Discover Goingmake's Latest And Greatest Woodworking Tools!!

[@RobertHenris-rr5vd]

I've seen a lot of these tools on Amazon but now im going to actively look for this brand thanks to your videos. appreciate your time and attention to detail.

[@ShopRamblings]

So far, I have been disappointed with any of their tools.

[@marilynhorvath5849]

That’s an awesome pocket hole jig! I need this! I have dabbled in woodworking for a long time but have recently gotten into it more. Researching different tools and tricks to become better and came across your videos. Love your honest opinions and instructions. Thank you.

[@ShopRamblings]

I am glad you found it useful.

[@af4jm]

Demo videos are so much better than Amazon reviews to know these items are worth the price... thanks!

[@ShopRamblings]

Glad you like them!

[@hoxha34]

i respect your honest opinion on tools you receive for review. i appreciate you taking the time making the video.

[@ShopRamblings]

My pleasure!

[@georgeinthejungle6095]

That pocket hole jig looks great . can be a great upgrade from a small plastic kreg that was an upgrade from home made (wood and aluminum tubing ) jig before. One step at the time is the right approach for a weekend wood workers

[@ShopRamblings]

Definitely, I am constantly upgrading as I can. I started with the small Kregg. I then moved up to the Harbor Freight benche top one. This one is definitely a nice upgrade from both of those.

[@jeffreydickinson5328]

My grandson and I have just started woodworking together and we're looking for quality layout tools. We were shocked at the prices. Thank for these alternatives. Your videos are great keep them coming.

[@ShopRamblings]

That is awesome! The experience will be priceless.

[@ShopRamblings]

Email me at [e-mail]

[@robertkerby2581]

I absolutely loved these three tools that you demonstrated with precision! Well done, Sir!

[@ShopRamblings]

Thank you very much!

[@mak4374]

I like their stuff. Well built, accurate, thoughtful, good prices. I will have to try the pocket hole jig when my current plastic one kicks the bucket.

[@ShopRamblings]

I've had one of the blue plastic ones for 15 years. They hold up surprisingly well. It might be in a long wait.

[@orestc]

After watching your videos, I’m a convert to Goingmake!

[@ShopRamblings]

That's awesome!

[@michaelbrennan9805]

Picked up you channel by chance, what a stroke of good luck. I have seen a couple of shows using Goingmake tools so watching your show I got chance to see the build quality. Liked your comments and tried to purchase one of the tools shown, unfortunately over here in the UK we cannot get most of the tools shown yet, maybe in the future. I have heard that they may be putting a website together. Fingers crossed. Until then I'll keep watching your channel what a great find with honest opinions good or bad.

[@ShopRamblings]

Thanks, I am trying to stop doing reviews so I can do more project videos. This makes me very selective as what I review. I just turned down 6 products today. I am glad people find my videos informative.

[@scatwater]

Nice review and good to see a company that takes constructive comments to heart. I may have to give that 4x5 a shot soon.

[@ShopRamblings]

That seems to be a popular item. I also have a 3x4. I like it better.

[@ST-0311]

Nice tools. Good on GoingMake for responding to feedback. The pocket hole jig is the same design as the Enjoywood one sold by BangGood (and now Amazon). Both are based on the Massca, but the GoingMake and Enjoywood both have 3 hole guide bushings rather than 2. The Enjoywood, doesn't have any blowout on the side of the pocket holes, but the end of the holes are not as clean as with the GoingMake. The Massca and Enjoywood both come with steel rods that can be used to stabilize the jig, but that doesn't really matter if it's mounted on a table. Of the three, the GoingMake looks to be the best value as it's half the cost of a Massca, and 25% less than the Enjoywood. Nice touch adding 1/32 increments to the thin rip jig. I don't know of another one that goes that small. You're almost to 11.5K subscribers. Better watch out, or the next thing you know is that you're suddenly famous.

[@ShopRamblings]

I have several items from Banggood also. It seems the Goingmake tries to and something extra to all their tools. The first several emails I received from them all asked for feedback on how to improve their tools. It seems their goal from the beginning has been to make better tools than what is already being produced. I respect a company with that philosophy.

[@NOEbeil]

many greets from Germany and thank you for your review and I communication with the company for making better tools :) this tools looks awesome thinking about to get some. thank your for your explanation and your time for testing it. I MA very interested in these tools

[@ShopRamblings]

Some of my favorite tools are from Germany. Unfortunately, many are hard to get or out of my budget. I hope to get over there one year.

[@louisdeschamps3430]

looks solid and lasting ,very ihterested in this brand of tool !

[@ShopRamblings]

I am still using them and they are holding up perfect.

[@Todd-W]

I've got a couple of different tools from GOINGMAKE and I'm quite impressed with the quality.

[@ShopRamblings]

I was pleasantly surprised at their quality when they sent me several of their tools. All were high quality.

[@patmash]

Awesome video. I like my HF pocket hole jig but, it’s time for an upgrade and this looks like the one. Thank you sir.

[@ShopRamblings]

I have the HF one. I have built a lot with it. The way this one is built itbmakes a much smoother hole. Dust collection makes a huge difference.

[@JWick-hz6yt]

I like that saddle square I’m going to get me one of those. I’m getting ready to put new stair railing in and that will work great for marking the newell post and the angle for the top rail.

[@ShopRamblings]

I just built some stairs last week. It probably would have helped if I had one.

[@gregghernandez2714]

I have to agree with you on the color. There are so many companies trying to make their tools look like the high end Woodpecker tools. Very often they turn out to be poor imitations of a quality product. I've been in the market for one of those thin rip jigs. I'm going to get a black one and start my going make collection. Thanks.

[@ShopRamblings]

I had some red ones. I like the black and white better.

[@ShopRamblings]

Email me at [e-mail]

[@FearsomeWarrior]

Looks great. I bought their shelf pin guide maybe a year ago.

[@ShopRamblings]

What did you think about the quality?

[@FearsomeWarrior]

@@ShopRamblings It’s fine. It’s just a rectangle plate with holes for pins to locate, and drill bushings. I think the bushings might wear out because they’re not super hard ones like in JessEm dowel jig. Anodizing aluminum can be done many ways with improved durability and I doubt they’re going the extra cost route there. It is thin, soft, and scratches easily. It doesn’t need to be that good, again, it’s fine. The design is good for a compact jig.

[@kenerickson4923]

I have the old Kreg K4. One advantage of the Kreg is that you clamp it to table near the dust port. That would be an improvement to the Goingmake. I like the removable drill guide. I need extra guide for Kreg.

[@ShopRamblings]

They both have some good features.

[@kenerickson4923]

@@ShopRamblings yes I can't justify buying a newer Kreg model. My initial response was that the goingmake was a copy of the k4 until I saw the feature difference. I'm impressed with their products I own

[@rojhann]

Thanks for the video the tools look really well made and strong like the look of the pocket hole jig too, thanks for the demos

[@ShopRamblings]

I really like the pocket hole jig. I have a couple of different ones. This by far is the best store bought one.

[@rojhann]

@@ShopRamblings Thanks always nice to get a replay, I just have the small Kregs which I find really useful.

[@bradb8292]

Thanks for another good video. You and the fellow from Hooded on Wood aren't afraid to give feedback to these companies, which they often listen to.

[@ShopRamblings]

Goingmake asks for feedback. That is what impressed me the most about the company.

[@billdiehl156]

Looks like these are some very useful tools. I think I’ll get some eventually. Great video!

[@ShopRamblings]

Thanks

[@tpaulsmith7194]

Another practical, well presented review. Big fan. Thanks.

[@ShopRamblings]

Much appreciated!

[@vernsteinbrecker3759]

Am definitely going to check out these tools

[@ShopRamblings]

You won't regret it.

[@keithstickley7812]

Nice looking tools

[@ShopRamblings]

I was surprised at how accurate the thin rip jig made each piece. I look forward to using the pocket hole jig on my next project. They all three will be great additions to my tools.

[@markduggan3451]

They all look great.

[@ShopRamblings]

I agree

[@PapawsWorkshop-gd7hw]

Nice presentation! I'll just have to give Goingmake a try!

[@ShopRamblings]

Let me know what you think when you do.

[@TheKidFromYTown]

Goingmake has some good tools. I have the shelf pin jig, concealed hinge jig and the thin rip jig and I think all of them are good quality.

[@ShopRamblings]

I have them also. I have not had a single issue with any of their tools.

[@allenspain]

Great tools. Thanks for sharing your reviews

[@ShopRamblings]

Glad you like them!

[@tomlopez1960]

the 3d woodworking square looks handy. good talk.

[@ShopRamblings]

Thanks

[@EMWoodworking]

These tools look as high quality as any out. Definitely interested in these

[@ShopRamblings]

They have sent me several of their tools. Almost all of them I already had of a different brand. I have given away most all of my other one and kept the Goingmake ones. That should be enough to know my true feelings about the quality.

[@EMWoodworking]

@@ShopRamblings awesome. I just ordered the Thin Rip Jig

[@vincentkillewald9315]

I hope that they come out with a doweling jig!

[@ShopRamblings]

Going maker doesn't have one but this is the one I have. I like that it has a replaceable blade. So far I am still using the first side. It can be rotated 3 time before it has to be replaced. www.banggood.com/Adjustable-Electric-Drill-Truck-Circular-Auxiliary-Tool-5-or-16inch-to-3-or-4inch-Round-Wooden-Rod-Tenon-Imperial-p-1999499.html?cur_warehouse=CN&rmmds=search&p=J1182275583621202310&custlinkid=3979014

[@JohnC1]

Good, thorough reviews. Keep it up.

[@ShopRamblings]

Thanks, will do!

[@MrLapdog23]

Like the ne version especially rip guide and markings on squares

[@ShopRamblings]

Do you like the red or the black.

[@ShopRamblings]

Email me at [e-mail]

[@kevincinnamontoast3669]

Ramblings,you ain't lying.

[@ShopRamblings]

I try not to.

[@ravenheart1439]

I dunno I think kreg nailed the pocket hole thing by pure convince of the self clamping deal, be hard for any company to compete with that, that's what sells me on stuff is how fast and how accurate it is...

[@ShopRamblings]

I have owned Kregg pocket hole jigs for 15 years. I have had issues with several of their auto adjusting clamps. Most times, if I am doing multiple pocket holes, it is all in the same size material. I am not saying that Kregg doesn't make a quality tool. They warrantied every one of the clamps that stopped working. For the price and features, I like this one. If I needed one now, I would have no issue picking up a Kregg locally.

[@doodlecoma]

when i have tools like that with a loose pin i just use a bit of bluetack to hold them together

[@ShopRamblings]

That is a good idea.

[@doodlecoma]

great channel, keep it up i wonder if i could get their tools here in australia

[@ShopRamblings]

You would think since they are shipped here they could be shipped there.

[@cdl1701]

Wish they had a version of the square in metric.

[@ShopRamblings]

I am surprised they don't.

[@vincentkillewald9315]

The pocket hole jig looks much better than Wen.

[@ShopRamblings]

I don't have the WEN, so I can't compare them, but this one is the best one I have used. I have used several different ones.

[@travelwell8098]

When you drew that 30 degree line on the 4x4... did you measure the angle to confirm that it was 30?

[@ShopRamblings]

I did, and it was.

[@travelwell8098]

@@ShopRamblings Good to know...thanks for the response!

[@corlisdobson8053]

That is some awesome demo and reviewing…you speak my language too…where are you from brother? By the way, any of those ‘red’ tools you don’t want to keep, I’ll be happy to give my address…you can send ‘em my way… Seriously, thanks for being you.

[@ShopRamblings]

I was born and raised in Mississippi. Since then, I have lived all over the world. For the last 24 years, I have called Florida home.

[@gmopney7638]

1/8” is .125 not .140 so I don’t see how that is a win

[@ShopRamblings]

Because I was just setting it to a random spot. I did not worry about dailing it into an exact number. So, to quickly set it to around 1/8. Then, to cut three strips that are exactly the same is a win. If I needed them to be an exact size, I could adjust from there. Being able to repeatedly cut strips the same size it what the jig is for.