disassembly and assembly Diana 34 - Part 1

disassembly and assembly Diana 34 - Part 1
HW 97K Accuracy/Beeman HW97K air rifle: • HW 97K Accuracy/Beeman...
Part 2: • disassembly and assemb...
disassembly and assembly Diana 34
disassembly diana,diana 34
assembly Diana 34
assembly Diana
disassembly Diana 34
diana 34 disassembly
rws diana 34 spring replacement
substituição da mola rws diana 34
mola diana 34
substituição da mola diana 34

[@shaundevrisky349]

I was not expecting that broken spring, I thought you were just going to grease it! It's been four years since I disassembled my 34 for maintenance so I needed a video to refresh my memory. Obrigado...thank-you, from the United States. 👍

[@JGSairguns]

thanks for the positive comment

[@williamarmstrong392]

Thank you for the video. My 34 just broke the main spring. That was easy enough .👍

[@Capt_Killingfield]

I am preparing to strip, re-stain, and Tru-Oil my Diana 34 stock. This video gave me the confidence to take apart my air-rifle. Thank you!

[@vittoriobiondi4855]

Is not needed to remove the barrel from the main pivoting point. Is enough that you remove the seeger ring and then the pin of the barrel charging lever under the barrel.

[@13ynysybwl]

I do like your spring commpressor a well thought out simple design,well done.

[@JGSairguns]

thanks

[@antonioamaducci4261]

Belli i fori per bilanciare il pistone 👏👏👏

[@joaoluizestevesnascimento1968]

Dez como sempre meu amigo. Att.João Luiz do RJ Brasil

[@JGSairguns]

Obrigado João!

Muito bom, estamos sempre a aprender coisas novas contigo, abraço

[@JGSairguns]

Fico feliz em saber

[@douguyguy]

Depuis peu j'ai acquis par hasard le même modèle de décembre 1987 (made in west Germany) également dans un état proche du neuf, je suis tout fou avec. C'est un bon modèle à priori? Enfin j'espère... peut-être pas le ressort du coup🤔. Merci pour la vidéo.

[@Steve-yz1eb]

Steel safety guns were the best !!

[@EASTENDGLEN]

replace the spring. although I have heard they are oversprung.

[@LowkeyAirgunner]

Was it still shooting fine with the broken spring or you could clearly feel something was wrong? BTW nice home made spring compressor very simple concept !

[@JGSairguns]

Thanks. Yes, I already felt that something wasn't right, sometimes the action didn't trigger

[@antonioamaducci4261]

Molla troppo lunga,si rompono,hanno vibrazioni e la forza è uguale.anzi meno. Accorciare sempre🤜🤛

[@marcostrydom5907]

my air rifle's spring also broke.what caused it to break?ps: i have a second hand air rifle?

[@gizmo9924]

Is it possible to leave the barrel connected to the compression tube yet still be able to remove the piston?

[@albertoguerreiro7439]

Muito bom !

[@JGSairguns]

Obrigado por assistir o canal, não se esqueça de se inscrever para não perder os próximos vídeos e activar o sino da notificações, abraço!

[@aimongarch8410]

Is it really worth the price? Or are we just paying for the brand name?

[@JGSairguns]

really worth the price!

[@jhjuwel5608]

Good video

[@vipengineer8107]

I already have diana magnum 350 spring piston air rifle. Can I install nitro piston on it .?

[@WILLY52368]

Why is it that when I disassemble my barrel there's only the long spring and missing the short spring like yours.

[@shitbird5241]

Older type got one that's really old and the small one misses aswell

[@raysantosray6441]

Perfeito

[@franciscomagro7243]

Bela geringonça para desmontar a mola. ;)

[@duhthankhongsam8141]

Diana 350magnum price kittna hain bhai.

[@jefffoale4740]

Just about to strip down Diana G80 that has not been fired in over 20 years. Is the process much different?

[@JGSairguns]

Hello, thanks for the comment. I don't know how to answer, I've never seen any G80. Hug!

[@sinhly935]

Bao nhiêu tiền khẩu đây vậy bạn ơi

[@AbdullahKhan-bw7wo]

Brother I need it help me,how can I get it and where

[@Ram-vt3rm]

Cool video. I have a 20+ year old Diana 34 with a bent barrel. Not sure how that happened. Do you know where I can buy a replacement barrel? After watching this video, I am sure I’ll be able to switch it out np. Thanks.

[@JGSairguns]

I'm sorry but I can't help, I don't know where to buy another pipe

[@Ram-vt3rm]

@@JGSairguns ^ all good, thank you, I will keep my eyes peeled.

[@RajuGupta-nk3tz]

Nice

[@jesseruks]

i have a very similar model to this. when ever i try and cock the gun by bending it back, it snaps back with prettty serious force. how can i fix this?

[@JGSairguns]

There are several factors that can lead to this problem occurring. Even a simple and common problem like a broken spring can lead to this. I can't help you without seeing the weapon, it's best to take it to specialized technical assistance.

[@jesseruks]

Thanks I might disassemble it and see if I can solve this issue. I believe it’s trigger related because it will sometime cock properly when I push the trigger forwards

[@chrisclifford1664]

Hello. Where can I find a new lever pin for a diana mod 40?

[@JGSairguns]

Hello, I don't know how to help. Thanks for the comment!

[@baoluu815]

Khẩu này bao nhiêu tiền việt nam đồng

[@mauriciomahecha9224]

Donde puedo. Conseguir. La mira. De la escopeta. De. Dardos. De. Adelante. Y. La de. Atrás. Para. La marca. Diana 24

[@JGSairguns]

Não sei.

[@j5primedt669]

Khau nay bao nhieu vay

[@reyhaniskandar6916]

Hey i have a rifle similar to this one, i bought it from second hand owner, problem is the front sight seems to be loosen and always fell of after I shot my rifle even after i tighten the screw, now that I tighten it too much the thread is broke. Any suggestion?

[@JGSairguns]

I'm sorry but I don't know how to help

[@reyhaniskandar6916]

@@JGSairguns Ahh I see, It's okay then

[@nyobtostxuastu7047]

Có ban khong em muốn mua 1 cái

[@SpitjoDaDeejay]

Good day my gun is not firing it takes out things like plastic in the barrel I don't know what's that

[@JGSairguns]

this can indeed happen, it is the piston seal that is old, rotten and is disintegrating.

[@SpitjoDaDeejay]

@JGSairguns yooh what am I going to do. The bullet just stuck nor move where I've inserted it 😕

[@phuongtuan3041]

Toi muon nhơ anh tu van

[@chiquynh1635]

Nhieu cay sung ban

[@shajahanc9073]

👍👍👍

[@azakchowns6752]

Just replace the spring

[@user-kp1cn2bi2g]

ยากได้มาก

[@aaminseliya1484]

Ketakeha bae

[@sunoajishrirajasa3261]

Price bos????

[@JGSairguns]

No sales

[@phuongtuan3041]

Cho xin sdt toi anh tư van

[@franksimeoni5380]

Weihrauch Is Better