson8062]

Pretty smart putting a yz250 clutch in it,how is it working for you?

[@Sms8668]

Adam. Incredible Work. I took some time off for awhile from Building/ restoring/ Bikes for about 8 yrs. I have 3 Sons who ride and after seeing you and Cameron’s Videos, I am Cerakoting everything in the House. Subscribed !!!!

[@adampaganelli4891]

Thanks man I’m glad you have been enjoying the videos!

[@jameiontaylor6207]

Awsome work brother

[@GODOY97GT]

Men , special congratulations from spain. I am a Cr freak owner from spain. Love engine rebuilds. Really nice job. Keep going! Just subscribed.

[@adampaganelli4891]

Thank you man! Really appreciate that

[@doublerrcycles1908]

@@adampaganelli4891 what's that tape your using?

[@doublerrcycles1908]

Looks dope bro, nice work 👌

[@jenniferbradshaw298]

watched the whole rebuild series,amazing job.what was the cost of everything?

[@Alexandre-fk5pj]

Parabéns pelo trabalho !! Ficou lindo.

[@alexferrucci5478]

You can use clutch plates from another bike?

[@silashamran]

Looking sick!

[@adampaganelli4891]

Thanks man!

[@cvdavis]

Great video

[@darioberriolo6806]

you are crazy broo!!!

[@richwood8042]

Top notch work!

[@adampaganelli4891]

Thank you!

[@armenvegas]

Wow subscribed! Whats it cost to rebuild a cr125 engine? Roughly. Thanks

[@Mechanimations]

Great work and attention to detail. Curious to see how the cerakote on the power valve arm holds up.

[@adampaganelli4891]

Thanks man! I’m excited to see as well, I am surprised they done come coated from the factory given how rusted that one was. I think it will hold up great!

[@sxfwilson6603]

With the seal on the water pump is it the same as 06

[@jamesclark8700]

Thanks for a very professional video. Great help

[@adampaganelli4891]

No problem. Thank you for watching

[@jamesclark8700]

@@adampaganelli4891 I can't find your first few videos on the cr500 rebuild today. Can you send me a link please.

[@jurwichers9070]

Why do you use aceton? Is that not to agressief?

[@TheEverLovingOutdoors]

What is that lighter color you used on the case? That came out clean!

[@richardstremlow6075]

On the left side cover. Is that paint? Looks good. The whole motor looks good. Whats next for you. I have a 1986 CR250r. that I am restoring.

[@adampaganelli4891]

It’s cerakote, more of a ceramic coating then a general paint

[@nicholasfirst7595]

Great video but that is now how the flywheel works I think you may need to study up on why a flywheel is used in any engine Coming from a master mechanic

[@UlisesGlez26]

Looks really good bro, keep it up.

[@adampaganelli4891]

Love the support man! Glad you enjoyed it

[@johncocktoasten4681]

Very well done 👍🏼

[@landonflorida3696]

The engine looks amazing good job👍 .I think it would have matched a little better if you had saracoted the whole bottom end the same as the clutch case.

[@robertandri5919]

Are you getting some ideas from cameron niemela ?

[@colbyfranks2984]

Question: The link to the Cerakote colors is for the air-cured versions of the coatings. I noticed that you oven-cured these parts, is that a mistake or did you do it for faster cure times? Also, what is the name of the Red you used? Thank you

[@maximilianbauer3138]

Which black cerakote is it?

[@TheMxjonny996]

Good Job . Greetings from Germany 😊

[@adampaganelli4891]

Appreciate that! How’s the weather?

[@TheMxjonny996]

@@adampaganelli4891 its very rainy 😂😄

[@Adam-lh3ul]

Hey dude, i'm currently rebuilding my 07 cr125. Ur build honestly helps me out so much man, you're great. Did you reuse all the bolts/screws/hardware or did your source brand new ones if so where can I get a full kit? Also, may I ask where you got the detailed diagrams? Thanks man :)

[@pggaming2706]

what kind of drill do you use is it an impact driver ? can you send a link of the exact model you use as I would like to purchase one also.

[@averyknight8309]

can you use pray paint cans for doing the clutch cover

[@k4kashi214]

whats is a 14 and 15 wather poump seals size?

[@jannievanniekerk6290]

hi adam, i know this is an old video but was wondering if there was any dowel pins installed on the waterpump cover? I am not talking about item 17 on your diagram. I have a cr 125 1996 and on my diagram it does not show any dowel pins apart from the same item 17 although two holes look slightly bigger for dowel pins.

[@PowderKegSoCal]

Looks Sick!

[@BoostMane]

What color did you use other than graphite black

[@adampaganelli4891]

They should be linked in description

[@troyjames5977]

Very nice!

[@adampaganelli4891]

Thank you!

[@Buffetology]

Hey can you update your cerakote links, Those colors are excellent and I am interested in ordering them.

[@adampaganelli4891]

Just updated the links, thanks!

[@RegulerShowTV]

what kind of masking tape is that? seems super sticky and easy to cut

[@honda8192]

Jim Bob it’s heatproof tape for powdercoating or cerakoting

[@marconav7972]

have you done a set of cases in cerakote yet?

[@adampaganelli4891]

Yes made a video on it!

[@marconav7972]

@@adampaganelli4891 I cant find it. I see where you did the side covers and those look great by the way.

[@mushmanist]

Can a 03 cr250 engine fit in a 02 frame Nd what year pipe shud use

[@somekindofphoenix7581]

Ive been using wiseco pistons (and I was told once you use them you cant use another) so will I have to waste the vertex piston that comes with the kit and get a seperate one?(on the full engine rebuild kit)

[@somekindofphoenix7581]

A mechanic I know that taught me to do top end rebuilds and has been doing it for a long time

[@somekindofphoenix7581]

Oh ok thanks mate

[@kngcobraon2wheels694]

just be glad on your engine there wasnt any striped bolts i was helping my friend restore his bike and atleat 1/2 of the bolts were striped and i had to drill through them

[@marconav7972]

or have you tried a different brand coating like KG or Brownell's?

[@adampaganelli4891]

I have not, but I do know people who have

[@robbieliddle5617]

Can i ask what carburetor you will be using? Standard mikuni or upgrade to a keihin? I have a 03 cr 125 with the keihin, just bought the bike and the jetting is off. Would like to know your input on jetting

[@adampaganelli4891]

I’m using a lectron so won’t be doing as much jetting. But definitely will have some jetting videos coming up, just not for this bike!

[@hawkgamer3354]

Can you cera coat cylinders and head cause I have a kxf 250 I'm rebuilding and think it would finnish the bike of to have a black engine

[@adampaganelli4891]

Good question! I Don’t see an issue with it though I have never done it before!

[@hawkgamer3354]

@@adampaganelli4891 yea after I commented I seen a kX 125 engine that had been done in that dusty bronze color

[@MediMoodz]

Inspiring

[@kamalbasnet8433]

Ya sir i am in nepal i say u ho to setting vr 150 bick engian

[@JamesJohnson-px6fo]

If I put regular gas in a 2 stroke 91 yz 250 what do i do?

[@harryorr7933]

dont ride it or it will sieze

[@joski9030]

Get ready to push it home after 2 minutes 😆

[@aldoggg]

Mesin nopo mas

[@honda8192]

Someone likes Cameron Niemela haha

[@samuelherr1702]

Just what I was thinking. I’ll give him credit tho it looks great

[@Sms8668]

First time I ever powder coated I put a BBR Swing arm in the Kitchen oven and ruined Thanksgiving dinner.

[@adampaganelli4891]

Lol

[@2DclanSnipingTeam]

I don't get it. Most people your age can't afford to go to dinner, yet you, Cameron Niemela and his brother Devin seen to have unlimited resources, tens of thousands of $ in new tools and hundreds of thousands of $ in property and facilities. How do you guys do it?

[@paulhetherington3854]

No mention - of why: It had - any bottom end? B'= two of! ot= gay in kaldee. Now remember - any YZ= emblem of - tool!

[@TheNpcNoob]

Did an engine rebuild and it blew up😂😂

[@mac6417]

Just go buy some razor blades lmao no point in spending $15 on “gasket scrapers” I thought u were joking 😂

[@nicholasmorris617]

Should have coated the whole engine man

[@chaseaf161]

Can u just use a new razor for removing gaskets

[@adampaganelli4891]

I use plastic razor blades you can use metal. The reason I dont is because if you slip you risk damaging your sealing surface because the steel cuts into the alluminum

[@tharabiju3091]

Podan

[@darioberriolo6806]

sei un pazzo

[@Veelad34]

Bro, put more effort than Honda did into the engine😂

[@davidofqwerty]

What size nozzle did you use for the spray gun 0.8???

[@adampaganelli4891]

Yes .8

[@davidofqwerty]

Hey why did you use a clutch kit for a 2005 yz250, thanks

[@adampaganelli4891]

As an example of how to install the clutch since I did not have the CR125r plates with me