for any query plz feel free to comment link of the cad file www.mediafire....
Пікірлер: 43
@shrutishgadakh28893 жыл бұрын
Thank you so much
@Ryan-ws9tj5 жыл бұрын
Sir, can you explain how to get 6660 watt on heat power
@AlligatoriRO Жыл бұрын
Hey bro nice video, really good explanation. Could you answer me a question? Do I need to apply on the brake pad both Force and pressure? One of each is not enough? Thanks!
@Cadknowledge Жыл бұрын
Both are necessary in my case. One of each can be enough if you have some other kind of design
@AlligatoriRO Жыл бұрын
@@Cadknowledge I calculated both Hydraulic Pressure and Hydraulic Force made by the brake pads. If I apply both I wont be applying double loads? Pls help me understand that, will appreciate a lot!
@Cadknowledge Жыл бұрын
@@AlligatoriRO we need to talk about it I can't say anything. I must need to know all the boundary conditions
@AlligatoriRO Жыл бұрын
@@Cadknowledge Okay. I fixed the disk brake on the screw holes, applied force only on the internal brake pad since its a floating caliper. External brake pad is fixed while the internal is only contacting the disk brake. Dont know if this helps
@Cadknowledge Жыл бұрын
What's the point of applying break if your disk break is fixed?
@kalyanreddy62604 жыл бұрын
Can anyone he.p me how to get split line . I have made brake pad and assembly to my disc but I'm not able to get that split line
@Cadknowledge4 жыл бұрын
Watch my this video steps are given if u still face difficulty comment and subscribe the channel bro there are many cool videos in this and more are coming kzbin.info/www/bejne/a5e1iHyOl8qFpJI
@abhirambharadwaj27926 жыл бұрын
how is the temperature 100 kelvin? in the result of thermal analysis?
@theochoisnet72576 жыл бұрын
i want to know why too
@karanpunjabi30774 жыл бұрын
Same question
@brucewayne32272 жыл бұрын
@@theochoisnet7257 hey, i don’t know if you still remember after 4 years, but how did you fix it? I’m trying to get a positive temperature and it’s giving me negative temp. Thanks
@brucewayne32272 жыл бұрын
@@karanpunjabi3077 hey, i don’t know if you still remember after 2 years, but how did you fix it? I’m trying to get a positive temperature and it’s giving me negative temp. Thanks
@karanpunjabi30772 жыл бұрын
@@brucewayne3227 Hey bro, Sorry to let you down but i don't remember it. Infact I don't do simulations anymore.
@SagarPatel-gy5dc6 жыл бұрын
can you tell how can i select only the brake pad portion for applying forces? do i have to draw the brake pad portion? if possible can you send me the file?
@Cadknowledge6 жыл бұрын
the link of the cad file is in the video description and here is a video tutorial watch this it will be helpful to u kzbin.info/www/bejne/kIaYpIGpedCKhqc . if u like my video plz like, subscribe and share . thank you for watching
@koushiksriram98536 жыл бұрын
U can draw a brake pad profile on the disk rotar and then use split command to obtain a seperate brake pad portion
@theochoisnet72576 жыл бұрын
Plz can you tell what’s the rotation speed of the wheel?
@Cadknowledge6 жыл бұрын
Théo CHOISNET initially velocity is 22m/s we know v = ( 3.14* diameter*rpm)/60 From this equation you can calculate rpm there is another video of stress strain calculations on my channel u can watch it will be useful for u
@theochoisnet72576 жыл бұрын
hpe ty very much can you just give me the diameter? I will check the other vid of your channel soon bro
@MouryaWorks6 жыл бұрын
take it as 28.32 inch but i advice do your own calculation for the best result kzbin.info/www/bejne/a4ObXmisiraVjbM here is the video i am talking about
@Cadknowledge6 жыл бұрын
well i guess my friend amit mourya clear all your doubt have a great day dont forget to subscribe
@mahsahamidpour52972 жыл бұрын
Hi, Can I have the formula or any paper related to this project?
@HaiTran-km8qw8 ай бұрын
Nice video bro, but I don't understand 1 000 000 N/m2; 497N is what, pls help me
@Ryan-ws9tj5 жыл бұрын
Does high resultant heat flux means high temperature distribution on the disc ? Please someone help me.....
@Cadknowledge5 жыл бұрын
yes but the distribution of heat in not uniform through out the disc it will be high and low at some place
@BaljeetSingh-ku2mi3 жыл бұрын
Hello sir. I too am working on disc brakes thermal analysis. Please tell how should i work on it. What calculations should I do and how to proceed with it.
@Cadknowledge3 жыл бұрын
First make list 1. What is ur brake load capacity 2 .how much load you are applying 3. Break material etc
@BaljeetSingh-ku2mi3 жыл бұрын
@@Cadknowledge I am considering for a car, m testing for 4 pre defined materials in solidworks.
@Cadknowledge3 жыл бұрын
I recommend you design table for better results
@BaljeetSingh-ku2mi3 жыл бұрын
@@Cadknowledge Table?
@BaljeetSingh-ku2mi3 жыл бұрын
@@Cadknowledge Whats the brake load capacity, the point 1 that you said?
@user-wy9lz4hx9x Жыл бұрын
sur .please give me theoirical parts of this analysis