Dishwasher Circulation Pump Continuity Testing

[@pipi7731]

Good video very helpful. Thanks. Add more like this one. Like the door switches and he circuits to test the drain pump.

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@danaa-]

Ah yes i love dangie bros and their 10v1000$ videos, such nostalgua

[@cerealboxgaming4349]

literally why is this in their playlist lmao

[@Ibrahim-b7z9g]

I was thinking that also ​@@cerealboxgaming4349

[@w2msa]

Your video was helpful, thank you.

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@arvinmistry9744]

How can i test Bosch supper Dishwasher ciculation pump ,3 phase 58v

[@coltderringer7149]

My pump is reading 6.8 ohms. Does that sound like it should be replaced?

[@Zeddify]

no

[@UrosNahberger]

i have 120 ohm. do i have to replace it?

[@BringItOn31124]

Or if it's like my Frigidaire, turn power off to dishwasher. Remove front access panel, remove wire harness to circulation pump. Check for continuity.

[@kitchenexperts5251]

sir indesit prime dishwasher a4 error

[@michaelbluejay]

Repair Clinic videos never mention that it's unnecessary to remove the electrical cover and disconnect / reconnect electrical wires if your dishwasher is plug-in and not hardwired.

[@cricrisuper4676]

Nor simply work this when pulled-out?..

[@heidihe5500]

If I get over 5 MΩ, does it mean I need a new replacement part?

[@Ohsnapsy]

Yes, too much resistance

[@iowndisworld7346]

I might as well just replace the circulation pump at that point 😂

[@shannongodinez9979]

Nah it’s really easy to get to & get off… I’m wondering if it’s worth the trouble to open it up and see if it’s clogged first… doesn’t look as daunting as this does now! 🤦🏻‍♀️😩🤣

[@slucas8258]

So... if pump is good and still doesn't work... then what? Control board? Or? Not a very helpful video.

[@mikes1798]

If the motor is good, the pump itself might be clogged with food/plate/glass/hard water deposits preventing the pump from spinning right if at all. In that case, you should be able to find videos on how to clean the recirculating pump if your machine allows access to it. Mine doesn’t but several models do.