Perfect timing. My driver's side D2 window is AFU. Thanks for all your help Mike!
@BritannicaRestorations10 ай бұрын
Glad to help
@the_hamrat Жыл бұрын
I remember mine broke on Christmas Eve last year and I replaced the mechanism whilst I had COVID. Damn near killed me, but satisfying to do
@jameskerr5756 Жыл бұрын
When you're supposed to be working but too distracted watching Mike trap his pinky - Pardon! Bit of grease now and jobsagoodin. Handy that you had the D1 part kicking around as the newness had definitely faded on the original one.
@BritannicaRestorations Жыл бұрын
It sure had - quite a common problem
@jonbuckley1495 Жыл бұрын
I remember on the D1, the window frame distorts, went through 3 regulators before I worked it out
@6970958 Жыл бұрын
Done both of my front door. Very common problem. There is a guy on KZbin who welds a uk 10p piece in place of the roller and lubes it well.
@BritannicaRestorations Жыл бұрын
Yes, in the D1 days aI used to find the right sized washers in the shop and weld the pin back in
@noelbishop5153 Жыл бұрын
Best time I ever had doing that job was 20 minutes..
@bradtottman1425 Жыл бұрын
Hi you can use a nylon bread board and cut I square to fit the guide slot and drill a hole in it and use a nut and bolt after drilling out the rivet on the arm as a repair..have done it a few times now…that’s provided you don’t have a spare disco 1 door just lying around…lol..😀
@BritannicaRestorations Жыл бұрын
Cool, thanks
@davidforbes6250 Жыл бұрын
Good fun Michael.
@BritannicaRestorations Жыл бұрын
It never ends = only came in for a starter motor...
@davidforbes6250 Жыл бұрын
@@BritannicaRestorations Hear that.
@jamescaron6465 Жыл бұрын
Try assembly lube to grease those bits. It adheres well and is thicker than regular lubricating oil
@BritannicaRestorations Жыл бұрын
Grease is the word - or so I was told....
@googlegok9637 Жыл бұрын
Plastic brakes down overt time , it is a huge problem for modern classics. Even you replace the plastics , it is still 20 years and not all plastic is petroleum tolerant.
@BritannicaRestorations Жыл бұрын
Tell me about it!
@graham-martin5847 Жыл бұрын
stick it in like lol not a bad impression of one of gods people pmsl geordie boys
@secpac58chichi Жыл бұрын
LOL - you have no idea what you have bitten off with a NA LR Disco - this thing will nickel and dime you to death - this isn't a diesel with wind up windows -
@BritannicaRestorations Жыл бұрын
Yeap - only came in because nobody wanted to change the starter motor. Now a myriad of other 'issues'
@grahameroberts8109 Жыл бұрын
Been there done that a few times. When I’m doubt, read the manual. I just bought new ones. Lol. 🙈🙏🦘