Rekluse Torqdrive and Blais Clutch Weight Install

Today we install the Rekluse Torqdrive and Blais clutch weight, two additions to ‪@dirtniron‬ KTM 300 that will make his power more usable and stall less.
Rekluse Torqdrive: rekluse.com/pr...
Blais Clutch Weight: www.blaisracin...
If you shop online at Rocky Mountain ATV/MC please click this affiliate link to shop in the future. There is no extra cost & it helps support our channel. Remember to click this link RM ATV/MC -DBTV Shopping each time you need to go there to shop. www.rockymount...
Jay Clark/Dirt Bike TV has been around the Dirt Bike industry for thirty years and is always looking to learn and help others do so as well. Give a follow or drop an email if you have any questions or comments. Thanks for watching!
Instagram: @dirtbiketv1
Facebook: / dirt.bike.tv
KZbin: / dirtbiketv
Website: dirtbiketv.com
Email: [e-mail]
Thanks for watching, don’t forget to share and subscribe.
#motorcycle #dirtbike #twostroke

[@rayrokni]

Thx for your videos, great help. Fyi, I’m sure you know but i thought to mention for others; you are supposed to put all the friction plates and drive plates together before install and measure the total thickness, then refer to the manual setup page and it will tell you, depending on the total thickness which screw position to use on the pressure plate. They reiterate this point in the manual for proper setup, they go as far saying that incorrect setting of the pressure plate screw position can cause clutch damage.

[@BesharMohamed]

As per Tokyo Offroads video that I followed, the marks on the pressure plate is to set the spring in the correct position. There’s a tolerance of 0.1mm that you need to hit that makes sure the spring is flat. When I tore my clutch apart it was on setting two but that made the spring too concave. I set it to number one and the feeler gage didn’t go through.

[@ktmjay9920]

Thx for video. Really helps

[@spencerclark2269]

Nice video! Pretty easy process

[@rocker4life989]

Always extremely informative and to the point. Thank you Jay. 👍🤘

[@MP-wc2wh]

Great video as always.

[@francisguerrero3240]

Great info as always. Does Rekluse make a set up for an’07 CR250? I want to get a set for my ride

[@07yfz470]

Im wondering if I could add this to my CORE EXP.. i have a weight that I had on before...

[@billdeck9766]

Make sure the Rekluse metal plates go in the correct direction

[@nathanadams5582]

Question. I have just done an oil change after installing a rekluse cx a few rides ago. The oil is now a different colour to what it used to be. Is that normal? Thanks

[@deep4soul]

how many hours you get out of the clutch?