Distributor Installation & Timing Suzuki Engine! Geo Tracker Sidekick Vitara Samurai Escudo X90

[@CruzGarage]

If I ever make it big, I’m buying you your dream car. The amount of time and money you have saved me with your detailed vids. Not only that but also have helped me take care of my moms tracker as well. Thank you so much Tony!

[@willyrara9115]

I love your explanation,it was very clear for me as I new to the engine, thanks alot

[@gabegold6380]

Hwy 83 thank you there couldn’t be a better shop teacher. brought my 87 samurai back from the dead . Much love

[@Hwy83SUZUKI]

Great to hear!

[@juliendebury1519]

First time changing my timing belt and adjusting valve clearance on my Samy. Had to remove the distributor to get the cam cover off and I spent half of the afternoon to figure out why it wouldn't start ! Almost set that bast*** on fire as I was loosing my nerve ! You just saved my day man !!🙏

[@melvingrimes7886]

A hand full of tools new belt and tensioner spring. 30 minutes of my time and the timing belt is replaced . Man I loved doing timing belts on them.

[@spencergrubb5153]

I've done timing on a few Miatas and figured my new X90 would be similar. Nope! Really appreciate this video!

[@ChadAtkinsonFXArtist]

Thank you! I’ve managed to get my Carry running because of your video

[@Mike-zb7ts]

Tesla, Westinghouse, Edison...Tony. You are a legend, man. Thanks for the great content.

[@TripSmith]

Great info there! Thanks for sharing as I'm about to be messing with the timing on my 1.6 8V....

[@Hwy83SUZUKI]

Get after it! 🙂🍻

[@Meche697]

I recommend you add the links to the other videos mentioned in this one, distributor seal and timing light, in the description. Once again, AWESOME!

[@aceofshades1]

I just got done engine swapping a new to me engine in my tracker - If I was smart I would have changed the distributor seal while it was out .... I'm not a smart man Jenny

[@jeanariley7759]

Great video thanks! My mechanic didn't even know it was set off the 4th cylinder. Thought #1. Ugh And because of that was calling #4 the number one...double ugh!!!

[@speedfreak8200]

Did that make it 180° out ?

[@JorgeCastillo-rd7cc]

gracias; por compartir estas buenas especificaciones para removeer el distribuidor de encendido; bendiciones

[@rustybaxter9606]

Awesome video. Have you got a video on replacing or fixing the clutch on the 86 Samarai?

[@ruancarlodop]

Save button pressed!

[@alcidescarrillo5035]

Great video! Did you make the video showing how to use the timing light and diagnostic plug?

[@codyswilley]

Have you found a video yet on the timing light. I need to replace head gasket on my 1.6 8v and I can tell the timing is off.

[@richtertrim35]

Dealing with this right now. Need the timing video too

[@VictorSanchez-mh2db]

Thank you, good class a good video, thanks again.

[@moisesojedamendoza1666]

Enorabunas muy bien explicado gracias máquina

[@speedfreak8200]

My Fishing Gear is in the Kitchen!!

[@craigsampson3386]

Hi Tony any chance you could do an interior steering column removal video? Fairly sure I need to move mine out of the way, to put my reassembled manual pedal box back in as theres not enough room 🤔 cheers.

[@marty000000000]

Where is the video for the 96 tracker 16v using the timing light?

[@elmelsonn]

Thanks buddy !

[@ZeroAnde]

Genial! Tienes el pinout?

[@vonimanitrarandriamanamisa3641]

Hi, do you know if there are any big differences between the coil on plug engine version and the one with distributor? I'm wondering if parts are interchangeable..

[@oczuk32]

So I have the sprockets all lined up. But why do I have my #1 on compression and my #4 on exhaust? Do I need to rotate the cam a whole 360?

[@jaredt4393]

Hi, thanks for your video! When my timing tabs are lined up, the no. 4 cylinder is at TDC on the exhaust cycle. So lining the distributor up there wouldn’t make sense. But my car isn’t starting did I do something wrong?

[@Hwy83SUZUKI]

#4 need to be on compression stroke

[@nathanielfawley4595]

Hey I’m having a hard time I’ve done everything step by step but I can’t get it to start it’s trying to like it’s so close but just won’t follow the rest the way through

[@LawlessOffroadAdventures]

Soo, would timing make it sound like it's draining battery? Like a power draw with no fire? Any help would be greatly appreciated, about to pull distributor on my 1.6L8V hope this vid does the trick.

[@robormiston2841]

Tony I bought the o ring for the destributer but I couldn't get it to fit. Is there a trick to getting the destributer to seat past the new I ring? 95 Geo Tracker 1.6 liter 16 valve 5 speed.

[@OmarSoto-b8i]

Greetings! I have an 85 Suzuki SJ410, is it the same job to get it on time?

[@EduardoGarcia-wx4re]

Question !!! After a machine shop recut the head the timing belt isn’t tight anymore 1.3 engine Any recommendations?

[@lozomex]

Here’s a question way up from British Columbia (love your channel BTW). I’m doing a head gasket job and I did a bad thang…I removed the rotor from the distributor and later realized that it can go back in one of three different positions…WTF!!! Never seen that before. Do you have any advice for me?? 😮

[@Hwy83SUZUKI]

@lozomex doesn't matter as long as you point it at #4 as shown in video 👍

[@lozomex]

Just to clarify….the rotor can be installed back onto the shaft in three different spots which means that the pickup under the rotor has three unique positions.

[@tarrantmather2406]

hey mate my g16a 16v starts missing bad once hot but runs sweet cold could this be timing? cheers

[@ThiorBoure]

Thanks

[@rubenmarquez8777]

My engine is pinging and thanks to your video I have no idea how my car is running at all! The firing order does not match yours been driving like this for months 🤦 have a pretty good idea what’s happening now

[@dragosmoga1]

Hi and thank you for this video....verry helpful. I forgot the order of ignition ( the wire order from distributor to cilinders...). Can you help me with an answer? Thank you in advance! By the way, escuse my english...is not perfect. Have a nice day!

[@Hwy83SUZUKI]

1-3-4-2

[@dragosmoga1]

@@Hwy83SUZUKI thank you so much!!! I'll try it next week to see if it's work. In Romania we have a diffrent distributor (construction meaning).... I hope that your answer will work and will help me...! Have a good one! Thanks' again!

[@dragosmoga1]

@@Hwy83SUZUKIYuhuuu!!! it's working!! Thank you so much for your help!!!

[@MrGoneja]

Easier to pull it out and spin the rotor instead of the gear, you can feel the gear engagement makes moving one tooth easy.

[@strangeoaks]

What’s up Tony

[@Gurt_Outdoors]

Tension bolt is not 84ft lbs just snapped mine

[@Hwy83SUZUKI]

Inch pounds kzbin.info/www/bejne/hXLWZKiEn7mLp6ssi=TxGKrFcIdoIDrohT

[@rolandoroquefl2836]

That number 4 piston is number 1 looked at real dealers book find number one injector shows it in the position where your number four piston is at what people call number four piston is Ashley number 1 piston 😊 same with cap

[@Hwy83SUZUKI]

You're confusing #1 "injector" for #1 cylinder. Look at the factory service manual again and you'll see your mistake

[@Warzone209er]

Whats the firing order for 1.6 8valve tracker

[@RussDickens-xr5ou]

1342

[@billywade5924]

YES!!!!! A ha hahaha fuck YES victory

[@walterquispe9038]

En español puedes hablar

[@OqueyetoWilliams]

My car engine just ran and died

[@Hwy83SUZUKI]

@@OqueyetoWilliams oh really?

[@OqueyetoWilliams]

Well it’s an 1997 Suzuki Escudo and I tried starting it just run for a couple seconds and then misfired and then die