How Disc Harrow Are Manufactured || Production Process of Disc Harrow for Agriculture !

[@tractortopgear7025]

Good work

[@Raufalktrekalwarkr]

السلام علیکم ماشاءاللّٰه‎ ماشاءاللّٰه‎ ماشاءاللّٰه‎

[@AJKir123]

Another lovely clean organized workshop.

[@ocwaldos]

Я со сварщика просто в шоке, он наверное терминатор какой то. Варить без перчаток это просто жесть. Интересно посмотреть на его руки они наверное как барбекю😲😲😲 У них одна жёлтая перчатка на весь завод👍✌️

[@tsk-spkirill5359]

как тому закручивающему по ноге вмажет

[@flashgarage]

Я дома вообще никогда краги не одеваю, всегда с голыми руками. Летом ещё и в шортах без футболки)

[@СергейПетров-э2х2ш]

Ему на пенсию через 2 года, по состоянию зрения, а ты о каких-то перчатках!😂😂😂

[@KATEKNIK001]

Also visit my channel, friends, there are interesting things to see

[@ЕгорБаишев-т5ж]

Здоровья всем, на совесть делают, всё из толстого металла, у нас сейчас сельхоз агрегаты вроде хороши но, сделаны из проф труб и просто водяных труб. Через сезон новые начинают рассыпаться. СССР ровские из такого толстого металла сделаны.

[@talhamalik5735]

Nice video

[@CC-jj7ne]

It’s hard to beat a true running offset disc. It cut clean and smooth. Not many people know that you can turn to the left without raising them. Turn right and you ruin your day. The heavy gang shaft is very nice as well. Nice work. Your officially “Sodbuster” status.

[@mrmyorky5634]

They looked to be doing a good job of harrowing to me. I'm no farmer but it was interesting to learn that it will cut ok when turning left but not right?

[@gathobeevens2644]

You are Amazing Pakistani people, you have my deep respect !! Blessings!!!

[@godfreypoon5148]

I've used one of these machines. It was a harrowing experience.

[@josephpadula2283]

Don’t try to Cultivate my approval…

[@mothersgate3533]

Nice video hello all you

[@nathanscott7910]

I liked the way he starts the spot weld staring straight at it. He will be totally blind before he’s forty years old. That’s not to mention the skin cancer from not wearing gloves while welding! I guess it’s the sacrifice one makes to feed your family. I grew up working with my dad in the construction business. We mainly remodeled houses. I’ve stood in clouds of asbestos so thick you could write your name in the air without even a dust mask. However, that was before the dangers of it were known.

[@joseejuarez340]

ⁿ

[@francomtz7115]

What you don't know won't hurt you it's what politicians know then rule on it that kills you Biden president, why ask for more risks??

[@ModMokkaMatti]

All he needs is some of those magical power pajamas and a pair of bedazzled safety sandals. Then he'll forget that he is stumbling around in eternal darkness.

[@brian_2040]

@@ModMokkaMatti I got people looking at me weird cause of the laugh reading that comment. Lol thank you

[@plowmaster1206]

"This business has gone '0' days without a fatality"

[@MrTonyballony]

There’s nothing quite like precision guess work

[@kimjw001]

9:40 blew my mind.

[@austinlane5533]

@@kimjw001 I was thinking about that 15 seconds for the entire 40 min video.. eyeball precision

[@kimjw001]

@@austinlane5533 with that margin of error, I'd like to see some parts that they made but didn't meet speciation.

[@KATEKNIK001]

Amazing results, how much is the selling price of the tool. Waiting for the next video

[@АлексейДемин-г8е]

У вас есть чему поучиться.молодцы мужики.

[@tarekessed3036]

Great people great work. Thanks.

[@ЕвгенийКравченко-к3д]

Не что не говори а Искромётчик толковый тип

[@davidtaai6576]

good job guys, what amps and rod you're using for welding?

[@jjohnson2553]

I'd be interested in seeing some test done on those welds. I haven't seen anyone bevel the metal on a butt joint or packing grease in a single bearing before installing them.

[@francomtz7115]

No different than the welds on farm equipment all around the world and especially USA the cheaper with high inflation and and so called electric cars..

[@lol_surprisefoo]

As having been a Boiler Maker and Certified Structural Welder and most recently a Certified Welding Inspector, all of the welding observed in these videos out of India/Pakistan make me cringe. They are creative and hard working, but you can throw "structural integrity" and safety out the door.

[@hernankeller4016]

NINGUN BISEL

[@sheilamartin3854]

This is Awesome,can I get a quote on 3 different size of Discs pls

[@Farm_fab]

I've done a fair amount of welding, and I know that having jigs and fixtures is a real time saver. It also helps assure that each finished piece is just like the original in alignment and function.

[@familycornell8866]

You would think they would make a jig for the different steps. Also clean up that shop. Investing in a plasma cutter might also save time but what the heck. Its more fun to do it the hard way

[@michaelmccarthy4615]

Its the way they do things. The hard way.... That makes watching so fascinating. The industrial revolution left them in the dust.

[@KATEKNIK001]

Also visit my channel, friends, there are interesting things to see

[@ghostdevill]

Well if you ain,t have all the tools to make the job easy and you wanna be selling products for a decent price. You ain,t got much choice to do it the hard way.

[@francomtz7115]

@@michaelmccarthy4615 they might just leave us in the industrial world in the dust, in a time of war.

[@Анеботакоеже]

За сварщиком нужен присмотр, что бы всё проварил !!!

[@Yeti809]

Да ладно! Шпаклёвка и палец все исправят!! 🤣

[@Анеботакоеже]

@@Yeti809 Песок в подшипниках, надёжность. 😃

[@СергейПетров-э2х2ш]

За ним токарь присмотрит!😂😂😂

[@M.V.2]

Bella realizzazione. Bel lavoro. 🛠️🔩🔧👍👍👍👍

[@RogowskiBubba0864]

We can comment a lot on all those Pakistani workshops but instead of crying under a coconut palmtree while wailing 'our families are hungry' those guys work like hell and with initiatives. My compliments, gentleman 😎

[@richardwalker1168]

Hell yeah that’s true! They bust there asses to feed and take care of there families. I’ve watched a ton of these videos. I could very easily be friends with these guys! Tired of all the ones commenting negative crap!

[@horstmuller7512]

You might think this is Pakistan, but it's actually Bradford, UK. Some are filmed in Luton as well.

[@chabeloramon2289]

Que precio tendrá una rastra de esas asta acá asta México

[@researchandbuild1751]

My brother works in a factory in the USA building these and he uses actual safety gear... It's not rocket science

[@thething3067]

😞មក

[@csnelling4]

Why weren’t the taper roller bearings packed with grease during assembly 🤔good video 🇬🇧

[@DiscoveringSkills]

They used the grease but we mis that part

[@plowmaster1206]

The machine fails before the dry bearings

[@plowmaster1206]

Plus no seals anyway

[@covinaca5312]

Blue hat and Hawaii tee shirt have probably built a lot of these. Nice to see some good work come out of one of these shops.

[@adnansgarage]

Paining on the rust was the best part

[@germanico4401]

ya no es maestro es un verdadero artista este maestro.......un verdadero capo.........y sin elementos de seguridad y rapido.........felicitaciones✌✌aqui si que se trabaja........y sin chistar............

[@johnbanfield4179]

These men are real craftsmen but, they work in almost cavemen conditions. I don't know how they can work every day in flip flop shoes without losing toes. I have great respect for them.

[@dogbone1065]

Love these videos, could you do one just strictly on accidents on the job site.? There has to be some amputations and broken bones.👍😱

[@piperdoug428]

very interesting engineering

[@DrywalldecoracionessA1]

Épico 🙌🙌

[@reizanphotography7467]

destê we sax be. Hostayên hêja ne. her bijîn.

[@brinks2100]

outstanding workplace health & safety going on here

[@Олег-ш5м5т]

Челябинские мужики нервно курят в сторонке .

[@DavidHuber63]

Great job Brother 👍🏻❤️🙏🏽

[@ewanbaxter9199]

Just wondering if those bearings come packed with grease because they didn't use any, unless they dismantle it to pack the bearings later.

[@sisyphus9252]

I saw that, no grease zerks for pins or bearings either. No bushings for the pins.

[@ewanbaxter9199]

@@sisyphus9252 With 99% of these repair shops none of them grease the bearings no matter how big the machine is, a few squirt a little oil in them but how long would that last.

[@НИКОЛАЙТАРАСОВ-ш9ч]

РЕБЯТА КТО НИБУТЬ ПРОБОВАЛ ВАРИТЬ ЭЛЕКТРОСВАРКОЙ В ФУТБОЛКЕ , ГОЛЫМИ РУКАМИ , И В СЛАНЦАХ ?

[@Анеботакоеже]

И без маски 😃

[@Colenuiogyrez]

Да, я постоянно так варю, работать можно, только летит окалина и искры на руки, но терпимо, потом только все чешется

[@flashgarage]

Я так всегда дома и варю. Бывает и в одних шортах

[@СергейПетров-э2х2ш]

А ты посмотри из чего маска... Стенка канистры! Это тебе не хамелеон какой то!😂😂😂 Пипец парня жалко, к 50 уже калека , а ведь видно работящий! Ему бы возможности!

[@dicasmaneiras4431]

Que grade boa! Gostei!

[@Yeti809]

Шпаклевать кривые швы--это гениально!! 🤣 У нас на работе есть индийский станок, пришёл такой весь гладенький! А потом как начал облезать! Оказалось он сплошняком весь шпаклёваный прямо по ржавчине! Ребята они рукастые, но чтобы добиться от них качества это надо стоять над ними и пинать постоянно. И платить нормально.

[@АндрейК-б4о]

Это Пакистан

[@Yeti809]

@@АндрейК-б4о да я знаю. Вы думаете в Индии по другому?

[@KonbOronb]

Тому шо шпаклюют не сымая перстней!)))

[@Yeti809]

@@KonbOronb да у этих бедолаг как никаких перстней.Если только у хозяина да заказчиков.

[@geebopbaluba1591]

I wonder how long those bearings will last going dry of grease?

[@bohhica1]

Exactly!

[@sugumarsugu2508]

@@bohhica1 a r s c l b c a s f c c c c l m a t s a s a t o a r s c l b k s f

[@gobob63]

not packing the bearings with grease before installing?

[@covinaca5312]

Looks like they pack them just before the install. Grease squeezed out when the assembly was installed on the shaft.

[@ВладКурочкин-у3р]

А шести метровые дисковые бороны делаете ? )

[@lnexusl11rus]

По-любому )))

[@TheStuffMade]

It's nice work, but it looks a little flimsy for something that will be worked hard in a field.

[@theessexhunter1305]

It is hardly nice work TBH, this no look tacking with stick welding is just stupid as you can't see. I weld a lot repairing farm kit and if you can't see you can't weld.

[@DiscoveringSkills]

Thanks

[@theessexhunter1305]

@@DiscoveringSkills Thanks...lol

[@TheStuffMade]

@@theessexhunter1305 yeah, I grew up on a farm, lots of stick welding practice and driving a tractors for 14 hours straight.. lol

[@theessexhunter1305]

@@TheStuffMade A 500 hp cat put a big crack in that headstock, I plated it up and working since it was fixed this end of harvest... kzbin.info/www/bejne/omeXdX6IbN9koZY

[@DavidHernandez-ce1dk]

Desde chiapas mexici fwlicidades trabajan increible

[@yamamasnaana6781]

💯💯ماشاء الله مجرات

[@danielaumirall4093]

Hi frens, from the Argentina, thanks

[@คนต่างเมือง]

very good👍👍👍

[@MrJohn714]

looks very strong!

[@frnd7ocy6]

This workshop is like: for all hands out of boredom. The welder is GOD level - without looking, he cooks the structural elements of the harrow. The headscarves of the reinforcement design are simply a masterpiece. How much do these beautiful pieces of equipment cost? Wrap me a couple🤣

[@jackking5567]

Basic O rings used as bearing seals. Also, not a single grease nipple was added to the equipment.

[@kristianskov4841]

What's the use...? Farmers never maintain anything, anyway.. So might as well save on production cost.. 😄😄

[@stuartwarrick6444]

Would love a couple of these guys working in our workshop making kit for our farm save paying £60,000 for a new 6 meter carrier.

[@Exmechanic0.2]

Nyc

[@albertoramirezmota1948]

Excelente trabajo 👍👏

[@denniskazich7559]

Not enough grease on new bearings. Should have been packed before installing. Then maybe grease fitting to give it a shot once and awhile for good measure lol.

[@KATEKNIK001]

Also visit my channel, friends, there are interesting things to see

[@rosewhite---]

Welder guy is a star craftsman! I'm not too sure if all the thin plate reinforcing couldn't be improved on.

[@KATEKNIK001]

Also visit my channel, friends, there are interesting things to see

[@parkfarm233]

That welder is a legend!!! Does it with his eyes closed and upside down hidden from view.

[@maliksaeedengineeringworks]

Very nice

[@dusterowner9978]

did they not grease those bearings?

[@atmm89]

wow, they do not grease these bearing, wonder how long they will last

[@ursus141]

szkoła druciarstwa jak sie patrzy :-0

[@geordiemagpie8785]

Well done, Better then a Monden car plant Washington (UK).

[@CarlosGarcia-zi1wp]

Excelentísimo trabajadores felicitaciones son admirables grandísima mano de obra 👍👍👍👍 saludos de argentina

[@KATEKNIK001]

Also visit my channel, friends, there are interesting things to see

[@АлександрШмачилин-т6е]

Интересно, на этот плуг наверное и чертежи есть. Кто разрабатывал?

[@שלמהעמר-ז6ר]

אתם הרוסים לא פחות מוכשרים.

[@Yeti809]

@@שלמהעמר-ז6ר неожиданно)) Благодарю!

[@РУСЛАНСВЕТЛАКОВ-в2о]

Наш аналог БДТ 7

[@Анеботакоеже]

Чертежи в голове у каждого пакистанца с рождения.

[@AleksandrGalitskiy]

Это бдт. Борона дисковая тяжёлая

[@antoninjedla2177]

TY ŘEMESLNÍCI DĚLAJÍ DOBŘE ALE TEN NESKUTEČNÝ BORDEL CO TAM MAJÍ. TO JE DĚS! TAM MUSÍ BÝT ZBITEČNÝCH ÚRAZU NA PRACOVIŠTI!

[@somalia5019]

Thanks

[@Farm_fab]

If they don't have enough time to do a good job of packing those bearings with grease, when will they get back to it?

[@KATEKNIK001]

Also visit my channel, friends, there are interesting things to see

[@Анеботакоеже]

Масло в подшипники набить нормально не надо ?

[@ivan_filimonoff]

от избытка смазки все поломки

[@michaelmccarthy4615]

How much do they charge for a hand made disc harrow ?

[@DiscoveringSkills]

Maximum 1500 dollar 💵

[@michaelmccarthy4615]

@@DiscoveringSkills wow, that would be a tough price to match if produced anywhere in the world.... incredible...

[@Professionalusedtractor]

Nice

[@venkatsai3432]

Plz make a full video on tractor trolley making

[@horstmuller7512]

Every year these shops are creating a new army of handless, feetless and blinded beggars.

[@kamiabadi4554]

Maybe each parts should be painted first , then put them together........

[@АлексМудров]

Молодцы ребята знают свое дело,,,,🇷🇺👍🛠️

[@D-cki]

Spawy bez jakości kolego, malowanie tragedia, a warsztat pracy....

[@cmsracing]

Quite the contraption! Not only were the bearings NOT packed with grease but there are no fittings to regrease them in the future!

[@stusue9733]

Hey if apple gluing the battery into a phone is acceptable, why hate on someone for no grease fittings?(I assume I cant use the n word)

[@fls360]

This insures future generations get to work on the harrow.

[@Raj-nh3fc]

So this is a 16 disc harrow? We had a Massey Ferguson 14 disc harrow and it was very light and effective. Could be lifted with the tractor hydraulic, no need for rubber wheels to drag it.

[@javedsultan4830]

heavier one digs deeper.. which is important

[@shaktisingh2660]

how much price 9×9 herrow

[@שלמהעמר-ז6ר]

אומנים אתם. אתם מוכשרים!!!

[@eliseobareiro3597]

Excelente trabajo amigo son geniales usd de que país

[@malikzafarmajoka8118]

From pakistan

[@allen3272]

That's no doubt very well built! Good job!

[@pekru-ushuya7269]

See all

[@michaelmccarthy4615]

Its the engineering that will determine the life span

[@KATEKNIK001]

Also visit my channel, friends, there are interesting things to see

[@joaoandre7543]

Esses hominho trabalha sem proteção nenhuma de chinelo de dedo no meio de muitas ferragens

[@larrykluckoutdoors8227]

Nice disk, what would that cost in US dollars?

[@DiscoveringSkills]

Maximum 1500 dollars 💵

[@larrykluckoutdoors8227]

@@DiscoveringSkills Not a bad price, thank you very much

[@patrickngwah8204]

How much is the har

[@skillstruckrepairer3880]

good

[@jamesSmith-im5jo]

I don’t know what’s going to give out first, his eyes or his welds, but I would wager on the welds.

[@researchandbuild1751]

My brother works in the USA at a factory welding these

[@giggling_boatswain]

The view of the workshop is reminiscent of the post-apocalypse from STALKER.

[@timmayer8723]

Mans got to make a living, if for no other reason than to feed himself but if he has a family of eight, all bets are off. He needs to do whatever he can with no concern for the mortal danger to himself. Arc weld without eye protection, wear open toe sandles around heavy dangerous equipment. Third world existence demands these sacrifices with no complaints. No work is too exhausting or dangerous. These men must work until they drop to the ground unable to rise from the dirt and filth of their work place, at which time ten more men will apply for his job and the cycle repeats itself.

[@hernankeller4016]

SON LOS PRIVILIGEGIOS DEL PATRIARCADO SEGUN LAS FEMINISTAS

[@davidsteinicke5454]

Every single one is definitely bespoke

[@dhillon.5620]

Bahi sahiab yr app k Pak ke mesrtri etne kabail hian yr fir Disc harrow ki look achhi nhi bante hamare edr India main Disc harrow ki look bahut achhi hoti hai

[@robertallen3441]

11:55 Just noticed the guard has found its permanent home.

[@larsharris]

When welding C channel to box. Why not use clamp from start? He tacks, then clamps? I dislike watching welding on computer.

[@scoldedcat]

I wonder if they receive workers compensation when they get injured at work

[@ЕвгенийКравченко-к3д]

Россельмаш нервно курит в уголку

[@Анеботакоеже]

Да, месяц будут собирать они.

[@flashgarage]

@@Анеботакоеже вы там были? Или так, попиздеть?

[@D-cki]

😆

[@СалкынУлданай]

Они там на глаз сделают

[@fls360]

Here, all ISO rules are in compliance

[@michaelmccarthy4615]

I watch these videos and realize I need to get busy... I have too much equipment surrounding me as a hobby just sitting idle. 1st world problems.

[@rajasthantruckvlog7154]

Indian truck is best

[@researchandbuild1751]

The guys welding hold up a little shield meanwhile their hands are exposed welcome to sunburned hands

[@jeffryblackmon4846]

I like the dude with the hammer beating on that wrench.

[@mrmyorky5634]

Don't forget that we in the western world were the inventors the 'Flogging' spanner' Every railway workshop and shipyard used them. Most of them have a squared off hitting face forged at the other end opposite the jaws.

[@autodidattaebasta1943]

Number one workplace safety in the world. The country of Lilliput