‪@DirtPerfect‬

[@dotbearwoodworking9342]

I made mental notes!!!! Lol

[@C_CEQUIPMENT]

Oh snap I was wondering if you were paying attention Lots to see!

[@timothydurm4366]

Nothing to see here, Officer.. lol

[@NOTINTERCEPTER01]

DP is in trouble now busted.

[@DirtPerfect]

Looks like I found the right shop for this job 😬😝 looking good guys

[@Cedarsman.]

DP you should be proud, these guys are really working perfectly, and they really respect you till they accept this job even they don't working on trailers usually 👍

[@Michael_CS615]

DP - I think you have scared them for life with your trailer. I suggested they have a new business "C&C Equipment and Trailers".... C&C reply was "Trailer shop is closed lol" .... tells you something???

[@daddywoofdawg]

@ 7:15 where the camera is showing the tires you have a screw in the tire

[@Oscar_1123]

@@daddywoofdawg You can see it better at 7:24.

[@C_CEQUIPMENT]

Thanks

[@terryrogers1025]

I could watch it all day long, no problem with the length. I like the “ do it right” comments and attitude as well as the follow thru on it. Stay the course, looking forward to part 2.

[@C_CEQUIPMENT]

Thanks

[@Letstieoneon3194]

Is this Terry Roger the fishing guide

[@judymahanna4227]

From JUDY and JIMM in Texas NO way We could have done better ,Ya Know how mikey is about $ - ;) JIMM

[@kevinfrerichs8589]

DP is going to owe you big time for this, looks like it needs a lot of repair.

[@willb3018]

As was said early on in this video, maybe a new trailer (new to DP I inferred) is in order. Anything can be fixed, but......

[@Losttoanyreason]

He will be bleeding green.

[@tonepoem4438]

25 years from now that same lowboy trailer will be back again for further repairs?

[@carlthor91]

@@tonepoem4438 All depends on how much salt he runs it through in the winters.

[@nilskalvik9123]

I seriusly hope you pimped M.r DP's flatbedtrailer with C&C Equipment mudflaps😂

[@C_CEQUIPMENT]

You bet!

[@troymeredith9528]

Perfect opportunity for some free advertisements.almost full rebuild .

[@billvandorn5332]

Like the way you think!

[@bradstubbings9871]

Awesome job and video. I don't care if the videos are 45 minutes or 2 hours. Just love watching you guys building things ❤️. Would like to see you build a trailer from scratch. Can't wait to see the camper truck. Keep up the awesome videos.

[@C_CEQUIPMENT]

Thanks

[@Elizabethhermes2892]

Nice to see friends helping friends! Helping Dirtperfect

[@dennymarreesr6187]

You guys do really good work Clinton!! It’s good to see people that actually take pride in their work! Thank you sir!

[@C_CEQUIPMENT]

Thanks

[@robertironside3166]

Definitely like the longer videos. I'm crippled up with a lot of pain and will load up a list for the night and like to watch when I can't sleep [which is most nights]. So ya, the longer the better and the content tends to be more detailed when it comes to the maintainence videos. All good stuff Clint. I'm enjoying these videos a lot.

[@woodstock048]

Just in case you didn’t already know, you are becoming one of the best channels on KZbin, you are an artist. Good job!

[@C_CEQUIPMENT]

😁

[@kopenhagenkid]

Great video Clint good luck fixing Dirt Perfect trailer

[@lancemartin1153]

More videos like this one please. Loving the channel. Cant wait for part 2.

[@C_CEQUIPMENT]

Thanks there coming

[@travelingbadger]

35 to 45 min. videos are just about perfect, I don't mind longer ones though. I love the pride you take in your work. Unfortunately there is just not a lot of that these days.

[@briankaitschuck125]

Clint you do remarkable work. You don't skip a beat. I'm sure Mike from DP will love what your doing to his lowboy. I'm also sure your workmanship is better than what another trailer shop would do. Mike made a great friend that's for darn sure. You should paint the frame all up and give DP a big bill for making you do the trailer you do not do it's your kindness that is getting that job done. I love to see your videos make them longer.

[@daviddeering1101]

Enjoy seeing craftsman do their trade, good to see you helping Mike out, look forward to seeing the completed job.

[@johncambra9332]

You guys are real pros, both in technic and craftsmanship. With all the correct tools and expertise, fabrication is spot on. I like the forward-looking with the painting of the backsides overall great work.

[@Letstieoneon3194]

1 hour of this kind of content is just right for me. DP is like my x wife, just keep showing up at the door , only he brings money instead of taking. You boys are cooler than cat shit in Feb.

[@C_CEQUIPMENT]

😂

[@coldcaribbean]

I love these rebuild videos. Mike's going to have a sweet trailer when it's done! Looking forward to part 2

[@C_CEQUIPMENT]

Thanks

[@samtorres711]

You Guys remind me of the old days when people were proud to their best of their jobs.

[@matta3888]

Sam Torres, You are describing an old Army standard. Do your best for the government.

[@michaelmoran6861]

Great video. I can see why DP wanted your help. I was glad to see the sand blasting cabinet being used properly. About 5 years ago I came across someone who was sand blasting granite grave headstones and the granite was too big for the cabinet. He disabled the interlocking guard on the cabinet and just draped a sheet over the granite when it was being sand blasted. He didn't care that he was exposing his workers to silica dust. It came back to bite him on the backside, after a worker quit in disgust and reported him to the UK Health and Safety Executive. A nice large fine and prohibition order followed. Cheers Michael (from Scotland)

[@gangstabunny4lyfe]

I love watching you and the boys work you are a real craftsman and your crew is amazing to see.

[@ericduck8273]

It is so good to see that you go a step or two further than the minimum, because it is so much easier to fix now than have to fix something else a year or two from now.

[@genegoodman5233]

I don’t like 5 minutes, anything else is ok. Your the first person to say rust converter on Ytube. I started using it 30 years ago, helping my son restore an old Chevy pickup. Replaced a lot of the floorboard and used a lot of converter to stop and convert the rust to a primer. Told a lot of people and ytubers about it. I like watching your videos cause you help do the work and explain what/why your doing it. I like your floor jacks, looks better than a hydraulic or post, put them where you want to. Stay safe Charge him20% extra, he can afford it hahaha

[@scottdominguez7939]

Great job brother I do like your videos and it's good to adventure outside the norm.

[@C_CEQUIPMENT]

Thanks

[@donnal.oglesby4806]

Clint, knowing you don;t USUALLY work on trailers, but so glad you did, to help Mike [ Dirt perfect ] out, since this job, in one of his more recent videos that he droped just a day or so ago, when he bought a JRB lift for scrap price from a dealer in his area, it TORE us most of the boards on this exact trailer.. What a mess it is currenly. Thinking maybe heavy diamond plate on it,??I found this video VERY interesting. sadly with all the salt on the roads during the winter, and running this trailer dsuring thr winter, is how the salts eats away and promotes to all the rest..This video showed all the talent and Knowlege that you have, from inspection to parts to weilding, and your sttention to detail on everything concerning this trailer and to keep Mike safe when using it.

[@innertubemac]

I enjoy your videos , long or short there always interesting and real work . Good to see your fabrication skills and workshop tools .😀👍

[@edwardgaskin4245]

Clint great job welding all those plates up. Looking good

[@billlewis4554]

Love the step by step detail. You didn’t skip over much and come back and it’s done. Nice to see it one step at a time. Great job. Do it right one time.

[@garyjustliving3963]

Anyone else see the Phillips screw in front left lowboy tire lol. Great video .

[@w056007568]

I find this type of work most interesting and frankly educational from the initial inspection through more thorough investigation and subsequent repair. Those U bolts were quite frightening when you see the extent of the damage caused by corrosion. That plasma table and press are just something else!! - Precision work and such a time saver

[@Losttoanyreason]

Yes, the U bolts were down right scary.

[@Dmenbiker]

Your attention to detail is special... Few show such passion for perfection...

[@johnwatts5690]

It is impressive watching you and your guys work. You are so conscientious about you work. I can see why you have done so well! Keep it up!

[@DaleDirt]

Mike is a smart guy .He knows you will do a great job over and above . Even though this repair will cost several thousand dollars , it's cheap compared to the longevity you just put back into service of this trailer . It's always best to let the pro's do what the pro's do . Don't worry about how long the video's are , it's good stuff and we do appreciate it .

[@Tom_Monahan]

Can’t wait to see the finished product!

[@woodydowler1594]

At 79 I'm learning a lot about welding among other things like helping you fellow contractors. Very enjoyable.

[@billyjones1969]

Great videos and nice work on it and the length of time is great can't wait until the next one

[@C_CEQUIPMENT]

Thanks

[@ep9360]

Agree with Terry, could just watch all night long. Whatever you guyz are doing is entertaining and educational. ❤

[@kwshilts]

Your videos are great. I am glad I subscribed to your channel. You and your team do great work and you take pride in whatever you work on

[@C_CEQUIPMENT]

Thanks

[@kevinlamarr1424]

I bought a 1974 Muv all lowboy trailer and I want to strip it down completely, get it sandblasted then I’ll rewire it and repack the cylinders for the dove tail. All that to say, I like the longer videos that show all of the tear down and explain the how and why of everything. It has 8.25 R 15 on split rings.

[@michaeladams8532]

I bet the change is what you and the boysdid was nice in a way.Am so impressed with your shop/business and way you all roll.Thank you for sharing your profession.

[@gordontyrer2039]

I enjoy watching y’all repairing that trailer or any piece of equipment. I have learned a lot as well. When you get done it’s going to look like a new trailer and you shouldn’t have any trouble with DOT either! I like what I see and the owner should feel the same. You guys do it right the first time and that is the right result.

[@fred-cm2dc]

great job so far , I think I would go one step more after paint I would use some wool wax or fluid film on the painted parts before putting air bags ,tail lights in

[@clintonwiles5451]

Be blaster got a product that’s suppose to be better than wool wax or fluid film. Clint and his crew is doing a good job on DP’s trailer I’m sure Mike will satisfied

[@dennislaws5187]

I am near 70 been doing this kind of stuff all my life, infact still at it I just finished building a portable bandsaw sawmill with my hands from a pile of steel and parts.. I wish I lived near you folks.

[@donaldcralton34]

looks good Clinton, I've done a few of those in my day, retired from the coal mines now; but it did bring back some memories of the work and good men I've worked with. thanks! good content.

[@C_CEQUIPMENT]

Thanks for watching

[@michaelsaintjohn3503]

Hey Clint!! Awesome job as usual, you guys are good at what you do, true professionals. The humor is a hoot. When you, Kevin & Mike get together there’s sure to be some laughter, I don’t mind the long videos their very entertaining keep the videos coming Mike.

[@jimwesselman]

Clint, love your work ethic! Let the video role. The old trailer is finally getting some TLC, it has to look good too, don't want the 850J to ride on a piece of crap! Just needs some Fluid Film on its' bottom to keep it from getting rusty, which I have 5 gallons of and would be happy to come up and spray it on at no cost if you would think it's worthwhile!

[@C_CEQUIPMENT]

Thanks You have to talk to dp about that

[@Anonymous..VQ3.5Lg35]

Lmao the forklift exhaust is hilarious!!! Hell yeah!! 😂😂

[@rickpabalis7987]

Clint I can't tell you how much I enjoyed this video.I have watched a lot of yours but found this one addicting. Looking forward to number two.

[@reedburke7762]

“Serious weight reduction going on here!” Love it Clint! Taking care on Mike, love that too.

[@cliffthelondoncabbie]

wow i live for this stuff, the smell of grinding the crap off and welding new metal in. found you because of dirt perfect and sooo glad i have, Its 👍👍👍great way to spend a saturday afternoon instead of gardening lol

[@Jameson4327]

Personally I like the videos broken up. I do like being able to have the second part to be able to watch it. There’s nothing worse waiting a week or longer for the second part. DP

[@jameszivko5531]

A half hour or so video sounds just great. Keep up the good work.

[@PatrickBaldwin1]

Did you fix the screw in the tire that you can see in the tire at 7:09

[@scottsorter7]

also at 648

[@PatrickBaldwin1]

@@scottsorter7 yeah there's another one a little bit longer into the video too. I think it totally like four times it shows up as it's rolling in the shop

[@C_CEQUIPMENT]

Yep Good eye watch the second video!

[@Froggy_Devil]

I sure am glad DP found you, let us find you. Looks great. Can't wait for part 2...

[@samb3706]

DP will have a hard time accepting a "good as new" repair, as opposed to his usual "fix the broken stuff" repair. You are exploring virgin territories!

[@DirtPerfect]

Sorry Sam don’t understand that comment at all plz explain thanks

[@samb3706]

@@DirtPerfect What I was driving at is that you have a business to run, so your repair philosophy has to be "fix what is broken and let's get back to work", while this C & C overhaul is more like acquiring a new or totally reconditioned piece of equipment. No offense was intended, it is just that this overhaul [and the 850J] are new experiences for the DP company.

[@vicstevens1186]

Another excellent video, Clint. Your videos are never too long. Keep them coming!

[@sparksmach1]

Definitely don't mind the longer videos! Keep em coming haha

[@JCrook1028]

I like the long videos like this. Perfect length to me.

[@jred4421]

Another one here whom can watch this type of content all day long...IMHO, this video is not long at all. Amazing attention to detail. Recently new to the channel, and catching up on the past videos. Great stuff Clint to you and your team!

[@C_CEQUIPMENT]

Glad you enjoyed it!

[@ggreenlee19]

Clinton regardless of what you say you do know what you are doing. Love to watch you guys work.

[@C_CEQUIPMENT]

Thanks

[@michaelmahoney5885]

Amazed at all your metal fabrication skills

[@michaelmahoney5885]

Great help when no one else would respond. Makes your videos more interesting to watch. The mechanics overall are interesting to watch and appreciate if you own a trailer like this. Thanks for doing.👍

[@C_CEQUIPMENT]

Glad to help

[@forthrightnight]

Watched every minute! On to part 2.

[@The-Deadbolt-Deputy]

Doesn’t take long to figure out that when you guys do something, you do it RITE !!! I like this kinda stuff. Now I fully understand how these trailer brakes work. Thanks Guys. (Seth from North Carolina)

[@golfer963]

Awesome video. We could tell you take pride in your work. And because you stood behind dirt perfect 1st dozer. You will have plenty of work to do

[@latisimusd]

It seems "more often than not" that the right most rear shackle/leaf assembly has the most rust damage. I know that on cars I've seen/repaired the right rears swell so much it pushed the ABS sensor ring off the hub. Long trailers would be worse since they're getting the heavy blast of the brine-salt-gravel peening that shackle housing and Rust jacking it open "due to salt and brine it's lots of crusty dollar$ time". Great assessment of that low boy brakes/suspension. Joy to watch you fellas!

[@doug9418]

45 minutes to 1 hr? I just enjoy how you guys working together, no1 gets in anyone's way, each knows what he's doing. God Bless and have a great day. 🇺🇸

[@lesr5737]

Once I found your Channel I went back and watched all your videos that I could find I make it took all day Sunday LOL. You been doing perfect so far don't change a thing

[@C_CEQUIPMENT]

thanks

[@gliderider7077]

That’s so cool seeing you basically rebuild this trailer! Nice little series

[@jackgreen412]

Always enjoy these!

[@flipflop4364]

Love your attention to detail. Keep the videos coming. Man you do stuff the right way wish you lived closer to Texas.

[@C_CEQUIPMENT]

Thanks

[@albertdouglas7477]

Great work. Love the banter between you kevin and mike.

[@markfranks6750]

No problem with length. Enjoyed!

[@CaptainKleeman]

stopped by and looked at the trailer the other day, looks AWESOME!... i mean all of it looked good on pre trip a couple weeks ago, crazy all that showed up in that short of a time period...great video too. look forward to more.

[@C_CEQUIPMENT]

Thanks Everyone keeps telling me to make sure it Kleeman proof 🤷🏼‍♂️😂🤣

[@oldsmokeeater7075]

The length is just about right! Boy your work is excellent, the do it right in actions speaks volumes of your professiional work. Mike is getting a quality rebuilt trailer. You have the knowledge it is obvious and the supporting equipment to tackle the job.

[@C_CEQUIPMENT]

Thanks

[@edhammond8709]

Nice fabrication job and rebuild brings back memories of our shop

[@leer-winnobbeefarms2131]

Rust, the enemy of equipment owners! Good to see you taking care of a lot of rusted stuff on Mike's trailer. I'm here to tell you they don't do a good job of painting trailers. Then add, all the sitting outside in the elements you have the perfect storm for rust to wreck havoc. Thanks, Clint & Crew. Lee

[@C_CEQUIPMENT]

For sure Thanks

[@jackreed3445]

Nice shop, great lifts! I did notice a screw in the one tire when you had the camera situated on the frame as you were backing the trailer in. If you remove that you will save Capt. Kleeman some work. It's good to see a shop that does good work and is careful to take a look at everything. jack

[@jerrymclean8075]

I love the longer videos!!!!

[@Egghead2u]

Good job all the way around, including the video. Keep them coming.

[@C_CEQUIPMENT]

Thanks

[@joesphlavietes5085]

it was how u exsplane the project .it was nice to hear. thankyou.

[@nevillewomersley7841]

Great work there boys! Dirt Perfect will be extremely pleased with the results. Video was long enough, but I will be waiting for the follow up!!

[@2chipped]

I don't mind a full hr long. Quality repairs shine through in HD. In the see how fast we can do it society, its nice to see it being done right!

[@biggdawgg7455]

It’s gonna grow your channel for sure . Shows y’all can do just about anything.

[@joedoakes8307]

Great work and demonstration of shop skills !!!

[@justinhenry8745]

U r an awesome person thank u for helping dirt perfect

[@themoondoggie1]

Quality, supreme, ultra, deluxe content for us armchair and other mechanics to watch and learn. I like to watch videos that are at least 45 minutes to 1 hour long or longer. Great video content. Thanks to the Dirt Perfect KZbin channel for leading me here and Thank You for sharing.

[@C_CEQUIPMENT]

Thanks for watching

[@stevesmythe7215]

I don’t know abt the rest of your viewers but I enjoy the videos that are 45 min to 1.5 hours long. I also enjoy the auctions. Love your content…keep’m coming!- Steve, a relatively new sub.

[@C_CEQUIPMENT]

Thanks

[@davidbillings615]

Clint I like long videos when they are getting more in-depth. This was perfect for what you had.

[@lordbyrom100]

I could watch it all day long too !and …..we can pause it if the boss tells us to !! Find your work great to watch happy with and decision you make 👍👍👍👍👍

[@margyjr]

The length of your videos doesn't bother me, I enjoy all of your videos, keep them coming!! 😊👍❤

[@petemoore7315]

You can make the videos as long as you want them to be!! Nothing like watching pros with great ability, great equipment and a great work ethic. It is so nice to see folks doing things the right way.

[@C_CEQUIPMENT]

Thanks

[@sudd2685]

My goodness I could watch this all night, better than Yellowstone, thank you for your videos.

[@ROGE444]

I do like the longer videos, don't care much for the short ones, really enjoy your repair and fabrication videos.

[@simonkennedy2700]

The tail end is looking good After painting it’ll look like new again Nice job ❤

[@robertlight1710]

Don’t worry about it,enjoyed all that you do keep it up

[@leecurry14]

Brilliant video Clint, live seeing it done right 👌 let's hope in video 2 that Dirt perfect days just give the thing a full respray too 🤣🤣

[@clausiusuf]

Thanks for sharing this effort. Different and interesting. Tuning in for part 2.

[@C_CEQUIPMENT]

Thanks

[@merlepatterson]

Those upper stitch welds allowed dirt and water to get up inside of that rear angled trailer end braces. One suggestion which was handed down to me while using press brakes with small parts is to put them in the middle of the press brake so no torsion loads are placed on the press brake rams and attachment points.

[@C_CEQUIPMENT]

Good to know

[@VansHomeServices]

I like the length of the video 45 min is a good time frame. Looking forward to the second video.